PavelSindler
4843f2c48e
initial message not shown on release candidate versions
2018-01-17 17:38:34 +01:00
PavelSindler
bfa675c1a4
initial message for debugging fw version
2018-01-17 16:00:19 +01:00
PavelSindler
b73520bcea
successfull -> successful
2018-01-17 14:40:37 +01:00
XPila
b2c257478c
Merge pull request #409 from XPila/MK3
...
3.1.1-RC5 build 148
2018-01-16 19:27:00 +01:00
Robert Pelnar
36e4e39c85
3.1.1-RC5 build 148
2018-01-16 19:25:09 +01:00
XPila
515420ce06
Merge pull request #407 from PavelSindler/MK3_for_merging
...
maiden eeprom: tmc2130_mode is set to normal
2018-01-16 17:10:38 +01:00
XPila
d5500db66d
Merge pull request #408 from XPila/MK3
...
Mk3
2018-01-16 17:10:07 +01:00
Robert Pelnar
c2710fea63
crashdetection limits changed (X=48, Y=64)
2018-01-16 17:04:21 +01:00
PavelSindler
fbf947b75c
maiden eeprom: tmc2130_mode is set to normal
2018-01-16 16:56:58 +01:00
Robert Pelnar
6b5f9253d6
build 147
2018-01-16 16:50:05 +01:00
XPila
026f68fd6f
Merge pull request #404 from PavelSindler/xyz_fixes
...
xyz homing hotfix, xyz cal. status changed
2018-01-16 01:39:57 +01:00
XPila
9efa1d3a03
Merge pull request #403 from PavelSindler/M600_update
...
timeout fix and unload message shortened
2018-01-16 01:39:18 +01:00
XPila
b9746f84c6
Merge pull request #405 from XPila/MK3
...
Mk3
2018-01-16 01:37:45 +01:00
Robert Pelnar
f30da4bbca
babystep synchronisation
2018-01-16 01:34:44 +01:00
PavelSindler
06c6cc119b
xyz homing hotfix, xyz cal. status changed
2018-01-16 01:00:09 +01:00
PavelSindler
d8117eab66
timeout fix and MSG_UNLOAD_SUCCESSFULL message shortened
2018-01-15 17:39:42 +01:00
Robert Pelnar
981a681e52
Temperature ISR synchronization, M600 - faster unload
2018-01-15 17:29:07 +01:00
XPila
9d52d017df
Merge pull request #401 from PavelSindler/rx_buffer
...
get command update
2018-01-15 15:28:19 +01:00
XPila
87ffb0b193
Merge pull request #400 from PavelSindler/M600_update
...
M600 update
2018-01-15 15:27:41 +01:00
XPila
f1d30d99fe
Merge pull request #402 from XPila/MK3
...
fixed bug - fsensor synchronization (b146)
2018-01-15 15:26:33 +01:00
Robert Pelnar
aaf4e0a5e0
fixed bug - fsensor synchronization (b146)
2018-01-15 15:23:06 +01:00
PavelSindler
1d3f6e8be5
flush rx buffer in case that it was full
2018-01-15 12:18:21 +01:00
bubnikv
1eac2b4ccb
Fixed a regression error from the last commit regarding Z homing.
...
Removed unused Z_LATE_ENABLE symbol.
2018-01-15 12:00:28 +01:00
PavelSindler
9e7686b77f
unload changes reverted back
2018-01-15 11:35:49 +01:00
PavelSindler
c36af887b7
M600 has timeout for nozzle, different procedure for unload
2018-01-15 11:30:28 +01:00
PavelSindler
8ff38493f0
Merge pull request #399 from XPila/MK3
...
build 146
2018-01-15 01:44:10 +01:00
Robert Pelnar
9aedaa8fe7
build 146
...
hard limits
fsensor overflow fix
2018-01-14 23:59:43 +01:00
bubnikv
7a972fd9b0
Split the stepper ISR routine into multiple inline functions,
...
added an optimized DDA routine for moves with less than 32767 ticks.
