3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,096 Commits 3 Branches 78 Tags 40 MiB
bd554df02e
Commit Graph

1603 Commits

Author SHA1 Message Date
MRprusa3d
bd554df02e MeshBed Levelling Fail IV 2018-11-08 03:54:05 +01:00
MRprusa3d
46b2c93d60 MeshBed Leveling Fail III 2018-11-06 01:44:53 +01:00
MRprusa3d
9953518681 MeshBed Leveling Fail II 2018-11-06 01:28:47 +01:00
MRprusa3d
73794b56cf MeshBed Leveling Fail 
Z-leveling after MeshBed leveling failing
 2018-11-02 23:03:14 +01:00
PavelSindler
6a82af487e
Merge pull request #1278 from XPila/MK3-new_bs 
New lang - fixed french langcode and comparsion in lang-clean script
 2018-10-26 13:18:48 +02:00
mkbel
16c2f6fe8e
Merge pull request #1279 from PavelSindler/turn_on_FINDA 
mmu2: filament senor (FINDA) menu fix
 2018-10-25 21:53:11 +02:00
PavelSindler
a9317b4d36 upstream/MK3 merge 2018-10-25 21:46:32 +02:00
mkbel
cdb06c65f3
Merge pull request #1275 from PavelSindler/3_4_2_branch_merging 
3_4_2 branch merging into MK3
 2018-10-25 21:45:51 +02:00
PavelSindler
0e0dbad871 #ifdef __cplusplus added to allow including to .c file 2018-10-25 21:06:37 +02:00
PavelSindler
01529f18d2 upstream/MK3 merge 2018-10-25 20:57:27 +02:00
PavelSindler
a6a81c6ea6 mmu2: filament senor (FINDA) can be switched ON/OFF from menu without dependency on pat9125 state 2018-10-25 18:26:26 +02:00
Robert Pelnar
d301aa0e8c New lang - fixed french langcode and comparsion in lang-clean script 2018-10-25 18:16:36 +02:00
Robert Pelnar
7e9eaf0f4b New lang, arduino 1.8.5 - disable multilanguage support by default 2018-10-23 17:32:52 +02:00
PavelSindler
bd8ca8d652 removed redefinition of functions in fsensor.cpp 2018-10-22 20:51:44 +02:00
PavelSindler
d1de9fff60 mmu_loop: missing return added 2018-10-22 20:38:32 +02:00
PavelSindler
d005005e22 Merge remote-tracking branch 'upstream/3_4_2' into 3_4_2_branch_merging 2018-10-22 20:33:38 +02:00
PavelSindler
940f436a5f merge MK3_dev into MK3 2018-10-22 20:25:29 +02:00
PavelSindler
bc247ca02c MK2.5 sw reset at setup function 2018-10-19 17:54:48 +02:00
Robert Pelnar
ac18eb67c0 New lang, arduino 1.8.5 - boot_app debug output 
+ variable _uartout linkage fix
+ DEBUG_DCODE5
 2018-10-18 16:20:14 +02:00
Robert Pelnar
563052d015 New lang, arduino 1.8.5 - language.c - DEBUG_SEC_LANG fix 2018-10-18 15:39:08 +02:00
Robert Pelnar
868c79e835 New lang, arduino 1.8.5 - language.h - section names, messages.h - extern "C" added 2018-10-18 14:41:32 +02:00
PavelSindler
b8f92fdfa9 MK2.5 printers set mmu to stealth mode (using Mx code), required mmu2 buildnr can be different for MK2.5 and MK3 printers 2018-10-18 02:44:16 +02:00
mkbel
0d9b502937
Merge pull request #1246 from PavelSindler/variants_max 
MK3: default max feedrate for x and y changed to 100mm/s
 2018-10-10 16:46:34 +02:00
PavelSindler
bbd4f70f41
Merge pull request #1221 from XPila/MK3 
Update fsensor in Manage_inactivity instead of main loop.
