| .. |
|
variants
|
Temperature model: update R0 estimate
|
2022-09-21 15:05:05 +02:00 |
|
adc.cpp
|
Decouple temperature ISR from ADC readings
|
2022-07-25 17:30:21 +02:00 |
|
adc.h
|
Decouple temperature ISR from ADC readings
|
2022-07-25 17:30:21 +02:00 |
|
asm.h
|
Simplify GETPC()
|
2022-02-02 21:06:58 +01:00 |
|
AutoDeplete.cpp
|
Comment.
|
2019-01-04 19:56:15 +01:00 |
|
AutoDeplete.h
|
Add filament auto deplete engine for multi-material prints with MMUv2.
|
2019-01-03 22:58:25 +01:00 |
|
backlight.cpp
|
Add newline at the end of file
|
2020-09-15 14:56:41 +02:00 |
|
backlight.h
|
General fixes and improvements to code
|
2019-10-31 19:07:20 +02:00 |
|
BlinkM.cpp
|
|
|
|
BlinkM.h
|
|
|
|
boards.h
|
|
|
|
bootapp.c
|
Remove unused/broken bootapp code
|
2021-03-03 16:31:30 +02:00 |
|
bootapp.h
|
Fix usage of RAMEND
|
2021-06-12 13:16:12 +02:00 |
|
cardreader.cpp
|
Fix MSG_ c=
|
2022-09-14 11:33:24 +02:00 |
|
cardreader.h
|
Reduce a few magic numbers for FILENAME_LENGTH
|
2022-08-26 19:26:26 +03:00 |
|
cmdqueue.cpp
|
Do not reset line on serial commands without N
|
2022-09-21 15:05:21 +02:00 |
|
cmdqueue.h
|
Do not reset line on serial commands without N
|
2022-09-21 15:05:21 +02:00 |
|
config.h
|
Set reserved space back after cherry-pick
|
2022-09-14 11:33:24 +02:00 |
|
Configuration_adv.h
|
Disable sorting speedtest
|
2022-07-04 18:06:54 +02:00 |
|
Configuration.cpp
|
some improvements
|
2019-07-10 16:29:40 +02:00 |
|
Configuration.h
|
Version changed (3.12.0-BETA1 build 5536)
|
2022-09-29 19:57:46 +02:00 |
|
ConfigurationStore.cpp
|
Allow to save/restore temperature model settings
|
2022-07-25 17:30:22 +02:00 |
|
ConfigurationStore.h
|
Don't include M851 in build if Auto Bed Leveling is not enabled
|
2022-08-26 15:35:28 +00:00 |
|
conv2str.cpp
|
ftostr12ns: change xx from long to int
|
2022-08-26 19:28:36 +03:00 |
|
conv2str.h
|
LCD menu optimalization - conversion functions - source separation
|
2018-07-16 17:23:35 +02:00 |
|
Dcodes.cpp
|
Merge pull request #3552 from wavexx/temp_model_check
|
2022-08-24 19:16:48 +02:00 |
|
Dcodes.h
|
Improve/fix D23 for M2.5/S printers
|
2021-06-25 08:46:55 +02:00 |
|
doxyfile
|
Updated doxygen docs to work better with confluence.
|
2019-07-19 13:51:55 +02:00 |
|
eeprom.cpp
|
remove firstrun
|
2022-02-04 13:27:43 +01:00 |
|
eeprom.h
|
Fix power panic handling
|
2022-08-24 20:19:26 +03:00 |
|
fancheck.cpp
|
Extract PRINTER_ACTIVE into a noinline function
|
2022-09-14 07:31:39 +02:00 |
|
fancheck.h
|
Simplify fan checks now that lcd pause works correctly
|
2022-07-25 17:30:22 +02:00 |
|
fastio.h
|
Change arduino IO to fastio where possible
|
2022-01-30 11:22:43 +00:00 |
|
Firmware.ino
|
LCD menu optimalization - LiquidCrystal_Prusa removed
|
2018-07-16 23:23:15 +02:00 |
|
first_lay_cal.cpp
|
Remove MSG_M117_V2_CALIBRATION
|
2022-09-14 11:33:24 +02:00 |
|
first_lay_cal.h
|
Rename lay1cal_preheat() to lay1cal_wait_preheat().
