Yuri D'Elia
eb2ca78167
Rewrite uvlo handling for accurate Z re/positioning
...
- In both uvlo_ and uvlo_tiny, calculate Z usteps properly and adjust
the Z position to a true fullstep before disabling the motor. This
avoids shifs during recovery.
- In uvlo_tiny, instead of moving up indefinitely, adjust Z just
once using the smallest move possible (new def UVLO_TINY_Z_AXIS_SHIFT)
- Perform all the uvlo/recovery processing in physical coordinates
and MBL off: there should be no automatic Z movement!
- Disable heaters in both handlers to conserve more power.
- Add timing information to uvlo_tiny too.
- During recovery, to switch between physical and logical positioning
introduce a new "PRUSA MBL" gcode as most of the procedure is
enqueued, and no existing gcode was available.
2020-01-26 17:46:50 +01:00
Alex Voinea
e6ba9e633c
Adjusted hotend, bed and Ambient mintemp values
2020-01-21 14:50:53 +02:00
DRracer
4c74866864
Merge pull request #1933 from prusa3d/enable_cutter
...
Enable MMU cutter.
2020-01-09 13:47:44 +01:00
Yuri D'Elia
19589f02f1
Remove an unused define
2019-12-04 17:22:21 +01:00
Alex Voinea
779423f0e7
Move hardcoded values to variants
2019-11-29 15:06:54 +02:00
DRracer
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
Marek Bel
0fda4e5594
Merge branch 'cut_last_try' into enable_cutter
2019-09-10 18:37:09 +02:00
DRracer
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
MRprusa3d
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h
2019-09-09 02:20:39 +02:00
Marek Bel
3da43ae8c2
Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile.
2019-08-26 21:14:07 +02:00
Marek Bel
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
Marek Bel
469ca6e184
Merge commit 'refs/tags/v3.8.0-RC1^{}' into enable_cutter
2019-08-15 14:48:28 +02:00
Simon Benoit
49d2866b48
Add threshold distance to Z calibration
...
Add missing if statement
2019-07-30 19:43:07 -04:00
DRracer
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811
...
"disable_z()" for Delta PSU
2019-07-16 16:46:34 +02:00
MRprusa3d
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
MRprusa3d
4db4f19128
'variant files' update ;-(((
2019-07-03 18:14:48 +02:00
MRprusa3d
7e3cb98a1f
& MK3S
2019-07-03 17:50:41 +02:00
Marek Bel
181c42fa62
Merge remote-tracking branch 'prusa3d/MK3' into enable_cutter
2019-06-18 20:03:41 +02:00
MRprusa3d
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
Marek Bel
00da4640e2
Document.
2019-05-30 23:29:33 +02:00
Marek Bel
469aa10097
Enable MMU cutter.
2019-03-29 07:27:29 +01:00
MRprusa3d
632781c4a2
"disable_z()" for Delta PSU
2019-03-21 00:45:15 +01:00
Harpalyke
0f21ccee3c
Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S
2019-03-19 21:39:59 +00:00
MRprusa3d
7d98177716
farmMode updates
2019-03-19 19:48:40 +01:00
PavelSindler
c05561d6b1
Merge pull request #1607 from PavelSindler/7x7
...
7x7 mbl and switching mmu modes
2019-03-15 19:55:15 +01:00
PavelSindler
0ca52216f3
Revert "variants update"
...
This reverts commit c3a95ab79b
2019-03-15 13:14:32 +01:00
Marek Bel
ffe45bdef3
Disable mmu filament cutter feature.
2019-03-15 03:38:37 +01:00
PavelSindler
9e0e4198c5
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
2019-03-14 01:52:44 +01:00
PavelSindler
c3a95ab79b
variants update
2019-03-12 11:57:35 +01:00
PavelSindler
a220c97f94
Revert "variant files"
...
This reverts commit 850d3316b6
2019-02-06 16:19:30 +01:00
PavelSindler
850d3316b6
variant files
2019-02-06 15:18:12 +01:00
PavelSindler
5324181bf7
maximum bed level correction value enlarged from 50um to 100um and is now used in menus and mesh bed leveling itself
2019-02-03 20:56:14 +01:00
PavelSindler
60acdd23c5
variants
2019-01-28 21:12:38 +01:00
