Merge branch 'master' of https://github.com/prusa3d/Slic3r into opengl_to_cpp
This commit is contained in:
Enrico Turri
commit
1f79713c15
@ -1,3 +1,5 @@
|
||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
||||
0.1.4 edited fw version, added z-raise after print
|
||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
||||
0.1.2 Wipe tower changes
|
||||
0.1.1 Minor print speed adjustments
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
name = Prusa Research
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the Slic3r configuration to be downgraded.
|
||||
config_version = 0.1.3
|
||||
config_version = 0.1.5
|
||||
# Where to get the updates from?
|
||||
config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
|
||||
|
||||
@ -19,7 +19,7 @@ name = Original Prusa i3 MK3
|
||||
variants = 0.4; 0.25; 0.6
|
||||
|
||||
[printer_model:MK2S]
|
||||
name = Original Prusa i3 MK2S
|
||||
name = Original Prusa i3 MK2S, MK2.5
|
||||
variants = 0.4; 0.25; 0.6
|
||||
|
||||
[printer_model:MK2SMM]
|
||||
@ -251,10 +251,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
infill_speed = 170
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 170
|
||||
solid_infill_speed = 200
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
@ -278,10 +278,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
infill_speed = 170
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 170
|
||||
solid_infill_speed = 200
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
@ -292,10 +292,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
infill_speed = 170
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 170
|
||||
solid_infill_speed = 200
|
||||
top_infill_extrusion_width = 0.4
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
@ -356,10 +356,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
infill_speed = 170
|
||||
max_print_speed = 170
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 170
|
||||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
[print:0.15mm OPTIMAL SOLUBLE FULL]
|
||||
@ -388,10 +388,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
infill_speed = 170
|
||||
max_print_speed = 170
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 170
|
||||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
[print:*0.20mm*]
|
||||
inherits = *common*
|
||||
@ -414,10 +414,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
infill_speed = 170
|
||||
max_print_speed = 170
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 170
|
||||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
[print:0.20mm 100mms Linear Advance]
|
||||
@ -439,10 +439,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
infill_speed = 170
|
||||
max_print_speed = 170
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 170
|
||||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
[print:0.20mm NORMAL]
|
||||
@ -477,10 +477,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
external_perimeter_speed = 35
|
||||
fill_pattern = grid
|
||||
infill_acceleration = 1500
|
||||
infill_speed = 170
|
||||
max_print_speed = 170
|
||||
infill_speed = 200
|
||||
max_print_speed = 200
|
||||
perimeter_speed = 45
|
||||
solid_infill_speed = 170
|
||||
solid_infill_speed = 200
|
||||
top_solid_infill_speed = 50
|
||||
|
||||
[print:*0.35mm*]
|
||||
@ -877,10 +877,10 @@ temperature = 220
|
||||
|
||||
[printer:*common*]
|
||||
bed_shape = 0x0,250x0,250x210,0x210
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
||||
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
||||
between_objects_gcode =
|
||||
deretract_speed = 0
|
||||
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
extruder_colour = #FFFF00
|
||||
extruder_offset = 0x0
|
||||
gcode_flavor = marlin
|
||||
@ -941,7 +941,7 @@ printer_model = MK2SMM
|
||||
|
||||
[printer:*mm-single*]
|
||||
inherits = *multimaterial*
|
||||
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
||||
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
||||
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
|
||||
