3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'MK3' into MK3_Translations

Browse Source
This commit is contained in:
leptun 2019-09-12 16:28:36 +03:00
parent 795b1d1cf7
commit ae839aee31
43 changed files with 9185 additions and 5705 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
Firmware/Configuration.h
View File

@ -16,8 +16,8 @@ extern uint16_t nPrinterType;
extern PGM_P sPrinterName;
// Firmware version
#define FW_VERSION "3.8.0-RC2"
#define FW_COMMIT_NR 2639
#define FW_VERSION "3.8.0"
#define FW_COMMIT_NR 2684
// FW_VERSION_UNKNOWN means this is an unofficial build.
// The firmware should only be checked into github with this symbol.
#define FW_DEV_VERSION FW_VERSION_UNKNOWN
@ -113,11 +113,6 @@ extern PGM_P sPrinterName;
// #define PS_DEFAULT_OFF
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
//#define TEMP_SENSOR_1_AS_REDUNDANT
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
// Actual temperature must be close to target for this long before M109 returns success
#define TEMP_RESIDENCY_TIME 3 // (seconds)
#define TEMP_HYSTERESIS 5 // (degC) range of +/- temperatures considered "close" to the target one
@ -291,6 +286,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
#define Z_HEIGHT_HIDE_LIVE_ADJUST_MENU 2.0f
#define HOME_Z_SEARCH_THRESHOLD 0.15f // Threshold of the Z height in calibration
//============================= Bed Auto Leveling ===========================
//#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line)

12
Firmware/Configuration_adv.h
View File

@ -10,14 +10,6 @@
#endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check:
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperatureLCD_PROGRESS_BAR
// If the temperature has not increased at the end of that period, the target temperature is set to zero.
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature
// differ by at least 2x WATCH_TEMP_INCREASE
//#define WATCH_TEMP_PERIOD 40000 //40 seconds
//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds
#ifdef PIDTEMP
// this adds an experimental additional term to the heating power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated.
@ -400,10 +392,6 @@ const unsigned int dropsegments=5; //everything with less than this number of st
//============================= Define Defines ============================
//===========================================================================
#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT
#error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1"
#endif
#if EXTRUDERS > 1 && defined HEATERS_PARALLEL
#error "You cannot use HEATERS_PARALLEL if EXTRUDERS > 1"
#endif

9
Firmware/Marlin_main.cpp
View File

@ -2860,7 +2860,8 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
#endif //TMC2130
enable_endstops(endstops_enabled);
if (st_get_position_mm(Z_AXIS) == MESH_HOME_Z_SEARCH)
if ((st_get_position_mm(Z_AXIS) <= (MESH_HOME_Z_SEARCH + HOME_Z_SEARCH_THRESHOLD)) &&
(st_get_position_mm(Z_AXIS) >= (MESH_HOME_Z_SEARCH - HOME_Z_SEARCH_THRESHOLD)))
{
if (onlyZ)
{
@ -3261,7 +3262,7 @@ static void gcode_PRUSA_SN()
//! May be that's why the bad RAMBo's still produce some fan RPM reading, but not corresponding to reality
static void gcode_PRUSA_BadRAMBoFanTest(){
//printf_P(PSTR("Enter fan pin test\n"));
#if !defined(DEBUG_DISABLE_FANCHECK) && defined(FANCHECK) && defined(TACH_1) && TACH_1 >-1 && defined(IR_SENSOR)
#if !defined(DEBUG_DISABLE_FANCHECK) && defined(FANCHECK) && defined(TACH_1) && TACH_1 >-1
fan_measuring = false; // prevent EXTINT7 breaking into the measurement
unsigned long tach1max = 0;
uint8_t tach1cntr = 0;
@ -5891,7 +5892,6 @@ Sigma_Exit:
{
setTargetHotendSafe(code_value(), extruder);
}
setWatch();
break;
}
@ -6036,7 +6036,6 @@ Sigma_Exit:
}
#endif
setWatch();
codenum = _millis();
/* See if we are heating up or cooling down */
@ -10207,7 +10206,7 @@ void restore_print_from_ram_and_continue(float e_move)
else {
//not sd printing nor usb printing
}
printf_P(PSTR("ok\n")); //dummy response because of octoprint is waiting for this
SERIAL_PROTOCOLLNRPGM(MSG_OK); //dummy response because of octoprint is waiting for this
lcd_setstatuspgm(_T(WELCOME_MSG));
saved_printing = false;
}

2
Firmware/config.h
View File

@ -49,7 +49,7 @@
//#define LANG_MODE 0 // primary language only
#define LANG_MODE 1 // sec. language support
#define LANG_SIZE_RESERVED 0x2800 // reserved space for secondary language (10240 bytes)
#define LANG_SIZE_RESERVED 0x3000 // reserved space for secondary language (12288 bytes)
#endif //_CONFIG_H

56
Firmware/eeprom.cpp
View File

@ -97,14 +97,66 @@ void eeprom_init()
//! @brief Get default sheet name for index
//!
//! | index | sheetName |
//! | ----- | --------- |
//! | 0 | Smooth1 |
//! | 1 | Smooth2 |
//! | 2 | Textur1 |
//! | 3 | Textur2 |
//! | 4 | Custom1 |
//! | 5 | Custom2 |
//! | 6 | Custom3 |
//! | 7 | Custom4 |
//!
//! @param[in] index
//! @param[out] sheetName
void eeprom_default_sheet_name(uint8_t index, SheetName &sheetName)
{
static_assert(8 == sizeof(SheetName),"Default sheet name needs to be adjusted.");
sprintf_P(sheetName.c, PSTR("%-6.6S"), _T(MSG_SHEET));
sheetName.c[6] = '1' + index;
if (index < 2)
{
strcpy_P(sheetName.c, PSTR("Smooth"));
}
else if (index < 4)
{
strcpy_P(sheetName.c, PSTR("Textur"));
}
else
{
strcpy_P(sheetName.c, PSTR("Custom"));
}
switch (index)
{
case 0:
sheetName.c[6] = '1';
break;
case 1:
sheetName.c[6] = '2';
break;
case 2:
sheetName.c[6] = '1';
break;
case 3:
sheetName.c[6] = '2';
break;
case 4:
sheetName.c[6] = '1';
break;
case 5:
sheetName.c[6] = '2';
break;
case 6:
sheetName.c[6] = '3';
break;
case 7:
sheetName.c[6] = '4';
break;
default:
break;
}
sheetName.c[7] = '\0';
}

3
Firmware/lcd.cpp
View File

@ -189,9 +189,10 @@ static void lcd_begin(uint8_t clear)
#endif
}
static void lcd_putchar(char c, FILE *)
static int lcd_putchar(char c, FILE *)
{
lcd_write(c);
return 0;
}
void lcd_init(void)

1
Firmware/lcd.h
View File

@ -11,7 +11,6 @@
extern FILE _lcdout;
#define lcdout (&_lcdout)
extern void lcd_putchar(char c, FILE *stream);
extern void lcd_init(void);

3
Firmware/menu.cpp
View File

@ -457,7 +457,8 @@ void menu_draw_P<uint8_t*>(char chr, const char* str, int16_t val)
float factor = 1.0f + static_cast<float>(val) / 1000.0f;
if (val <= _md->minEditValue)
{
lcd_printf_P(menu_fmt_float13off, chr, str, " [off]");
// lcd_printf_P(menu_fmt_float13off, chr, str, " [off]");
menu_draw_toggle_puts_P(str, _T(MSG_OFF), true);
}
else
{

3
Firmware/stepper.cpp
View File

@ -1562,7 +1562,8 @@ void EEPROM_read_st(int pos, uint8_t* value, uint8_t size)
void st_current_init() //Initialize Digipot Motor Current
{
uint8_t SilentMode = eeprom_read_byte((uint8_t*)EEPROM_SILENT);
uint8_t SilentMode = eeprom_read_byte((uint8_t*)EEPROM_SILENT);
if (SilentMode == 0xff) SilentMode = 0; //set power to High Power (MK2.5) or Normal Power (MK3, unused)
SilentModeMenu = SilentMode;
#ifdef MOTOR_CURRENT_PWM_XY_PIN
pinMode(MOTOR_CURRENT_PWM_XY_PIN, OUTPUT);

68
Firmware/temperature.cpp
View File

@ -73,10 +73,6 @@ int current_voltage_raw_bed = 0;
int current_temperature_bed_raw = 0;
float current_temperature_bed = 0.0;
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
int redundant_temperature_raw = 0;
float redundant_temperature = 0.0;
#endif
#ifdef PIDTEMP
@ -175,13 +171,8 @@ static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP;
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
#endif
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
static void *heater_ttbl_map[2] = {(void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE };
static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
#else
static void *heater_ttbl_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( (void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE, (void *)HEATER_2_TEMPTABLE );
static uint8_t heater_ttbllen_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN );
#endif
static void *heater_ttbl_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( (void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE, (void *)HEATER_2_TEMPTABLE );
static uint8_t heater_ttbllen_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN );
static float analog2temp(int raw, uint8_t e);
static float analog2tempBed(int raw);
@ -195,11 +186,6 @@ enum TempRunawayStates
TempRunaway_ACTIVE = 2,
};
#ifdef WATCH_TEMP_PERIOD
int watch_start_temp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
#endif //WATCH_TEMP_PERIOD
#ifndef SOFT_PWM_SCALE
#define SOFT_PWM_SCALE 0
#endif
@ -728,34 +714,6 @@ void manage_heater()
{
soft_pwm[e] = 0;
}
#ifdef WATCH_TEMP_PERIOD
if(watchmillis[e] && _millis() - watchmillis[e] > WATCH_TEMP_PERIOD)
{
if(degHotend(e) < watch_start_temp[e] + WATCH_TEMP_INCREASE)
{
setTargetHotend(0, e);
LCD_MESSAGEPGM("Heating failed");
SERIAL_ECHO_START;
SERIAL_ECHOLN("Heating failed");
}else{
watchmillis[e] = 0;
}
}
#endif
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
if(fabs(current_temperature[0] - redundant_temperature) > MAX_REDUNDANT_TEMP_SENSOR_DIFF) {
disable_heater();
if(IsStopped() == false) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Extruder switched off. Temperature difference between temp sensors is too high !");
LCD_ALERTMESSAGEPGM("Err: REDUNDANT TEMP ERROR");
}
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
Stop();
#endif
}
#endif
} // End extruder for loop
#define FAN_CHECK_PERIOD 5000 //5s
@ -907,11 +865,7 @@ void manage_heater()
// Derived from RepRap FiveD extruder::getTemperature()
// For hot end temperature measurement.
static float analog2temp(int raw, uint8_t e) {
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
if(e > EXTRUDERS)
#else
if(e >= EXTRUDERS)
#endif
{
SERIAL_ERROR_START;
SERIAL_ERROR((int)e);
@ -1054,10 +1008,6 @@ static void updateTemperaturesFromRawValues()
current_temperature_bed = analog2tempBed(current_temperature_bed_raw);
#endif //DEBUG_HEATER_BED_SIM
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
redundant_temperature = analog2temp(redundant_temperature_raw, 1);
#endif
CRITICAL_SECTION_START;
temp_meas_ready = false;
CRITICAL_SECTION_END;
@ -1221,20 +1171,6 @@ void tp_init()
#endif //BED_MAXTEMP
}
void setWatch()
{
#ifdef WATCH_TEMP_PERIOD
for (int e = 0; e < EXTRUDERS; e++)
{
if(degHotend(e) < degTargetHotend(e) - (WATCH_TEMP_INCREASE * 2))
{
watch_start_temp[e] = degHotend(e);
watchmillis[e] = _millis();
}
}
#endif
}
#if (defined (TEMP_RUNAWAY_BED_HYSTERESIS) && TEMP_RUNAWAY_BED_TIMEOUT > 0) || (defined (TEMP_RUNAWAY_EXTRUDER_HYSTERESIS) && TEMP_RUNAWAY_EXTRUDER_TIMEOUT > 0)
void temp_runaway_check(int _heater_id, float _target_temperature, float _current_temperature, float _output, bool _isbed)
{

