Improvement of baby stepping:
1) Fix of stepper control timing 2) Load / restore baby stepping after 9 point bed leveling using the planner instead of the questionable baby stepping routine. Improvement of the menu system: Use a shared menuData union to preserve memory. Adaptation of baby stepping and edit menus to menuData. Improvement of the "Toshiba FlashAir" status display. Don't force IP address query on each display refresh when in the "Support" menu. Bugfix of the baby stepping menu: Show the correct value instead of zero when the baby stepping menu is entered. New feature: Bed leveling adjustment at left / right / front / rear side. The bed adjustment feature is accessible from the Settings menu and as L R F B codes of the G80 code.
This commit is contained in:
bubnikv
parent
f17aa3b0a2
commit
077560ce4c
@ -5,7 +5,7 @@
|
||||
#include "Configuration_prusa.h"
|
||||
|
||||
// Firmware version
|
||||
#define FW_version "3.0.6-rc2"
|
||||
#define FW_version "3.0.6-rc3"
|
||||
|
||||
#define FW_PRUSA3D_MAGIC "PRUSA3DFW"
|
||||
#define FW_PRUSA3D_MAGIC_LEN 10
|
||||
@ -33,6 +33,15 @@
|
||||
|
||||
#define EEPROM_FARM_MODE (EEPROM_BED_CALIBRATION_Z_JITTER-4)
|
||||
|
||||
// Correction of the bed leveling, in micrometers.
|
||||
// Maximum 50 micrometers allowed.
|
||||
// Bed correction is valid if set to 1. If set to zero or 255, the successive 4 bytes are invalid.
|
||||
#define EEPROM_BED_CORRECTION_VALID (EEPROM_FARM_MODE-1)
|
||||
#define EEPROM_BED_CORRECTION_LEFT (EEPROM_BED_CORRECTION_VALID-1)
|
||||
#define EEPROM_BED_CORRECTION_RIGHT (EEPROM_BED_CORRECTION_LEFT-1)
|
||||
#define EEPROM_BED_CORRECTION_FRONT (EEPROM_BED_CORRECTION_RIGHT-1)
|
||||
#define EEPROM_BED_CORRECTION_REAR (EEPROM_BED_CORRECTION_FRONT-1)
|
||||
|
||||
// Currently running firmware, each digit stored as uint16_t.
|
||||
// The flavor differentiates a dev, alpha, beta, release candidate or a release version.
|
||||
#define EEPROM_FIRMWARE_VERSION_FLAVOR (FW_PRUSA3D_MAGIC_LEN+6)
|
||||
|
||||
@ -362,16 +362,7 @@ void Config_ResetDefault()
|
||||
max_jerk[Z_AXIS] = DEFAULT_ZJERK;
|
||||
max_jerk[E_AXIS] = DEFAULT_EJERK;
|
||||
add_homing[X_AXIS] = add_homing[Y_AXIS] = add_homing[Z_AXIS] = 0;
|
||||
#ifdef ULTIPANEL
|
||||
plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP;
|
||||
plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP;
|
||||
plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
|
||||
absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP;
|
||||
absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
|
||||
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
|
||||
|
||||
|
||||
#endif
|
||||
#ifdef ENABLE_AUTO_BED_LEVELING
|
||||
zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
|
||||
#endif
|
||||
|
||||
@ -235,6 +235,8 @@ byte b[2];
|
||||
int value;
|
||||
};
|
||||
|
||||
#define BABYSTEP_LOADZ_BY_PLANNER
|
||||
|
||||
// Number of baby steps applied
|
||||
int babystepLoadZ = 0;
|
||||
|
||||
@ -1902,7 +1904,11 @@ void process_commands()
|
||||
|
||||
// Reset baby stepping to zero, if the babystepping has already been loaded before. The babystepsTodo value will be
|
||||
// consumed during the first movements following this statement.
|
||||
#ifdef BABYSTEP_LOADZ_BY_PLANNER
|
||||
shift_z(float(babystepLoadZ) / float(axis_steps_per_unit[Z_AXIS]));
|
||||
#else
|
||||
babystepsTodoZsubtract(babystepLoadZ);
|
||||
#endif /* BABYSTEP_LOADZ_BY_PLANNER */
|
||||
babystepLoadZ = 0;
|
||||
|
||||
saved_feedrate = feedrate;
|
||||
@ -2286,6 +2292,27 @@ void process_commands()
|
||||
#endif // ENABLE_AUTO_BED_LEVELING
|
||||
|
||||
#ifdef MESH_BED_LEVELING
|
||||
case 30: // G30 Single Z Probe
|
||||
{
|
||||
st_synchronize();
|
||||
// TODO: make sure the bed_level_rotation_matrix is identity or the planner will get set incorectly
|
||||
setup_for_endstop_move();
|
||||
|
||||
feedrate = homing_feedrate[Z_AXIS];
|
||||
|
||||
find_bed_induction_sensor_point_z(-10.f, 3);
|
||||
SERIAL_PROTOCOLRPGM(MSG_BED);
|
||||
SERIAL_PROTOCOLPGM(" X: ");
|
||||
MYSERIAL.print(current_position[X_AXIS], 5);
|
||||
SERIAL_PROTOCOLPGM(" Y: ");
|
||||
MYSERIAL.print(current_position[Y_AXIS], 5);
|
||||
SERIAL_PROTOCOLPGM(" Z: ");
|
||||
MYSERIAL.print(current_position[Z_AXIS], 5);
|
||||
SERIAL_PROTOCOLPGM("\n");
|
||||
clean_up_after_endstop_move();
|
||||
}
|
||||
break;
|
||||
|
||||
/**
|
||||
* G80: Mesh-based Z probe, probes a grid and produces a
|
||||
* mesh to compensate for variable bed height
|
||||
@ -2323,7 +2350,11 @@ void process_commands()
|
||||
|
||||
// Reset baby stepping to zero, if the babystepping has already been loaded before. The babystepsTodo value will be
|
||||
// consumed during the first movements following this statement.
|
||||
#ifdef BABYSTEP_LOADZ_BY_PLANNER
|
||||
shift_z(float(babystepLoadZ) / float(axis_steps_per_unit[Z_AXIS]));
|
||||
#else
|
||||
babystepsTodoZsubtract(babystepLoadZ);
|
||||
#endif /* BABYSTEP_LOADZ_BY_PLANNER */
|
||||
babystepLoadZ = 0;
|
||||
|
||||
// Cycle through all points and probe them
|
||||
@ -2412,6 +2443,81 @@ void process_commands()
|
||||
kill(kill_message);
|
||||
}
|
||||
clean_up_after_endstop_move();
|
||||
|
||||
// Apply Z height correction aka baby stepping before mesh bed leveing gets activated.
|
||||
if(card.sdprinting || is_usb_printing )
|
||||
{
|
||||
if(eeprom_read_byte((unsigned char*)EEPROM_BABYSTEP_Z_SET) == 0x01)
|
||||
{
|
||||
// End of G80: Apply the baby stepping value.