|
2019-09-12 00:19:20 +02:00 |
|
fsensor.cpp
|
Disable IR_SENSOR due to the injected ADC read for now
|
2022-07-25 17:30:21 +02:00 |
|
fsensor.h
|
MK3s IR sensor improvement (#2698)
|
2020-06-03 16:14:56 +02:00 |
|
heatbed_pwm.cpp
|
Remove unnecessary assignment
|
2021-06-21 06:47:59 +02:00 |
|
la10compat.cpp
|
Re-adjust LA10->15 conversion
|
2020-09-07 21:44:34 +02:00 |
|
la10compat.h
|
Adjust E-jerk in LA10 compatibility mode
|
2020-02-03 15:42:27 +01:00 |
|
language.c
|
Update config.h translation documentation and move language to group2
|
2022-09-14 11:33:24 +02:00 |
|
language.h
|
Update config.h translation documentation and move language to group2
|
2022-09-14 11:33:24 +02:00 |
|
lcd.cpp
|
lcd_print_pad: do not overflow len when truncating the string
|
2022-09-26 12:18:47 +02:00 |
|
lcd.h
|
Also consume longpress in lcd_consume_click()
|
2022-10-06 15:22:08 +02:00 |
|
le.sh
|
make all shell scripts executable
|
2018-12-10 07:09:03 -07:00 |
|
macros.h
|
Use timer3 instead of timer5 on miniRambo
|
2022-08-24 10:18:45 +03:00 |
|
Marlin_main.cpp
|
Rename EN_ONLY to EN_FARM
|
2022-09-29 17:47:05 +02:00 |
|
Marlin.h
|
Rename EN_ONLY to EN_FARM
|
2022-09-29 17:47:05 +02:00 |
|
MarlinSerial.cpp
|
Remove ancient SNMM code in the MK3 branch
|
2022-02-15 15:58:33 +01:00 |
|
MarlinSerial.h
|
Use timer3 instead of timer5 on miniRambo
|
2022-08-24 10:18:45 +03:00 |
|
menu.cpp
|
Generalize menu_block_entering_on_serious_errors for menu lockout
|
2022-07-25 17:30:22 +02:00 |
|
menu.h
|
Block LCD during temperature model autocalibration
|
2022-07-25 17:30:22 +02:00 |
|
mesh_bed_calibration.cpp
|
Fix MSG_ c=
|
2022-09-14 11:33:24 +02:00 |
|
mesh_bed_calibration.h
|
Optimise if-statments in world2machine_clamp
|
2022-02-01 18:37:41 +00:00 |
|
mesh_bed_leveling.cpp
|
Use memset instead of nested for-loop to zero a 2d array
|
2021-08-02 19:20:51 +00:00 |
|
mesh_bed_leveling.h
|
Remove undefined function
|
2022-01-30 11:39:29 +00:00 |
|
messages.cpp
|
Rename EN_ONLY to EN_FARM
|
2022-09-29 17:47:05 +02:00 |
|
messages.h
|
Rename EN_ONLY to EN_FARM
|
2022-09-29 17:47:05 +02:00 |
|
mmu.cpp
|
Split fan checks out of temperature.cpp
|
2022-07-18 17:53:27 +02:00 |
|
mmu.h
|
Merge pull request #3413 from leptun/MK3_fix_timer_polling
|
2022-02-17 09:00:13 +01:00 |
|
motion_control.cpp
|
Multi-segment pause resume initial
|
2022-08-24 20:19:26 +03:00 |
|
motion_control.h
|
Multi-segment pause resume initial
|
2022-08-24 20:19:26 +03:00 |
|
optiboot_xflash.cpp
|
Merge remote-tracking branch 'upstream/MK3_3.11.1' into mk311_sync
|
2022-07-04 16:14:23 +02:00 |
|
optiboot_xflash.h
|
Rename w25x20cl to xflash
|
2021-04-06 10:16:47 +02:00 |
|
pat9125.cpp
|
TWI timeout
|
2022-02-17 00:05:09 +01:00 |
|
pat9125.h
|
TWI timeout
|
2022-02-17 00:05:09 +01:00 |
|
pins_Einsy_1_0.h
|
Use timer3 instead of timer5 on miniRambo
|
2022-08-24 10:18:45 +03:00 |
|
pins_Rambo_1_0.h
|
Use timer3 instead of timer5 on miniRambo
|
2022-08-24 10:18:45 +03:00 |
|
pins_Rambo_1_3.h
|
Use timer3 instead of timer5 on miniRambo
|
2022-08-24 10:18:45 +03:00 |
|
pins.h
|
Move SDA/SCL pins into pins.h for fastio compatibility
|
2021-01-29 17:48:59 +01:00 |
|
planner.cpp
|
Remove unused variable maxlimit_status
|
2022-08-26 19:29:32 +03:00 |
|
planner.h
|
Multi-segment pause resume initial
|
2022-08-24 20:19:26 +03:00 |
|
printers.h
|
Remove commented out defines.