4
Firmware/temperature.h
View File

@ -74,9 +74,6 @@ extern int current_voltage_raw_pwr;
extern int current_voltage_raw_bed;
#endif
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
extern float redundant_temperature;
#endif
#if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
extern unsigned char soft_pwm_bed;
@ -220,7 +217,6 @@ FORCE_INLINE bool isCoolingBed() {
int getHeaterPower(int heater);
void disable_heater();
void setWatch();
void updatePID();

537
Firmware/ultralcd.cpp
View File

@ -1661,100 +1661,12 @@ static void lcd_move_menu_axis();
/* Menu implementation */
static void lcd_preheat_farm()
{
setTargetHotend0(FARM_PREHEAT_HOTEND_TEMP);
setTargetBed(FARM_PREHEAT_HPB_TEMP);
fanSpeed = 0;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
static void lcd_preheat_farm_nozzle()
{
setTargetHotend0(FARM_PREHEAT_HOTEND_TEMP);
setTargetBed(0);
fanSpeed = 0;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
static void lcd_preheat_pla()
{
setTargetHotend0(PLA_PREHEAT_HOTEND_TEMP);
if (!wizard_active) setTargetBed(PLA_PREHEAT_HPB_TEMP);
fanSpeed = PLA_PREHEAT_FAN_SPEED;
lcd_return_to_status();
setWatch(); // heater sanity check timer
if (wizard_active) lcd_wizard(WizState::Unload);
}
static void lcd_preheat_asa()
{
setTargetHotend0(ASA_PREHEAT_HOTEND_TEMP);
if (!wizard_active) setTargetBed(ASA_PREHEAT_HPB_TEMP);
fanSpeed = ASA_PREHEAT_FAN_SPEED;
lcd_return_to_status();
setWatch(); // heater sanity check timer
if (wizard_active) lcd_wizard(WizState::Unload);
}
static void lcd_preheat_abs()
{
setTargetHotend0(ABS_PREHEAT_HOTEND_TEMP);
if (!wizard_active) setTargetBed(ABS_PREHEAT_HPB_TEMP);
fanSpeed = ABS_PREHEAT_FAN_SPEED;
lcd_return_to_status();
setWatch(); // heater sanity check timer
if (wizard_active) lcd_wizard(WizState::Unload);
}
static void lcd_preheat_pp()
{
setTargetHotend0(PP_PREHEAT_HOTEND_TEMP);
if (!wizard_active) setTargetBed(PP_PREHEAT_HPB_TEMP);
fanSpeed = PP_PREHEAT_FAN_SPEED;
lcd_return_to_status();
setWatch(); // heater sanity check timer
if (wizard_active) lcd_wizard(WizState::Unload);
}
static void lcd_preheat_pet()
{
setTargetHotend0(PET_PREHEAT_HOTEND_TEMP);
if (!wizard_active) setTargetBed(PET_PREHEAT_HPB_TEMP);
fanSpeed = PET_PREHEAT_FAN_SPEED;
lcd_return_to_status();
setWatch(); // heater sanity check timer
if (wizard_active) lcd_wizard(WizState::Unload);
}
static void lcd_preheat_hips()
{
setTargetHotend0(HIPS_PREHEAT_HOTEND_TEMP);
if (!wizard_active) setTargetBed(HIPS_PREHEAT_HPB_TEMP);
fanSpeed = HIPS_PREHEAT_FAN_SPEED;
lcd_return_to_status();
setWatch(); // heater sanity check timer
if (wizard_active) lcd_wizard(WizState::Unload);
}
static void lcd_preheat_flex()
{
setTargetHotend0(FLEX_PREHEAT_HOTEND_TEMP);
if (!wizard_active) setTargetBed(FLEX_PREHEAT_HPB_TEMP);
fanSpeed = FLEX_PREHEAT_FAN_SPEED;
lcd_return_to_status();
setWatch(); // heater sanity check timer
if (wizard_active) lcd_wizard(WizState::Unload);
}
static void lcd_cooldown()
{
setAllTargetHotends(0);
setTargetBed(0);
fanSpeed = 0;
eFilamentAction = FilamentAction::None;
lcd_return_to_status();
}
@ -2021,27 +1933,8 @@ static void lcd_menu_test_restore()
static void lcd_preheat_menu()
{
MENU_BEGIN();
if (!wizard_active) MENU_ITEM_BACK_P(_T(MSG_MAIN));
if (farm_mode) {
MENU_ITEM_FUNCTION_P(PSTR("farm - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FARM_PREHEAT_HPB_TEMP)), lcd_preheat_farm);
MENU_ITEM_FUNCTION_P(PSTR("nozzle - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/0"), lcd_preheat_farm_nozzle);
MENU_ITEM_FUNCTION_P(_T(MSG_COOLDOWN), lcd_cooldown);
} else {
MENU_ITEM_FUNCTION_P(PSTR("PLA - " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP)), lcd_preheat_pla);
MENU_ITEM_FUNCTION_P(PSTR("PET - " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP)), lcd_preheat_pet);
MENU_ITEM_FUNCTION_P(PSTR("ASA - " STRINGIFY(ASA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ASA_PREHEAT_HPB_TEMP)), lcd_preheat_asa);
MENU_ITEM_FUNCTION_P(PSTR("ABS - " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)), lcd_preheat_abs);
MENU_ITEM_FUNCTION_P(PSTR("HIPS - " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP)), lcd_preheat_hips);
MENU_ITEM_FUNCTION_P(PSTR("PP - " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP)), lcd_preheat_pp);
MENU_ITEM_FUNCTION_P(PSTR("FLEX - " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP)), lcd_preheat_flex);
if (!wizard_active) MENU_ITEM_FUNCTION_P(_T(MSG_COOLDOWN), lcd_cooldown);
}
MENU_END();
eFilamentAction = FilamentAction::Preheat;
mFilamentMenu();
}
static void lcd_support_menu()
@ -2194,7 +2087,7 @@ FilamentAction eFilamentAction=FilamentAction::None; // must be initialized as '
bool bFilamentFirstRun;
bool bFilamentPreheatState;
bool bFilamentAction=false;
bool bFilamentWaitingFlag=false;
static bool bFilamentWaitingFlag=false;
static void mFilamentPrompt()
{
@ -2219,6 +2112,7 @@ switch(eFilamentAction)
case FilamentAction::MmuEject:
case FilamentAction::MmuCut:
case FilamentAction::None:
case FilamentAction::Preheat:
break;
}
if(lcd_clicked())
@ -2247,290 +2141,220 @@ if(lcd_clicked())
case FilamentAction::MmuEject:
case FilamentAction::MmuCut:
case FilamentAction::None:
case FilamentAction::Preheat:
break;
}
}
}
/*
void _mFilamentItem(uint16_t nTemp,uint16_t nTempBed)
void mFilamentItem(uint16_t nTemp, uint16_t nTempBed)
{
static int nTargetOld,nTargetBedOld;
uint8_t nLevel;
static bool bBeep=false;
static int nTargetOld;
static int nTargetBedOld;
uint8_t nLevel;
//if(bPreheatState) // not necessary
nTargetOld=target_temperature[0];
nTargetBedOld=target_temperature_bed;
setTargetHotend0((float)nTemp);
setTargetBed((float)nTempBed);
lcd_timeoutToStatus.stop();
lcd_set_cursor(0,0);
lcdui_print_temp(LCD_STR_THERMOMETER[0],(int)degHotend(0),(int)degTargetHotend(0));
lcd_set_cursor(0,1);
switch(eFilamentAction)
{
case eFILAMENT_ACTION::load:
case eFILAMENT_ACTION::autoLoad:
case eFILAMENT_ACTION::mmuLoad:
lcd_puts_P(_i("Preheating to load")); ////MSG_ c=20 r=1
break;
case eFILAMENT_ACTION::unLoad:
case eFILAMENT_ACTION::mmuUnLoad:
lcd_puts_P(_i("Preheating to unload")); ////MSG_ c=20 r=1
break;
case eFILAMENT_ACTION::mmuEject:
lcd_puts_P(_i("Preheating to eject")); ////MSG_ c=20 r=1
break;
case eFILAMENT_ACTION::mmuCut:
lcd_puts_P(_i("Preheating to cut")); ////MSG_ c=20 r=1
break;
}
lcd_set_cursor(0,3);
lcd_puts_P(_i(">Cancel")); ////MSG_ c=20 r=1
if(lcd_clicked())
{
if(!bFilamentPreheatState)
{
setTargetHotend0(0.0);
setTargetBed(0.0);
menu_back();
}
else {
setTargetHotend0((float)nTargetOld);
setTargetBed((float)nTargetBedOld);
}
menu_back();
if(eFilamentAction==eFILAMENT_ACTION::autoLoad)
eFilamentAction=eFILAMENT_ACTION::none; // i.e. non-autoLoad
}
else {
if(current_temperature[0]>(target_temperature[0]*0.95))
{
switch(eFilamentAction)
{
case eFILAMENT_ACTION::load:
case eFILAMENT_ACTION::autoLoad:
case eFILAMENT_ACTION::unLoad:
menu_submenu(mFilamentPrompt);
break;
case eFILAMENT_ACTION::mmuLoad:
nLevel=1;
if(!bFilamentPreheatState)
nLevel++;
bFilamentAction=true;
menu_back(nLevel);
menu_submenu(mmu_load_to_nozzle_menu);
break;
case eFILAMENT_ACTION::mmuUnLoad:
nLevel=1;
if(!bFilamentPreheatState)
nLevel++;
bFilamentAction=true;
menu_back(nLevel);
extr_unload();
break;
case eFILAMENT_ACTION::mmuEject:
nLevel=1;
if(!bFilamentPreheatState)
nLevel++;
bFilamentAction=true;
menu_back(nLevel);
menu_submenu(mmu_fil_eject_menu);
break;
case eFILAMENT_ACTION::mmuCut:
nLevel=1;
if(!bFilamentPreheatState)
nLevel++;
bFilamentAction=true;
menu_back(nLevel);
menu_submenu(mmu_cut_filament_menu);
break;
}
if(bBeep)
Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
bBeep=false;
}
else bBeep=true;
}
}
*/
nTargetOld = target_temperature[0];
nTargetBedOld = target_temperature_bed;
setTargetHotend0((float )nTemp);
if (!wizard_active) setTargetBed((float) nTempBed);
void mFilamentItem(uint16_t nTemp,uint16_t nTempBed)
{
static int nTargetOld,nTargetBedOld;
uint8_t nLevel;
if (eFilamentAction == FilamentAction::Preheat)
{
eFilamentAction = FilamentAction::None;
lcd_return_to_status();
if (wizard_active) lcd_wizard(WizState::Unload);
return;
}
//if(bPreheatState) // not necessary
nTargetOld=target_temperature[0];
nTargetBedOld=target_temperature_bed;
setTargetHotend0((float)nTemp);
setTargetBed((float)nTempBed);
lcd_timeoutToStatus.stop();
if(current_temperature[0]>(target_temperature[0]*0.95))
{
switch(eFilamentAction)
{
case FilamentAction::Load:
case FilamentAction::AutoLoad:
case FilamentAction::UnLoad:
if(bFilamentWaitingFlag)
menu_submenu(mFilamentPrompt);
else {
nLevel=bFilamentPreheatState?1:2;
menu_back(nLevel);
if((eFilamentAction==FilamentAction::Load)||(eFilamentAction==FilamentAction::AutoLoad))
{
loading_flag=true;
enquecommand_P(PSTR("M701")); // load filament
if(eFilamentAction==FilamentAction::AutoLoad)
eFilamentAction=FilamentAction::None; // i.e. non-autoLoad
}
if(eFilamentAction==FilamentAction::UnLoad)
enquecommand_P(PSTR("M702")); // unload filament
}
break;
case FilamentAction::MmuLoad:
nLevel=bFilamentPreheatState?1:2;
bFilamentAction=true;
menu_back(nLevel);
menu_submenu(mmu_load_to_nozzle_menu);
break;
case FilamentAction::MmuUnLoad:
