Use newer version of MK404-build.sh instead start the program
Added _RAM-<value> and _FLASH-<value> as OUTPUT_FILE_SUFFIX if someone builds an atmega404 firmware
Added some logic if IDE 1.8.13 is used
Added some logic if Arduino_boards 1.0.4 is used
Fixed typo
Restore original `Configuration.h` and `config.h` in case of cannceled script or failed compiling during next start of this script.
use function
Improve MK404 usage
Added _RAM-<value> and _FLASH-<value> as OUTPUT_FILE_SUFFIX if someone builds an atmega404 firmware
Added some logic if IDE 1.8.13 is used
Added some logic if Arduino_boards 1.0.4 is used
Fixed typo
Change atmega404 board flash argument to y
Use newer version of MK404-build.sh instead start the program
MK404-build.sh
Change board_flash argument to 'y' and firmware_version to 'f
Check for "gawk" on Linux
Add argument to change build number automatically to current commit or define own number
Update exit numbers 1-13 for prepare build env 21-29 for prepare compiling 30-36 compiling
* Fix rm ... output issue
Remove files only if they exist
* Fix Italian missing translations
There have been only 362 instead of 365
Sorry for that, normally I double check this.
* Added `not_tran` and `not_used` files
This makes it easier to find missing or obsolate translations
* Revert "Added `not_tran` and `not_used` files"
This reverts commit a1b53dde663dc20a105fd3fa817e612ef999cb97.
These should be ignored
* Ignore ALL `not_tran`and `not_used` files
* Add and update missing translations
- updated in Firmware/ files the missing `c=xx` column and `r=yy` rows.
- added missing translations to lang/lang_en*.txt
Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments.
Preparing translations files without that information is a pain in the ... and takes way more time for somebody else
to review to code as it would take you.
* No need to have `MSG_abcde` again in comments `////` in `messages.c`
* German translation
* Missed a space
* Use the same format as somewhere else
* French translation.
I am not a native French speaking person, so please excuse my mistakes I may have done.
* Spanish translation.
I am not a native Spanish speaking person, so please excuse my mistakes I may have done.
* CZ translation
* Fix typos
* Another fix
It is
Dimmwert and not Dim Wert
* Fix issues reported by `lang-check.py`
* Add "difficult" messages containing `%`
* Updated MSG and German translation
* removed a translation as it breaks the language selection
* No need to wait until any-key is pressed
* No need to wait any-key is pressed
* Fixed two LF issues
* Updated PO files
ready to be send to translators
* Add missing italian translations
* Improve some existing italian translations
* More italian fixes
* More italian fixes
* Add exceptions in editorconfig for po files to avoid recoding
* Fix typo
Thanks @DRracer for pointing out
* Italian translation by @wavexx
* Update po/new/*.po files
* Update after merging MK3 branch
* Update French translation and some c=xx comments
Big thanks to @awenelo @carlin57 for helping with the french translations and their comments.
* Update po files after French translation
* Fixed most `lang-check.py` reported translation errors for Czech and German.
Two Czech have to be reviewed as these are too long.
One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message.
One German translation seams to be to long but have to review the actual max length
* Fix `lang-check.py` Spanish translation errors
There have been quite lot TOO long messages,
Can't imagine that nobody every complained about that.
* Fix `lang-check.py` Italian translations errors
* Update not_tran and not_used files after fixing several translations
* Some more error fixes and update of `po` files
* Polish translation
* Czech updated
* Fix typo
* no need to translate `\x00` if it is the same
* Polish: Runouts->Koniec
* Polish: Runouts->Konce f ... hopefully the last change
* Added MK2.5/s auto power mode to eeprom doxygen
* Final updates.
- Compiled all versions with multi-languages
- Compiled all versions with EN_ONLY
- updated all /lang/po/Firmware*.* files
* Add crlf attributes for po files
As done for editorconfig, this similarly forces git to handle
po files consistently in DOS format.
* Further improvent of IT translations
* Updated translation
Added cleanup to PF-build.sh
* remove lang/not_tran* and lang/not_used mistakenly added into the PR
Co-authored-by: DRracer <drracer@seznam.cz>
Co-authored-by: Yuri D'Elia <wavexx@thregr.org>
Co-authored-by: D.R.racer <drracer@drracer.eu>
to have seperated build enviroments depening on Arduino IDE versions and board-versions.
Successfully tested with:
- Arduino IDE 1.8.5 and board version 1.0.1
- Arduino IDE 1.8.5 and board version 1.0.2
- These two above generate identical hex files
- Arduino IDE 1.8.7 and board version 1.0.2
- Arduino IDE 1.8.8 and board version 1.0.2
- Arduino IDE 1.8.9 and board version 1.0.2
- These three above generate identical hex files
- Compared to the 1.8.5 hex files the code uses less resources (Multi language/EN_ONLY):
```
Sketch uses 240082 bytes (94%) of program storage space. Maximum is 253952 bytes.
Global variables use 6002 bytes of dynamic memory.
Sketch uses 222344 bytes (87%) of program storage space. Maximum is 253952 bytes.
Global variables use 6019 bytes of dynamic memory.
```
vs.
```
Sketch uses 241526 bytes (95%) of program storage space. Maximum is 253952 bytes.
Global variables use 6046 bytes of dynamic memory.
Sketch uses 223828 bytes (88%) of program storage space. Maximum is 253952 bytes.
Global variables use 6065 bytes of dynamic memory.
```
Failed tests:
- Arduino IDE 1.8.6 and board version 1.0.2
- Arduino IDE 1.8.10 and board version 1.0.2
As I am planning to add new Prusa Arduino_Boards definition version 1.0.2 which contains few changes which interfere withthe existing PF-build.sh using Arduino_Boards v1.0.1,
i had to add an additional variable.
I have tested PF-build.sh with Arduino_Boards v1.0.1 and v1.0.2
It creates identical firmware hex files, if I manage it to run in the same minute.
If one of the runs is off by a minute compared to the other there is just one line in the hex code different,
which is showing the compiling date, time and firmware version.
- Changed Build-env path to "PF-build-dl" as requested in PR https://github.com/prusa3d/Prusa-Firmware/pull/2028
- Changed Hex-files folder to PF-build-hex as requested in PR
- Added Finding OS version routine so supporting new OS should get easier
