PrusaSlicer-NonPlainar/resources/profiles/PrusaResearch.idx

min_slic3r_version = 1.42.0-alpha6
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
0.8.0-rc1 Updated SLA profiles
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
0.8.0-beta4 Updated SLA profiles
0.8.0-beta3 Updated SLA profiles
0.8.0-beta2 Updated SLA profiles
0.8.0-beta1 Updated SLA profiles
0.8.0-beta Updated SLA profiles
0.8.0-alpha9 Updated SLA and FFF profiles
0.8.0-alpha8 Updated SLA profiles
0.8.0-alpha7 Updated SLA profiles
0.8.0-alpha6 Updated SLA profiles
min_slic3r_version = 1.42.0-alpha
0.8.0-alpha Updated SLA profiles
0.4.0-alpha4 Updated SLA profiles
0.4.0-alpha3 Update of SLA profiles
0.4.0-alpha2 First SLA profiles
min_slic3r_version = 1.41.3-alpha
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
0.4.5 Enabled remaining time support for MK2/S/MMU1
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
0.4.1 New MK2.5S and MK3S FW versions
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
min_slic3r_version = 1.41.1
0.3.6 Updated firmware versions for MK2.5 and MK3
0.3.5 New MK2.5 and MK3 FW versions
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt 
0.3.3 Prusament PETG released
0.3.2 New MK2.5 and MK3 FW versions
0.3.1 New MK2.5 and MK3 FW versions
0.3.0 New MK2.5 and MK3 FW version
min_slic3r_version = 1.41.0-alpha
0.2.9 New MK2.5 and MK3 FW versions
0.2.8 New MK2.5 and MK3 FW version
min_slic3r_version = 1.41.1
0.2.7 New MK2.5 and MK3 FW version
0.2.6 Added MMU2 MK2.5 settings
min_slic3r_version = 1.41.0-alpha
0.2.5 Prusament is out - added prusament settings
0.2.4 Added soluble support profiles for MMU2
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
0.2.2 Edited MMU2 Single mode purge line
0.2.1 Added PET and BVOH settings for MMU2
0.2.0-beta5 Fixed MMU1 ramming parameters
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
0.2.0-beta2 Edited first layer speed and wipe tower position
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
min_slic3r_version = 1.40.0
0.1.14 Updated firmware versions for MK2.5 and MK3
0.1.13 New MK2.5 and MK3 FW versions
0.1.12 New MK2.5 and MK3 FW versions
0.1.11 fw version changed to 3.3.1
0.1.10 MK3 jerk and acceleration update
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
0.1.6 Split the MK2.5 profile from the MK2S
min_slic3r_version = 1.40.0-beta
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
0.1.4 edited fw version, added z-raise after print
min_slic3r_version = 1.40.0-alpha
0.1.3 Fixed an incorrect position of the max_print_height parameter
0.1.2 Wipe tower changes
0.1.1 Minor print speed adjustments
0.1.0 Initial
Update profiles 2019-02-14 17:24:22 +00:00			`min_slic3r_version = 1.42.0-alpha6`
Updated profiles for the final release. 2019-05-20 14:25:51 +00:00			`0.8.0 Updated for the PrusaSlicer 2.0.0 final release`
Updated PrusaResearch profiles 2019-05-17 14:31:40 +00:00			`0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S`
			`0.8.0-rc1 Updated SLA profiles`
Bumped up slicer version, updated bundled profiles 2019-05-14 17:06:52 +00:00			`0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release`
Updated profiles. 2019-05-14 16:16:04 +00:00			`0.8.0-beta4 Updated SLA profiles`
			`0.8.0-beta3 Updated SLA profiles`
			`0.8.0-beta2 Updated SLA profiles`
			`0.8.0-beta1 Updated SLA profiles`
Updated Prusa3D print profiles 2019-03-16 18:13:30 +00:00			`0.8.0-beta Updated SLA profiles`
			`0.8.0-alpha9 Updated SLA and FFF profiles`
			`0.8.0-alpha8 Updated SLA profiles`
			`0.8.0-alpha7 Updated SLA profiles`
			`0.8.0-alpha6 Updated SLA profiles`
WIP: SL1 profiles, SL1 in wizard, switching between FFF / SLA 2018-10-31 15:22:36 +00:00			`min_slic3r_version = 1.42.0-alpha`
Updated Prusa3D print profiles 2019-03-16 18:13:30 +00:00			`0.8.0-alpha Updated SLA profiles`
Updated profiles 2019-02-04 18:10:47 +00:00			`0.4.0-alpha4 Updated SLA profiles`
Updated SLA profiles. Fixed the update downloader to ignore downloaded preset index if it is older than the currently active one. 2018-12-20 16:44:24 +00:00			`0.4.0-alpha3 Update of SLA profiles`
WIP: SL1 profiles, SL1 in wizard, switching between FFF / SLA 2018-10-31 15:22:36 +00:00			`0.4.0-alpha2 First SLA profiles`
Update profiles 2019-02-14 17:24:22 +00:00			`min_slic3r_version = 1.41.3-alpha`
Updated PrusaResearch profiles 2019-05-17 14:31:40 +00:00			`0.4.6 Updated firmware versions for MK2.5/S and MK3/S`
Updated profiles. 2019-05-14 16:16:04 +00:00			`0.4.5 Enabled remaining time support for MK2/S/MMU1`
Updated Prusa3D print profiles 2019-03-16 18:13:30 +00:00			`0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt`
			`0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt`
			`0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt`
			`0.4.1 New MK2.5S and MK3S FW versions`
Update profiles 2019-02-14 17:24:22 +00:00			`0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt`
Updated SLA profiles. Fixed the update downloader to ignore downloaded preset index if it is older than the currently active one. 2018-12-20 16:44:24 +00:00			`min_slic3r_version = 1.41.1`
Updated PrusaResearch profiles 2019-05-17 14:31:40 +00:00			`0.3.6 Updated firmware versions for MK2.5 and MK3`
Updated Prusa3D print profiles 2019-03-16 18:13:30 +00:00			`0.3.5 New MK2.5 and MK3 FW versions`