nLevel=bFilamentPreheatState?1:2;
bFilamentAction=true;
menu_back(nLevel);
extr_unload();
break;
case FilamentAction::MmuEject:
nLevel=bFilamentPreheatState?1:2;
bFilamentAction=true;
menu_back(nLevel);
menu_submenu(mmu_fil_eject_menu);
break;
case FilamentAction::MmuCut:
lcd_timeoutToStatus.stop();
if (current_temperature[0] > (target_temperature[0] * 0.95))
{
switch (eFilamentAction)
{
case FilamentAction::Load:
case FilamentAction::AutoLoad:
case FilamentAction::UnLoad:
if (bFilamentWaitingFlag) menu_submenu(mFilamentPrompt);
else
{
nLevel = bFilamentPreheatState ? 1 : 2;
menu_back(nLevel);
if ((eFilamentAction == FilamentAction::Load) || (eFilamentAction == FilamentAction::AutoLoad))
{
loading_flag = true;
enquecommand_P(PSTR("M701")); // load filament
if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
}
if (eFilamentAction == FilamentAction::UnLoad)
enquecommand_P(PSTR("M702")); // unload filament
}
break;
case FilamentAction::MmuLoad:
nLevel = bFilamentPreheatState ? 1 : 2;
bFilamentAction = true;
menu_back(nLevel);
menu_submenu(mmu_load_to_nozzle_menu);
break;
case FilamentAction::MmuUnLoad:
nLevel = bFilamentPreheatState ? 1 : 2;
bFilamentAction = true;
menu_back(nLevel);
extr_unload();
break;
case FilamentAction::MmuEject:
nLevel = bFilamentPreheatState ? 1 : 2;
bFilamentAction = true;
menu_back(nLevel);
menu_submenu(mmu_fil_eject_menu);
break;
case FilamentAction::MmuCut:
#ifdef MMU_HAS_CUTTER
nLevel=bFilamentPreheatState?1:2;
bFilamentAction=true;
menu_back(nLevel);
menu_submenu(mmu_cut_filament_menu);
nLevel=bFilamentPreheatState?1:2;
bFilamentAction=true;
menu_back(nLevel);
menu_submenu(mmu_cut_filament_menu);
#endif //MMU_HAS_CUTTER
break;
case FilamentAction::None:
break;
}
if(bFilamentWaitingFlag)
Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
bFilamentWaitingFlag=false;
}
else {
bFilamentWaitingFlag=true;
lcd_set_cursor(0,0);
lcdui_print_temp(LCD_STR_THERMOMETER[0],(int)degHotend(0),(int)degTargetHotend(0));
lcd_set_cursor(0,1);
switch(eFilamentAction)
{
case FilamentAction::Load:
case FilamentAction::AutoLoad:
case FilamentAction::MmuLoad:
lcd_puts_P(_i("Preheating to load")); ////MSG_ c=20 r=1
break;
case FilamentAction::UnLoad:
case FilamentAction::MmuUnLoad:
lcd_puts_P(_i("Preheating to unload")); ////MSG_ c=20 r=1
break;
case FilamentAction::MmuEject:
lcd_puts_P(_i("Preheating to eject")); ////MSG_ c=20 r=1
break;
case FilamentAction::MmuCut:
lcd_puts_P(_i("Preheating to cut")); ////MSG_ c=20 r=1
break;
case FilamentAction::None:
break;
}
lcd_set_cursor(0,3);
lcd_puts_P(_i(">Cancel")); ////MSG_ c=20 r=1
if(lcd_clicked())
{
bFilamentWaitingFlag=false;
if(!bFilamentPreheatState)
{
setTargetHotend0(0.0);
setTargetBed(0.0);
menu_back();
}
else {
setTargetHotend0((float)nTargetOld);
setTargetBed((float)nTargetBedOld);
}
menu_back();
if(eFilamentAction==FilamentAction::AutoLoad)
eFilamentAction=FilamentAction::None; // i.e. non-autoLoad
}
}
break;
case FilamentAction::None:
case FilamentAction::Preheat:
break;
}
if (bFilamentWaitingFlag) Sound_MakeSound(e_SOUND_TYPE_StandardPrompt);
bFilamentWaitingFlag = false;
}
else
{
bFilamentWaitingFlag = true;
lcd_set_cursor(0, 0);
lcdui_print_temp(LCD_STR_THERMOMETER[0], (int) degHotend(0), (int) degTargetHotend(0));
lcd_set_cursor(0, 1);
switch (eFilamentAction)
{
case FilamentAction::Load:
case FilamentAction::AutoLoad:
case FilamentAction::MmuLoad:
lcd_puts_P(_i("Preheating to load")); ////MSG_ c=20 r=1
break;
case FilamentAction::UnLoad:
case FilamentAction::MmuUnLoad:
lcd_puts_P(_i("Preheating to unload")); ////MSG_ c=20 r=1
break;
case FilamentAction::MmuEject:
lcd_puts_P(_i("Preheating to eject")); ////MSG_ c=20 r=1
break;
case FilamentAction::MmuCut:
lcd_puts_P(_i("Preheating to cut")); ////MSG_ c=20 r=1
break;
case FilamentAction::None:
case FilamentAction::Preheat:
break;
}
lcd_set_cursor(0, 3);
lcd_puts_P(_i(">Cancel")); ////MSG_ c=20 r=1
if (lcd_clicked())
{
bFilamentWaitingFlag = false;
if (!bFilamentPreheatState)
{
setTargetHotend0(0.0);
setTargetBed(0.0);
menu_back();
}
else
{
setTargetHotend0((float )nTargetOld);
setTargetBed((float) nTargetBedOld);
}
menu_back();
if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
}
}
}
static void mFilamentItem_farm()
{
bFilamentPreheatState = false;
mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, FARM_PREHEAT_HPB_TEMP);
}
static void mFilamentItem_farm_nozzle()
{
bFilamentPreheatState = false;
mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, 0);
}
static void mFilamentItem_PLA()
{
bFilamentPreheatState=false;
mFilamentItem(PLA_PREHEAT_HOTEND_TEMP,PLA_PREHEAT_HPB_TEMP);
bFilamentPreheatState = false;
mFilamentItem(PLA_PREHEAT_HOTEND_TEMP, PLA_PREHEAT_HPB_TEMP);
}
static void mFilamentItem_PET()
{
bFilamentPreheatState=false;
mFilamentItem(PET_PREHEAT_HOTEND_TEMP,PET_PREHEAT_HPB_TEMP);
bFilamentPreheatState = false;
mFilamentItem(PET_PREHEAT_HOTEND_TEMP, PET_PREHEAT_HPB_TEMP);
}
static void mFilamentItem_ASA()
{
bFilamentPreheatState=false;
mFilamentItem(ASA_PREHEAT_HOTEND_TEMP,ASA_PREHEAT_HPB_TEMP);
bFilamentPreheatState = false;
mFilamentItem(ASA_PREHEAT_HOTEND_TEMP, ASA_PREHEAT_HPB_TEMP);
}
static void mFilamentItem_ABS()
{
bFilamentPreheatState=false;
mFilamentItem(ABS_PREHEAT_HOTEND_TEMP,ABS_PREHEAT_HPB_TEMP);
bFilamentPreheatState = false;
mFilamentItem(ABS_PREHEAT_HOTEND_TEMP, ABS_PREHEAT_HPB_TEMP);
}
static void mFilamentItem_HIPS()
{
bFilamentPreheatState=false;
mFilamentItem(HIPS_PREHEAT_HOTEND_TEMP,HIPS_PREHEAT_HPB_TEMP);
bFilamentPreheatState = false;
mFilamentItem(HIPS_PREHEAT_HOTEND_TEMP, HIPS_PREHEAT_HPB_TEMP);
}
static void mFilamentItem_PP()
{
bFilamentPreheatState=false;
mFilamentItem(PP_PREHEAT_HOTEND_TEMP,PP_PREHEAT_HPB_TEMP);
bFilamentPreheatState = false;
mFilamentItem(PP_PREHEAT_HOTEND_TEMP, PP_PREHEAT_HPB_TEMP);
}
static void mFilamentItem_FLEX()
{
bFilamentPreheatState=false;
mFilamentItem(FLEX_PREHEAT_HOTEND_TEMP,FLEX_PREHEAT_HPB_TEMP);
bFilamentPreheatState = false;
mFilamentItem(FLEX_PREHEAT_HOTEND_TEMP, FLEX_PREHEAT_HPB_TEMP);
}
void mFilamentBack()
{
menu_back();
if(eFilamentAction==FilamentAction::AutoLoad)
eFilamentAction=FilamentAction::None; // i.e. non-autoLoad
menu_back();
if (eFilamentAction == FilamentAction::AutoLoad ||
eFilamentAction == FilamentAction::Preheat)
{
eFilamentAction = FilamentAction::None; // i.e. non-autoLoad
}
}
void mFilamentMenu()
{
MENU_BEGIN();
MENU_ITEM_FUNCTION_P(_T(MSG_MAIN),mFilamentBack);
MENU_ITEM_SUBMENU_P(PSTR("PLA - " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP)),mFilamentItem_PLA);
MENU_ITEM_SUBMENU_P(PSTR("PET - " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP)),mFilamentItem_PET);
MENU_ITEM_SUBMENU_P(PSTR("ASA - " STRINGIFY(ASA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ASA_PREHEAT_HPB_TEMP)),mFilamentItem_ASA);
MENU_ITEM_SUBMENU_P(PSTR("ABS - " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)),mFilamentItem_ABS);
MENU_ITEM_SUBMENU_P(PSTR("HIPS - " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP)),mFilamentItem_HIPS);
MENU_ITEM_SUBMENU_P(PSTR("PP - " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP)),mFilamentItem_PP);
MENU_ITEM_SUBMENU_P(PSTR("FLEX - " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP)),mFilamentItem_FLEX);
if (!wizard_active) MENU_ITEM_FUNCTION_P(_T(MSG_MAIN),mFilamentBack);
if (farm_mode)
{
MENU_ITEM_FUNCTION_P(PSTR("farm - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FARM_PREHEAT_HPB_TEMP)), mFilamentItem_farm);
MENU_ITEM_FUNCTION_P(PSTR("nozzle - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/0"), mFilamentItem_farm_nozzle);
}
else
{
MENU_ITEM_SUBMENU_P(PSTR("PLA - " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP)),mFilamentItem_PLA);
MENU_ITEM_SUBMENU_P(PSTR("PET - " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP)),mFilamentItem_PET);
MENU_ITEM_SUBMENU_P(PSTR("ASA - " STRINGIFY(ASA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ASA_PREHEAT_HPB_TEMP)),mFilamentItem_ASA);
MENU_ITEM_SUBMENU_P(PSTR("ABS - " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)),mFilamentItem_ABS);
MENU_ITEM_SUBMENU_P(PSTR("HIPS - " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP)),mFilamentItem_HIPS);
MENU_ITEM_SUBMENU_P(PSTR("PP - " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP)),mFilamentItem_PP);
MENU_ITEM_SUBMENU_P(PSTR("FLEX - " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP)),mFilamentItem_FLEX);
}
if (!wizard_active && eFilamentAction == FilamentAction::Preheat) MENU_ITEM_FUNCTION_P(_T(MSG_COOLDOWN), lcd_cooldown);
MENU_END();
}
@ -8489,8 +8313,23 @@ uint8_t get_message_level()
void menu_lcd_longpress_func(void)
{
move_menu_scale = 1.0;
menu_submenu(lcd_move_z);
if (homing_flag || mesh_bed_leveling_flag || menu_menu == lcd_babystep_z || menu_menu == lcd_move_z)
{
// disable longpress during re-entry, while homing or calibration
lcd_quick_feedback();
return;
}
if (current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU && (moves_planned() || IS_SD_PRINTING || is_usb_printing ))
{
lcd_clear();
menu_submenu(lcd_babystep_z);
}
else
{
move_menu_scale = 1.0;
menu_submenu(lcd_move_z);
}
}
void menu_lcd_charsetup_func(void)

