3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
673 Commits 3 Branches 78 Tags 40 MiB
cbcfcee48f
Commit Graph

219 Commits

Author SHA1 Message Date
PavelSindler
cbcfcee48f PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu 2018-01-25 15:23:11 +01:00
XPila
556205d993
Merge pull request #432 from PavelSindler/invalid_gcodes 
invalid / unknown gcodes reported on serial
 2018-01-24 00:12:47 +01:00
XPila
975ed14cb6
Merge pull request #431 from PavelSindler/fan_error_resume 
SD card long pause update
 2018-01-24 00:12:33 +01:00
XPila
b2ba72ffcd
Merge pull request #411 from PavelSindler/typo_fixed 
typo fixed
 2018-01-24 00:10:28 +01:00
XPila
777dcf072b
Merge pull request #430 from bubnikv/MK3_fsensor_fullrate 
Optimization of the filament sensor.
 2018-01-24 00:10:00 +01:00
PavelSindler
70ff22571f minor change 2018-01-23 20:04:18 +01:00
PavelSindler
3adedb558b invalid / unknown codes reported on serial 2018-01-23 20:01:02 +01:00
PavelSindler
64a709c097 removed temporary debuging code 2018-01-23 19:14:52 +01:00
PavelSindler
05e0abbd9d startFileprint delayed 2018-01-23 19:11:04 +01:00
bubnikv
44dc12005f Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
PavelSindler
c38458eb67 init 2018-01-23 16:21:43 +01:00
XPila
09e0c566e8
Merge pull request #420 from bubnikv/MK3_stepper_blocking 
Mk3 stepper blocking
 2018-01-23 13:15:59 +01:00
bubnikv
69f97e0ec3 Separated the "Unknown" build from the "Development" build. 
Documented purpose of the various build types.
 2018-01-22 17:41:05 +01:00
bubnikv
a94e266cf1 Documented CPU load and frequency of the following interrupts: 
9.  ISR(INT7_vect) 			- Fan signal interrupt
26. ISR(M_USARTx_RX_vect)	- USB to serial RX
37. ISR(USART1_RX_vect)		- R-PI serial RX
 2018-01-20 16:20:51 +01:00
bubnikv
815dfcb14b Implemented a stepper timer reset after a long blocking cli() 
or DISABLE_STEPPER_DRIVER_INTERRUPT().
If this is not done, the stepper interrupt would likely overflow,
leading to a maximum 32ms delay before the stepper interrupt wakes up.
In addition, the stepper timer overflow error would be reported
by the debug builds.
 2018-01-20 15:39:21 +01:00
bubnikv
9e534c1990 Minimize risk of stepper routine interrupt blocking by reorganizing 
the routine to move the G-code line length from the command queue
to the planner queue.
 2018-01-20 14:37:22 +01:00
bubnikv
330f1576fc Support for debug builds: 
A build version and repository is displayed on the welcome screen,
D-codes, stack overflow check and stepper timer overflow check
are enabled in the debug mode.
 2018-01-18 16:24:25 +01:00
PavelSindler
b5f8b1d97c
Merge pull request #412 from PavelSindler/debug_version 
initial message for debugging fw version
 2018-01-18 13:18:16 +01:00
PavelSindler
e60cb2a79e unload filament sequence same as in M600 2018-01-17 21:54:34 +01:00
PavelSindler
4843f2c48e initial message not shown on release candidate versions 2018-01-17 17:38:34 +01:00
PavelSindler
bfa675c1a4 initial message for debugging fw version 2018-01-17 16:00:19 +01:00
PavelSindler
b73520bcea successfull -> successful 2018-01-17 14:40:37 +01:00
PavelSindler
fbf947b75c maiden eeprom: tmc2130_mode is set to normal 2018-01-16 16:56:58 +01:00
XPila
026f68fd6f
Merge pull request #404 from PavelSindler/xyz_fixes 
xyz homing hotfix, xyz cal. status changed
 2018-01-16 01:39:57 +01:00
XPila
9efa1d3a03
Merge pull request #403 from PavelSindler/M600_update 
timeout fix and unload message shortened
 2018-01-16 01:39:18 +01:00
PavelSindler
