3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6,180 Commits 3 Branches 78 Tags 40 MiB
149ecb857c
Commit Graph

66 Commits

Author SHA1 Message Date
Yuri D'Elia
fbfacd76a4 wizard: Resume the wizard for missing calibrations during upgrades 
Instead of checking for explicit versions, resume the wizard if some
(new) wizard is missing.

This handles both the old SELFTEST check, the new thermal model
and any future check in the same fashion.
 2023-01-02 10:51:47 +01:00
Yuri D'Elia
05f37edad5 Read version data from progmem in eeprom_fw_version_older_than 2023-01-02 10:51:47 +01:00
Yuri D'Elia
612e9d9303 Replace calibration state with a new calibration bitmap 
- Move calibration status/declarations to util.h
- Allows to query the status of each step independently without assuming
  any order
- Allows to extend the calibration with new steps transparently
 2023-01-02 10:51:47 +01:00
Yuri D'Elia
670bca47da Simplify FW eeprom version checks 
- Generalize force_selftest_if_fw_version() so we can check when upgrading
  between arbitrary FW versions.
- Do not call update_current_firmware_version_to_eeprom() prematurely
  when forcing self-test (if a reset happens before self-test completes,
  the check would be incorrectly skipped on the next run).
 2023-01-02 10:51:47 +01:00
Yuri D'Elia
a6eff8f8a5 Simplify firmware/gcode version comparisons 
Fix cherry-pick issue
 2022-12-12 12:43:13 +01:00
3d-gussner
49506b5348 Fix M862.4 with [strict] mode 
Max 8 falvor versions

Fix cherry-pick issues
 2022-12-06 13:31:44 +01:00
D.R.racer
a03183723c Fix & optimize FW version parsing and checking 
PFW-1433
 2022-11-23 13:58:55 +01:00
Alex Voinea
7d597eb8b0 Move farm mode to separate file 2022-08-30 13:57:43 +02:00
Yuri D'Elia
ee12cbd58e Do not prompt on M115 if FW version check has been disabled 
As done for M862.4, do now show an upgrade prompt if FW version check as
been disabled in the Settings -> HW Setup -> Checks menu.
 2022-08-20 16:55:32 +02:00
Yuri D'Elia
4f22de2333 Do *not* shorten the current command in printer_smodel_check 
printer_smodel_check was incorrectly substituting the final " with a
null in the command to simplify the model string comparison, but in
doing so was also corrupting the next pop from the cmdqueue.

We can modify the current strchr_pointer as long as we *don't* change
it's length. This can cause an incorrect extra read from the queue,
resulting in the last command to be completely ignored.
 2022-08-06 23:15:46 +02:00
Guðni Már Gilbert
65d500f2ed Simplify printer_smodel_check 
Saves 140 bytes of flash and 4 bytes of SRAM
 2022-05-22 17:57:47 +00:00
Yuri D'Elia
1279a6cf4b Correctly read FW_VERSION_NR array from progmem 
In PR #3093 the progmem array FW_VERSION_NR was introduced to store the
version components, however the code didn't read it properly using the
pgm_read_* functions, making version comparisons fail.

Fix the existing/unused is_provided_version_newer() and reuse it in
show_upgrade_dialog_if_version_newer().

