Sync with PrusaSlicer-settings.
This commit is contained in:
rtyr
GitHub
parent
934d51d26f
commit
0219709d1f
@ -1,4 +1,5 @@
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.0.2 Removed obsolete host keys
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
0.0.1 Initial version
|
||||
min_slic3r_version = 2.3.0-beta2
|
||||
0.1.0 General rework. Added new print and filament profiles.
|
||||
0.0.2 Removed obsolete host keys
|
||||
min_slic3r_version = 2.2.0-alpha3
|
||||
0.0.1 Initial version
|
||||
|
||||
@ -1,9 +1,10 @@
|
||||
# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC
|
||||
# LulzBot profiles
|
||||
# Based on community profiles and original profiles from Cura LulzBot Edition.
|
||||
|
||||
[vendor]
|
||||
# Vendor name will be shown by the Config Wizard.
|
||||
name = LulzBot
|
||||
config_version = 0.0.2
|
||||
config_version = 0.1.0
|
||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
|
||||
|
||||
[printer_model:MINI_AERO]
|
||||
@ -12,18 +13,26 @@ variants = 0.5
|
||||
technology = FFF
|
||||
#bed_model = mini_bed.stl
|
||||
#bed_texture = mini.svg
|
||||
default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
|
||||
default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
|
||||
|
||||
[printer_model:TAZ6_AERO]
|
||||
name = Taz6 Aero
|
||||
variants = 0.5
|
||||
technology = FFF
|
||||
default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
|
||||
default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
|
||||
|
||||
[print:0.3mm @lulzbot]
|
||||
# [printer_model:TAZ_WORKHORSE]
|
||||
# name = Taz Workhorse
|
||||
# variants = 0.5
|
||||
# technology = FFF
|
||||
# default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
|
||||
|
||||
[print:*common*]
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_fill_pattern = monotonic
|
||||
top_fill_pattern = monotonic
|
||||
bottom_solid_layers = 3
|
||||
top_solid_layers = 4
|
||||
bridge_acceleration = 500
|
||||
bridge_angle = 0
|
||||
bridge_flow_ratio = 1
|
||||
@ -34,26 +43,24 @@ compatible_printers =
|
||||
compatible_printers_condition =
|
||||
complete_objects = 0
|
||||
default_acceleration = 500
|
||||
dont_support_bridges = 1
|
||||
dont_support_bridges = 0
|
||||
elefant_foot_compensation = 0
|
||||
ensure_vertical_shell_thickness = 0
|
||||
ensure_vertical_shell_thickness = 1
|
||||
extra_perimeters = 0
|
||||
external_perimeter_extrusion_width = 0.56
|
||||
external_perimeter_speed = 50%
|
||||
external_perimeter_speed = 35
|
||||
external_perimeters_first = 0
|
||||
extra_perimeters = 1
|
||||
extruder_clearance_height = 20
|
||||
extruder_clearance_radius = 20
|
||||
extrusion_width = 0.56
|
||||
fill_angle = 45
|
||||
fill_density = 20%
|
||||
fill_pattern = gyroid
|
||||
fill_pattern = grid
|
||||
first_layer_acceleration = 500
|
||||
first_layer_extrusion_width = 0.6
|
||||
first_layer_height = 100%
|
||||
first_layer_speed = 40%
|
||||
first_layer_height = 0.3
|
||||
first_layer_speed = 15
|
||||
gap_fill_speed = 20
|
||||
gcode_comments = 0
|
||||
gcode_label_objects = 0
|
||||
infill_anchor = 1
|
||||
infill_anchor_max = 20
|
||||
infill_acceleration = 500
|
||||
infill_every_layers = 1
|
||||
infill_extruder = 1
|
||||
@ -62,33 +69,31 @@ infill_first = 0
|
||||
infill_only_where_needed = 0
|
||||
infill_overlap = 25%
|
||||
infill_speed = 60
|
||||
inherits =
|
||||
interface_shells = 0
|
||||
layer_height = 0.3
|
||||
layer_height = 0.25