06c6cc119b xyz homing hotfix, xyz cal. status changed 2018-01-16 01:00:09 +01:00
PavelSindler
d8117eab66 timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened 2018-01-15 17:39:42 +01:00
Robert Pelnar
981a681e52 Temperature ISR synchronization, M600 - faster unload 2018-01-15 17:29:07 +01:00
XPila
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update 
M600 update
 2018-01-15 15:27:41 +01:00
PavelSindler
9e7686b77f unload changes reverted back 2018-01-15 11:35:49 +01:00
PavelSindler
c36af887b7 M600 has timeout for nozzle, different procedure for unload 2018-01-15 11:30:28 +01:00
Robert Pelnar
9aedaa8fe7 build 146 
hard limits
fsensor overflow fix
 2018-01-14 23:59:43 +01:00
PavelSindler
8bd84ba4fd
Merge pull request #396 from XPila/MK3 
Mk3
 2018-01-12 22:08:50 +01:00
bubnikv
82304a2268 Slight optimization of the fan speed interrupt routine by accessing 
the Arduino millis() without locking interrupts.
 2018-01-12 21:16:29 +01:00
Robert Pelnar
ebf6d08fae Crash detection - message on lcd (PFW-115) 2018-01-12 21:02:49 +01:00
PavelSindler
1fbed53200 initial 2018-01-12 20:01:22 +01:00
bubnikv
cfae8f859d
Merge branch 'MK3' into fw_versions 2018-01-11 16:58:47 +01:00
PavelSindler
087532085f development fw versions has initial message for warning 2018-01-11 15:50:26 +01:00
Robert Pelnar
0d269261e4 PFW-110 - load filament - beep when loading finished. 2018-01-10 18:50:16 +01:00
Robert Pelnar
43010b30b4 Build 143f 
Crashdetection improoved, blocking temperature ISR fixed, limits for silent mode adjusted.
 2018-01-09 19:54:07 +01:00
Robert Pelnar
0a2087c1cb build 143e 
Linear advance disabled
Max feedrate reduced to 200mm/s
Silent max accel reduced to 984mm/s^2
some debug logs removed, tmc_init - log message fixed
 2018-01-04 18:08:22 +01:00
Robert Pelnar
8a5ba89a9c Missing serial characters debuging 
disabled fan ISR
disabled fsensor ISR
disabled linear advance
build 143b
 2018-01-02 20:55:33 +01:00
Michal Průša
734639c1da Unload filament tweak 
unload filament now has longer and faster slow retract.
 2017-12-29 17:53:12 +01:00
Phil Dubach
7fb1234855 Turn off bed heater after temp calibration 
After finishing the temperature calibration, turn off the bed heater
right away, before waiting for the user to acknowledge completion.
 2017-12-28 23:47:27 -08:00
Michal Průša
f71f133e80 power panic polished 
Retraction set correctly to have minimum missing line
Z motor current not lowered that drascialy
Extruder motor turning off instantly
Beeping added to the end
 2017-12-28 23:26:06 +01:00
Michal Průša
f1c741d027 Filament autoloading improved and minor tweaks 
Filament autoloading now acts like normal loading (Error message pops out if nozzle too cold, Printer asks if should extrude more when done loading)

Autoloading now unable to turn on when filament sensor is turned off or not responding

Color not right changed to color not correct to avoid slight confusion
 2017-12-28 18:59:57 +01:00
Robert Pelnar
bd58718d9d dummy "ok" response 
build 139 (RC4)
 2017-12-28 02:45:05 +01:00
Robert Pelnar
e064133a04 Merge remote-tracking branch 'upstream/MK3' into MK3 
# Please enter a commit message to explain why this merge is necessary,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
 2017-12-28 01:37:13 +01:00
Robert Pelnar
546314fda7 Removed debug messages from serial comunication (octoprint...). 
build 137b
 2017-12-27 20:29:24 +01:00
PavelSindler
8f7a50cfcd
Merge pull request #343 from PavelSindler/m110_fix 
M110 fix
 2017-12-23 00:04:11 +01:00