|
2019-07-10 17:40:33 +02:00 |
|
Prusa_farm.cpp
|
Move all farm configuration to header
|
2022-08-30 13:57:43 +02:00 |
|
Prusa_farm.h
|
Update build.sh and travis to build EN_ONLY
|
2022-08-30 13:57:43 +02:00 |
|
qr_solve.cpp
|
|
|
|
qr_solve.h
|
|
|
|
rbuf.c
|
T-codes for MMU_V2: initial version
|
2018-07-09 13:57:36 +02:00 |
|
rbuf.h
|
T-codes for MMU_V2: initial version
|
2018-07-09 13:57:36 +02:00 |
|
Sd2Card.cpp
|
Change arduino IO to fastio where possible
|
2022-01-30 11:22:43 +00:00 |
|
Sd2Card.h
|
Change return types of two functions uint8_t
|
2022-01-30 11:39:24 +00:00 |
|
SdBaseFile.cpp
|
Reduce a few magic numbers for FILENAME_LENGTH
|
2022-08-26 19:26:26 +03:00 |
|
SdBaseFile.h
|
Remove temporary changes from SdBaseFile.h
|
2021-01-28 09:42:50 +01:00 |
|
SdFatConfig.h
|
|
|
|
SdFatStructs.h
|
|
|
|
SdFatUtil.cpp
|
Introduce STACK_GUARD_MARGIN in all variants
|
2021-06-12 12:08:53 +02:00 |
|
SdFatUtil.h
|
Introduce STACK_GUARD_MARGIN in all variants
|
2021-06-12 12:08:53 +02:00 |
|
SdFile.cpp
|
SDFile - fix errorneous offset computation
|
2021-03-30 11:33:42 +02:00 |
|
SdFile.h
|
Remove commented debug code
|
2021-02-10 11:18:59 +01:00 |
|
SdInfo.h
|
|
|
|
SdVolume.cpp
|
|
|
|
SdVolume.h
|
Extract gcode filter from SdBaseFile into SdFile + optimization
|
2021-01-27 09:33:28 +01:00 |
|
Servo.cpp
|
change boolean to bool
|
2021-07-20 08:03:17 +02:00 |
|
Servo.h
|
|
|
|
sm4.c
|
Merge pull request #1263 from metacollin/calfix
|
2022-02-15 09:26:42 +01:00 |
|
sm4.h
|
Fix sm4.h line ending
|
2021-01-22 18:57:24 +02:00 |
|
sound.cpp
|
Fix misleading indentation warnings by expanding tabs
|
2021-06-21 06:52:52 +02:00 |
|
sound.h
|
Merge remote-tracking branch 'upstream/MK3' into rebase-testing-ground-v2
|
2022-01-30 11:43:16 +00:00 |
|
speed_lookuptable.cpp
|
Move speed lookup defs into a separate source
|
2019-05-24 17:08:32 +02:00 |
|
speed_lookuptable.h
|
Fix MUL24x24R24 comment
|
2022-02-09 00:26:46 +01:00 |
|
spi.c
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
|
spi.h
|
New ML support - W25X20CL external spi flash support
|
2018-06-08 00:20:28 +02:00 |
|
static_assert.h
|
static_assert - portable solution compatible with C++98
|
2018-09-27 19:59:29 +02:00 |
|
stepper.cpp
|
Make the diag pins open collector with pullup.