Update profiles 2019-02-14 17:24:22 +00:00			`0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt`
Updated SLA profiles. Fixed the update downloader to ignore downloaded preset index if it is older than the currently active one. 2018-12-20 16:44:24 +00:00			`0.3.3 Prusament PETG released`
			`0.3.2 New MK2.5 and MK3 FW versions`
			`0.3.1 New MK2.5 and MK3 FW versions`
			`0.3.0 New MK2.5 and MK3 FW version`
Bundled newer versions of PrusaResearch profiles. 2018-09-01 07:54:02 +00:00			`min_slic3r_version = 1.41.0-alpha`
Updated SLA profiles. Fixed the update downloader to ignore downloaded preset index if it is older than the currently active one. 2018-12-20 16:44:24 +00:00			`0.2.9 New MK2.5 and MK3 FW versions`
			`0.2.8 New MK2.5 and MK3 FW version`
			`min_slic3r_version = 1.41.1`
			`0.2.7 New MK2.5 and MK3 FW version`
			`0.2.6 Added MMU2 MK2.5 settings`
			`min_slic3r_version = 1.41.0-alpha`
			`0.2.5 Prusament is out - added prusament settings`
			`0.2.4 Added soluble support profiles for MMU2`
			`0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit`
Bundled newer versions of PrusaResearch profiles. 2018-09-01 07:54:02 +00:00			`0.2.2 Edited MMU2 Single mode purge line`
Bumped up the version number to 1.41.0 release, bundled updated PrusaResearch configs. 2018-08-30 14:08:25 +00:00			`0.2.1 Added PET and BVOH settings for MMU2`
			`0.2.0-beta5 Fixed MMU1 ramming parameters`
			`0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower`
			`0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2`
			`0.2.0-beta2 Edited first layer speed and wipe tower position`
Updated MK3MM2 presets, updated start G-codes of the MK2 printer as it does not support the new M204 format. 2018-08-06 16:04:35 +00:00			`0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles`
T1 and M702 C are now evaluated by the time estimator to add the new "filament_load_time" and "filament_unload_time" values to match the MK3 MMU2 behavior. Emitting of the remaining times into the output G-code was made optional through a new "remaining_times" configuration value, so the firmware flavors and versions, which do not know the M73 code, will not complain. Configuration changes: The wipe tower default position was shifted inwards after the wipe tower coordinate reference point was changed from the center to the left front corner. Added the "filament_load_time" and "filament_unload_time" values to the MK3 MMU filament profiles. Enabled "remaining_times" for the MK2.5, MK3 and MK3MMU2 printers. 2018-08-04 15:38:25 +00:00			`0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.`
Bumped up the version number to 1.41.0 release, bundled updated PrusaResearch configs. 2018-08-30 14:08:25 +00:00			`0.2.0-alpha7 Vojtech's fix the incorrect MK3 references`
			`0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version`
Configuration improvements: Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2 2018-08-02 07:11:11 +00:00			`0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2`
Added the alpha4 config to the index. 2018-07-27 21:28:59 +00:00			`0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.`
			`0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost`
PrusaResearch.idx: Comment 0.2.0-alpha2 2018-07-24 13:53:17 +00:00			`0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material`
Sync PrusaResearch.idx 2018-07-24 13:47:13 +00:00			`0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0`
			`0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters`
Updated slic3r_min_version in prusa3d config version index. 2018-06-12 09:46:15 +00:00			`min_slic3r_version = 1.40.0`
Updated PrusaResearch profiles 2019-05-17 14:31:40 +00:00			`0.1.14 Updated firmware versions for MK2.5 and MK3`
Updated Prusa3D print profiles 2019-03-16 18:13:30 +00:00			`0.1.13 New MK2.5 and MK3 FW versions`
Update profiles 2019-02-14 17:24:22 +00:00			`0.1.12 New MK2.5 and MK3 FW versions`
Sync PrusaResearch.idx 2018-07-24 13:47:13 +00:00			`0.1.11 fw version changed to 3.3.1`
			`0.1.10 MK3 jerk and acceleration update`
			`0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles`
			`0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes`
			`0.1.7 Fixed errors in 0.25mm and 0.6mm profiles`
Split the MK2.5 profile from the MK2S 2018-06-11 16:20:29 +00:00			`0.1.6 Split the MK2.5 profile from the MK2S`
Updated slic3r_min_version in prusa3d config version index. 2018-06-12 09:46:15 +00:00			`min_slic3r_version = 1.40.0-beta`
Fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles. 2018-06-05 08:11:28 +00:00			`0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles`
Added Prusa profiles from https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch 2018-06-04 13:58:44 +00:00			`0.1.4 edited fw version, added z-raise after print`
Updated slic3r_min_version in prusa3d config version index. 2018-06-12 09:46:15 +00:00			`min_slic3r_version = 1.40.0-alpha`
Bumped up version numbers of the PrusaResearch.ini and the Slic3r itself. 2018-05-22 13:18:38 +00:00			`0.1.3 Fixed an incorrect position of the max_print_height parameter`
Updated PrusaResearch.ini with the latest version from Slic3r-settings repository 2018-05-11 13:41:26 +00:00			`0.1.2 Wipe tower changes`
			`0.1.1 Minor print speed adjustments`
Updated profiles for the final release. 2019-05-20 14:25:51 +00:00			`0.1.0 Initial`