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z,&babystepLoadZ);
|
||||
#if 0
|
||||
SERIAL_ECHO("Z baby step: ");
|
||||
SERIAL_ECHO(babystepLoadZ);
|
||||
SERIAL_ECHO(", current Z: ");
|
||||
SERIAL_ECHO(current_position[Z_AXIS]);
|
||||
SERIAL_ECHO("correction: ");
|
||||
SERIAL_ECHO(float(babystepLoadZ) / float(axis_steps_per_unit[Z_AXIS]));
|
||||
SERIAL_ECHOLN("");
|
||||
#endif
|
||||
#ifdef BABYSTEP_LOADZ_BY_PLANNER
|
||||
shift_z(- float(babystepLoadZ) / float(axis_steps_per_unit[Z_AXIS]));
|
||||
#else
|
||||
babystepsTodoZadd(babystepLoadZ);
|
||||
#endif /* BABYSTEP_LOADZ_BY_PLANNER */
|
||||
}
|
||||
}
|
||||
|
||||
bool eeprom_bed_correction_valid = eeprom_read_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID) == 1;
|
||||
for (uint8_t i = 0; i < 4; ++ i) {
|
||||
unsigned char codes[4] = { 'L', 'R', 'F', 'B' };
|
||||
long correction = 0;
|
||||
if (code_seen(codes[i]))
|
||||
correction = code_value_long();
|
||||
else if (eeprom_bed_correction_valid) {
|
||||
unsigned char *addr = (i < 2) ?
|
||||
((i == 0) ? (unsigned char*)EEPROM_BED_CORRECTION_LEFT : (unsigned char*)EEPROM_BED_CORRECTION_RIGHT) :
|
||||
((i == 2) ? (unsigned char*)EEPROM_BED_CORRECTION_FRONT : (unsigned char*)EEPROM_BED_CORRECTION_REAR);
|
||||
correction = eeprom_read_int8(addr);
|
||||
}
|
||||
if (correction == 0)
|
||||
continue;
|
||||
float offset = float(correction) * 0.001f;
|
||||
if (fabs(offset) > 0.101f) {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ECHOPGM("Excessive bed leveling correction: ");
|
||||
SERIAL_ECHO(offset);
|
||||
SERIAL_ECHOLNPGM(" microns");
|
||||
} else {
|
||||
switch (i) {
|
||||
case 0:
|
||||
for (uint8_t row = 0; row < 3; ++ row) {
|
||||
mbl.z_values[row][1] += 0.5f * offset;
|
||||
mbl.z_values[row][0] += offset;
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
for (uint8_t row = 0; row < 3; ++ row) {
|
||||
mbl.z_values[row][1] += 0.5f * offset;
|
||||
mbl.z_values[row][2] += offset;
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
for (uint8_t col = 0; col < 3; ++ col) {
|
||||
mbl.z_values[1][col] += 0.5f * offset;
|
||||
mbl.z_values[0][col] += offset;
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
for (uint8_t col = 0; col < 3; ++ col) {
|
||||
mbl.z_values[1][col] += 0.5f * offset;
|
||||
mbl.z_values[2][col] += offset;
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
mbl.upsample_3x3();
|
||||
mbl.active = 1;
|
||||
current_position[X_AXIS] = X_MIN_POS+0.2;
|
||||
@ -2420,16 +2526,6 @@ void process_commands()
|
||||
world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[X_AXIS], current_position[Z_AXIS], current_position[E_AXIS], XY_AXIS_FEEDRATE, active_extruder);
|
||||
st_synchronize();
|
||||
|
||||
if(card.sdprinting || is_usb_printing )
|
||||
{
|
||||
if(eeprom_read_byte((unsigned char*)EEPROM_BABYSTEP_Z_SET) == 0x01)
|
||||
{
|
||||
// End of G80: Apply the baby stepping value.
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z,&babystepLoadZ);
|
||||
babystepsTodoZadd(babystepLoadZ);
|
||||
}
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
@ -4650,9 +4746,10 @@ void clamp_to_software_endstops(float target[3])
|
||||
int n_segments = 0;
|
||||
|
||||
if (mbl.active) {
|
||||
float len = abs(dx) + abs(dy) + abs(dz);
|
||||
float len = abs(dx) + abs(dy);
|
||||
if (len > 0)
|
||||
n_segments = int(floor(len / 30.f));
|
||||
// Split to 3cm segments or shorter.
|
||||
n_segments = int(ceil(len / 30.f));
|
||||
}
|
||||
|
||||
if (n_segments > 1) {
|
||||
@ -4669,7 +4766,10 @@ void clamp_to_software_endstops(float target[3])
|
||||
}
|
||||
// The rest of the path.
