Remove duplicate string Belt status

Firmware/messages.c

@@ -16,6 +16,7 @@ const char MSG_BED_DONE[] PROGMEM_I1 = ISTR("Bed done"); ////
 const char MSG_BED_HEATING[] PROGMEM_I1 = ISTR("Bed Heating"); ////
 const char MSG_BED_LEVELING_FAILED_POINT_LOW[] PROGMEM_I1 = ISTR("Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."); ////c=20 r=5
 const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED[] PROGMEM_I1 = ISTR("XYZ calibration failed. Please consult the manual."); ////c=20 r=8
+const char MSG_BELT_STATUS[] PROGMEM_I1 = ISTR("Belt Status");////c=18
 const char MSG_CALIBRATE_Z_AUTO[] PROGMEM_I1 = ISTR("Calibrating Z"); ////c=20 r=2
 const char MSG_CARD_MENU[] PROGMEM_I1 = ISTR("Print from SD"); ////
 const char MSG_CONFIRM_NOZZLE_CLEAN[] PROGMEM_I1 = ISTR("Please clean the nozzle for calibration. Click when done."); ////c=20 r=8

Firmware/messages.h

@@ -17,6 +17,7 @@ extern const char MSG_BED_DONE[];
 extern const char MSG_BED_HEATING[];
 extern const char MSG_BED_LEVELING_FAILED_POINT_LOW[];
 extern const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED[];
+extern const char MSG_BELT_STATUS[];
 extern const char MSG_CALIBRATE_Z_AUTO[];
 extern const char MSG_CARD_MENU[];
 extern const char MSG_CONFIRM_NOZZLE_CLEAN[];

Firmware/ultralcd.cpp

@@ -1957,7 +1957,7 @@ static void lcd_menu_voltages()
 static void lcd_menu_belt_status()
 {
 	lcd_home();
-    lcd_printf_P(PSTR("%S\n" " X %d\n" " Y %d"), _i("Belt status"), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)));
+    lcd_printf_P(PSTR("%S\n" " X %d\n" " Y %d"), _T(MSG_BELT_STATUS), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)));
     menu_back_if_clicked();
 }
 #endif //TMC2130
@@ -2035,7 +2035,7 @@ static void lcd_preheat_menu()
 //! If TMC2130 defined
 //! 
 //! 	@code{.unparsed}
-//! 	| Belt status        |	MSG_MENU_BELT_STATUS
+//! 	| Belt status        |	MSG_BELT_STATUS
 //! @endcode
 //! 
 //! @code{.unparsed}
@@ -2159,7 +2159,7 @@ static void lcd_support_menu()
   MENU_ITEM_SUBMENU_P(_i("Sensor info"), lcd_menu_show_sensors_state);////MSG_INFO_SENSORS c=18 r=1
 
 #ifdef TMC2130
-  MENU_ITEM_SUBMENU_P(_i("Belt status"), lcd_menu_belt_status);////MSG_MENU_BELT_STATUS c=18
+  MENU_ITEM_SUBMENU_P(_T(MSG_BELT_STATUS), lcd_menu_belt_status);////MSG_BELT_STATUS c=18
 #endif //TMC2130
     
   MENU_ITEM_SUBMENU_P(_i("Temperatures"), lcd_menu_temperatures);////MSG_MENU_TEMPERATURES c=18 r=1

lang/lang_en.txt

@@ -103,7 +103,7 @@
 #MSG_BED
 "Bed"
 
-#MSG_MENU_BELT_STATUS c=18
+#MSG_BELT_STATUS c=18
 "Belt status"
 
 #MSG_RECOVER_PRINT c=20 r=2

lang/lang_en_cz.txt

@@ -138,7 +138,7 @@
 "Bed"
 "Podlozka"
 
-#MSG_MENU_BELT_STATUS c=18
+#MSG_BELT_STATUS c=18
 "Belt status"
 "Stav remenu"
 

lang/lang_en_de.txt

@@ -138,7 +138,7 @@
 "Bed"
 "Bett"
 
-#MSG_MENU_BELT_STATUS c=18
+#MSG_BELT_STATUS c=18
 "Belt status"
 "Gurtstatus"
 

lang/lang_en_es.txt

@@ -138,7 +138,7 @@
 "Bed"
 "Base"
 
-#MSG_MENU_BELT_STATUS c=18
+#MSG_BELT_STATUS c=18
 "Belt status"
 "Estado de correa"
 

lang/lang_en_fr.txt

@@ -138,7 +138,7 @@
 "Bed"
 "Lit"
 
-#MSG_MENU_BELT_STATUS c=18
+#MSG_BELT_STATUS c=18
 "Belt status"
 "Statut courroie"
 

lang/lang_en_it.txt

@@ -138,7 +138,7 @@
 "Bed"
 "Piano"
 
-#MSG_MENU_BELT_STATUS c=18
+#MSG_BELT_STATUS c=18
 "Belt status"
 "Stato cinghie"
 

lang/lang_en_pl.txt

@@ -138,7 +138,7 @@
 "Bed"
 "Stol"
 
-#MSG_MENU_BELT_STATUS c=18
+#MSG_BELT_STATUS c=18
 "Belt status"
 "Stan paskow"