1
Firmware/ultralcd.h
View File

@ -167,6 +167,7 @@ enum class FilamentAction : uint_least8_t
MmuUnLoad,
MmuEject,
MmuCut,
Preheat,
};
extern FilamentAction eFilamentAction;

2
Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
View File

@ -257,7 +257,7 @@ BED SETTINGS
#define BED_ADJUSTMENT_UM_MAX 100
#define MESH_HOME_Z_CALIB 0.2
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 9 // Z probe to nozzle Y offset: -front +behind

10
Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h
View File

@ -256,7 +256,7 @@ BED SETTINGS
#define BED_ADJUSTMENT_UM_MAX 100
#define MESH_HOME_Z_CALIB 0.2
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 9 // Z probe to nozzle Y offset: -front +behind
@ -319,35 +319,27 @@ PREHEAT SETTINGS
#define FARM_PREHEAT_HOTEND_TEMP 250
#define FARM_PREHEAT_HPB_TEMP 80
#define FARM_PREHEAT_FAN_SPEED 0
#define PLA_PREHEAT_HOTEND_TEMP 215
#define PLA_PREHEAT_HPB_TEMP 55
#define PLA_PREHEAT_FAN_SPEED 0
#define ASA_PREHEAT_HOTEND_TEMP 260
#define ASA_PREHEAT_HPB_TEMP 105
#define ASA_PREHEAT_FAN_SPEED 0
#define ABS_PREHEAT_HOTEND_TEMP 255
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 0
#define HIPS_PREHEAT_HOTEND_TEMP 220
#define HIPS_PREHEAT_HPB_TEMP 100
#define HIPS_PREHEAT_FAN_SPEED 0
#define PP_PREHEAT_HOTEND_TEMP 254
#define PP_PREHEAT_HPB_TEMP 100
#define PP_PREHEAT_FAN_SPEED 0
#define PET_PREHEAT_HOTEND_TEMP 240
#define PET_PREHEAT_HPB_TEMP 90
#define PET_PREHEAT_FAN_SPEED 0
#define FLEX_PREHEAT_HOTEND_TEMP 230
#define FLEX_PREHEAT_HPB_TEMP 50
#define FLEX_PREHEAT_FAN_SPEED 0
/*------------------------------------
THERMISTORS SETTINGS

10
Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
View File

@ -314,7 +314,7 @@
#define BED_ADJUSTMENT_UM_MAX 100
#define MESH_HOME_Z_CALIB 0.2
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
@ -377,35 +377,27 @@
#define FARM_PREHEAT_HOTEND_TEMP 250
#define FARM_PREHEAT_HPB_TEMP 80
#define FARM_PREHEAT_FAN_SPEED 0
#define PLA_PREHEAT_HOTEND_TEMP 215
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 0
#define ASA_PREHEAT_HOTEND_TEMP 260
#define ASA_PREHEAT_HPB_TEMP 105
#define ASA_PREHEAT_FAN_SPEED 0
#define ABS_PREHEAT_HOTEND_TEMP 255
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 0
#define HIPS_PREHEAT_HOTEND_TEMP 220
#define HIPS_PREHEAT_HPB_TEMP 100
#define HIPS_PREHEAT_FAN_SPEED 0
#define PP_PREHEAT_HOTEND_TEMP 254
#define PP_PREHEAT_HPB_TEMP 100
#define PP_PREHEAT_FAN_SPEED 0
#define PET_PREHEAT_HOTEND_TEMP 230
#define PET_PREHEAT_HPB_TEMP 85
#define PET_PREHEAT_FAN_SPEED 0
#define FLEX_PREHEAT_HOTEND_TEMP 240
#define FLEX_PREHEAT_HPB_TEMP 50
#define FLEX_PREHEAT_FAN_SPEED 0
/*------------------------------------
THERMISTORS SETTINGS

10
Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
View File

@ -315,7 +315,7 @@
#define BED_ADJUSTMENT_UM_MAX 100
#define MESH_HOME_Z_CALIB 0.2
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
@ -378,35 +378,27 @@
#define FARM_PREHEAT_HOTEND_TEMP 250
#define FARM_PREHEAT_HPB_TEMP 80
#define FARM_PREHEAT_FAN_SPEED 0
#define PLA_PREHEAT_HOTEND_TEMP 215
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 0
#define ASA_PREHEAT_HOTEND_TEMP 260
#define ASA_PREHEAT_HPB_TEMP 105
#define ASA_PREHEAT_FAN_SPEED 0
#define ABS_PREHEAT_HOTEND_TEMP 255
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 0
#define HIPS_PREHEAT_HOTEND_TEMP 220
#define HIPS_PREHEAT_HPB_TEMP 100
#define HIPS_PREHEAT_FAN_SPEED 0
#define PP_PREHEAT_HOTEND_TEMP 254
#define PP_PREHEAT_HPB_TEMP 100
#define PP_PREHEAT_FAN_SPEED 0
#define PET_PREHEAT_HOTEND_TEMP 230
#define PET_PREHEAT_HPB_TEMP 85
#define PET_PREHEAT_FAN_SPEED 0
#define FLEX_PREHEAT_HOTEND_TEMP 240
#define FLEX_PREHEAT_HPB_TEMP 50
#define FLEX_PREHEAT_FAN_SPEED 0
/*------------------------------------
THERMISTORS SETTINGS

10
Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
View File

@ -314,7 +314,7 @@
#define BED_ADJUSTMENT_UM_MAX 100
#define MESH_HOME_Z_CALIB 0.2
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
@ -377,35 +377,27 @@
#define FARM_PREHEAT_HOTEND_TEMP 250
#define FARM_PREHEAT_HPB_TEMP 80
#define FARM_PREHEAT_FAN_SPEED 0
#define PLA_PREHEAT_HOTEND_TEMP 215
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 0
#define ASA_PREHEAT_HOTEND_TEMP 260
#define ASA_PREHEAT_HPB_TEMP 105
#define ASA_PREHEAT_FAN_SPEED 0
#define ABS_PREHEAT_HOTEND_TEMP 255
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 0
#define HIPS_PREHEAT_HOTEND_TEMP 220
#define HIPS_PREHEAT_HPB_TEMP 100
#define HIPS_PREHEAT_FAN_SPEED 0
#define PP_PREHEAT_HOTEND_TEMP 254
#define PP_PREHEAT_HPB_TEMP 100
#define PP_PREHEAT_FAN_SPEED 0
#define PET_PREHEAT_HOTEND_TEMP 230
#define PET_PREHEAT_HPB_TEMP 85
#define PET_PREHEAT_FAN_SPEED 0
#define FLEX_PREHEAT_HOTEND_TEMP 240
#define FLEX_PREHEAT_HPB_TEMP 50
#define FLEX_PREHEAT_FAN_SPEED 0
/*------------------------------------
THERMISTORS SETTINGS

10
Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
View File

@ -315,7 +315,7 @@
#define BED_ADJUSTMENT_UM_MAX 100
#define MESH_HOME_Z_CALIB 0.2
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
@ -378,35 +378,27 @@
#define FARM_PREHEAT_HOTEND_TEMP 250
#define FARM_PREHEAT_HPB_TEMP 80
#define FARM_PREHEAT_FAN_SPEED 0
#define PLA_PREHEAT_HOTEND_TEMP 215
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 0
#define ASA_PREHEAT_HOTEND_TEMP 260
#define ASA_PREHEAT_HPB_TEMP 105
#define ASA_PREHEAT_FAN_SPEED 0
#define ABS_PREHEAT_HOTEND_TEMP 255
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 0
#define HIPS_PREHEAT_HOTEND_TEMP 220
#define HIPS_PREHEAT_HPB_TEMP 100
#define HIPS_PREHEAT_FAN_SPEED 0
#define PP_PREHEAT_HOTEND_TEMP 254
#define PP_PREHEAT_HPB_TEMP 100
#define PP_PREHEAT_FAN_SPEED 0
#define PET_PREHEAT_HOTEND_TEMP 230
#define PET_PREHEAT_HPB_TEMP 85
#define PET_PREHEAT_FAN_SPEED 0
#define FLEX_PREHEAT_HOTEND_TEMP 240
#define FLEX_PREHEAT_HPB_TEMP 50
#define FLEX_PREHEAT_FAN_SPEED 0
/*------------------------------------
THERMISTORS SETTINGS