|
2022-09-14 07:39:47 +02:00 |
|
stepper.h
|
Pack endstop flags
|
2022-02-04 15:24:43 +01:00 |
|
stk500.h
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
|
swi2c.c
|
Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C
|
2021-01-29 18:28:55 +01:00 |
|
swi2c.h
|
SWI2C for PAT9125 simplified/optimized
|
2018-07-12 17:55:38 +02:00 |
|
swspi.cpp
|
|
|
|
swspi.h
|
|
|
|
system_timer.h
|
Move millis_nc to system_timer.h
|
2022-07-18 17:53:27 +02:00 |
|
temp_model.h
|
Implement temperature model autotuning
|
2022-07-25 17:30:22 +02:00 |
|
temperature.cpp
|
TM: Consume LCD click after calibration
|
2022-10-06 15:21:52 +02:00 |
|
temperature.h
|
TM: Allow to keep model checking enabled during autotuning
|
2022-09-02 15:59:29 +02:00 |
|
thermistortables.h
|
Implement MIN/MAX AMBIENT safety checks
|
2020-08-01 17:38:10 +02:00 |
|
timer02.c
|
split timer0 and timer2 initialization. Move timer2 init early
|
2021-01-31 17:18:32 +02:00 |
|
timer02.h
|
split timer0 and timer2 initialization. Move timer2 init early
|
2021-01-31 17:18:32 +02:00 |
|
Timer.cpp
|
Implement Timer::expired_cont()
|
2022-07-25 17:30:22 +02:00 |
|
Timer.h
|
Implement Timer::expired_cont()
|
2022-07-25 17:30:22 +02:00 |
|
TimerRemaining.h
|
Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2.
|
2019-01-28 19:29:31 +01:00 |
|
tmc2130.cpp
|
Make the diag pins open collector with pullup.
|
2022-09-14 07:39:47 +02:00 |
|
tmc2130.h
|
Scale extruder motor current linearly with speed. (#2813)
|
2021-04-23 16:06:28 +02:00 |
|
tone04.c
|
Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C
|
2021-01-29 18:28:55 +01:00 |
|
tone04.h
|
ALTFAN implementation (#2692)
|
2020-06-01 17:58:15 +02:00 |
|
twi.cpp
|
Make twi timer local to the wait function
|
2022-02-17 09:22:18 +01:00 |
|
twi.h
|
TWI timeout
|
2022-02-17 00:05:09 +01:00 |
|
uart2.c
|
Change printf_P without format arguments and NL to puts_P only
|
2021-01-22 18:56:05 +02:00 |
|
uart2.h
|
MMU - communication, check after start, code cleaning
|
2018-08-07 20:37:59 +02:00 |
|
ultralcd.cpp
|
Remove unneeded lcd_finishstatus()
|
2022-09-23 14:55:03 +02:00 |
|
ultralcd.h
|
Allow choice positioning. Balance Yes/No messages.
|
2022-09-14 07:30:57 +02:00 |
|
uni_avr_rpi.h
|
Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:""
|
2018-07-23 13:35:38 +02:00 |
|
util.cpp
|
Move farm mode to separate file
|
2022-08-30 13:57:43 +02:00 |
|
util.h
|
Do *not* shorten the current command in printer_smodel_check
|
2022-08-06 23:15:46 +02:00 |
|
vector_3.cpp
|
|
|
|
vector_3.h
|
|
|
|
xflash_dump.cpp
|
Simplify GETPC()
|
2022-02-02 21:06:58 +01:00 |
|
xflash_dump.h
|
Crash if pullups get enabled on the thermistor inputs
|
2022-02-01 12:34:07 +01:00 |
|
xflash_layout.h
|
Make layout static regardless of what is enabled
|
2022-02-17 09:34:09 +01:00 |
|
xflash.c
|
xflash: add xflash_multipage_program and documentation
|
2021-06-08 15:25:16 +02:00 |
|
xflash.h
|
xflash: add xflash_multipage_program and documentation
|
2021-06-08 15:25:16 +02:00 |
|
xyzcal.cpp
|
Resync planner position upon exiting xyzcal
|
2022-08-23 17:25:24 +02:00 |
|
xyzcal.h
|
Calibration: detect biased PINDA and retry calibration
|
2021-03-12 05:04:49 +01:00 |
