3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
Prusa-Firmware/Firmware
History
bubnikv dd2468d306 Avoid the stepper interrupt being missed by extending the tick time 
beyond the current time. This is a trick borrwed from upstream Marlin.

In debug mode, watch for the missed stepper interrupt ticks where the interrupts
are missed by more than 20% of the 10kHz stepper interrupt repeat rate,
and show the statistics (number of missed ticks and by how many micro
seconds was the interrupt missed, and what was the maximum missed
interrupt delay) on the display and send it to the serial line.
2018-02-15 11:44:19 +01:00
..
variants Removed SG software homming 2017-12-15 14:10:20 +01:00
adc.c Removed debug messages from serial comunication (octoprint...). 2017-12-27 20:29:24 +01:00
adc.h new module adc (analog2digital) 2017-12-20 13:42:20 +01:00
BlinkM.cpp Build 109 2017-11-16 22:03:36 +01:00
BlinkM.h Build 109 2017-11-16 22:03:36 +01:00
boards.h EINY -> EINSY 2017-11-27 18:47:48 +01:00
cardreader.cpp cardreader - new member "paused" 2018-01-31 15:20:27 +01:00
cardreader.h cardreader - new member "paused" 2018-01-31 15:20:27 +01:00
cmdqueue.cpp Documented the interrupt blocking by a main thread by its maximum time. 2018-01-20 14:58:30 +01:00
cmdqueue.h Minimize risk of stepper routine interrupt blocking by reorganizing 2018-01-20 14:37:22 +01:00
config.h new module adc (analog2digital) 2017-12-20 13:42:20 +01:00
Configuration.h version changed 2018-02-02 17:48:02 +01:00
Configuration_adv.h Enabled linear advance. 2018-02-02 22:56:13 +01:00
Configuration_prusa.h Adjusted the features for the debug buid: 2018-02-02 20:37:03 +01:00
ConfigurationStore.cpp Inform user that hardcoded default settings were loaded (EEPROM version change) 2018-01-30 11:31:44 +01:00
ConfigurationStore.h Inform user that hardcoded default settings were loaded (EEPROM version change) 2018-01-30 11:31:44 +01:00
Dcodes.cpp New fail stats (global, last print), crashdetection X and Y separated 2018-01-30 13:10:36 +01:00
Dcodes.h new module adc (analog2digital) 2017-12-20 13:42:20 +01:00
digipot_mcp4451.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
dogm_font_data_marlin.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
dogm_lcd_implementation.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
DOGMbitmaps.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
fastio.h WRITE_NC macro for non-critical (non-synchronized) access to 2018-01-12 20:15:59 +01:00
Firmware.ino opravene nezadouci resetovani watchdogem 2017-11-27 14:43:56 +01:00
Firmware.ino.rambo.hex build 143e 2018-01-04 18:08:22 +01:00
Firmware.sublime-project 3.0.6 sync 2016-08-11 10:42:53 +02:00
fsensor.cpp filament sensor additional check after runout (3mm back, 3mm forward @200mm/min) 2018-01-31 21:10:41 +01:00
fsensor.h Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update 2017-12-20 13:33:45 +01:00
langtool.php 3.0.6 sync 2016-08-11 10:42:53 +02:00
langtool.pl merging from dev/MK3 2017-12-02 21:56:39 +01:00
language.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
language_all.cpp Merge pull request #440 from XPila/3.1.1-RC6 2018-01-31 20:21:02 +01:00
language_all.h Merge pull request #440 from XPila/3.1.1-RC6 2018-01-31 20:21:02 +01:00
language_common.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
language_cz.h Inform user that hardcoded default settings were loaded (EEPROM version change) 2018-01-30 11:31:44 +01:00
language_de.h basic language corrections 2017-11-21 14:44:07 +01:00
language_en.h PINDA temp. calibration warning messages. 2018-01-31 17:03:33 +01:00
language_es.h basic language corrections 2017-11-21 14:44:07 +01:00
language_it.h basic language corrections 2017-11-21 14:44:07 +01:00
language_pl.h basic language corrections 2017-11-21 14:44:07 +01:00
le.sh 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
LiquidCrystal.cpp Print class printf function (experimental, disabled by default) 2017-11-20 20:09:54 +01:00
LiquidCrystal.h Print class printf function (experimental, disabled by default) 2017-11-20 20:09:54 +01:00
Marlin.h Missed a bit with the last commit. 2018-01-12 22:01:53 +01:00
Marlin_main.cpp bugfix - failstats (total counters) reset to zero for empty eeprom (0xff) 2018-02-02 15:59:37 +01:00
MarlinSerial.cpp Optimized the MarlinSerial class by declaring all methods static. 2018-02-02 20:25:19 +01:00