10
Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
View File

@ -422,7 +422,7 @@
#define BED_ADJUSTMENT_UM_MAX 100
#define MESH_HOME_Z_CALIB 0.2
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
@ -487,35 +487,27 @@
#define FARM_PREHEAT_HOTEND_TEMP 250
#define FARM_PREHEAT_HPB_TEMP 80
#define FARM_PREHEAT_FAN_SPEED 0
#define PLA_PREHEAT_HOTEND_TEMP 215
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 0
#define ASA_PREHEAT_HOTEND_TEMP 260
#define ASA_PREHEAT_HPB_TEMP 105
#define ASA_PREHEAT_FAN_SPEED 0
#define ABS_PREHEAT_HOTEND_TEMP 255
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 0
#define HIPS_PREHEAT_HOTEND_TEMP 220
#define HIPS_PREHEAT_HPB_TEMP 100
#define HIPS_PREHEAT_FAN_SPEED 0
#define PP_PREHEAT_HOTEND_TEMP 254
#define PP_PREHEAT_HPB_TEMP 100
#define PP_PREHEAT_FAN_SPEED 0
#define PET_PREHEAT_HOTEND_TEMP 230
#define PET_PREHEAT_HPB_TEMP 85
#define PET_PREHEAT_FAN_SPEED 0
#define FLEX_PREHEAT_HOTEND_TEMP 240
#define FLEX_PREHEAT_HPB_TEMP 50
#define FLEX_PREHEAT_FAN_SPEED 0
/*------------------------------------
THERMISTORS SETTINGS

10
Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
View File

@ -424,7 +424,7 @@
#define BED_ADJUSTMENT_UM_MAX 100
#define MESH_HOME_Z_CALIB 0.2
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define MESH_HOME_Z_SEARCH 5.0f // Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
@ -489,35 +489,27 @@
#define FARM_PREHEAT_HOTEND_TEMP 250
#define FARM_PREHEAT_HPB_TEMP 80
#define FARM_PREHEAT_FAN_SPEED 0
#define PLA_PREHEAT_HOTEND_TEMP 215
#define PLA_PREHEAT_HPB_TEMP 60
#define PLA_PREHEAT_FAN_SPEED 0
#define ASA_PREHEAT_HOTEND_TEMP 260
#define ASA_PREHEAT_HPB_TEMP 105
#define ASA_PREHEAT_FAN_SPEED 0
#define ABS_PREHEAT_HOTEND_TEMP 255
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 0
#define HIPS_PREHEAT_HOTEND_TEMP 220
#define HIPS_PREHEAT_HPB_TEMP 100
#define HIPS_PREHEAT_FAN_SPEED 0
#define PP_PREHEAT_HOTEND_TEMP 254
#define PP_PREHEAT_HPB_TEMP 100
#define PP_PREHEAT_FAN_SPEED 0
#define PET_PREHEAT_HOTEND_TEMP 230
#define PET_PREHEAT_HPB_TEMP 85
#define PET_PREHEAT_FAN_SPEED 0
#define FLEX_PREHEAT_HOTEND_TEMP 240
#define FLEX_PREHEAT_HPB_TEMP 50
#define FLEX_PREHEAT_FAN_SPEED 0
/*------------------------------------
THERMISTORS SETTINGS

2
lang/lang-export.sh
View File

@ -1,4 +1,4 @@
#!/bin/sh
#!/bin/bash
#
# lang-export.sh - multi-language support script
# for generating lang_xx.po

2
lang/lang-import.sh
View File

@ -1,4 +1,4 @@
#!/bin/sh
#!/bin/bash
#
# lang-import.sh - multi-language support script
# for importing translated xx.po

144
lang/lang_en.txt
View File

@ -906,3 +906,147 @@
#MSG_ON
"On"
#
"Back"
#
"Checks"
#
"False triggering"
#
"FINDA:"
#
"Firmware [none]"
#
"Firmware [strict]"
#
"Firmware [warn]"
#
"HW Setup"
#
"IR:"
#
"Magnets comp.[N/A]"
#
"Magnets comp.[Off]"
#
"Magnets comp. [On]"
#
"Mesh [3x3]"
#
"Mesh [7x7]"
#
"Mesh bed leveling"
#
"MK3S firmware detected on MK3 printer"
#
"MMU Mode [Normal]"
#
"MMU Mode[Stealth]"
#
"Mode change in progress ..."
#
"Model [none]"
#
"Model [strict]"
#
"Model [warn]"
#
"Nozzle d. [0.25]"
#
"Nozzle d. [0.40]"
#
"Nozzle d. [0.60]"
#
"Nozzle [none]"
#
"Nozzle [strict]"
#
"Nozzle [warn]"
#
"G-code sliced for a different level. Continue?"
#
"G-code sliced for a different level. Please re-slice the model again. Print cancelled."
#
"G-code sliced for a different printer type. Continue?"
#
"G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
#
"G-code sliced for a newer firmware. Continue?"
#
"G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
#
"PINDA:"
#
"Preheating to cut"
#
"Preheating to eject"
#
"Printer nozzle diameter differs from the G-code. Continue?"
#
"Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
#
"Rename"
#
"Select"
#
"Sensor info"
#
"Sheet"
#
"Sound [assist]"
#
"Steel sheets"
#
"Z-correct:"
#
"Z-probe nr. [1]"
#
"Z-probe nr. [3]"

210
lang/lang_en_cz.txt
View File

@ -24,7 +24,7 @@
#MSG_BABYSTEPPING_Z c=15
"Adjusting Z:"
"Dostavovani Z:"
"Doladeni Z:"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
@ -280,7 +280,7 @@
#
"Filam. runouts"
"Vypadky filamentu"
"Vypadky filam."
#MSG_FILAMENT_CLEAN c=20 r=2
"Filament extruding & with correct color?"
@ -656,7 +656,7 @@
#
"Nozzle FAN"
"Trysk. vent."
"Tryska V."
#MSG_PAUSE_PRINT
"Pause print"
@ -760,7 +760,7 @@
#MSG_WIZARD_HEATING c=20 r=3
"Preheating nozzle. Please wait."
"Predehrivam trysku. Prosim cekejte."
"Predehrev trysky. Prosim cekejte."
#
"Please upgrade."
@ -780,15 +780,15 @@
#
"Preheating to load"
"Predehrivam k zavedeni"
"Predehrev k zavedeni"
#
"Preheating to unload"
"Predehrivam k vyjmuti"
"Predehrev k vyjmuti"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Tiskovy vent.:"
"Tiskovy v:"
#MSG_CARD_MENU
"Print from SD"
@ -796,7 +796,7 @@
#
"Press the knob"
"Stisknete tlacitko"
"Stisknete hl. tlacitko"
#MSG_PRINT_PAUSED c=20 r=1
"Print paused"
@ -812,7 +812,7 @@
#
"Print FAN"
"Tiskovy vent."
"Tiskovy v"
#MSG_PRUSA3D
"prusa3d.com"
@ -1206,6 +1206,198 @@
"Off"
"Vyp"
#
"Back"
"Zpet"
#
"Checks"
"Kontrola"
#
"False triggering"
"Falesne spusteni"
#
"FINDA:"
"\x00"
#MSG_ON
"On"
"Zap"
#
"Firmware [none]"
"Firmware [Zadne]"
#
"Firmware [strict]"
"Firmware [Prisne]"
#
"Firmware [warn]"
"Firmware[Varovat]"
#
"HW Setup"
"HW nastaveni"
#
"IR:"
"\x00"
#
"Magnets comp.[N/A]"
"Komp. magnetu[N/A]"
#
"Magnets comp.[Off]"
"Komp. magnetu[Vyp]"
#
"Magnets comp. [On]"
"Komp. magnetu[Zap]"
#
"Mesh [3x3]"
"Mesh [3x3]"
#
"Mesh [7x7]"
"Mesh [7x7]"
#
"Mesh bed leveling"
"Mesh Bed Leveling"
#
"MK3S firmware detected on MK3 printer"
"MK3S firmware detekovan na tiskarne MK3"
#
"MMU Mode [Normal]"
"MMU mod [Normal]"
#
"MMU Mode[Stealth]"
"MMU Mod [Tichy]"
#
"Mode change in progress ..."
"Probiha zmena modu..."
#
"Model [none]"
"Model [Zadne]"
#
"Model [strict]"
"Model [Prisne]"
#
"Model [warn]"
"Model [Varovat]"
#
"Nozzle d. [0.25]"
"Tryska [0.25]"
#
"Nozzle d. [0.40]"
"Tryska [0.40]"
#
"Nozzle d. [0.60]"
"Tryska [0.60]"
#
"Nozzle [none]"
"Tryska [Zadne]"
#
"Nozzle [strict]"
"Tryska [Prisne]"
#
"Nozzle [warn]"
"Tryska [Varovat]"
#
"G-code sliced for a different level. Continue?"
"\x00"
#
"G-code sliced for a different level. Please re-slice the model again. Print cancelled."
"\x00"
#
"G-code sliced for a different printer type. Continue?"
"G-code je pripraven pro jiny typ tiskarny. Pokracovat?"
#
"G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
"G-code je pripraven pro jiny typ tiskarny. Prosim preslicujte model znovu. Tisk zrusen."
#
"G-code sliced for a newer firmware. Continue?"
"G-code je pripraven pro novejsi firmware. Pokracovat?"
#
"G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
"G-code je pripraven pro novejsi firmware. Prosim aktualizujte firmware. Tisk zrusen."
#
"PINDA:"
"\x00"
#
"Preheating to cut"
"Predehrev k ustrizeni"
#
"Preheating to eject"
"Predehrev k vysunuti"
#
"Printer nozzle diameter differs from the G-code. Continue?"
"Prumer trysky tiskarny se lisi od G-code. Pokracovat?"
#
"Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
"Prumer trysky tiskarny se lisi od G-code. Prosim zkontrolujte nastaveni. Tisk zrusen."
#
"Rename"
"Prejmenovat"
#
"Select"
"Vybrat"
#
"Sensor info"
"Senzor info"
#
"Sheet"
"Plat"
#
"Sound [assist]"
"Zvuk [Asist.]"
#
"Steel sheets"
"Tiskove platy"
#
"Z-correct:"
"Korekce Z:"
#
"Z-probe nr. [1]"
"Pocet mereni Z [1]"
#
"Z-probe nr. [3]"
"Pocet mereni Z [3]"

