| .. |
|
builds/1_75mm_MK3-EINY04-E3Dv6full
|
bugfix UVLO - extruder position from stepper
|
2017-11-29 02:08:15 +01:00 |
|
variants
|
Configuration files reordered and added build number
|
2017-11-07 23:54:06 +01:00 |
|
boards.h
|
EINY -> EINSY
|
2017-11-27 18:47:48 +01:00 |
|
cardreader.cpp
|
first working version
|
2017-11-27 06:20:51 +01:00 |
|
cardreader.h
|
first working version
|
2017-11-27 06:20:51 +01:00 |
|
cmdqueue.cpp
|
initial version - messages missing (will not compile)
|
2017-11-07 16:49:04 +01:00 |
|
cmdqueue.h
|
initial version - messages missing (will not compile)
|
2017-11-07 16:49:04 +01:00 |
|
Configuration_adv.h
|
Merge pull request #47 from PavelSindler/MK3
|
2017-09-22 14:39:52 +02:00 |
|
Configuration_prusa.h
|
pat9125 reinit when fsensor enabled from menu.
|
2017-11-28 22:44:58 +01:00 |
|
Configuration.h
|
changed version
|
2017-11-29 14:11:31 +01:00 |
|
ConfigurationStore.cpp
|
eeprom error message
|
2017-09-21 15:35:46 +02:00 |
|
ConfigurationStore.h
|
fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified
|
2017-09-21 15:20:02 +02:00 |
|
Dcodes.cpp
|
PINDA calibration and precalibrated characteristics.
|
2017-11-27 07:09:53 +01:00 |
|
Dcodes.h
|
Fsensor synchronization and triggering improved
|
2017-11-24 21:53:35 +01:00 |
|
digipot_mcp4451.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
dogm_font_data_marlin.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
dogm_lcd_implementation.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
DOGMbitmaps.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
fastio.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Firmware.ino
|
opravene nezadouci resetovani watchdogem
|
2017-11-27 14:43:56 +01:00 |
|
Firmware.ino.rambo.hex
|
bugfix UVLO - extruder position from stepper
|
2017-11-29 02:08:15 +01:00 |
|
Firmware.sublime-project
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
fsensor.cpp
|
bugfix - Filament sensor enable from menu
|
2017-11-29 00:15:45 +01:00 |
|
fsensor.h
|
pat9125 reinit when fsensor enabled from menu.
|
2017-11-28 22:44:58 +01:00 |
|
langtool.php
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
langtool.pl
|
Sg load meassurement durring self test - 'Belt status'
|
2017-11-27 04:46:58 +01:00 |
|
language_all.cpp
|
unload filament can be repeated
|
2017-11-28 19:04:43 +01:00 |
|
language_all.h
|
unload filament can be repeated
|
2017-11-28 19:04:43 +01:00 |
|
language_common.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
language_cz.h
|
unload filament can be repeated
|
2017-11-28 19:04:43 +01:00 |
|
language_de.h
|
basic language corrections
|
2017-11-21 14:44:07 +01:00 |
|
language_en.h
|
unload filament can be repeated
|
2017-11-28 19:04:43 +01:00 |
|
language_es.h
|
basic language corrections
|
2017-11-21 14:44:07 +01:00 |
|
language_it.h
|
basic language corrections
|
2017-11-21 14:44:07 +01:00 |
|
language_pl.h
|
basic language corrections
|
2017-11-21 14:44:07 +01:00 |
|
language.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
le.sh
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
LiquidCrystal.cpp
|
Print class printf function (experimental, disabled by default)
|
2017-11-20 20:09:54 +01:00 |
|
LiquidCrystal.h
|
Print class printf function (experimental, disabled by default)
|
2017-11-20 20:09:54 +01:00 |
|
Marlin_main.cpp
|
power panic in absolute mode fixed, but some e steps are probably missing
|
2017-11-29 14:05:47 +01:00 |
|
Marlin.h
|
filament unload - initial
|
2017-11-27 15:54:36 +01:00 |
|
MarlinSerial.cpp
|
setup second serial port only in case it is selected
|
2017-10-24 23:20:48 +02:00 |
|
MarlinSerial.h
|
setup second serial port only in case it is selected
|
2017-10-24 23:20:48 +02:00 |
|
mesh_bed_calibration.cpp
|
whitespace
|
2017-11-22 19:18:32 +01:00 |
|
mesh_bed_calibration.h
|
Fixed homing (mbl and babystep - crashdetection recovery work fine now).