|
||||
max_print_speed = 80
|
||||
max_volumetric_speed = 0
|
||||
min_skirt_length = 0
|
||||
notes =
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
only_retract_when_crossing_perimeters = 0
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 500
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0.56
|
||||
perimeter_speed = 60
|
||||
perimeter_speed = 45
|
||||
perimeters = 3
|
||||
post_process =
|
||||
raft_layers = 0
|
||||
raft_first_layer_density = 70
|
||||
resolution = 0
|
||||
seam_position = nearest
|
||||
seam_position = aligned
|
||||
single_extruder_multi_material_priming = 1
|
||||
skirt_distance = 3
|
||||
skirt_height = 1
|
||||
skirts = 3
|
||||
slice_closing_radius = 0.049
|
||||
small_perimeter_speed = 15
|
||||
solid_infill_below_area = 70
|
||||
small_perimeter_speed = 22
|
||||
solid_infill_below_area = 0
|
||||
solid_infill_every_layers = 0
|
||||
solid_infill_extruder = 1
|
||||
solid_infill_extrusion_width = 0.56
|
||||
@ -96,7 +101,7 @@ solid_infill_speed = 60
|
||||
spiral_vase = 0
|
||||
standby_temperature_delta = -5
|
||||
support_material = 0
|
||||
support_material_angle = 0
|
||||
support_material_angle = 45
|
||||
support_material_auto = 1
|
||||
support_material_buildplate_only = 0
|
||||
support_material_contact_distance = 0.2
|
||||
@ -110,17 +115,14 @@ support_material_interface_spacing = 0
|
||||
support_material_interface_speed = 100%
|
||||
support_material_pattern = rectilinear
|
||||
support_material_spacing = 2.5
|
||||
support_material_speed = 60
|
||||
support_material_speed = 50
|
||||
support_material_synchronize_layers = 0
|
||||
support_material_threshold = 0
|
||||
support_material_with_sheath = 1
|
||||
support_material_xy_spacing = 50%
|
||||
support_material_xy_spacing = 60%
|
||||
thin_walls = 1
|
||||
threads = 12
|
||||
top_fill_pattern = rectilinear
|
||||
top_infill_extrusion_width = 0.52
|
||||
top_solid_infill_speed = 40
|
||||
top_solid_layers = 3
|
||||
travel_speed = 175
|
||||
wipe_tower = 0
|
||||
wipe_tower_bridging = 10
|
||||
@ -130,121 +132,116 @@ wipe_tower_x = 180
|
||||
wipe_tower_y = 140
|
||||
xy_size_compensation = 0
|
||||
|
||||
[print:0.14mm DETAIL @lulzbot]
|
||||
inherits = *common*
|
||||
layer_height = 0.14
|
||||
bottom_solid_layers = 8
|
||||
top_solid_layers = 8
|
||||
infill_speed = 40
|
||||
solid_infill_speed = 50
|
||||
perimeter_speed = 35
|
||||
external_perimeter_speed = 30
|
||||
top_solid_infill_speed = 40
|
||||
|
||||
[print:0.25mm STANDARD @lulzbot]
|
||||
inherits = *common*
|
||||
|
||||
[print:0.30mm SPEED @lulzbot]
|
||||
inherits = *common*
|
||||
renamed_from = "0.3mm @lulzbot"
|
||||
layer_height = 0.3
|
||||
seam_position = nearest
|
||||
top_solid_layers = 3
|
||||
infill_speed = 45
|
||||
perimeter_speed = 40
|
||||
external_perimeter_speed = 35
|
||||
|
||||
[filament:ColorFabb PLA-PHA @lulzbot]
|
||||
filament_vendor = ColorFabb
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 0
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 0
|
||||
filament_density = 1.25
|
||||
filament_deretract_speed = nil
|
||||
filament_diameter = 2.85
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 200
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 200
|
||||
|
||||
[filament:PrintedSolid Jesse PLA @lulzbot]
|
||||
filament_vendor = PrintedSolid
|
||||
[filament:Jessie PLA @lulzbot]
|
||||
filament_vendor = Printed Solid
|
||||