|
||||
plan_buffer_line(x, y, z, e, feed_rate, extruder);
|
||||
set_current_to_destination();
|
||||
current_position[X_AXIS] = x;
|
||||
current_position[Y_AXIS] = y;
|
||||
current_position[Z_AXIS] = z;
|
||||
current_position[E_AXIS] = e;
|
||||
}
|
||||
#endif // MESH_BED_LEVELING
|
||||
|
||||
@ -4688,9 +4788,9 @@ void prepare_move()
|
||||
}
|
||||
else {
|
||||
#ifdef MESH_BED_LEVELING
|
||||
mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder);
|
||||
mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply*(1./(60.f*100.f)), active_extruder);
|
||||
#else
|
||||
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder);
|
||||
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply*(1./(60.f*100.f)), active_extruder);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
@ -135,6 +135,61 @@ const char * const MSG_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_BED_PL
|
||||
};
|
||||
|
||||
const char MSG_BED_CORRECTION_FRONT_EN[] PROGMEM = "Front side um";
|
||||
const char MSG_BED_CORRECTION_FRONT_CZ[] PROGMEM = "Vpredu [um]";
|
||||
const char * const MSG_BED_CORRECTION_FRONT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_BED_CORRECTION_FRONT_EN,
|
||||
MSG_BED_CORRECTION_FRONT_CZ,
|
||||
MSG_BED_CORRECTION_FRONT_EN,
|
||||
MSG_BED_CORRECTION_FRONT_EN,
|
||||
MSG_BED_CORRECTION_FRONT_EN
|
||||
};
|
||||
|
||||
const char MSG_BED_CORRECTION_LEFT_EN[] PROGMEM = "Left side um";
|
||||
const char MSG_BED_CORRECTION_LEFT_CZ[] PROGMEM = "Vlevo [um]";
|
||||
const char * const MSG_BED_CORRECTION_LEFT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_BED_CORRECTION_LEFT_EN,
|
||||
MSG_BED_CORRECTION_LEFT_CZ,
|
||||
MSG_BED_CORRECTION_LEFT_EN,
|
||||
MSG_BED_CORRECTION_LEFT_EN,
|
||||
MSG_BED_CORRECTION_LEFT_EN
|
||||
};
|
||||
|
||||
const char MSG_BED_CORRECTION_MENU_EN[] PROGMEM = "Bed level correct";
|
||||
const char MSG_BED_CORRECTION_MENU_CZ[] PROGMEM = "Korekce podlozky";
|
||||
const char * const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_BED_CORRECTION_MENU_EN,
|
||||
MSG_BED_CORRECTION_MENU_CZ,
|
||||
MSG_BED_CORRECTION_MENU_EN,
|
||||
MSG_BED_CORRECTION_MENU_EN,
|
||||
MSG_BED_CORRECTION_MENU_EN
|
||||
};
|
||||
|
||||
const char MSG_BED_CORRECTION_REAR_EN[] PROGMEM = "Rear side um";
|
||||
const char MSG_BED_CORRECTION_REAR_CZ[] PROGMEM = "Vzadu [um]";
|
||||
const char * const MSG_BED_CORRECTION_REAR_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_BED_CORRECTION_REAR_EN,
|
||||
MSG_BED_CORRECTION_REAR_CZ,
|
||||
MSG_BED_CORRECTION_REAR_EN,
|
||||
MSG_BED_CORRECTION_REAR_EN,
|
||||
MSG_BED_CORRECTION_REAR_EN
|
||||
};
|
||||
|
||||
const char MSG_BED_CORRECTION_RESET_EN[] PROGMEM = "Reset";
|
||||
const char * const MSG_BED_CORRECTION_RESET_LANG_TABLE[1] PROGMEM = {
|
||||
MSG_BED_CORRECTION_RESET_EN
|
||||
};
|
||||
|
||||
const char MSG_BED_CORRECTION_RIGHT_EN[] PROGMEM = "Right side um";
|
||||
const char MSG_BED_CORRECTION_RIGHT_CZ[] PROGMEM = "Vpravo [um]";
|
||||
const char * const MSG_BED_CORRECTION_RIGHT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_BED_CORRECTION_RIGHT_EN,
|
||||
MSG_BED_CORRECTION_RIGHT_CZ,
|
||||
MSG_BED_CORRECTION_RIGHT_EN,
|
||||
MSG_BED_CORRECTION_RIGHT_EN,
|
||||
MSG_BED_CORRECTION_RIGHT_EN
|
||||
};
|
||||
|
||||
const char MSG_BED_DONE_EN[] PROGMEM = "Bed done";
|
||||
const char MSG_BED_DONE_CZ[] PROGMEM = "Bed OK.";
|
||||
const char MSG_BED_DONE_IT[] PROGMEM = "Piatto fatto.";
|
||||
|
||||
@ -44,6 +44,18 @@ extern const char* const MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_BABYSTEP_Z_NOT_SET LANG_TABLE_SELECT(MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE)
|
||||
extern const char* const MSG_BED_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_BED LANG_TABLE_SELECT(MSG_BED_LANG_TABLE)
|
||||
extern const char* const MSG_BED_CORRECTION_FRONT_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_BED_CORRECTION_FRONT LANG_TABLE_SELECT(MSG_BED_CORRECTION_FRONT_LANG_TABLE)
|
||||
extern const char* const MSG_BED_CORRECTION_LEFT_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_BED_CORRECTION_LEFT LANG_TABLE_SELECT(MSG_BED_CORRECTION_LEFT_LANG_TABLE)
|
||||
extern const char* const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_BED_CORRECTION_MENU LANG_TABLE_SELECT(MSG_BED_CORRECTION_MENU_LANG_TABLE)
|
||||
extern const char* const MSG_BED_CORRECTION_REAR_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_BED_CORRECTION_REAR LANG_TABLE_SELECT(MSG_BED_CORRECTION_REAR_LANG_TABLE)
|
||||
extern const char* const MSG_BED_CORRECTION_RESET_LANG_TABLE[1];
|
||||
#define MSG_BED_CORRECTION_RESET LANG_TABLE_SELECT_EXPLICIT(MSG_BED_CORRECTION_RESET_LANG_TABLE, 0)
|
||||
extern const char* const MSG_BED_CORRECTION_RIGHT_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_BED_CORRECTION_RIGHT LANG_TABLE_SELECT(MSG_BED_CORRECTION_RIGHT_LANG_TABLE)
|
||||
extern const char* const MSG_BED_DONE_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_BED_DONE LANG_TABLE_SELECT(MSG_BED_DONE_LANG_TABLE)
|
||||
extern const char* const MSG_BED_HEATING_LANG_TABLE[LANG_NUM];
|
||||
|
||||
@ -313,4 +313,11 @@
|
||||
#define MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prosim aktualizujte."
|
||||
#define MSG_BABYSTEP_Z_NOT_SET "Tiskarna nebyla jeste zkalibrovana. Spustte kalibracni G-kod a doladte Z."
|
||||
|
||||
#define MSG_BED_CORRECTION_MENU "Korekce podlozky"
|
||||
#define MSG_BED_CORRECTION_LEFT "Vlevo [um]"
|
||||
#define MSG_BED_CORRECTION_RIGHT "Vpravo [um]"
|
||||
#define MSG_BED_CORRECTION_FRONT "Vpredu [um]"
|
||||
#define MSG_BED_CORRECTION_REAR "Vzadu [um]"
|
||||
#define MSG_BED_CORRECTION_RESET "Reset"
|
||||
|
||||
#endif // LANGUAGE_EN_H
|
||||
|
||||
@ -307,4 +307,11 @@
|
||||
|
||||
#define MSG_BABYSTEP_Z_NOT_SET "Printer has not been calibrated yet. Run calibration G-code to adjust Z height."