Similarly also read/update correctly the version in the eeprom.
 2021-06-28 06:36:26 +02:00
D.R.racer
88074ac6c8 Remove FW version parsing 
as it can be done at compile time. Code size dropped by >800 bytes.
 2021-06-22 08:49:52 +02:00
Yuri D'Elia
449510392d Untangle a bit some recursive include mess 2021-06-12 15:09:03 +02:00
3d-gussner
15919a0f09 Define #MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5, #MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9 2021-03-31 07:41:21 +02:00
3d-gussner
d601355d40 Define #MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5, #MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8 2021-03-30 19:01:24 +02:00
3d-gussner
669ab0f7f7 Define #MSG_GCODE_DIFF_CONTINUE c=20 r=4, #MSG_GCODE_DIFF_CANCELLED c=20 r=7 2021-03-30 18:58:04 +02:00
3d-gussner
9e60953d44 Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled." 
as French translation is longer
 2021-03-19 18:14:03 +01:00
3d-gussner
a09f2c2f2d Update "G-code sliced for a newer firmware. Continue?" 
as French translation is longer
 2021-03-19 18:12:16 +01:00
3d-gussner
03a13ace5a Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c=20 r=9 
as French translation is longer
 2021-03-19 17:47:35 +01:00
3d-gussner
17c015f5c0 Update "Printer nozzle diameter differs from the G-code. Continue?" c=20 r=5 2021-03-19 17:44:07 +01:00
3d-gussner
891861d475 Update "G-code sliced for a different level. Continue?" c= r= values 2021-03-19 16:35:53 +01:00
3d-gussner
5cbb5b0e17 Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c= r= values 2021-03-19 15:53:36 +01:00
3d-gussner
c39b22724d Update "G-code sliced for a different level. Please re-slice the model again. Print cancelled." c= r= values 2021-03-19 15:51:10 +01:00
3d-gussner
89900a5109 Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled." c= r= values 2021-03-19 15:07:14 +01:00
3d-gussner
49e8f84916 Update "G-code sliced for a newer firmware. Continue?" c= r= values 2021-03-19 15:02:53 +01:00
Alex Voinea
2f4119a6d7 M552 - Printer IP address 2021-02-02 13:21:16 +02:00
3d-gussner
c555907a12 Remove duplicate string G-code sliced for a different printer type. Please re-slice the model again. Print cancelled. using MSG_GCODE_DIFF_PRINTER_CANCELLED 2021-01-26 11:01:50 +01:00
3d-gussner
51d1e0bd8a Remove duplicate string G-code sliced for a different printer type. Continue? using MSG_GCODE_DIFF_PRINTER_CONTINUE 2021-01-26 10:42:56 +01:00
MRprusa3d
89de5aac77 default nozzle diameter for farm mode 2019-09-23 17:13:33 +02:00
MRprusa3d
b471bb7540 farm mode update, documentation correction 2019-08-05 17:51:26 +02:00
DRracer
9214e30f74
Merge pull request #2062 from MRprusa3d/PFW-873 
UI update
 2019-08-01 07:20:09 +02:00
MRprusa3d
2cb977e4a0 UI update 2019-07-31 20:39:57 +02:00
Keith Spitz
952a24b45d
Update util.cpp 
Correct "is_whitespace_or_nl": change 'r' to '\r'.
 2019-07-28 19:40:18 -06:00
NotaRobotexe
2bae208133
Merge pull request #2011 from MRprusa3d/PFW-873 
GUI updates
 2019-07-17 14:49:07 +02:00
MRprusa3d
034cbff10a GUI updates 2019-07-16 20:10:49 +02:00
Marek Bel
cee875fc6a Fix compiler warnings: 
warning: enumeration value '_None' not handled in switch [-Wswitch]
warning: enumeration value '_Undef' not handled in switch [-Wswitch]
 2019-07-16 17:40:28 +02:00
Marek Běl
d3dd0ad271
Merge pull request #1952 from NotaRobotexe/sound 
new sound
 2019-07-10 18:06:32 +02:00
MRprusa3d
98bae7af9f
Merge branch 'MK3' into PFW-873 2019-07-10 16:50:14 +02:00
MRprusa3d
3333d937ed some improvements 2019-07-10 16:29:40 +02:00
MRprusa3d
8229a45187 pre-production version ;-) 2019-07-09 12:16:51 +02:00
MRprusa3d
a3a7f3106e print parameters checking 2019-07-03 17:21:11 +02:00
Marek Bel
24cec4091b Merge branch 'MK3' into sound 2019-06-17 17:28:19 +02:00
Marek Běl
aff020a6d4
Merge pull request #1897 from NotaRobotexe/farm_mode 
PFW-571 send PRN:4 instead PRN:1, PFW-874 new firmware version alert with 30s timeout
 2019-06-14 20:05:30 +02:00
MRprusa3d
b7d3766ae2
Merge branch 'MK3' into PFW-790 2019-06-12 17:32:13 +02:00
NotaRobotexe
bb980e2fca sound edit, delete mute mode, add blind mode 2019-06-10 15:03:52 +02:00
NotaRobotexe
0cab2284ea PFW-874 new firmware alert timeout 2019-06-05 15:48:10 +02:00
Marek Běl
bbd1b60229
Merge pull request #1437 from craiglink/memory-overrun 
set array size correctly to 4
 2019-05-11 03:01:52 +02:00
Ondrej Tuma
b7fe43bf68 Deleted bad cols/rows definitions for translation. 2019-05-07 12:52:23 +02:00
MRprusa3d
1f131f66e0 print parameters checking 
nozzle diameter
 2019-03-14 00:36:56 +01:00