renamed_from = "PrintedSolid Jesse PLA @lulzbot"
|
||||
bed_temperature = 60
|
||||
bridge_fan_speed = 100
|
||||
compatible_printers =
|
||||
compatible_printers_condition =
|
||||
compatible_prints =
|
||||
compatible_prints_condition =
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 0
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cooling_final_speed = 3.4
|
||||
filament_cooling_initial_speed = 2.2
|
||||
filament_cooling_moves = 4
|
||||
filament_cost = 27
|
||||
filament_density = 1.25
|
||||
filament_deretract_speed = nil
|
||||
filament_density = 1.24
|
||||
filament_diameter = 2.85
|
||||
filament_load_time = 0
|
||||
filament_loading_speed = 28
|
||||
filament_loading_speed_start = 3
|
||||
filament_max_volumetric_speed = 0
|
||||
filament_minimal_purge_on_wipe_tower = 15
|
||||
filament_notes = ""
|
||||
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
filament_retract_before_travel = nil
|
||||
filament_retract_before_wipe = nil
|
||||
filament_retract_layer_change = nil
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = nil
|
||||
filament_retract_lift_above = nil
|
||||
filament_retract_lift_below = nil
|
||||
filament_retract_restart_extra = nil
|
||||
filament_retract_speed = nil
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PLA
|
||||
filament_unload_time = 0
|
||||
filament_unloading_speed = 90
|
||||
filament_unloading_speed_start = 100
|
||||
filament_wipe = nil
|
||||
first_layer_bed_temperature = 60
|
||||
first_layer_temperature = 220
|
||||
inherits =
|
||||
max_fan_speed = 100
|
||||
min_fan_speed = 35
|
||||
min_fan_speed = 80
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 5
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
temperature = 220
|
||||
|
||||
[filament:Generic PLA @lulzbot]
|
||||
inherits = Jessie PLA @lulzbot
|
||||
filament_vendor = Generic
|
||||
|
||||
[filament:Generic PETG @lulzbot]
|
||||
filament_vendor = Generic
|
||||
bed_temperature = 60
|
||||
first_layer_bed_temperature = 65
|
||||
first_layer_temperature = 235
|
||||
temperature = 230
|
||||
bridge_fan_speed = 100
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
|
||||
extrusion_multiplier = 1
|
||||
fan_always_on = 1
|
||||
fan_below_layer_time = 60
|
||||
filament_colour = #29B2B2
|
||||
filament_cost = 27
|
||||
filament_density = 1.27
|
||||
filament_diameter = 2.85
|
||||
filament_notes = "Use glue stick."
|
||||
filament_soluble = 0
|
||||
filament_toolchange_delay = 0
|
||||
filament_type = PETG
|
||||
max_fan_speed = 80
|
||||
min_fan_speed = 40
|
||||
min_print_speed = 10
|
||||
slowdown_below_layer_time = 10
|
||||
start_filament_gcode = "; Filament gcode\n"
|
||||
|
||||
[printer:Mini Aero 0.5mm]
|
||||
printer_model = MINI_AERO
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.3mm @lulzbot
|
||||
default_filament_profile = PrintedSolid Jesse PLA @lulzbot
|
||||
default_print_profile = 0.25mm STANDARD @lulzbot
|
||||
default_filament_profile = Jessie PLA @lulzbot
|
||||
bed_shape = 0x0,154x0,154x154,0x154
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
@ -259,22 +256,23 @@ gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 10000,5000
|
||||
machine_max_acceleration_extruding = 1500,1250
|
||||
machine_max_acceleration_retracting = 1500,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 100,200
|
||||
machine_max_feedrate_e = 40,120
|
||||
machine_max_feedrate_x = 800,200
|
||||
machine_max_feedrate_y = 800,200