default_print_profile = 0.15mm OPTIMAL
|
||||
@ -949,7 +949,7 @@ default_filament_profile = Prusa PLA
|
||||
|
||||
[printer:*mm-multi*]
|
||||
inherits = *multimaterial*
|
||||
end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors
|
||||
end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors
|
||||
extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
|
||||
nozzle_diameter = 0.4,0.4,0.4,0.4
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
||||
@ -1001,37 +1001,39 @@ default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
||||
|
||||
[printer:Original Prusa i3 MK3]
|
||||
inherits = *common*
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||
retract_lift_below = 209
|
||||
max_print_height = 210
|
||||
start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
printer_model = MK3
|
||||
default_print_profile = 0.15mm OPTIMAL MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 0.25 nozzle]
|
||||
inherits = *common*
|
||||
nozzle_diameter = 0.25
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||
retract_lift_below = 209
|
||||
max_print_height = 210
|
||||
start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
printer_model = MK3
|
||||
printer_variant = 0.25
|
||||
default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 0.6 nozzle]
|
||||
inherits = *common*
|
||||
nozzle_diameter = 0.6
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors
|
||||
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
||||
retract_lift_below = 209
|
||||
max_print_height = 210
|
||||
start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
|
||||
printer_model = MK3
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3
|
||||
|
||||
# The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
|
||||
[obsolete_presets]
|
||||
print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3"
|
||||
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
|
||||
filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
|
||||
@ -42,14 +42,32 @@ namespace PrusaMultiMaterial {
|
||||
class Writer
|
||||
{
|
||||
public:
|
||||
Writer() :
|
||||
Writer(float layer_height, float line_width) :
|
||||
m_current_pos(std::numeric_limits<float>::max(), std::numeric_limits<float>::max()),
|
||||
m_current_z(0.f),
|
||||
m_current_feedrate(0.f),
|
||||
m_layer_height(0.f),
|
||||
m_layer_height(layer_height),
|
||||
m_extrusion_flow(0.f),
|
||||
m_preview_suppressed(false),
|
||||
m_elapsed_time(0.f) {}
|
||||
m_elapsed_time(0.f),
|
||||
m_default_analyzer_line_width(line_width)
|
||||
{
|
||||
// adds tag for analyzer:
|
||||
char buf[64];
|
||||
sprintf(buf, ";%s%f\n", GCodeAnalyzer::Height_Tag.c_str(), m_layer_height); // don't rely on GCodeAnalyzer knowing the layer height - it knows nothing at priming
|
||||
m_gcode += buf;
|
||||
sprintf(buf, ";%s%d\n", GCodeAnalyzer::Extrusion_Role_Tag.c_str(), erWipeTower);
|
||||
m_gcode += buf;
|
||||
change_analyzer_line_width(line_width);
|
||||
}
|
||||
|
||||
Writer& change_analyzer_line_width(float line_width) {
|
||||
// adds tag for analyzer:
|
||||
char buf[64];
|
||||
sprintf(buf, ";%s%f\n", GCodeAnalyzer::Width_Tag.c_str(), line_width);
|
||||
m_gcode += buf;
|
||||
return *this;
|
||||
}
|
||||
|
||||
Writer& set_initial_position(const WipeTower::xy &pos) {
|
||||
m_start_pos = WipeTower::xy(pos,0.f,m_y_shift).rotate(m_wipe_tower_pos, m_wipe_tower_width, m_wipe_tower_depth, m_angle_deg);
|
||||
@ -62,9 +80,6 @@ public:
|
||||
Writer& set_z(float z)
|
||||
{ m_current_z = z; return *this; }
|
||||
|
||||
Writer& set_layer_height(float layer_height)
|
||||
{ m_layer_height = layer_height; return *this; }
|
||||
|
||||
Writer& set_extrusion_flow(float flow)
|
||||
{ m_extrusion_flow = flow; return *this; }
|
||||
|
||||
@ -80,8 +95,8 @@ public:
|
||||
// Suppress / resume G-code preview in Slic3r. Slic3r will have difficulty to differentiate the various
|
||||
// filament loading and cooling moves from normal extrusion moves. Therefore the writer
|
||||
// is asked to suppres output of some lines, which look like extrusions.