|
||||
|
||||
#define MSG_BED_CORRECTION_MENU "Bed level correct"
|
||||
#define MSG_BED_CORRECTION_LEFT "Left side um"
|
||||
#define MSG_BED_CORRECTION_RIGHT "Right side um"
|
||||
#define MSG_BED_CORRECTION_FRONT "Front side um"
|
||||
#define MSG_BED_CORRECTION_REAR "Rear side um"
|
||||
#define MSG_BED_CORRECTION_RESET "Reset"
|
||||
|
||||
#endif // LANGUAGE_EN_H
|
||||
|
||||
@ -2081,3 +2081,11 @@ bool scan_bed_induction_points(int8_t verbosity_level)
|
||||
enable_z_endstop(endstop_z_enabled);
|
||||
return true;
|
||||
}
|
||||
|
||||
// Shift a Z axis by a given delta.
|
||||
void shift_z(float delta)
|
||||
{
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] - delta, current_position[E_AXIS], homing_feedrate[Z_AXIS]/40, active_extruder);
|
||||
st_synchronize();
|
||||
plan_set_z_position(current_position[Z_AXIS]);
|
||||
}
|
||||
|
||||
@ -167,4 +167,7 @@ extern bool is_bed_z_jitter_data_valid();
|
||||
// Useful for visualizing the behavior of the bed induction detector.
|
||||
extern bool scan_bed_induction_points(int8_t verbosity_level);
|
||||
|
||||
// To replace loading of the babystep correction.
|
||||
extern void shift_z(float delta);
|
||||
|
||||
#endif /* MESH_BED_CALIBRATION_H */
|
||||
|
||||
@ -1030,7 +1030,7 @@ void babystep(const uint8_t axis,const bool direction)
|
||||
//perform step
|
||||
WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
|
||||
{
|
||||
float x=1./float(axis+1)/float(axis+2); //wait a tiny bit
|
||||
volatile float x=1./float(axis+1)/float(axis+2); //wait a tiny bit
|
||||
}
|
||||
WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);
|
||||
|
||||
@ -1049,7 +1049,7 @@ void babystep(const uint8_t axis,const bool direction)
|
||||
//perform step
|
||||
WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
|
||||
{
|
||||
float x=1./float(axis+1)/float(axis+2); //wait a tiny bit
|
||||
volatile float x=1./float(axis+1)/float(axis+2); //wait a tiny bit
|
||||
}
|
||||
WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
|
||||
|
||||
@ -1075,7 +1075,7 @@ void babystep(const uint8_t axis,const bool direction)
|
||||
#endif
|
||||
//wait a tiny bit
|
||||
{
|
||||
float x=1./float(axis+1); //absolutely useless
|
||||
volatile float x=1./float(axis+1); //absolutely useless
|
||||
}
|
||||
WRITE(Z_STEP_PIN, INVERT_Z_STEP_PIN);
|
||||
#ifdef Z_DUAL_STEPPER_DRIVERS
|
||||
|
||||
@ -21,8 +21,60 @@ int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added t
|
||||
|
||||
extern int lcd_change_fil_state;
|
||||
|
||||
//Function pointer to menu functions.
|
||||
typedef void (*menuFunc_t)();
|
||||
|
||||
struct EditMenuParentState
|
||||
{
|
||||
//prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings.
|
||||
menuFunc_t prevMenu;
|
||||
uint16_t prevEncoderPosition;
|
||||
};
|
||||
|
||||
union MenuData
|
||||
{
|
||||
struct BabyStep
|
||||
{
|
||||
// 29B total
|
||||
int8_t status;
|
||||
int babystepMem[3];
|
||||
float babystepMemMM[3];
|
||||
} babyStep;
|
||||
|
||||
struct SupportMenu
|
||||
{
|
||||
// 6B+16B=22B total
|
||||
int8_t status;
|
||||
bool is_flash_air;
|
||||
uint8_t ip[4];
|
||||
char ip_str[3*4+3+1];
|
||||
} supportMenu;
|
||||
|
||||
struct AdjustBed
|
||||
{
|
||||
// 6+13=19B
|
||||
// editMenuParentState is used when an edit menu is entered, so it knows
|
||||
// the return menu and encoder state.
|
||||
struct EditMenuParentState editMenuParentState;
|
||||
int8_t status;
|
||||
int8_t left;
|
||||
int8_t right;
|
||||
int8_t front;
|
||||
int8_t rear;
|
||||
int left2;
|
||||
int right2;
|
||||
int front2;
|
||||
int rear2;
|
||||
} adjustBed;
|
||||
|
||||
// editMenuParentState is used when an edit menu is entered, so it knows
|
||||
// the return menu and encoder state.
|
||||
struct EditMenuParentState editMenuParentState;
|
||||
};
|
||||
|
||||
// State of the currently active menu.
|
||||
// C Union manages sharing of the static memory by all the menus.
|
||||
union MenuData menuData = { 0 };
|
||||
|
||||
union Data
|
||||
{
|
||||
@ -46,33 +98,6 @@ int farm_status = 0;
|
||||
|
||||
bool menuExiting = false;
|
||||
|
||||
/* Configuration settings */
|
||||
int plaPreheatHotendTemp;
|
||||
int plaPreheatHPBTemp;
|
||||
int plaPreheatFanSpeed;
|
||||
|
||||
int absPreheatHotendTemp;
|
||||
int absPreheatHPBTemp;
|
||||
int absPreheatFanSpeed;
|
||||
|
||||
int ppPreheatHotendTemp = PP_PREHEAT_HOTEND_TEMP;
|
||||
int ppPreheatHPBTemp = PP_PREHEAT_HPB_TEMP;
|
||||
int ppPreheatFanSpeed = PP_PREHEAT_FAN_SPEED;
|
||||
|
||||
int petPreheatHotendTemp = PET_PREHEAT_HOTEND_TEMP;
|
||||
int petPreheatHPBTemp = PET_PREHEAT_HPB_TEMP;
|
||||
int petPreheatFanSpeed = PET_PREHEAT_FAN_SPEED;
|
||||
|
||||
int hipsPreheatHotendTemp = HIPS_PREHEAT_HOTEND_TEMP;
|
||||
int hipsPreheatHPBTemp = HIPS_PREHEAT_HPB_TEMP;
|
||||
int hipsPreheatFanSpeed = HIPS_PREHEAT_FAN_SPEED;
|
||||
|
||||
int flexPreheatHotendTemp = FLEX_PREHEAT_HOTEND_TEMP;
|
||||
int flexPreheatHPBTemp = FLEX_PREHEAT_HPB_TEMP;
|
||||
int flexPreheatFanSpeed = FLEX_PREHEAT_FAN_SPEED;
|
||||
|
||||
|
||||
|
||||
#ifdef FILAMENT_LCD_DISPLAY
|
||||
unsigned long message_millis = 0;
|
||||
#endif
|
||||
@ -83,9 +108,6 @@ static float manual_feedrate[] = MANUAL_FEEDRATE;
|
||||
|
||||
/* !Configuration settings */
|
||||
|
||||
//Function pointer to menu functions.
