3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c31109c750
Prusa-Firmware/Firmware
History
Yuri D'Elia c31109c750 Implement MENU_DUMP: offline memory dump from "Support" 
If MENU_DUMP is enabled, a new entry at the end of the "Support" menu is
added that allows to dump memory for offline use.

This allows to trigger a memory dump at any moment during regular usage
(either idling or printing) and to recover the dump later even after a
hardware reset.
2021-06-08 16:56:58 +02:00
..
variants Scale extruder motor current linearly with speed. (#2813) 2021-04-23 16:06:28 +02:00
adc.c Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
adc.h
AutoDeplete.cpp
AutoDeplete.h
backlight.cpp Add newline at the end of file 2020-09-15 14:56:41 +02:00
backlight.h General fixes and improvements to code 2019-10-31 19:07:20 +02:00
BlinkM.cpp
BlinkM.h
boards.h
bootapp.c Remove unused/broken bootapp code 2021-03-03 16:31:30 +02:00
bootapp.h Remove unused/broken bootapp code 2021-03-03 16:31:30 +02:00
cardreader.cpp Save 16 bytes - pass ls_param by value to functions 2021-04-20 06:50:37 +02:00
cardreader.h Save 16 bytes - pass ls_param by value to functions 2021-04-20 06:50:37 +02:00
cmdqueue.cpp Fix Crash/PP recovery position on instructions with comments 2021-04-19 06:30:37 +02:00
cmdqueue.h Remove duplicate function is_buffer_empty() 2021-02-19 17:06:00 +01:00
config.h Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
Configuration_adv.h Add def M120_M121_ENABLED to Configuration_adv.h 2021-03-11 15:00:49 +01:00
Configuration.cpp some improvements 2019-07-10 16:29:40 +02:00
Configuration.h Version changed (3.10.0 build 4481) 2021-05-06 13:46:05 +02:00
ConfigurationStore.cpp Report travel acceleration in M503 2021-02-03 11:20:28 +01:00
ConfigurationStore.h Implement separate travel acceleration (M204 T) 2021-02-03 11:20:28 +01:00
conv2str.cpp
conv2str.h
Dcodes.cpp Dcodes: add D20/D21/D22 to generate/read/clear dumps 2021-06-08 15:34:39 +02:00
Dcodes.h Dcodes: add D20/D21/D22 to generate/read/clear dumps 2021-06-08 15:34:39 +02:00
doxyfile Updated doxygen docs to work better with confluence. 2019-07-19 13:51:55 +02:00
eeprom.cpp Merge pull request #3055 from awenelo/add-satin-sheet 2021-04-22 07:13:32 +02:00
eeprom.h Implement EMERGENCY_DUMP for offline analysis 2021-06-08 16:42:43 +02:00
fastio.h Remove the extra copy of CRITICAL_SECTION from fastio 2021-01-29 18:30:16 +01:00
Firmware.ino
first_lay_cal.cpp Gracefully dump the queue + fixes to fancheck 2020-11-09 21:49:56 +02:00
first_lay_cal.h Rename lay1cal_preheat() to lay1cal_wait_preheat(). 2019-09-12 00:19:20 +02:00
fsensor.cpp Silence bUpdateEEPROM unused warning in MK3 variant 2021-02-01 07:09:44 +01:00
fsensor.h MK3s IR sensor improvement (#2698) 2020-06-03 16:14:56 +02:00
heatbed_pwm.cpp Remove io_atmega2560.h and some more macros 2020-09-11 17:43:38 +03:00
la10compat.cpp Re-adjust LA10->15 conversion 2020-09-07 21:44:34 +02:00
la10compat.h Adjust E-jerk in LA10 compatibility mode 2020-02-03 15:42:27 +01:00
language.c Introduce "xflash_layout" to organize XFLASH's content 2021-06-08 15:22:37 +02:00
language.h Remove "Firmware" from translations 2021-04-28 18:02:36 +02:00
lcd.cpp Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2021-02-03 18:28:18 +02:00
lcd.h Merge branch 'MK3' into MK3_NEW_SD_COMPILATION 2021-02-03 18:28:18 +02:00
le.sh
macros.h More macros 2020-09-11 18:48:44 +03:00
Marlin_main.cpp Implement EMERGENCY_DUMP for offline analysis 2021-06-08 16:42:43 +02:00
Marlin.h Attempt to workaround the M73 C0|D0 visual issue (#3067) 2021-03-19 10:18:28 +01:00
MarlinSerial.cpp Merge pull request #2982 from DRracer/codesize 2021-01-26 12:04:39 +01:00
MarlinSerial.h More than 7.5KB saved by slight refactoring of printing to serial line 2019-07-12 10:10:56 +02:00
menu.cpp Limit progressbar to LCD_WIDTH 2021-02-26 09:18:28 +02:00
menu.h Cardreader progressbar code 2021-02-25 20:25:32 +02:00
mesh_bed_calibration.cpp Changed x of 4 and y of 9 to x/4 and y/4 2021-04-27 20:22:28 +02:00
mesh_bed_calibration.h Calibration: detect biased PINDA and retry calibration 2021-03-12 05:04:49 +01:00
mesh_bed_leveling.cpp
mesh_bed_leveling.h
messages.c Remove SpoolJoin from translations 2021-04-29 08:15:24 +02:00
messages.h Changed x of 4 and y of 9 to x/4 and y/4 2021-04-27 20:22:28 +02:00
mmu.cpp Remove white spaces in messags which saves ~62bytes 2021-04-26 07:22:22 +02:00
mmu.h Show FINDA state as N/A if last received response is older than 1s. 2019-10-31 17:45:22 +01:00
motion_control.cpp
motion_control.h