|
||||
Writer& suppress_preview() { m_preview_suppressed = true; return *this; }
|
||||
Writer& resume_preview() { m_preview_suppressed = false; return *this; }
|
||||
Writer& suppress_preview() { change_analyzer_line_width(0.f); m_preview_suppressed = true; return *this; }
|
||||
Writer& resume_preview() { change_analyzer_line_width(m_default_analyzer_line_width); m_preview_suppressed = false; return *this; }
|
||||
|
||||
Writer& feedrate(float f)
|
||||
{
|
||||
@ -126,11 +141,6 @@ public:
|
||||
m_extrusions.emplace_back(WipeTower::Extrusion(WipeTower::xy(rot.x, rot.y), width, m_current_tool));
|
||||
}
|
||||
|
||||
// adds tag for analyzer
|
||||
char buf[64];
|
||||
sprintf(buf, ";%s%d\n", GCodeAnalyzer::Extrusion_Role_Tag.c_str(), erWipeTower);
|
||||
m_gcode += buf;
|
||||
|
||||
m_gcode += "G1";
|
||||
if (rot.x != rotated_current_pos.x) {
|
||||
m_gcode += set_format_X(rot.x); // Transform current position back to wipe tower coordinates (was updated by set_format_X)
|
||||
@ -390,6 +400,7 @@ private:
|
||||
float m_wipe_tower_depth = 0.f;
|
||||
float m_last_fan_speed = 0.f;
|
||||
int current_temp = -1;
|
||||
const float m_default_analyzer_line_width;
|
||||
|
||||
std::string
|
||||
set_format_X(float x)
|
||||
@ -479,10 +490,9 @@ WipeTower::ToolChangeResult WipeTowerPrusaMM::prime(
|
||||
const float prime_section_width = std::min(240.f / tools.size(), 60.f);
|
||||
box_coordinates cleaning_box(xy(5.f, 0.f), prime_section_width, 100.f);
|
||||
|
||||
PrusaMultiMaterial::Writer writer;
|
||||
PrusaMultiMaterial::Writer writer(m_layer_height, m_perimeter_width);
|
||||
writer.set_extrusion_flow(m_extrusion_flow)
|
||||
.set_z(m_z_pos)
|
||||
.set_layer_height(m_layer_height)
|
||||
.set_initial_tool(m_current_tool)
|
||||
.append(";--------------------\n"
|
||||
"; CP PRIMING START\n")
|
||||
@ -568,10 +578,9 @@ WipeTower::ToolChangeResult WipeTowerPrusaMM::tool_change(unsigned int tool, boo
|
||||
(tool != (unsigned int)(-1) ? /*m_layer_info->depth*/wipe_area+m_depth_traversed-0.5*m_perimeter_width
|
||||
: m_wipe_tower_depth-m_perimeter_width));
|
||||
|
||||
PrusaMultiMaterial::Writer writer;
|
||||
PrusaMultiMaterial::Writer writer(m_layer_height, m_perimeter_width);
|
||||
writer.set_extrusion_flow(m_extrusion_flow)
|
||||
.set_z(m_z_pos)
|
||||
.set_layer_height(m_layer_height)
|
||||
.set_initial_tool(m_current_tool)
|
||||
.set_rotation(m_wipe_tower_pos, m_wipe_tower_width, m_wipe_tower_depth, m_wipe_tower_rotation_angle)
|
||||
.set_y_shift(m_y_shift + (tool!=(unsigned int)(-1) && (m_current_shape == SHAPE_REVERSED && !m_peters_wipe_tower) ? m_layer_info->depth - m_layer_info->toolchanges_depth(): 0.f))
|
||||
@ -640,10 +649,9 @@ WipeTower::ToolChangeResult WipeTowerPrusaMM::toolchange_Brim(bool sideOnly, flo
|
||||
m_wipe_tower_width,
|
||||
m_wipe_tower_depth);
|
||||
|
||||
PrusaMultiMaterial::Writer writer;
|
||||
PrusaMultiMaterial::Writer writer(m_layer_height, m_perimeter_width);
|
||||
writer.set_extrusion_flow(m_extrusion_flow * 1.1f)
|
||||
.set_z(m_z_pos) // Let the writer know the current Z position as a base for Z-hop.