|
||||
machine_max_feedrate_z = 8,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 20,10
|
||||
machine_max_jerk_y = 20,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
machine_max_acceleration_e = 10000
|
||||
machine_max_acceleration_extruding = 1500
|
||||
machine_max_acceleration_retracting = 1500
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_feedrate_e = 40
|
||||
machine_max_feedrate_x = 300
|
||||
machine_max_feedrate_y = 300
|
||||
machine_max_feedrate_z = 8
|
||||
machine_max_jerk_e = 2.5
|
||||
machine_max_jerk_x = 20
|
||||
machine_max_jerk_y = 20
|
||||
machine_max_jerk_z = 0.2
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
machine_limits_usage = time_estimate_only
|
||||
max_layer_height = 0
|
||||
max_print_height = 158
|
||||
min_layer_height = 0.07
|
||||
@ -292,7 +290,7 @@ retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
retract_speed = 30
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
|
||||
@ -308,8 +306,8 @@ z_offset = 0
|
||||
[printer:Taz6 Aero 0.5mm]
|
||||
printer_model = TAZ6_AERO
|
||||
printer_variant = 0.5
|
||||
default_print_profile = 0.3mm @lulzbot
|
||||
default_filament_profile = PrintedSolid Jesse PLA @lulzbot
|
||||
default_print_profile = 0.25mm STANDARD @lulzbot
|
||||
default_filament_profile = Jessie PLA @lulzbot
|
||||
bed_shape = 0x0,280x0,280x280,0x280
|
||||
before_layer_gcode =
|
||||
between_objects_gcode =
|
||||
@ -324,22 +322,23 @@ gcode_flavor = marlin
|
||||
high_current_on_filament_swap = 0
|
||||
inherits =
|
||||
layer_gcode =
|
||||
machine_max_acceleration_e = 1000,5000
|
||||
machine_max_acceleration_extruding = 1000,1250
|
||||
machine_max_acceleration_retracting = 1000,1250
|
||||
machine_max_acceleration_x = 9000,1000
|
||||
machine_max_acceleration_y = 9000,1000
|
||||
machine_max_acceleration_z = 100,200
|
||||
machine_max_feedrate_e = 40,120
|
||||
machine_max_feedrate_x = 800,200
|
||||
machine_max_feedrate_y = 800,200
|
||||
machine_max_feedrate_z = 3,12
|
||||
machine_max_jerk_e = 2.5,2.5
|
||||
machine_max_jerk_x = 12,10
|
||||
machine_max_jerk_y = 12,10
|
||||
machine_max_jerk_z = 0.2,0.4
|
||||
machine_min_extruding_rate = 0,0
|
||||
machine_min_travel_rate = 0,0
|
||||
machine_max_acceleration_e = 1000
|
||||
machine_max_acceleration_extruding = 500
|
||||
machine_max_acceleration_retracting = 1000
|
||||
machine_max_acceleration_x = 9000
|
||||
machine_max_acceleration_y = 9000
|
||||
machine_max_acceleration_z = 100
|
||||
machine_max_feedrate_e = 40
|
||||
machine_max_feedrate_x = 300
|
||||
machine_max_feedrate_y = 300
|
||||
machine_max_feedrate_z = 3
|
||||
machine_max_jerk_e = 10
|
||||
machine_max_jerk_x = 8
|
||||
machine_max_jerk_y = 8
|
||||
machine_max_jerk_z = 0.4
|
||||
machine_min_extruding_rate = 0
|
||||
machine_min_travel_rate = 0
|
||||
machine_limits_usage = time_estimate_only
|
||||
max_layer_height = 0
|
||||
max_print_height = 250
|
||||
min_layer_height = 0.07
|
||||
@ -358,7 +357,7 @@ retract_lift_above = 0
|
||||
retract_lift_below = 0
|
||||
retract_restart_extra = 0
|
||||
retract_restart_extra_toolchange = 0
|
||||
retract_speed = 40
|
||||
retract_speed = 30
|
||||
silent_mode = 0
|
||||
single_extruder_multi_material = 0
|
||||
start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n
|
||||
@ -370,3 +369,55 @@ use_volumetric_e = 0
|
||||
variable_layer_height = 1
|
||||
wipe = 1
|
||||
z_offset = 0
|
||||
|
||||