|
||||
typedef void (*menuFunc_t)();
|
||||
|
||||
uint8_t lcd_status_message_level;
|
||||
char lcd_status_message[LCD_WIDTH + 1] = ""; //////WELCOME!
|
||||
unsigned char firstrun = 1;
|
||||
@ -153,6 +175,8 @@ static void menu_action_setting_edit_float5(const char* pstr, float* ptr, float
|
||||
static void menu_action_setting_edit_float51(const char* pstr, float* ptr, float minValue, float maxValue);
|
||||
static void menu_action_setting_edit_float52(const char* pstr, float* ptr, float minValue, float maxValue);
|
||||
static void menu_action_setting_edit_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue);
|
||||
|
||||
/*
|
||||
static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, menuFunc_t callbackFunc);
|
||||
static void menu_action_setting_edit_callback_int3(const char* pstr, int* ptr, int minValue, int maxValue, menuFunc_t callbackFunc);
|
||||
static void menu_action_setting_edit_callback_float3(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
|
||||
@ -162,6 +186,7 @@ static void menu_action_setting_edit_callback_float5(const char* pstr, float* pt
|
||||
static void menu_action_setting_edit_callback_float51(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
|
||||
static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
|
||||
static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, menuFunc_t callbackFunc);
|
||||
*/
|
||||
|
||||
#define ENCODER_FEEDRATE_DEADZONE 10
|
||||
|
||||
@ -243,9 +268,6 @@ bool ignore_click = false;
|
||||
bool wait_for_unclick;
|
||||
uint8_t lcdDrawUpdate = 2; /* Set to none-zero when the LCD needs to draw, decreased after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) */
|
||||
|
||||
//prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings.
|
||||
menuFunc_t prevMenu = NULL;
|
||||
uint16_t prevEncoderPosition;
|
||||
//Variables used when editing values.
|
||||
const char* editLabel;
|
||||
void* editValue;
|
||||
@ -255,10 +277,15 @@ menuFunc_t callbackFunc;
|
||||
// place-holders for Ki and Kd edits
|
||||
float raw_Ki, raw_Kd;
|
||||
|
||||
static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder = 0, const bool feedback = true) {
|
||||
static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder = 0, const bool feedback = true, bool reset_menu_state = true) {
|
||||
if (currentMenu != menu) {
|
||||
currentMenu = menu;
|
||||
encoderPosition = encoder;
|
||||
if (reset_menu_state) {
|
||||
// Resets the global shared C union.
|
||||
// This ensures, that the menu entered will find out, that it shall initialize itself.
|
||||
memset(&menuData, 0, sizeof(menuData));
|
||||
}
|
||||
if (feedback) lcd_quick_feedback();
|
||||
|
||||
// For LCD_PROGRESS_BAR re-initialize the custom characters
|
||||
@ -643,8 +670,8 @@ static void lcd_move_menu_axis();
|
||||
|
||||
void lcd_preheat_pla()
|
||||
{
|
||||
setTargetHotend0(plaPreheatHotendTemp);
|
||||
setTargetBed(plaPreheatHPBTemp);
|
||||
setTargetHotend0(PLA_PREHEAT_HOTEND_TEMP);
|
||||
setTargetBed(PLA_PREHEAT_HPB_TEMP);
|
||||
fanSpeed = 0;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
@ -652,8 +679,8 @@ void lcd_preheat_pla()
|
||||
|
||||
void lcd_preheat_abs()
|
||||
{
|
||||
setTargetHotend0(absPreheatHotendTemp);
|
||||
setTargetBed(absPreheatHPBTemp);
|
||||
setTargetHotend0(ABS_PREHEAT_HOTEND_TEMP);
|
||||
setTargetBed(ABS_PREHEAT_HPB_TEMP);
|
||||
fanSpeed = 0;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
@ -661,8 +688,8 @@ void lcd_preheat_abs()
|
||||
|
||||
void lcd_preheat_pp()
|
||||
{
|
||||
setTargetHotend0(ppPreheatHotendTemp);
|
||||
setTargetBed(ppPreheatHPBTemp);
|
||||
setTargetHotend0(PP_PREHEAT_HOTEND_TEMP);
|
||||
setTargetBed(PP_PREHEAT_HPB_TEMP);
|
||||
fanSpeed = 0;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
@ -670,8 +697,8 @@ void lcd_preheat_pp()
|
||||
|
||||
void lcd_preheat_pet()
|
||||
{
|
||||
setTargetHotend0(petPreheatHotendTemp);
|
||||
setTargetBed(petPreheatHPBTemp);
|
||||
setTargetHotend0(PET_PREHEAT_HOTEND_TEMP);
|
||||
setTargetBed(PET_PREHEAT_HPB_TEMP);
|
||||
fanSpeed = 0;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
@ -679,8 +706,8 @@ void lcd_preheat_pet()
|
||||
|
||||
void lcd_preheat_hips()
|
||||
{
|
||||
setTargetHotend0(hipsPreheatHotendTemp);
|
||||
setTargetBed(hipsPreheatHPBTemp);
|
||||
setTargetHotend0(HIPS_PREHEAT_HOTEND_TEMP);
|
||||
setTargetBed(HIPS_PREHEAT_HPB_TEMP);
|
||||
fanSpeed = 0;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
@ -688,8 +715,8 @@ void lcd_preheat_hips()
|
||||
|
||||
void lcd_preheat_flex()
|
||||
{
|
||||
setTargetHotend0(flexPreheatHotendTemp);
|
||||
setTargetBed(flexPreheatHPBTemp);
|
||||
setTargetHotend0(FLEX_PREHEAT_HOTEND_TEMP);
|
||||
setTargetBed(FLEX_PREHEAT_HPB_TEMP);
|
||||
fanSpeed = 0;
|
||||
lcd_return_to_status();
|
||||
setWatch(); // heater sanity check timer
|
||||
@ -728,6 +755,23 @@ static void lcd_preheat_menu()
|
||||
|
||||
static void lcd_support_menu()
|
||||
{
|
||||
if (menuData.supportMenu.status == 0) {
|
||||
// Menu was entered.