|
2017-09-23 16:35:01 +02:00 |
|
mesh_bed_leveling.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
mesh_bed_leveling.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
motion_control.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
motion_control.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
pat9125.cpp
|
bugfix - Filament sensor enable from menu
|
2017-11-29 00:15:45 +01:00 |
|
pat9125.h
|
PAT9125 - sampled only Y value, new debug code D9125.
|
2017-10-24 19:45:15 +02:00 |
|
pins_Einy_0_3.h
|
PINDA thermistor and ambient thermistor.
|
2017-09-05 14:02:35 +02:00 |
|
pins_Einy_0_4.h
|
M114 now reports also actual extruder position,
|
2017-10-22 22:42:45 +02:00 |
|
pins_Rambo_1_0.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
pins_Rambo_1_3.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
pins_Rambo.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
pins.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
planner.cpp
|
Merged lin adv. fix from MK2
|
2017-11-14 13:57:32 +01:00 |
|
planner.h
|
Fix of a power panic print stop.
|
2017-09-21 17:50:39 +02:00 |
|
qr_solve.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
qr_solve.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Sd2Card.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
Sd2Card.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
Sd2PinMap.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdBaseFile.cpp
|
first working version
|
2017-11-27 06:20:51 +01:00 |
|
SdBaseFile.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFatConfig.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdFatStructs.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdFatUtil.cpp
|
3.0.10 sync
|
2017-03-24 19:47:50 +01:00 |
|
SdFatUtil.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFile.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdFile.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
SdInfo.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdVolume.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
SdVolume.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Servo.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
Servo.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
speed_lookuptable.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
stepper.cpp
|
Merged lin adv. fix from MK2
|
2017-11-14 13:57:32 +01:00 |
|
stepper.h
|
fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified
|
2017-09-21 15:20:02 +02:00 |
|
swi2c.cpp
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swi2c.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swspi.cpp
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
swspi.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
temperature.cpp
|
Fsensor synchronization and triggering improved
|
2017-11-24 21:53:35 +01:00 |
|
temperature.h
|
fan check can be turned off from support menu, saving parameters to eeprom with offset and different levels, fan kickstart,2nd heatbed version, fans check modified
|
2017-09-21 15:20:02 +02:00 |
|
thermistortables.h
|
Ambient thermistor - table and conversion function, extruder motor changed back to 200steps type, extruder resolution changed to 32usteps.
|
2017-09-06 16:04:50 +02:00 |
|
tmc2130.cpp
|
Sg load meassurement durring self test - 'Belt status'
|
2017-11-27 04:46:58 +01:00 |
|
tmc2130.h
|
Sg load meassurement durring self test - 'Belt status'
|
2017-11-27 04:46:58 +01:00 |
|
ultralcd_implementation_hitachi_HD44780.h
|
whitespace and minor corrections
|
2017-11-26 20:57:28 +01:00 |
|
ultralcd_st7920_u8glib_rrd.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
ultralcd.cpp
|
bugfix - Filament sensor enable from menu
|
2017-11-29 00:15:45 +01:00 |
|
ultralcd.h
|
timeout to status prolonged, no timeout allowed when MSG_WIZARD_RERUN
|
2017-11-23 15:46:10 +01:00 |
|
uni_avr_rpi.h
|
PAT9125 I2C, hardware SG homing
|
2017-08-17 15:23:34 +02:00 |
|
util.cpp
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
util.h
|
3.0.12-RC2 sync
|
2017-06-29 18:35:43 +02:00 |
|
vector_3.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
vector_3.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
watchdog.cpp
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
|
watchdog.h
|
3.0.6 sync
|
2016-08-11 10:42:53 +02:00 |