optiboot_xflash.cpp Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
optiboot_xflash.h Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
pat9125.c Fix probing in IR_SENSOR 2020-09-28 21:02:06 +02:00
pat9125.h Isolate more pat9125 code 2020-08-20 15:34:46 +02:00
pins_Einsy_1_0.h Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
pins_Rambo_1_0.h
pins_Rambo_1_3.h Still use SWI2C on RAMBo10a boards 2020-09-27 14:29:07 +02:00
pins.h Move SDA/SCL pins into pins.h for fastio compatibility 2021-01-29 17:48:59 +01:00
planner.cpp Implement separate travel acceleration (M204 T) 2021-02-03 11:20:28 +01:00
planner.h Also convert acceleration_rate to uint32_t 2020-08-03 19:01:38 +02:00
printers.h Remove commented out defines. 2019-07-10 17:40:33 +02:00
qr_solve.cpp
qr_solve.h
rbuf.c
rbuf.h
Sd2Card.cpp Update reference URL 2020-03-15 19:04:02 +09:00
Sd2Card.h Fix for Toshiba FlashAir (or other) SD card initialization - add clock cycles between sending CMD0 and CMD8. Redone for MK3 branch) 2019-08-08 15:45:59 -04:00
Sd2PinMap.h Move SDA/SCL pins into pins.h for fastio compatibility 2021-01-29 17:48:59 +01:00
SdBaseFile.cpp Return SdBaseFile into previous state 2021-01-28 09:41:30 +01:00
SdBaseFile.h Remove temporary changes from SdBaseFile.h 2021-01-28 09:42:50 +01:00
SdFatConfig.h
SdFatStructs.h
SdFatUtil.cpp
SdFatUtil.h
SdFile.cpp SDFile - fix errorneous offset computation 2021-03-30 11:33:42 +02:00
SdFile.h Remove commented debug code 2021-02-10 11:18:59 +01:00
SdInfo.h
SdVolume.cpp
SdVolume.h Extract gcode filter from SdBaseFile into SdFile + optimization 2021-01-27 09:33:28 +01:00
Servo.cpp
Servo.h
sm4.c Merge pull request #2789 from wavexx/MK3_TMC2130_DEDGE 2021-01-29 11:13:09 +01:00
sm4.h Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
sound.cpp General fixes and improvements to code 2019-10-31 19:07:20 +02:00
sound.h Toggle Sound 2019-08-31 16:56:14 +03:00
speed_lookuptable.cpp Move speed lookup defs into a separate source 2019-05-24 17:08:32 +02:00
speed_lookuptable.h Add reference C implementations for MultiU16X8toH16/MultiU24X24toH16 2020-08-03 19:03:13 +02:00
spi.c
spi.h
static_assert.h
stepper.cpp Scale extruder motor current linearly with speed. (#2813) 2021-04-23 16:06:28 +02:00
stepper.h Move reset LA state from G80 to M84 2020-04-29 22:51:23 +02:00
stk500.h
swi2c.c Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C 2021-01-29 18:28:55 +01:00
swi2c.h
swspi.cpp
swspi.h
system_timer.h ALTFAN implementation (#2692) 2020-06-01 17:58:15 +02:00
temperature.cpp Insert babysteps using CRITICAL_SECTION instead of cli/sei 2021-02-25 16:44:16 +01:00
temperature.h Remove code duplication for babystep insertion 2021-02-25 16:44:16 +01:00
thermistortables.h Implement MIN/MAX AMBIENT safety checks 2020-08-01 17:38:10 +02:00
timer02.c split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
timer02.h split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
Timer.cpp
Timer.h Code refactoring 2021-01-20 11:46:25 +01:00
TimerRemaining.h
tmc2130.cpp Scale extruder motor current linearly with speed. (#2813) 2021-04-23 16:06:28 +02:00
tmc2130.h Scale extruder motor current linearly with speed. (#2813) 2021-04-23 16:06:28 +02:00
tone04.c Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C 2021-01-29 18:28:55 +01:00
tone04.h ALTFAN implementation (#2692) 2020-06-01 17:58:15 +02:00
twi.c Switch twi.c to fastio 2021-01-29 17:51:38 +01:00
twi.h Be more compliant in the I2C protocol 2020-09-28 20:21:07 +02:00
uart2.c Change printf_P without format arguments and NL to puts_P only 2021-01-22 18:56:05 +02:00
uart2.h
ultralcd.cpp Implement MENU_DUMP: offline memory dump from "Support" 2021-06-08 16:56:58 +02:00
ultralcd.h Scale extruder motor current linearly with speed. (#2813) 2021-04-23 16:06:28 +02:00
uni_avr_rpi.h
util.cpp Define #MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5, #MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9 2021-03-31 07:41:21 +02:00
util.h M552 - Printer IP address 2021-02-02 13:21:16 +02:00
vector_3.cpp
vector_3.h
xflash_dump.cpp xfdump: implement dump-to-xflash functionality 2021-06-08 15:28:02 +02:00
xflash_dump.h xfdump: implement dump-to-xflash functionality 2021-06-08 15:28:02 +02:00
xflash_layout.h xfdump: implement dump-to-xflash functionality 2021-06-08 15:28:02 +02:00
xflash.c xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xflash.h xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xyzcal.cpp Calibration: fix checking of scan of calibration points 2021-04-14 06:25:18 +02:00
xyzcal.h Calibration: detect biased PINDA and retry calibration 2021-03-12 05:04:49 +01:00