MarlinSerial.h Optimized the MarlinSerial class by declaring all methods static. 2018-02-02 20:25:19 +01:00
mesh_bed_calibration.cpp Removed debug messages from serial comunication (octoprint...). 2017-12-27 20:29:24 +01:00
mesh_bed_calibration.h Fixed homing (mbl and babystep - crashdetection recovery work fine now). 2017-09-23 16:35:01 +02:00
mesh_bed_leveling.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
mesh_bed_leveling.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
motion_control.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
motion_control.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
pat9125.cpp Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
pat9125.h Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
pins.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
pins_Einy_0_3.h PINDA thermistor and ambient thermistor. 2017-09-05 14:02:35 +02:00
pins_Einy_0_4.h Added macros for outputting serial data onto the logical analyzer line 2018-02-02 20:42:09 +01:00
pins_Rambo.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
pins_Rambo_1_0.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
pins_Rambo_1_3.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
planner.cpp Merge branch 'MK3' into MK3_fast_dbg 2018-02-02 20:51:57 +01:00
planner.h Split the stepper ISR routine into multiple inline functions, 2018-01-14 22:37:07 +01:00
qr_solve.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
qr_solve.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
Sd2Card.cpp 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
Sd2Card.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
Sd2PinMap.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdBaseFile.cpp first working version 2017-11-27 06:20:51 +01:00
SdBaseFile.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFatConfig.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdFatStructs.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdFatUtil.cpp 3.0.10 sync 2017-03-24 19:47:50 +01:00
SdFatUtil.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFile.cpp 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFile.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdInfo.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdVolume.cpp 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdVolume.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
Servo.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
Servo.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
speed_lookuptable.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
stepper.cpp Avoid the stepper interrupt being missed by extending the tick time 2018-02-15 11:44:19 +01:00
stepper.h Merge remote-tracking branch 'remotes/origin/MK3_stepper_blocking' into MK3_fast_dbg 2018-01-20 17:31:26 +01:00
swi2c.cpp PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
swi2c.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
swspi.cpp PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
swspi.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
temperature.cpp PID cal. is not sending OK periodically, print fan error pauses print in octoprint (not disconnecting), initialize serial line when swithing in settings menu 2018-01-25 15:23:11 +01:00
temperature.h MINTEMP fix 2017-12-23 03:36:08 +01:00
thermistortables.h new ambient thermistor table 2017-12-12 22:49:47 +01:00
tmc2130.cpp cardreader - new member "paused" 2018-01-31 15:20:27 +01:00
tmc2130.h New fail stats (global, last print), crashdetection X and Y separated 2018-01-30 13:10:36 +01:00
ultralcd.cpp Avoid the stepper interrupt being missed by extending the tick time 2018-02-15 11:44:19 +01:00
ultralcd.h M600 has timeout for nozzle, different procedure for unload 2018-01-15 11:30:28 +01:00
ultralcd_implementation_hitachi_HD44780.h Support for debug builds: 2018-01-18 16:24:25 +01:00
ultralcd_st7920_u8glib_rrd.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
uni_avr_rpi.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
util.cpp fw version check: FW_VERSION string is case insensitive (parsing RC works) 2018-02-01 20:23:45 +01:00
util.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
vector_3.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
vector_3.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
watchdog.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
watchdog.h 3.0.6 sync 2016-08-11 10:42:53 +02:00