|
||||
// Initialize its status.
|
||||
menuData.supportMenu.status = 1;
|
||||
menuData.supportMenu.is_flash_air = card.ToshibaFlashAir_GetIP(menuData.supportMenu.ip);
|
||||
if (menuData.supportMenu.is_flash_air)
|
||||
sprintf_P(menuData.supportMenu.ip_str, PSTR("%d.%d.%d.%d"),
|
||||
menuData.supportMenu.ip[0], menuData.supportMenu.ip[1],
|
||||
menuData.supportMenu.ip[2], menuData.supportMenu.ip[3]);
|
||||
} else if (menuData.supportMenu.is_flash_air &&
|
||||
menuData.supportMenu.ip[0] == 0 && menuData.supportMenu.ip[1] == 0 &&
|
||||
menuData.supportMenu.ip[2] == 0 && menuData.supportMenu.ip[3] == 0 &&
|
||||
++ menuData.supportMenu.status == 16) {
|
||||
// Waiting for the FlashAir card to get an IP address from a router. Force an update.
|
||||
menuData.supportMenu.status = 0;
|
||||
}
|
||||
|
||||
START_MENU();
|
||||
|
||||
MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
|
||||
@ -752,14 +796,10 @@ static void lcd_support_menu()
|
||||
MENU_ITEM(back, PSTR(__DATE__), lcd_main_menu);
|
||||
|
||||
// Show the FlashAir IP address, if the card is available.
|
||||
uint8_t ip[4];
|
||||
bool hasIP = card.ToshibaFlashAir_GetIP(ip);
|
||||
if (hasIP) {
|
||||
if (menuData.supportMenu.is_flash_air) {
|
||||
MENU_ITEM(back, PSTR("------------"), lcd_main_menu);
|
||||
MENU_ITEM(back, PSTR("FlashAir IP Addr:"), lcd_main_menu);
|
||||
char buf[30];
|
||||
sprintf_P(buf, PSTR("%d.%d.%d.%d"), ip[0], ip[1], ip[2], ip[3]);
|
||||
MENU_ITEM(back_RAM, buf, lcd_main_menu);
|
||||
MENU_ITEM(back_RAM, menuData.supportMenu.ip_str, lcd_main_menu);
|
||||
}
|
||||
|
||||
END_MENU();
|
||||
@ -1172,24 +1212,39 @@ static void lcd_move_z() {
|
||||
|
||||
|
||||
|
||||
static void _lcd_babystep(int axis, const char *msg) {
|
||||
static void _lcd_babystep(int axis, const char *msg)
|
||||
{
|
||||
if (menuData.babyStep.status == 0) {
|
||||
// Menu was entered.
|
||||
// Initialize its status.
|
||||
menuData.babyStep.status = 1;
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_X, &menuData.babyStep.babystepMem[0]);
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Y, &menuData.babyStep.babystepMem[1]);
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z, &menuData.babyStep.babystepMem[2]);
|
||||
menuData.babyStep.babystepMemMM[0] = menuData.babyStep.babystepMem[0]/axis_steps_per_unit[X_AXIS];
|
||||
menuData.babyStep.babystepMemMM[1] = menuData.babyStep.babystepMem[1]/axis_steps_per_unit[Y_AXIS];
|
||||
menuData.babyStep.babystepMemMM[2] = menuData.babyStep.babystepMem[2]/axis_steps_per_unit[Z_AXIS];
|
||||
lcdDrawUpdate = true;
|
||||
}
|
||||
|
||||
if (encoderPosition != 0)
|
||||
{
|
||||
CRITICAL_SECTION_START
|
||||
babystepsTodo[axis] += (int)encoderPosition;
|
||||
CRITICAL_SECTION_END
|
||||
babystepMem[axis] += (int)encoderPosition;
|
||||
babystepMemMM[axis] = babystepMem[axis]/axis_steps_per_unit[Z_AXIS];
|
||||
menuData.babyStep.babystepMem[axis] += (int)encoderPosition;
|
||||
menuData.babyStep.babystepMemMM[axis] = menuData.babyStep.babystepMem[axis]/axis_steps_per_unit[Z_AXIS];
|
||||
delay(50);
|
||||
encoderPosition = 0;
|
||||
lcdDrawUpdate = 1;
|
||||
lcdDrawUpdate = true;
|
||||
}
|
||||
if (lcdDrawUpdate) lcd_implementation_drawedit_2(msg, ftostr13ns(babystepMemMM[axis]));
|
||||
if (lcdDrawUpdate)
|
||||
lcd_implementation_drawedit_2(msg, ftostr13ns(menuData.babyStep.babystepMemMM[axis]));
|
||||
if (LCD_CLICKED || menuExiting) {
|
||||
// Only update the EEPROM when leaving the menu.
|
||||
EEPROM_save_B(
|
||||
(axis == 0) ? EEPROM_BABYSTEP_X : ((axis == 1) ? EEPROM_BABYSTEP_Y : EEPROM_BABYSTEP_Z),
|
||||
&babystepMem[axis]);
|
||||
&menuData.babyStep.babystepMem[axis]);
|
||||
}
|
||||
if (LCD_CLICKED) lcd_goto_menu(lcd_main_menu);
|
||||
}
|
||||
@ -1204,6 +1259,69 @@ static void lcd_babystep_z() {
|
||||
_lcd_babystep(Z_AXIS, (MSG_BABYSTEPPING_Z));
|
||||
}
|
||||
|
||||
static void lcd_adjust_bed();
|
||||
|
||||
static void lcd_adjust_bed_reset()
|
||||
{
|
||||
eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
|
||||
eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_LEFT , 0);
|
||||
eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, 0);
|
||||
eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_FRONT, 0);
|
||||
eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_REAR , 0);
|
||||
lcd_goto_menu(lcd_adjust_bed, 0, false);
|
||||
// Because we did not leave the menu, the menuData did not reset.
|
||||
// Force refresh of the bed leveling data.