 2018-10-10 13:12:12 +02:00
PavelSindler
866d6758c3
Merge pull request #1243 from mkbel/simplify_EEPROM_M500 
Simplify eeprom m500
 2018-10-10 13:11:17 +02:00
Marek Bel
9dff6431e6 Format fsensor documentation. 2018-10-09 22:33:54 +02:00
PavelSindler
809ae5a5f0 default max feedrate for x and y changed to 100mm/s 2018-10-09 20:03:28 +02:00
Marek Bel
9cae0c378a Rename _EEPROM_writeData to EEPROM_writeData. Rename _EEPROM_readData to EEPROM_readData. Add return value to EEPROM_writeData to detect failure to write. Do not mark data as valid, if write has failed. Remove EEPROM_WRITE_VAR and EEPROM_READ_VAR macros. Make pos input only parameter. Convert EEPROM_OFFSET macro to typed constatant EEPROM_M500_base, it was defined in two places, leave it in one place. Use Config_StoreSettings() instead of erase_eeprom_section(). Compare float with 0xff byte by byte to avoid compiler warning "Dereferencing type punned pointer will break strict aliasing rules." 2018-10-08 20:24:56 +02:00
PavelSindler
c91c878408
Merge pull request #1202 from MRprusa3d/PFW-573 
preHeatError
 2018-10-08 16:12:33 +02:00
Marek Bel
1585dc66b0 Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 
Known limitation: Unable to compile.
 2018-10-08 15:58:49 +02:00
Marek Bel
c77672bf0f PFW-608 Decrease wear of mass erase EEPROM and do it faster. 2018-10-05 18:11:26 +02:00
PavelSindler
436f5b5728 changed version 2018-10-04 17:40:38 +02:00
PavelSindler
d2aa13d333
Merge pull request #1199 from mkbel/document_gcodes1 
Documentation: Put scattered and unscattered Gcode documentation toge…
 2018-10-04 16:29:39 +02:00
Robert Pelnar
9960c80bf7 Additional check always with enabled oq_meassure 
+ variant files
 2018-10-04 16:12:41 +02:00
Robert Pelnar
f9d8c46802 Enable/disable optical quality meassurement in settings menu 2018-10-04 15:48:28 +02:00
Robert Pelnar
ced74b7ec2 Merge remote-tracking branch 'upstream/MK3' into MK3 2018-10-04 13:53:00 +02:00
Robert Pelnar
7882b3c975 Update fsensor in Manage_inactivity instead of main loop. 2018-10-03 17:29:24 +02:00
PavelSindler
3a58489c6a
Merge pull request #1169 from mkbel/remove_duplicate_debouncing_4 
Remove duplicate debouncing 4
 2018-10-02 11:21:17 +02:00
PavelSindler
bba1ffdb65 version change 2018-09-27 21:13:06 +02:00
PavelSindler
aefb4e5c09
Merge pull request #1200 from XPila/MK3 
Filament sensor - fix invalid calculation of fsensor_counter in LA st…
 2018-09-27 21:05:33 +02:00
Robert Pelnar
e50025cc7d static_assert - portable solution compatible with C++98 2018-09-27 19:59:29 +02:00
PavelSindler
7e9220ada2
Merge pull request #1198 from PavelSindler/communication_timeouts 
communication timeouts fix
 2018-09-27 11:23:58 +02:00
MRprusa3d
0184f06dcf preHeatError 
correction of preHeatError detection
 2018-09-27 04:23:00 +02:00
Robert Pelnar
c2f535b619 Filament sensor - fix invalid calculation of fsensor_counter in LA stepper. 
+decreased additional check sensitivity/sctrictness
 2018-09-26 18:59:07 +02:00
Marek Bel
0e33db0064 Documentation: Put scattered and unscattered Gcode documentation together in process_commands documentation. Mention at least existence of all implemented commands. Document T<n> and T? commands. 2018-09-26 18:55:31 +02:00
PavelSindler
e6a00b8f53 send busy messages when checking for filament presence 2018-09-25 19:14:57 +02:00
Marek Bel
4151e19781 Remove attribute packed. It is not needed on 8-bit platform. Change of platform would be detected by static_assert (sizeof(M500_conf) == 188). 2018-09-25 16:27:20 +02:00
Marek Bel
d80fcab66c Disable filament sensor response quality check. 2018-09-25 15:50:50 +02:00
Marek Bel
19c1ba6274 Remove duplicate condition. This condition was already in if(mmu_enabled) {} else branch. 2018-09-25 14:25:03 +02:00
Marek Bel
ccfcc6f989 Document. 2018-09-24 18:32:01 +02:00