# [printer:Taz Workhorse 0.5mm]
|
||||
# printer_model = TAZ_WORKHORSE
|
||||
# printer_variant = 0.5
|
||||
# printer_technology = FFF
|
||||
# default_print_profile = 0.25mm STANDARD @lulzbot
|
||||
# default_filament_profile = Jessie PLA @lulzbot
|
||||
# bed_shape = 0x0,280x0,280x280,0x280
|
||||
# deretract_speed = 20
|
||||
# end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG91 ; relative positioning\nG1 E-1 F300 ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000 ; lift up and retract even more filament\nG1 E6 ; re-prime extruder\nM117 Cooling please wait ; progress indicator message on LCD\nG90 ; absolute positioning\nG1 Y0 F3000 ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000 ; present finished print\nM140 S0; cool downs\nM77 ; stop GLCD timer\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n
|
||||
# extra_loading_move = -2
|
||||
# extruder_colour = ""
|
||||
# extruder_offset = 0x0
|
||||
# gcode_flavor = marlin
|
||||
# high_current_on_filament_swap = 0
|
||||
# machine_max_acceleration_e = 3000
|
||||
# machine_max_acceleration_extruding = 500
|
||||
# machine_max_acceleration_retracting = 2000
|
||||
# machine_max_acceleration_x = 9000
|
||||
# machine_max_acceleration_y = 9000
|
||||
# machine_max_acceleration_z = 100
|
||||
# machine_max_feedrate_e = 40
|
||||
# machine_max_feedrate_x = 300
|
||||
# machine_max_feedrate_y = 300
|
||||
# machine_max_feedrate_z = 25
|
||||
# machine_max_jerk_e = 10
|
||||
# machine_max_jerk_x = 8
|
||||
# machine_max_jerk_y = 8
|
||||
# machine_max_jerk_z = 0.4
|
||||
# machine_min_extruding_rate = 0
|
||||
# machine_min_travel_rate = 0
|
||||
# machine_limits_usage = time_estimate_only
|
||||
# max_layer_height = 0
|
||||
# max_print_height = 285
|
||||
# min_layer_height = 0.07
|
||||
# nozzle_diameter = 0.5
|
||||
# remaining_times = 0
|
||||
# retract_before_travel = 2
|
||||
# retract_before_wipe = 0%
|
||||
# retract_layer_change = 0
|
||||
# retract_length = 2
|
||||
# retract_length_toolchange = 10
|
||||
# retract_lift = 0
|
||||
# retract_speed = 40
|
||||
# silent_mode = 0
|
||||
# single_extruder_multi_material = 0
|
||||
# start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ Workhorse with HE Tool Head\n;\n;The following lines can be uncommented for printer specific fine tuning\n;More information can be found at https://marlinfw.org/meta/gcode/\n;\n;M92 E420 ;Set Axis Steps-per-unit\n;M301 P21.0 I1.78 D61.93 ;Set Hotend PID\n;M906 E160 ;Digipot Motor Current ((875mA-750)/5+135) = 160\n;\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable previous leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 ; Home all axis\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\n;M206 X0 Y0 Z0 ; uncomment to adjust wipe position (+X ~ nozzle moves left)(+Y ~ nozzle moves forward)(+Z ~ nozzle moves down)\nG12 ; wiping sequence\nM206 X0 Y0 Z0 ; reseting stock nozzle position ### CAUTION: changing this line can affect print quality ###\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X288 Y-10 F4000; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; activate bed level matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ Workhorse Printing... ; progress indicator message on LCD
|
||||
# use_relative_e_distances = 0
|
||||
# use_volumetric_e = 0
|
||||
# variable_layer_height = 1
|
||||
# wipe = 1
|
||||
# z_offset = 0
|
||||
|
||||
Loading…
Reference in New Issue
Block a user