|
||||
menuData.adjustBed.status = 0;
|
||||
}
|
||||
|
||||
#define BED_ADJUSTMENT_UM_MAX 50
|
||||
|
||||
static void lcd_adjust_bed()
|
||||
{
|
||||
if (menuData.adjustBed.status == 0) {
|
||||
// Menu was entered.
|
||||
// Initialize its status.
|
||||
menuData.adjustBed.status = 1;
|
||||
bool valid = false;
|
||||
menuData.adjustBed.left = menuData.adjustBed.left2 = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT);
|
||||
menuData.adjustBed.right = menuData.adjustBed.right2 = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT);
|
||||
menuData.adjustBed.front = menuData.adjustBed.front2 = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT);
|
||||
menuData.adjustBed.rear = menuData.adjustBed.rear2 = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR);
|
||||
if (eeprom_read_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID) == 1 &&
|
||||
menuData.adjustBed.left >= -BED_ADJUSTMENT_UM_MAX && menuData.adjustBed.left < BED_ADJUSTMENT_UM_MAX &&
|
||||
menuData.adjustBed.right >= -BED_ADJUSTMENT_UM_MAX && menuData.adjustBed.right < BED_ADJUSTMENT_UM_MAX &&
|
||||
menuData.adjustBed.front >= -BED_ADJUSTMENT_UM_MAX && menuData.adjustBed.front < BED_ADJUSTMENT_UM_MAX &&
|
||||
menuData.adjustBed.rear >= -BED_ADJUSTMENT_UM_MAX && menuData.adjustBed.rear < BED_ADJUSTMENT_UM_MAX)
|
||||
valid = true;
|
||||
if (! valid) {
|
||||
// Reset the values: simulate an edit.
|
||||
menuData.adjustBed.left2 = 0;
|
||||
menuData.adjustBed.right2 = 0;
|
||||
menuData.adjustBed.front2 = 0;
|
||||
menuData.adjustBed.rear2 = 0;
|
||||
}
|
||||
lcdDrawUpdate = true;
|
||||
eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
|
||||
}
|
||||
|
||||
if (menuData.adjustBed.left != menuData.adjustBed.left2)
|
||||
eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT, menuData.adjustBed.left = menuData.adjustBed.left2);
|
||||
if (menuData.adjustBed.right != menuData.adjustBed.right2)
|
||||
eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, menuData.adjustBed.right = menuData.adjustBed.right2);
|
||||
if (menuData.adjustBed.front != menuData.adjustBed.front2)
|
||||
eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT, menuData.adjustBed.front = menuData.adjustBed.front2);
|
||||
if (menuData.adjustBed.rear != menuData.adjustBed.rear2)
|
||||
eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR, menuData.adjustBed.rear = menuData.adjustBed.rear2);
|
||||
|
||||
START_MENU();
|
||||
MENU_ITEM(back, MSG_SETTINGS, lcd_settings_menu);
|
||||
MENU_ITEM_EDIT(int3, MSG_BED_CORRECTION_LEFT, &menuData.adjustBed.left2, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);
|
||||
MENU_ITEM_EDIT(int3, MSG_BED_CORRECTION_RIGHT, &menuData.adjustBed.right2, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);
|
||||
MENU_ITEM_EDIT(int3, MSG_BED_CORRECTION_FRONT, &menuData.adjustBed.front2, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);
|
||||
MENU_ITEM_EDIT(int3, MSG_BED_CORRECTION_REAR, &menuData.adjustBed.rear2, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);
|
||||
MENU_ITEM(function, MSG_BED_CORRECTION_RESET, lcd_adjust_bed_reset);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void lcd_adjust_z() {
|
||||
int enc_dif = 0;
|
||||
@ -1269,20 +1387,16 @@ void lcd_adjust_z() {
|
||||
if (lcd_clicked()) {
|
||||
fsm = cursor_pos;
|
||||
if (fsm == 1) {
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_X, &babystepMem[0]);
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Y, &babystepMem[1]);
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystepMem[2]);
|
||||
int babystepLoadZ = 0;
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystepLoadZ);
|
||||
CRITICAL_SECTION_START
|
||||
babystepsTodo[Z_AXIS] = babystepMem[2];
|
||||
babystepsTodo[Z_AXIS] = babystepLoadZ;
|
||||
CRITICAL_SECTION_END
|
||||
} else {
|
||||
babystepMem[0] = 0;
|
||||
babystepMem[1] = 0;
|
||||
babystepMem[2] = 0;
|
||||
|
||||
EEPROM_save_B(EEPROM_BABYSTEP_X, &babystepMem[0]);
|
||||
EEPROM_save_B(EEPROM_BABYSTEP_Y, &babystepMem[1]);
|
||||
EEPROM_save_B(EEPROM_BABYSTEP_Z, &babystepMem[2]);
|
||||
int zero = 0;
|
||||
EEPROM_save_B(EEPROM_BABYSTEP_X, &zero);
|
||||
EEPROM_save_B(EEPROM_BABYSTEP_Y, &zero);
|
||||
EEPROM_save_B(EEPROM_BABYSTEP_Z, &zero);
|
||||
}
|
||||
delay(500);
|
||||
}
|
||||
@ -1817,9 +1931,9 @@ void lcd_pick_babystep(){
|
||||
|
||||
if (lcd_clicked()) {
|
||||
fsm = cursor_pos;
|
||||
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z0+((fsm-1)*2),&babystepMem[2]);
|
||||
EEPROM_save_B(EEPROM_BABYSTEP_Z,&babystepMem[2]);
|
||||
int babyStepZ;
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z0+((fsm-1)*2),&babyStepZ);
|
||||
EEPROM_save_B(EEPROM_BABYSTEP_Z,&babyStepZ);
|
||||
eeprom_write_byte((unsigned char*)EEPROM_BABYSTEP_Z_SET, 0x01);
|
||||
delay(500);
|
||||
|
||||
@ -1947,7 +2061,7 @@ static void lcd_settings_menu()
|
||||
if (!isPrintPaused)
|
||||
{
|
||||
MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
|
||||
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
|
||||
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28 W"));
|
||||
}
|
||||
|
||||
if (SilentModeMenu == 0) {
|
||||
@ -1956,14 +2070,10 @@ static void lcd_settings_menu()
|
||||