218
lang/lang_en_de.txt
View File

@ -24,11 +24,11 @@
#MSG_BABYSTEPPING_Z c=15
"Adjusting Z:"
"Z Einstellung:"
"Z Anpassen:"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
"Alles richtig "
"Alles richtig "
#MSG_WIZARD_DONE c=20 r=8
"All is done. Happy printing!"
@ -656,7 +656,7 @@
#
"Nozzle FAN"
"Duesen Luefter"
"Duesevent."
#MSG_PAUSE_PRINT
"Pause print"
@ -812,7 +812,7 @@
#
"Print FAN"
"Druckluefter"
"Druckvent"
#MSG_PRUSA3D
"prusa3d.com"
@ -852,7 +852,7 @@
#MSG_BED_CORRECTION_RIGHT c=14 r=1
"Right side[um]"
"Rechts [um]"
"Rechts [um]"
#MSG_RPI_PORT
"RPi port"
@ -892,7 +892,7 @@
#MSG_SELFTEST
"Selftest "
"Selbsttest "
"Selbsttest "
#MSG_SELFTEST_ERROR
"Selftest error !"
@ -940,7 +940,7 @@
#MSG_NONE
"None"
"Keine"
"Ohne"
#MSG_SORT_TIME
"Time"
@ -948,7 +948,7 @@
#
"Severe skew"
"Schwerer Schraeglauf"
"Schwer.Schr"
#MSG_SORT_ALPHA
"Alphabet"
@ -964,7 +964,7 @@
#
"Slight skew"
"Leichter Schraeglauf"
"Leicht.Schr"
#MSG_SOUND
"Sound"
@ -1000,7 +1000,7 @@
#MSG_STOPPED
"STOPPED. "
"GESTOPPT. "
"GESTOPPT."
#MSG_SUPPORT
"Support"
@ -1012,15 +1012,15 @@
#MSG_TEMP_CALIBRATION c=20 r=1
"Temp. cal. "
"Temp Kalib. "
"Temp Kalib. "
#MSG_TEMP_CALIBRATION_ON c=20 r=1
"Temp. cal. [on]"
"Temp. Kal. [AN]"
"Temp. Kal. [an]"
#MSG_TEMP_CALIBRATION_OFF c=20 r=1
"Temp. cal. [off]"
"Temp. Kal. [AUS]"
"Temp. Kal. [aus]"
#MSG_CALIBRATION_PINDA_MENU c=17 r=1
"Temp. calibration"
@ -1207,6 +1207,198 @@
"Off"
"Aus"
#
"Back"
"Zurueck"
#
"Checks"
"\x00"
#MSG_ON
"On"
"An"
#
"False triggering"
"Falschtriggerung"
#
"FINDA:"
"\x00"
#
"Firmware [none]"
"Firmware [ohne]"
#
"Firmware [strict]"
"Firmware [streng]"
#
"Firmware [warn]"
"\x00"
#
"HW Setup"
"HW Einstellungen"
#
"IR:"
"\x00"
#
"Magnets comp.[N/A]"
"Magnet Komp. [nv]"
#
"Magnets comp.[Off]"
"Magnet Komp. [Aus]"
#
"Magnets comp. [On]"
"Magnet Komp. [An]"
#
"Mesh [3x3]"
"\x00"
#
"Mesh [7x7]"
"\x00"
#
"Mesh bed leveling"
"Mesh Bett Ausgleich"
#
"MK3S firmware detected on MK3 printer"
"MK3S-Firmware auf MK3-Drucker erkannt"
#
"MMU Mode [Normal]"
"MMU Modus[Normal]"
#
"MMU Mode[Stealth]"
"MMU Mod.[Stealth]"
#
"Mode change in progress ..."
"Moduswechsel erfolgt..."
#
"Model [none]"
"Modell [ohne]"
#
"Model [strict]"
"Modell [streng]"
#
"Model [warn]"
"Modell [warn]"
#
"Nozzle d. [0.25]"
"Duese D. [0.25]"
#
"Nozzle d. [0.40]"
"Duese D. [0.40]"
#
"Nozzle d. [0.60]"
"Duese D. [0.60]"
#
"Nozzle [none]"
"Duese [ohne]"
#
"Nozzle [strict]"
"Duese [streng]"
#
"Nozzle [warn]"
"Duese [warn]"
#
"G-code sliced for a different level. Continue?"
"G-Code ist fuer einen anderen Level geslict. Fortfahren?"
#
"G-code sliced for a different level. Please re-slice the model again. Print cancelled."
"G-Code ist fuer einen anderen Level geslict. Bitte slicen Sie das Modell erneut. Druck abgebrochen."
#
"G-code sliced for a different printer type. Continue?"
"G-Code ist fuer einen anderen Drucker geslict. Fortfahren?"
#
"G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
"G-Code ist fuer einen anderen Drucker geslict. Bitte slicen Sie das Modell erneut. Druck abgebrochen."
#
"G-code sliced for a newer firmware. Continue?"
"G-Code ist fuer eine neuere Firmware geslict. Fortfahren?"
#
"G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
"G-Code ist fuer eine neuere Firmware geslict. Bitte die Firmware updaten. Druck abgebrochen."
#
"PINDA:"
"\x00"
#
"Preheating to cut"
"Heizen zum Schnitt"
#
"Preheating to eject"
"Heizen zum Auswurf"
#
"Printer nozzle diameter differs from the G-code. Continue?"
"Der Durchmesser der Druckerduese weicht vom G-Code ab. Fortfahren?"
#
"Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
"Der Durchmesser der Druckerduese weicht vom G-Code ab. Bitte ueberpruefen Sie den Wert in den Einstellungen. Druck abgebrochen."
#
"Rename"
"Umbenennen"
#
"Select"
"Auswahl"
#
"Sensor info"
"Sensor Info"
#
"Sheet"
"Blech"
#
"Sound [assist]"
"Sound [Assist]"
#
"Steel sheets"
"Stahlbleche"
#
"Z-correct:"
"Z-Korrektur:"
#
"Z-probe nr. [1]"
"Z-Probe Nr. [1]"
#
"Z-probe nr. [3]"
"Z-Probe Nr. [3]"

230
lang/lang_en_es.txt
View File

@ -24,7 +24,7 @@
#MSG_BABYSTEPPING_Z c=15
"Adjusting Z:"
"Ajustar Z:"
"Ajustando Z:"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
@ -96,7 +96,7 @@
#MSG_BED
"Bed"
"Base calefactable "
"Base"
#MSG_MENU_BELT_STATUS c=15 r=1
"Belt status"
@ -200,7 +200,7 @@
#MSG_EXTRUDER_CORRECTION c=10
"E-correct:"
"E-correcion:"
"Correccion-E:"
#MSG_EJECT_FILAMENT c=17 r=1
"Eject filament"
@ -240,7 +240,7 @@
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Ventilador del extrusor:"
"Vent.extrusor:"
#MSG_INFO_EXTRUDER c=15 r=1
"Extruder info"
@ -532,7 +532,7 @@
#
"Measured skew"
"Desviacion medida:"
"Desviacion med:"
#
"MMU fails"
@ -616,7 +616,7 @@
#MSG_NA
"N/A"
"N/D"
"N/A"
#MSG_NO
"No"
@ -640,7 +640,7 @@
#MSG_WIZARD_WILL_PREHEAT c=20 r=4
"Now I will preheat nozzle for PLA."
"Voy a precalentar la boquilla para PLA ahora."
"Ahora precalentare la boquilla para PLA."
#MSG_NOZZLE
"Nozzle"
@ -656,7 +656,7 @@
#
"Nozzle FAN"
"Ventilador de capa"
"Vent. capa"
#MSG_PAUSE_PRINT
"Pause print"
@ -788,7 +788,7 @@
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Ventilador del fusor:"
"Vent.fusor:"
#MSG_CARD_MENU
"Print from SD"
@ -812,7 +812,7 @@
#
"Print FAN"
"Ventilador del extrusor"
"Vent.extr"
#MSG_PRUSA3D
"prusa3d.com"
@ -848,7 +848,7 @@
#MSG_RESUMING_PRINT c=20 r=1
"Resuming print"
"Resumiendo impresion"
"Continuando impresion"
#MSG_BED_CORRECTION_RIGHT c=14 r=1
"Right side[um]"
@ -940,15 +940,15 @@
#MSG_NONE
"None"
"Nada"
"Ninguno"
#MSG_SORT_TIME
"Time"
"Fecha"
"Tiempo"
#
"Severe skew"
"Inclinacion severa"
"Incl.severa"
#MSG_SORT_ALPHA
"Alphabet"
@ -964,7 +964,7 @@
#
"Slight skew"
"Ligeramente inclinado"
"Liger.incl."
#MSG_SOUND
"Sound"
@ -1016,11 +1016,11 @@
#MSG_TEMP_CALIBRATION_ON c=20 r=1
"Temp. cal. [on]"
"Cal. temp. [ON]"
"Cal. temp. [on]"
#MSG_TEMP_CALIBRATION_OFF c=20 r=1
"Temp. cal. [off]"
"Cal. temp. [OFF]"
"Cal. temp. [off]"
#MSG_CALIBRATION_PINDA_MENU c=17 r=1
"Temp. calibration"
@ -1164,7 +1164,7 @@
#
"X-correct:"
"X-correcion:"
"Correccion-X:"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
@ -1200,12 +1200,204 @@
#
"Y-correct:"
"Y-correcion:"
"Correccion-Y:"
#MSG_OFF
"Off"
"Ina"
#
"Back"
"atras"
#
"Checks"
"Comprobaciones"
#
"False triggering"
"Falsa activacion"
#
"FINDA:"
"FINDA:"
#
"Firmware [none]"
"Firmware[ninguno]"
#
"Firmware [strict]"
"Firmware[estrict]"
#
"Firmware [warn]"
"Firmware [aviso]"
#
"HW Setup"
"Configuracion HW"
#
"IR:"
"\x00"
#MSG_ON
"On"
"Act"
#
"Magnets comp.[N/A]"
"Comp. imanes [N/A]"
#
"Magnets comp.[Off]"
"Comp. imanes [Off]"
#
"Magnets comp. [On]"
"Comp. imanes [On]"
#
"Mesh [3x3]"
"Malla [3x3]"
#
"Mesh [7x7]"
"Malla [7x7]"
#
"Mesh bed leveling"
"Nivelacion Malla Base"
#
"MK3S firmware detected on MK3 printer"
"Firmware MK3S detectado en impresora MK3"
#
"MMU Mode [Normal]"
"Modo MMU [Normal]"
#
"MMU Mode[Stealth]"
"Modo MMU[Silenci]"
#
"Mode change in progress ..."
"Cambio de modo progresando ..."
#
"Model [none]"
"Modelo [ninguno]"
#
"Model [strict]"
"Modelo [estricto]"
#
"Model [warn]"
"Modelo [aviso]"
#
"Nozzle d. [0.25]"
"Diam. nozzl[0.25]"
#
"Nozzle d. [0.40]"
"Diam. nozzl[0.40]"
#
"Nozzle d. [0.60]"
"Diam. nozzl[0.60]"
#
"Nozzle [none]"
"Nozzle [ninguno]"
#
"Nozzle [strict]"
"Nozzle [estricto]"
#
"Nozzle [warn]"
"Nozzle [aviso]"
#
"G-code sliced for a different level. Continue?"
"Codigo G laminado para un nivel diferente. ?Continuar?"
#
"G-code sliced for a different level. Please re-slice the model again. Print cancelled."
"Codigo G laminado para un nivel diferente. Por favor relamina el modelo de nuevo. Impresion cancelada."
#
"G-code sliced for a different printer type. Continue?"
"Codigo G laminado para un tipo de impresora diferente. ?Continuar?"
#
"G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
"Codigo G laminado para una impresora diferente. Por favor relamina el modelo de nuevo. Impresion cancelada."
#
"G-code sliced for a newer firmware. Continue?"
"Codigo G laminado para nuevo firmware. ?Continuar?"
#
"G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
"Codigo G laminado para nuevo firmware. Por favor actualiza el firmware. Impresion cancelada."
#
"PINDA:"
"PINDA:"
#
"Preheating to cut"
"Precalentando para laminar"
#
"Preheating to eject"
"Precalentar para expulsar"
#
"Printer nozzle diameter differs from the G-code. Continue?"
"Diametro nozzle impresora difiere de cod.G. ?Continuar?"
#
"Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
"Diametro nozzle Impresora difiere de cod.G. Comprueba los valores en ajustes. Impresion cancelada."
#
"Rename"
"Renombrar"
#
"Select"
"Seleccionar"
#
"Sensor info"
"Info sensor"
#
"Sheet"
"Lamina"
#
"Sound [assist]"
"Sonido [asistido]"
#
"Steel sheets"
"Lamina de acero"
#
"Z-correct:"
"Correccion-Z:"
#
"Z-probe nr. [1]"
"Z-sensor nr. [1]"
#
"Z-probe nr. [3]"
"Z-sensor nr. [3]"

