3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,167 Commits 3 Branches 78 Tags 40 MiB
a789a8995f
Commit Graph

2438 Commits

Author SHA1 Message Date
Marek Běl
a789a8995f
Merge pull request #2145 from mkbel/fix_sheet_reset 
Fix sheet reset
 2019-08-30 16:49:34 +02:00
Marek Bel
865484590b Change default sheet name from "<number>" to "Sheet <number>". 2019-08-30 16:11:41 +02:00
Marek Bel
3d292350d4 Do not activate selected_sheet in lcd_v2_calibration() as this leads to calibrating random sheet if activated from calibration menu. 
selected_sheet is initialized to 0 and contains index of last Sheet menu visited.
 2019-08-30 14:45:25 +02:00
Marek Bel
26423f98bc Switch to next sheet if currently selected sheet is not initialized. Move next_initialized_sheet() and change_sheet_from_menu() to eeprom.cpp, rename it to eeprom_next_initialized_sheet() and eeprom_switch_to_next_sheet(). Rename default_sheet_name() to eeprom_default_sheet_name(). 2019-08-30 12:24:13 +02:00
Marek Bel
6c78c2fad5 Fix compiler warning. 2019-08-30 12:03:35 +02:00
Marek Bel
50a8c16f27 Use EEPROM update instead of write. 2019-08-30 12:00:33 +02:00
Marek Bel
8c8619be05 Convert reset sheet sub menu to function. 2019-08-29 20:52:53 +02:00
Marek Bel
abf84e36f5 Fix sheet menu back caption to Steel sheets to match parent menu caption. 2019-08-29 20:23:02 +02:00
Marek Bel
d647cdc02c Convert sheet switcher from sub menu to function. Handle null characters in sheet name. 2019-08-29 20:13:10 +02:00
Marek Bel
cd7805ba46 Document 2019-08-29 18:26:24 +02:00
Marek Bel
0b196da6fc Migrate old vale of EEPROM_BABYSTEP_Z only if active sheet is not initialized. 2019-08-29 18:07:49 +02:00
Marek Bel
32f435d1a0 Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup. 2019-08-29 17:21:08 +02:00
Marek Běl
3413d5d486
Merge pull request #2139 from DRracer/assist-mode-fixes 
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
 2019-08-29 15:55:49 +02:00
Marek Běl
fec92b33ae
Merge pull request #2137 from DRracer/illegal-fat-characters-revised 
Support for more special characters allowed in file names (^ + = [ ] ;
 2019-08-29 15:55:36 +02:00
Marek Bel
f3bb72be64 Reset calibration status if there is no calibrated sheet after reset. 2019-08-29 03:33:33 +02:00
Marek Bel
f64252b59b Hide sheet switcher from main menu, if there are less than 2 sheets calibrated. 2019-08-28 19:08:53 +02:00
Marek Bel
9692f94683 Move sheet menu up to be after Print from SD. 2019-08-28 19:01:48 +02:00
Marek Bel
3903dc819a Extract function next_initialized_sheet from change_sheet_from_menu(). Make it more general to depend on sizeof(Sheets::s) instead of hard coded value of 2. 2019-08-28 18:59:48 +02:00
Marek Bel
33675c6d1e Change default sheet names. 2019-08-28 18:16:35 +02:00
Marek Bel
49bc11037c Remove statements with no effect. 2019-08-28 18:14:10 +02:00
DRracer
1d23cc52e9 endstop sound alert fixes 2019-08-28 09:39:28 +02:00
DRracer
1a1be5c518 Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to 
select filament
 2019-08-27 17:10:29 +02:00
Marek Bel
bf2097342d Add ASA preheat into mFilamentMenu(); 2019-08-27 17:01:41 +02:00
DRracer
11ce786aaa Support for more special characters allowed in file names (^ + = [ ] ; 
,)
 2019-08-27 13:47:58 +02:00
DRracer
6aaa40b9a3
Merge pull request #2134 from mkbel/fix_power_panic 
Fix repeated power panic restarted print from beginning or jumped at …
 2019-08-27 08:13:26 +02:00
DRracer
a1e68c3d7f
Merge pull request #2135 from prusa3d/MK3_3.8.0 
Increase version to 3.8.0-RC2 and build number to 2639.
 2019-08-27 08:12:27 +02:00
Marek Bel
159a1a70d8 Update documentation. 2019-08-26 17:19:57 +02:00
Marek Bel
c27fcf9cff Increase version to 3.8.0-RC2 and build number to 2639. 2019-08-26 17:03:18 +02:00
Marek Bel
52cb37770b Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card. 
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
 2019-08-23 19:30:20 +02:00
Marek Bel
3eb36ca194 Fix cmdqueue_dump_to_serial. 
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
 2019-08-23 16:48:30 +02:00
XPila
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance 
Improve performance of bed PWM automaton
 2019-08-22 14:45:01 +02:00
DRracer
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1 
Code size reduced by almost 5KB
 2019-08-22 14:25:23 +02:00
DRracer
a7c2aec04c Code size reduced by almost 5KB 2019-08-21 09:59:51 +02:00
Marek Bel
3ed6d0637c Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu. 
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
 2019-08-20 19:32:39 +02:00
Marek Bel
f204cdea81 Refactor 
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.

Saves 34B of FLASH and 2B of RAM.
 2019-08-20 17:22:27 +02:00
DRracer
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal 
Fix mmu lay1cal
 2019-08-19 19:07:10 +02:00
Marek Bel
f0642f88f1 Fix power panic broken when PSU_Delta defined. 
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
 2019-08-19 17:37:23 +02:00
Marek Bel
170c1ea866 Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved. 2019-08-16 20:47:55 +02:00
Marek Bel
e53734895f Make MMU load failed blocking to workaround lack of resume print menu item. 
The same workaround used as for USB print (Octoprint).
 2019-08-16 20:20:17 +02:00
Marek Bel
1036c4f755 Do not precede first layer calibration without filament if print is paused due to MMU load failed. 2019-08-16 19:00:45 +02:00
Marek Bel
b10bd8340a Make local functions static. 2019-08-15 17:57:30 +02:00
Marek Bel
0b798767af Fix preheat ASA. 2019-08-15 17:54:23 +02:00
Marek Bel
a6f955b62d Use unused macros *_PREHEAT_FAN_SPEED. 2019-08-15 17:47:34 +02:00
Marek Bel
eb68bb9b43 Add ASA preheat. 2019-08-15 17:46:29 +02:00
Marek Bel
36a69281ee Remove unused functions forward declarations. 2019-08-15 17:36:05 +02:00
DRracer
0e4e644476
Merge branch 'MK3' into MK3_3.8.0 2019-08-15 10:34:50 +02:00
DRracer
ba81149afe
Merge branch 'MK3' into MK3_3.7.3 2019-08-15 10:25:51 +02:00
DRracer
dc78bc7362 Improve performance of bed PWM automaton - proof of concept 
There are still some artefacts on the output pin - work in progress.
 2019-08-14 17:53:08 +02:00
DRracer
2ddbd606f2 Version changed (3.8.0 build 2608) 2019-08-08 16:44:16 +02:00
DRracer
84cf1b83c3
Merge pull request #2083 from DRracer/viper 
Workaround for the "viper" situation bug.
 2019-08-07 17:48:57 +02:00