3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Protect pid_tuning_finished behind temperature.cpp

Browse Source 
Setting pid_tuning_finished can result in the heaters stuck to full
power. As a result, we need to ensure that when PID management is
disabled, heaters are also.
This commit is contained in:
Yuri D'Elia 2022-06-03 12:55:30 +02:00
parent 442b2e16de
commit f1d88ebd40
3 changed files with 18 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
Firmware/temperature.cpp
View File

@ -85,7 +85,17 @@ float current_temperature_bed = 0.0;
#ifdef PIDTEMP
float _Kp, _Ki, _Kd;
int pid_cycle, pid_number_of_cycles;
bool pid_tuning_finished = true;
static bool pid_tuning_finished = true;
bool pidTuningRunning() {
return !pid_tuning_finished;
}
void preparePidTuning() {
// ensure heaters are disabled before we switch off PID management!
disable_heater();
pid_tuning_finished = false;
}
#endif //PIDTEMP
unsigned char soft_pwm_bed;
@ -207,8 +217,9 @@ bool checkAllHotends(void)
// codegen bug causing a stack overwrite issue in process_commands()
void __attribute__((noinline)) PID_autotune(float temp, int extruder, int ncycles)
{
preparePidTuning();
pid_number_of_cycles = ncycles;
pid_tuning_finished = false;
float input = 0.0;
pid_cycle=0;
bool heating = true;
@ -242,8 +253,6 @@ void __attribute__((noinline)) PID_autotune(float temp, int extruder, int ncycle
}
SERIAL_ECHOLNPGM("PID Autotune start");
disable_heater(); // switch off all heaters.
if (extruder<0)
{

4
Firmware/temperature.h
View File

@ -84,11 +84,13 @@ extern bool bedPWMDisabled;
#ifdef PIDTEMP
extern int pid_cycle, pid_number_of_cycles;
extern float _Kp,_Ki,_Kd;
extern bool pid_tuning_finished;
float scalePID_i(float i);
float scalePID_d(float d);
float unscalePID_i(float i);
float unscalePID_d(float d);
bool pidTuningRunning(); // returns true if PID tuning is still running
void preparePidTuning(); // non-blocking call to set "pidTuningRunning" to true immediately
#endif

4
Firmware/ultralcd.cpp
View File

@ -1018,14 +1018,14 @@ void lcd_commands()
lcd_commands_step = 3;
}
if (lcd_commands_step == 3 && !blocks_queued()) { //PID calibration
pid_tuning_finished = false; // ensure we don't move to the next step early
preparePidTuning(); // ensure we don't move to the next step early
sprintf_P(cmd1, PSTR("M303 E0 S%3u"), pid_temp);
// setting the correct target temperature (for visualization) is done in PID_autotune
enquecommand(cmd1);
lcd_setstatuspgm(_i("PID cal."));////MSG_PID_RUNNING c=20
lcd_commands_step = 2;
}
if (lcd_commands_step == 2 && pid_tuning_finished) { //saving to eeprom
if (lcd_commands_step == 2 && !pidTuningRunning()) { //saving to eeprom
custom_message_state = 0;
lcd_setstatuspgm(_i("PID cal. finished"));////MSG_PID_FINISHED c=20
setAllTargetHotends(0); // reset all hotends temperature including the number displayed on the main screen