210
lang/lang_en_fr.txt
View File

@ -24,7 +24,7 @@
#MSG_BABYSTEPPING_Z c=15
"Adjusting Z:"
"Ajust. de Z:"
"Ajuster Z :"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
@ -264,7 +264,7 @@
#MSG_FAN_SPEED c=14
"Fan speed"
"Vitesse ventil"
"Vitesse vent."
#MSG_SELFTEST_FAN c=20
"Fan test"
@ -656,7 +656,7 @@
#
"Nozzle FAN"
"Ventilateur buse"
"Vent. buse"
#MSG_PAUSE_PRINT
"Pause print"
@ -772,7 +772,7 @@
#
"Power failures"
"Coupures de courant"
"Coup.de courant"
#MSG_PRINT_ABORTED c=20
"Print aborted"
@ -788,7 +788,7 @@
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Ventilo impr. :"
"Vent.impr:"
#MSG_CARD_MENU
"Print from SD"
@ -812,7 +812,7 @@
#
"Print FAN"
"Ventilo impression"
"Vent.impr"
#MSG_PRUSA3D
"prusa3d.com"
@ -836,7 +836,7 @@
#MSG_CALIBRATE_BED_RESET
"Reset XYZ calibr."
"Reinit. calibr. XYZ"
"Reinit.calibr. XYZ"
#MSG_BED_CORRECTION_RESET
"Reset"
@ -948,7 +948,7 @@
#
"Severe skew"
"Deviation severe"
"Deviat.sev."
#MSG_SORT_ALPHA
"Alphabet"
@ -964,7 +964,7 @@
#
"Slight skew"
"Deviation legere"
"Deviat.leg."
#MSG_SOUND
"Sound"
@ -1206,6 +1206,198 @@
"Off"
"\x00"
#
"Back"
"Retour"
#
"Checks"
"Verifications"
#
"False triggering"
"Faux declenchement"
#
"FINDA:"
"FINDA:"
#
"Firmware [none]"
"Firmware [aucune]"
#
"Firmware [strict]"
"Firmware[stricte]"
#
"Firmware [warn]"
"Firmware [avert]"
#
"HW Setup"
"Config HW"
#
"IR:"
"IR:"
#
"Magnets comp.[N/A]"
"Comp. aimants[N/A]"
#
"Magnets comp.[Off]"
"Comp. aimants[Off]"
#
"Magnets comp. [On]"
"Comp. aimants [On]"
#
"Mesh [3x3]"
"\x00"
#MSG_ON
"On"
"\x00"
#
"Mesh [7x7]"
"\x00"
#
"Mesh bed leveling"
"\x00"
#
"MK3S firmware detected on MK3 printer"
"Firmware MK3S detecte sur imprimante MK3"
#
"MMU Mode [Normal]"
"Mode MMU [Normal]"
#
"MMU Mode[Stealth]"
"Mode MMU [Furtif]"
#
"Mode change in progress ..."
"Changement de mode en cours..."
#
"Model [none]"
"Modele [aucune]"
#
"Model [strict]"
"Modele [stricte]"
#
"Model [warn]"
"Modele [avert]"
#
"Nozzle d. [0.25]"
"Diam. buse [0.25]"
#
"Nozzle d. [0.40]"
"Diam. buse [0.40]"
#
"Nozzle d. [0.60]"
"Diam. buse [0.60]"
#
"Nozzle [none]"
"Buse [aucune]"
#
"Nozzle [strict]"
"Buse [stricte]"
#
"Nozzle [warn]"
"Buse [avert]"
#
"G-code sliced for a different level. Continue?"
"\x00"
#
"G-code sliced for a different level. Please re-slice the model again. Print cancelled."
"\x00"
#
"G-code sliced for a different printer type. Continue?"
"Le G-code a ete prepare pour une autre version de l'imprimante. Continuer?"
#
"G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
"Le G-code a ete prepare pour une autre version de l'imprimante. Veuillez decouper le modele a nouveau. L'impression a ete annulee. "
#
"G-code sliced for a newer firmware. Continue?"
"Le G-code a ete prepare pour une version plus recente du firmware. Continuer?"
#
"G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
"Le G-code a ete prepare pour une version plus recente du firmware. Veuillez mettre a jour le firmware. L'impression annulee."
#
"PINDA:"
"PINDA:"
#
"Preheating to cut"
"Prechauffage pour couper"
#
"Preheating to eject"
"Prechauffage pour ejecter"
#
"Printer nozzle diameter differs from the G-code. Continue?"
"Diametre de la buse de l'imprimante different du G-Code. Continuer ?"
#
"Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
"Diametre de la buse de l'imprimante different du G-Code. Merci de verifier le parametre dans les reglages. Impression annulee."
#
"Rename"
"Renommer"
#
"Select"
"Selectionner"
#
"Sensor info"
"Info capteur"
#
"Sheet"
"Feuille"
#
"Sound [assist]"
"Son [Assist]"
#
"Steel sheets"
"Plaques en acier"
#
"Z-correct:"
"Correct-Z:"
#
"Z-probe nr. [1]"
"Sonde-Z num. [1]"
#
"Z-probe nr. [3]"
"Sonde-Z num. [3]"

236
lang/lang_en_it.txt
View File

@ -15,7 +15,7 @@
"Rilev. impatto\x0aattivabile solo\x0ain Modalita normale"
#MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
"WARNING:\x0aCrash detection disabled in Stealth mode"
"WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode"
"ATTENZIONE:\x0aRilev. impatto\x0adisattivato in\x0aModalita silenziosa"
#
@ -240,7 +240,7 @@
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Ventola estrusore:"
"Ventola estr:"
#MSG_INFO_EXTRUDER c=15 r=1
"Extruder info"
@ -252,7 +252,7 @@
#
"Fail stats MMU"
"Statistiche fallimenti MMU"
"Stat.fall. MMU"
#MSG_FSENSOR_AUTOLOAD
"F. autoload"
@ -260,11 +260,11 @@
#
"Fail stats"
"Statistiche fallimenti"
"Stat. fallimenti"
#MSG_FAN_SPEED c=14
"Fan speed"
"Velocita ventola"
"Velocita vent."
#MSG_SELFTEST_FAN c=20
"Fan test"
@ -476,7 +476,7 @@
#MSG_BED_CORRECTION_LEFT c=14 r=1
"Left side [um]"
"Lato sinistro [um]"
"Sinistra [um]"
#
"Lin. correction"
@ -532,7 +532,7 @@
#
"Measured skew"
"Disassamento misurato"
"Deviazione mis"
#
"MMU fails"
@ -568,7 +568,7 @@
#
"MMU power fails"
"Mancanza corrente MMU"
"Manc. corr. MMU"
#MSG_STEALTH
"Stealth"
@ -596,15 +596,15 @@
#MSG_MOVE_X
"Move X"
"Muovi X"
"Sposta X"
#MSG_MOVE_Y
"Move Y"
"Muovi Y"
"Sposta Y"
#MSG_MOVE_Z
"Move Z"
"Muovi Z"
"Sposta Z"
#MSG_NO_MOVE
"No move."
@ -648,7 +648,7 @@
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set."
"Sono state trovate impostazioni vecchie. I valori di default di PID, Esteps etc. saranno impostati"
"Sono state trovate impostazioni vecchie. Verranno impostati i valori predefiniti di PID, Esteps etc."
#
"Now remove the test print from steel sheet."
@ -788,7 +788,7 @@
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Ventola di stampa:"
"Vent.stam:"
#MSG_CARD_MENU
"Print from SD"
@ -940,19 +940,19 @@
#MSG_NONE
"None"
"\x00"
"Nessuno"
#MSG_SORT_TIME
"Time"
"\x00"
"Tempo"
#
"Severe skew"
"Disassamento grave"
"Devia.grave"
#MSG_SORT_ALPHA
"Alphabet"
"Alfabet"
"Alfabeti"
#MSG_SORTING c=20 r=1
"Sorting files"
@ -964,7 +964,7 @@
#
"Slight skew"
"Disassamento lieve"
"Devia.lieve"
#MSG_SOUND
"Sound"
@ -1016,11 +1016,11 @@
#MSG_TEMP_CALIBRATION_ON c=20 r=1
"Temp. cal. [on]"
"Calib. temp. [ON]"
"Calib. temp. [on]"
#MSG_TEMP_CALIBRATION_OFF c=20 r=1
"Temp. cal. [off]"
"Calib. temp.[OFF]"
"Calib. temp.[off]"
#MSG_CALIBRATION_PINDA_MENU c=17 r=1
"Temp. calibration"
@ -1052,7 +1052,7 @@
#
"Total print time"
"Tempo di stampa totale"
"Tempo stampa totale"
#MSG_TUNE
"Tune"
@ -1076,7 +1076,7 @@
#MSG_UNLOAD_FILAMENT c=17
"Unload filament"
"Scarica filam."
"Scarica filamento"
#MSG_UNLOADING_FILAMENT c=20 r=1
"Unloading filament"
@ -1209,3 +1209,195 @@
#MSG_ON
"On"
"\x00"
#
"Back"
"Indietro"
#
"Checks"
"Controlli"
#
"False triggering"
"Falso innesco"
#
"FINDA:"
"\x00"
#
"Firmware [none]"
"Firmware[nessuno]"
#
"Firmware [strict]"
"Firmware [esatto]"
#
"Firmware [warn]"
"Firmware [avviso]"
#
"HW Setup"
"Installazione HW"
#
"IR:"
"\x00"
#
"Magnets comp.[N/A]"
"Comp. Magneti[N/A]"
#
"Magnets comp.[Off]"
"Comp. Magneti[off]"
#
"Magnets comp. [On]"
"Comp. Magneti [on]"
#
"Mesh [3x3]"
"Griglia [3x3]"
#
"Mesh [7x7]"
"Griglia [7x7]"
#
"Mesh bed leveling"
"Mesh livel. letto"
#
"MK3S firmware detected on MK3 printer"
"Firmware MK3S rilevato su stampante MK3"
#
"MMU Mode [Normal]"
"Modalita MMU [Normale]"
#
"MMU Mode[Stealth]"
"Modalita MMU [Silenziosa]"
#
"Mode change in progress ..."
"Cambio modalita in corso ..."
#
"Model [none]"
"Modello [nessuno]"
#
"Model [strict]"
"Modello [esatto]"
#
"Model [warn]"
"Modello [avviso]"
#
"Nozzle d. [0.25]"
"Diam.Ugello[0.25]"
#
"Nozzle d. [0.40]"
"Diam.Ugello[0.40]"
#
"Nozzle d. [0.60]"
"Diam.Ugello[0.60]"
#
"Nozzle [none]"
"Ugello [nessuno]"
#
"Nozzle [strict]"
"Ugello [esatto]"
#
"Nozzle [warn]"
"Ugello [avviso]"
#
"G-code sliced for a different level. Continue?"
"G-code processato per un livello diverso. Continuare?"
#
"G-code sliced for a different level. Please re-slice the model again. Print cancelled."
"G-code processato per un livello diverso. Per favore esegui nuovamente lo slice del modello. Stampa annullata."
#
"G-code sliced for a different printer type. Continue?"
"G-code processato per una stampante diversa. Continuare?"
#
"G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
"G-code processato per una stampante diversa. Per favore esegui nuovamente lo slice del modello. Stampa annullata."
#
"G-code sliced for a newer firmware. Continue?"
"G-code processato per un firmware piu recente. Continuare?"
#
"G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
"G-code processato per un firmware piu recente. Per favore aggiorna il firmware. Stampa annullata."
#
"PINDA:"
"\x00"
#
"Preheating to cut"
"Preriscaldamento per taglio"
#
"Preheating to eject"
"Preriscaldamento per espulsione"
#
"Printer nozzle diameter differs from the G-code. Continue?"
"Diametro ugello diverso da G-Code. Continuare?"
#
"Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
"Diametro ugello diverso dal G-Code. Controlla il valore nelle impostazioni. Stampa annullata."
#
"Rename"
"Rinomina"
#
"Select"
"Seleziona"
#
"Sensor info"
"Info Sensore"
#
"Sheet"
"Piano"
#
"Sound [assist]"
"Suono [assistito]"
#
"Steel sheets"
"Piani d'acciaio"
#
"Z-correct:"
"Correzione-Z:"
#
"Z-probe nr. [1]"
"Z-probe nr. [1]"
#
"Z-probe nr. [3]"
"Z-probe nr. [3]"