MENU_ITEM(function, MSG_SILENT_MODE_ON, lcd_silent_mode_set);
|
||||
}
|
||||
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_X, &babystepMem[0]);
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Y, &babystepMem[1]);
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystepMem[2]);
|
||||
babystepMemMM[2] = babystepMem[2]/axis_steps_per_unit[Z_AXIS];
|
||||
|
||||
if (!isPrintPaused)
|
||||
{
|
||||
MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);//8
|
||||
MENU_ITEM(submenu, MSG_BED_CORRECTION_MENU, lcd_adjust_bed);
|
||||
}
|
||||
MENU_ITEM(submenu, MSG_LANGUAGE_SELECT, lcd_language_menu);
|
||||
if (!isPrintPaused)
|
||||
@ -2301,9 +2411,6 @@ static void lcd_main_menu()
|
||||
|
||||
if ( ( IS_SD_PRINTING || is_usb_printing ) && (current_position[Z_AXIS] < 0.5) )
|
||||
{
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_X, &babystepMem[0]);
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Y, &babystepMem[1]);
|
||||
EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystepMem[2]);
|
||||
MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);//8
|
||||
}
|
||||
|
||||
@ -2578,7 +2685,7 @@ void lcd_sdcard_menu()
|
||||
if (LCD_CLICKED) \
|
||||
{ \
|
||||
*((_type*)editValue) = ((_type)((int32_t)encoderPosition + minEditValue)) / scale; \
|
||||
lcd_goto_menu(prevMenu, prevEncoderPosition); \
|
||||
lcd_goto_menu(menuData.editMenuParentState.prevMenu, menuData.editMenuParentState.prevEncoderPosition, true, false); \
|
||||
} \
|
||||
} \
|
||||
void menu_edit_callback_ ## _name () { \
|
||||
@ -2587,33 +2694,33 @@ void lcd_sdcard_menu()
|
||||
} \
|
||||
static void menu_action_setting_edit_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue) \
|
||||
{ \
|
||||
prevMenu = currentMenu; \
|
||||
prevEncoderPosition = encoderPosition; \
|
||||
menuData.editMenuParentState.prevMenu = currentMenu; \
|
||||
menuData.editMenuParentState.prevEncoderPosition = encoderPosition; \
|
||||
\
|
||||
lcdDrawUpdate = 2; \
|
||||
currentMenu = menu_edit_ ## _name; \
|
||||
lcd_goto_menu(menu_edit_ ## _name, (*ptr) * scale - minEditValue, true, false); \
|
||||
\
|
||||
editLabel = pstr; \
|
||||
editValue = ptr; \
|
||||
minEditValue = minValue * scale; \
|
||||
maxEditValue = maxValue * scale - minEditValue; \
|
||||
encoderPosition = (*ptr) * scale - minEditValue; \
|
||||
}\
|
||||
/*
|
||||
static void menu_action_setting_edit_callback_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue, menuFunc_t callback) \
|
||||
{ \
|
||||
prevMenu = currentMenu; \
|
||||
prevEncoderPosition = encoderPosition; \
|
||||
menuData.editMenuParentState.prevMenu = currentMenu; \
|
||||
menuData.editMenuParentState.prevEncoderPosition = encoderPosition; \
|
||||
\
|
||||
lcdDrawUpdate = 2; \
|
||||
currentMenu = menu_edit_callback_ ## _name; \
|
||||
lcd_goto_menu(menu_edit_callback_ ## _name, (*ptr) * scale - minEditValue, true, false); \
|
||||
\
|
||||
editLabel = pstr; \
|
||||
editValue = ptr; \
|
||||
minEditValue = minValue * scale; \
|
||||
maxEditValue = maxValue * scale - minEditValue; \
|
||||
encoderPosition = (*ptr) * scale - minEditValue; \
|
||||
callbackFunc = callback;\
|
||||
}
|
||||
*/
|
||||
menu_edit_type(int, int3, itostr3, 1)
|
||||
menu_edit_type(float, float3, ftostr3, 1)
|
||||
menu_edit_type(float, float32, ftostr32, 100)
|
||||
@ -3048,11 +3155,13 @@ static void menu_action_setting_edit_bool(const char* pstr, bool* ptr)
|
||||
{
|
||||
*ptr = !(*ptr);
|
||||
}
|
||||
/*
|
||||
static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, menuFunc_t callback)
|
||||
{
|
||||
menu_action_setting_edit_bool(pstr, ptr);
|
||||
(*callback)();
|
||||
}
|
||||
*/
|
||||
#endif//ULTIPANEL
|
||||
|
||||
/** LCD API **/
|
||||
|
||||
@ -80,14 +80,6 @@
|
||||
#endif
|
||||
extern int lcd_commands_type;
|
||||
|
||||
extern int plaPreheatHotendTemp;
|
||||
extern int plaPreheatHPBTemp;
|
||||
extern int plaPreheatFanSpeed;
|
||||
|
||||
extern int absPreheatHotendTemp;
|
||||
extern int absPreheatHPBTemp;
|
||||
extern int absPreheatFanSpeed;
|
||||
|
||||
extern bool farm_mode;
|
||||
extern int farm_no;
|
||||
extern int farm_timer;
|
||||
|
||||
@ -658,10 +658,13 @@ static void lcd_implementation_status_screen()
|
||||
lcd.print(" ");
|
||||
|
||||
//Print the Z coordinates
|
||||
// if (custom_message_type != 1) {
|
||||
// Not in a bed calibration mode.
|
||||
lcd.setCursor(LCD_WIDTH - 8-2, 0);
|
||||
lcd.print(" Z");
|
||||
lcd.print(ftostr32sp(current_position[Z_AXIS] + 0.00001));
|
||||
lcd.print(' ');
|
||||
//}
|
||||
|
||||
//Print the Bedtemperature
|
||||
lcd.setCursor(0, 1);
|
||||
|
||||
@ -21,4 +21,15 @@ extern bool show_upgrade_dialog_if_version_newer(const char *version_string);
|
||||
|
||||
extern void update_current_firmware_version_to_eeprom();
|
||||
|
||||
|
||||
|
||||
inline int8_t eeprom_read_int8(unsigned char* addr) {
|
||||
uint8_t v = eeprom_read_byte(addr);
|
||||
return *reinterpret_cast<int8_t*>(&v);
|
||||
}
|
||||
|
||||
inline void eeprom_update_int8(unsigned char* addr, int8_t v) {
|
||||
eeprom_update_byte(addr, *reinterpret_cast<uint8_t*>(&v));
|
||||
}
|
||||
|
||||
#endif /* UTIL_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user