2018-01-14 22:37:07 +01:00
PavelSindler
3201fd1538
removed duplicit comment
2018-01-14 19:36:30 +01:00
bubnikv
30b06488ca
Redefined the DDA step and accumulator values to unions to support
...
access to the low / high words of the 32bit values.
This is a prerequisity for an optimized 16bit only DDA
in case the number of step is lower than 32767.
2018-01-14 17:01:04 +01:00
bubnikv
a1fd50ea9a
Simlified the extruder ticking code.
2018-01-14 14:45:27 +01:00
XPila
e3dadfde71
Merge pull request #397 from XPila/MK3
...
build 145
2018-01-13 19:16:53 +01:00
Robert Pelnar
552b1f03b1
build 145
...
fixed - finishstatus declaration
2018-01-13 19:16:09 +01:00
XPila
78d6088d48
Merge pull request #392 from PavelSindler/fail_stats
...
filament fails counter fix
2018-01-12 22:23:18 +01:00
PavelSindler
8bd84ba4fd
Merge pull request #396 from XPila/MK3
...
Mk3
2018-01-12 22:08:50 +01:00
PavelSindler
a0555f49c4
Merge pull request #395 from bubnikv/MK3
...
Slight optimization of the fan speed interrupt routine by accessing
2018-01-12 22:08:35 +01:00
bubnikv
5ed9233abc
Missed a bit with the last commit.
2018-01-12 22:01:53 +01:00
Robert Pelnar
530dfba417
Status message limit (PFW-124)
2018-01-12 21:21:21 +01:00
bubnikv
82304a2268
Slight optimization of the fan speed interrupt routine by accessing
...
the Arduino millis() without locking interrupts.
2018-01-12 21:16:29 +01:00
PavelSindler
b2e6779782
Merge pull request #394 from bubnikv/MK3
...
Slight optimization of the stepper timer routine.
2018-01-12 21:02:50 +01:00
Robert Pelnar
ebf6d08fae
Crash detection - message on lcd (PFW-115)
2018-01-12 21:02:49 +01:00
bubnikv
135dda1bff
Slight optimization of the stepper timer routine.
...
Use WRITE_NC instead of WRITE for writing into the slow ports.
2018-01-12 21:01:01 +01:00
PavelSindler
be341d9825
Merge pull request #393 from bubnikv/MK3
...
Mk3
2018-01-12 20:53:47 +01:00
bubnikv
3e6d853364
Debugging of the stepper timer routine. When enabled through
...
DEBUG_STEPPER_TIMER_MISSED, the printer is halted on stepper timer overflow
and an error message is displayed.
2018-01-12 20:51:14 +01:00
PavelSindler
23b78da2f5
filament fails counter fixed
2018-01-12 20:21:07 +01:00
bubnikv
26747d7236
Definition of 8 pins on the Einsy 0.4 board connected to pin headers
...
to be monitored by an 8 channel logic analyzer, for example the Saleae.
2018-01-12 20:18:20 +01:00
bubnikv
db985065ff
WRITE_NC macro for non-critical (non-synchronized) access to
...
slow ports. The WRITE macro stores the CPU bits on the stack first,
then locks the interupts, reads the port, sets a bit, writes the port
and then finally reverts the CPU bits. The WRITE_NC does not lock
the interrupts, therefore it may only be used where it cannot
be interrupted.
2018-01-12 20:15:59 +01:00
PavelSindler
1fbed53200
initial
2018-01-12 20:01:22 +01:00
Robert Pelnar
0f46fa0c37
blocking messages in settings/tune menu (PFW104)
...
switch normal/stealth (PFW110)
2018-01-12 19:54:32 +01:00
PavelSindler
6643f77648
Merge pull request #390 from PavelSindler/MK3_for_merging
...
commit nr updated
2018-01-11 17:52:15 +01:00
