3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

initial state of crash detect and filament sensor is ON

Browse Source 
slowed down return speed from crash detect after home
Added babystep apply after return from crash detect (don’t know if it’s accurate)
Added D10 to set machine to XYZ correctly calibrated
Added resume debug directive to mask additional menu item
This commit is contained in:
Robert Pelnar 2017-09-26 03:21:33 +02:00
parent 39f6e746dc
commit 73cc1c9c8a
3 changed files with 14 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
Firmware/Marlin_main.cpp
View File

@ -586,6 +586,7 @@ void crashdet_stop_and_save_print()
void crashdet_restore_print_and_continue()
{
restore_print_from_ram_and_continue(0); //XYZ = orig, E - no change
babystep_apply();
}
@ -614,7 +615,7 @@ void fsensor_restore_print_and_continue()
}
bool fsensor_enabled = false;
bool fsensor_enabled = true;
bool fsensor_ignore_error = true;
bool fsensor_M600 = false;
long fsensor_prev_pos_e = 0;
@ -1053,10 +1054,11 @@ void setup()
eeprom_write_byte((uint8_t*)EEPROM_UVLO, 0);
}
#ifndef DEBUG_DISABLE_STARTMSGS
check_babystep(); //checking if Z babystep is in allowed range
setup_uvlo_interrupt();
#ifndef DEBUG_DISABLE_STARTMSGS
if (calibration_status() == CALIBRATION_STATUS_ASSEMBLED ||
calibration_status() == CALIBRATION_STATUS_UNKNOWN) {
// Reset the babystepping values, so the printer will not move the Z axis up when the babystepping is enabled.
@ -5754,6 +5756,9 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
MYSERIAL.print("selectedSerialPort = ");
MYSERIAL.println(selectedSerialPort, DEC);
break;
case 10: // D10 - Tell the printer that XYZ calibration went OK
calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
break;
case 999:
{
MYSERIAL.println("D999 - crash");
@ -7298,7 +7303,7 @@ void stop_and_save_print_to_ram(float z_move, float e_move)
// card.closefile();
saved_printing = true;
sei();
if ((z_move != 0) || (e_move != 0)) { // extruder and z move
if ((z_move != 0) || (e_move != 0)) { // extruder or z move
#if 1
// Rather than calling plan_buffer_line directly, push the move into the command queue,
char buf[48];
@ -7332,7 +7337,7 @@ void restore_print_from_ram_and_continue(float e_move)
feedrate = saved_feedrate2; //restore feedrate
float e = saved_pos[E_AXIS] - e_move;
plan_set_e_position(e);
plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], saved_pos[Z_AXIS], saved_pos[E_AXIS], homing_feedrate[Z_AXIS], active_extruder);
plan_buffer_line(saved_pos[X_AXIS], saved_pos[Y_AXIS], saved_pos[Z_AXIS], saved_pos[E_AXIS], homing_feedrate[Z_AXIS]/10, active_extruder);
st_synchronize();
memcpy(current_position, saved_pos, sizeof(saved_pos));
memcpy(destination, current_position, sizeof(destination));

2
Firmware/tmc2130.cpp
View File

@ -56,7 +56,7 @@ uint32_t tmc2130_sg_pos[4] = {0, 0, 0, 0};
uint8_t sg_homing_axes_mask = 0x00;
bool tmc2130_sg_stop_on_crash = false;
bool tmc2130_sg_stop_on_crash = true;
bool tmc2130_sg_crash = false;
uint8_t tmc2130_diag_mask = 0x00;
uint16_t tmc2130_sg_err[4] = {0, 0, 0, 0};

6
Firmware/ultralcd.cpp
View File

@ -105,9 +105,9 @@ int8_t SDscrool = 0;
int8_t SilentModeMenu = 0;
int8_t FSensorStateMenu = 0;
int8_t FSensorStateMenu = 1;
int8_t CrashDetectMenu = 0;
int8_t CrashDetectMenu = 1;
extern void fsensor_enable();
extern void fsensor_disable();
@ -3869,10 +3869,12 @@ static void lcd_main_menu()
MENU_ITEM(back, MSG_WATCH, lcd_status_screen);
#ifdef RESUME_DEBUG
if (!saved_printing)
MENU_ITEM(function, PSTR("tst - Save"), lcd_menu_test_save);
else
MENU_ITEM(function, PSTR("tst - Restore"), lcd_menu_test_restore);
#ifdef //RESUME_DEBUG
#ifdef TMC2130_DEBUG
MENU_ITEM(function, PSTR("recover print"), recover_print);