220
lang/lang_en_pl.txt
View File

@ -8,7 +8,7 @@
#MSG_MEASURED_OFFSET
"[0;0] point offset"
"[0;0] przesuniecie punktu"
"[0;0] przesun.punktu"
#MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
"Crash detection can\x0abe turned on only in\x0aNormal mode"
@ -24,7 +24,7 @@
#MSG_BABYSTEPPING_Z c=15
"Adjusting Z:"
"Dostrajanie Z:"
"Ustawianie Z:"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
@ -44,7 +44,7 @@
#MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
"Are left and right Z~carriages all up?"
"Obydwa konce osi dojechaly do gornych ogranicznikow?"
"Obydwa konce osi sa na szczycie?"
#MSG_AUTO_DEPLETE c=17 r=1
"SpoolJoin"
@ -200,7 +200,7 @@
#MSG_EXTRUDER_CORRECTION c=10
"E-correct:"
"Korekcja E:"
"Korekcja-E:"
#MSG_EJECT_FILAMENT c=17 r=1
"Eject filament"
@ -240,7 +240,7 @@
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Went. ekstrudera:"
"Went. ekstr:"
#MSG_INFO_EXTRUDER c=15 r=1
"Extruder info"
@ -656,7 +656,7 @@
#
"Nozzle FAN"
"Went. hotendu"
"Went. Hotend"
#MSG_PAUSE_PRINT
"Pause print"
@ -788,7 +788,7 @@
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Went. wydruku:"
"Went.wydr:"
#MSG_CARD_MENU
"Print from SD"
@ -812,7 +812,7 @@
#
"Print FAN"
"Went. wydruku"
"Went.wydr"
#MSG_PRUSA3D
"prusa3d.com"
@ -936,7 +936,7 @@
#MSG_SORT
"Sort"
"Sortuj"
"Sortowanie"
#MSG_NONE
"None"
@ -948,7 +948,7 @@
#
"Severe skew"
"Znaczny skos"
"ZnacznySkos"
#MSG_SORT_ALPHA
"Alphabet"
@ -996,7 +996,7 @@
#MSG_STOP_PRINT
"Stop print"
"Zatrzymac druk"
"Przerwanie druku"
#MSG_STOPPED
"STOPPED. "
@ -1016,7 +1016,7 @@
#MSG_TEMP_CALIBRATION_ON c=20 r=1
"Temp. cal. [on]"
"Kalibr. temp.[wl]"
"Kalibr.temp. [wl]"
#MSG_TEMP_CALIBRATION_OFF c=20 r=1
"Temp. cal. [off]"
@ -1164,7 +1164,7 @@
#
"X-correct:"
"Korekcja X:"
"Korekcja-X:"
#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
@ -1200,12 +1200,204 @@
#
"Y-correct:"
"Korekcja Y:"
"Korekcja-Y:"
#MSG_OFF
"Off"
"Wyl"
#
"Back"
"Wstecz"
#
"Checks"
"Testy"
#
"False triggering"
"Falszywy alarm"
#
"FINDA:"
"\x00"
#MSG_ON
"On"
"Wl"
#
"Firmware [none]"
"Firmware [brak]"
#
"Firmware [strict]"
"Firmware [restr.]"
#
"Firmware [warn]"
"Firmware[ostrzez]"
#
"HW Setup"
"Ustawienia HW"
#
"IR:"
"\x00"
#
"Magnets comp.[N/A]"
"Kor. magnesow [nd]"
#
"Magnets comp.[Off]"
"Kor. magnesow[wyl]"
#
"Magnets comp. [On]"
"Kor. magnesow [wl]"
#
"Mesh [3x3]"
"Siatka [3x3]"
#
"Mesh [7x7]"
"Siatka [7x7]"
#
"Mesh bed leveling"
"Poziomowanie wg siatki"
#
"MK3S firmware detected on MK3 printer"
"Wykryto firmware MK3S w drukarce MK3"
#
"MMU Mode [Normal]"
"Tryb MMU[Normaln]"
#
"MMU Mode[Stealth]"
"Tryb MMU[Stealth]"
#
"Mode change in progress ..."
"Trwa zmiana trybu..."
#
"Model [none]"
"Model [brak]"
#
"Model [strict]"
"Model [restrykc.]"
#
"Model [warn]"
"Model [ostrzez.]"
#
"Nozzle d. [0.25]"
"Sr. dyszy [0,25]"
#
"Nozzle d. [0.40]"
"Sr. dyszy [0,40]"
#
"Nozzle d. [0.60]"
"Sr. dyszy [0,60]"
#
"Nozzle [none]"
"Dysza [brak]"
#
"Nozzle [strict]"
"Dysza [restrykc.]"
#
"Nozzle [warn]"
"Dysza [ostrzez.]"
#
"G-code sliced for a different level. Continue?"
"\x00"
#
"G-code sliced for a different level. Please re-slice the model again. Print cancelled."
"G-code pociety na innym poziomie. Potnij model ponownie. Druk anulowany."
#
"G-code sliced for a different printer type. Continue?"
"G-code pociety dla innej drukarki. Kontynuowac?"
#
"G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
"G-code pociety dla drukarki innego typu. Potnij model ponownie. Druk anulowany."
#
"G-code sliced for a newer firmware. Continue?"
"G-code pociety dla nowszego firmware. Kontynuowac?"
#
"G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
"G-code pociety dla nowszego firmware. Zaktualizuj firmware. Druk anulowany."
#
"PINDA:"
"\x00"
#
"Preheating to cut"
"Nagrzewanie do obciecia"
#
"Preheating to eject"
"Nagrzewanie do wysuniecia"
#
"Printer nozzle diameter differs from the G-code. Continue?"
"Srednica dyszy drukarki rozni sie od tej w G-code. Kontynuowac?"
#
"Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
"Srednica dyszy rozni sie od tej w G-code. Sprawdz ustawienia. Druk anulowany."
#
"Rename"
"Zmien nazwe"
#
"Select"
"Wybierz"
#
"Sensor info"
"Info o sensorach"
#
"Sheet"
"Plyta"
#
"Sound [assist]"
"Dzwiek [asyst.]"
#
"Steel sheets"
"Plyty stalowe"
#
"Z-correct:"
"Korekcja-Z:"
#
"Z-probe nr. [1]"
"Pomiar-Z [1]"
#
"Z-probe nr. [3]"
"Pomiar-Z [3]"

978
lang/po/Firmware.pot
View File

File diff suppressed because it is too large Load Diff

1054
lang/po/Firmware_cs.po
View File

File diff suppressed because it is too large Load Diff

1065
lang/po/Firmware_de.po
View File

File diff suppressed because it is too large Load Diff

1058
lang/po/Firmware_es.po
View File

File diff suppressed because it is too large Load Diff

1168
lang/po/Firmware_fr.po
View File

File diff suppressed because it is too large Load Diff

1058
lang/po/Firmware_it.po
View File

File diff suppressed because it is too large Load Diff

1056
lang/po/Firmware_pl.po
View File

File diff suppressed because it is too large Load Diff

851
lang/po/new/cs.po
View File

File diff suppressed because it is too large Load Diff

862
lang/po/new/de.po
View File

File diff suppressed because it is too large Load Diff

892
lang/po/new/es.po
View File

File diff suppressed because it is too large Load Diff

850
lang/po/new/fr.po
View File

File diff suppressed because it is too large Load Diff

880
lang/po/new/it.po
View File

File diff suppressed because it is too large Load Diff

864
lang/po/new/pl.po
View File

File diff suppressed because it is too large Load Diff