|
||||
.set_layer_height(m_layer_height)
|
||||
.set_initial_tool(m_current_tool)
|
||||
.set_rotation(m_wipe_tower_pos, m_wipe_tower_width, m_wipe_tower_depth, m_wipe_tower_rotation_angle)
|
||||
.append(";-------------------------------------\n"
|
||||
@ -697,11 +705,12 @@ void WipeTowerPrusaMM::toolchange_Unload(
|
||||
float xl = cleaning_box.ld.x + 1.f * m_perimeter_width;
|
||||
float xr = cleaning_box.rd.x - 1.f * m_perimeter_width;
|
||||
|
||||
writer.append("; CP TOOLCHANGE UNLOAD\n");
|
||||
|
||||
const float line_width = m_perimeter_width * m_filpar[m_current_tool].ramming_line_width_multiplicator; // desired ramming line thickness
|
||||
const float y_step = line_width * m_filpar[m_current_tool].ramming_step_multiplicator * m_extra_spacing; // spacing between lines in mm
|
||||
|
||||
writer.append("; CP TOOLCHANGE UNLOAD\n")
|
||||
.change_analyzer_line_width(line_width);
|
||||
|
||||
unsigned i = 0; // iterates through ramming_speed
|
||||
m_left_to_right = true; // current direction of ramming
|
||||
float remaining = xr - xl ; // keeps track of distance to the next turnaround
|
||||
@ -775,12 +784,14 @@ void WipeTowerPrusaMM::toolchange_Unload(
|
||||
}
|
||||
}
|
||||
WipeTower::xy end_of_ramming(writer.x(),writer.y());
|
||||
writer.change_analyzer_line_width(m_perimeter_width); // so the next lines are not affected by ramming_line_width_multiplier
|
||||
|
||||
// Pull the filament end to the BEGINNING of the cooling tube while still moving the print head
|
||||
float oldx = writer.x();
|
||||
float turning_point = (!m_left_to_right ? std::max(xl,oldx-15.f) : std::min(xr,oldx+15.f) ); // so it's not too far
|
||||
float xdist = std::abs(oldx-turning_point);
|
||||
float edist = -(m_cooling_tube_retraction+m_cooling_tube_length/2.f-42);
|
||||
|
||||
writer.suppress_preview()
|
||||
.load_move_x(turning_point,-15 , 60.f * std::hypot(xdist,15)/15 * 83 ) // fixed speed after ramming
|
||||
.load_move_x(oldx ,edist , 60.f * std::hypot(xdist,edist)/std::abs(edist) * m_filpar[m_current_tool].unloading_speed )
|
||||
@ -959,10 +970,9 @@ WipeTower::ToolChangeResult WipeTowerPrusaMM::finish_layer()
|
||||
// Otherwise the caller would likely travel to the wipe tower in vain.
|
||||
assert(! this->layer_finished());
|
||||
|
||||
PrusaMultiMaterial::Writer writer;
|
||||
PrusaMultiMaterial::Writer writer(m_layer_height, m_perimeter_width);
|
||||
writer.set_extrusion_flow(m_extrusion_flow)
|
||||
.set_z(m_z_pos)
|
||||
.set_layer_height(m_layer_height)
|
||||
.set_initial_tool(m_current_tool)
|
||||
.set_rotation(m_wipe_tower_pos, m_wipe_tower_width, m_wipe_tower_depth, m_wipe_tower_rotation_angle)
|
||||
.set_y_shift(m_y_shift - (m_current_shape == SHAPE_REVERSED && !m_peters_wipe_tower ? m_layer_info->toolchanges_depth() : 0.f))
|
||||
@ -1137,7 +1147,8 @@ void WipeTowerPrusaMM::save_on_last_wipe()
|
||||
// Resulting ToolChangeResults are appended into vector "result"
|
||||
void WipeTowerPrusaMM::generate(std::vector<std::vector<WipeTower::ToolChangeResult>> &result)
|
||||
{
|
||||
if (m_plan.empty()) return;
|
||||
if (m_plan.empty())
|
||||
return;
|
||||
|
||||
m_extra_spacing = 1.f;
|
||||
|
||||
@ -1151,8 +1162,9 @@ void WipeTowerPrusaMM::generate(std::vector<std::vector<WipeTower::ToolChangeRes
|
||||
make_wipe_tower_square();
|
||||
|
||||
m_layer_info = m_plan.begin();
|
||||
m_current_tool = (unsigned int)(-2); // we don't know which extruder to start with - we'll set it according to the first toolchange
|
||||
|
||||
std::vector<WipeTower::ToolChangeResult> layer_result;
|
||||
std::vector<WipeTower::ToolChangeResult> layer_result;
|
||||
for (auto layer : m_plan)
|
||||
{
|
||||
set_layer(layer.z,layer.height,0,layer.z == m_plan.front().z,layer.z == m_plan.back().z);
|
||||
@ -1166,8 +1178,11 @@ void WipeTowerPrusaMM::generate(std::vector<std::vector<WipeTower::ToolChangeRes
|
||||
if (!m_peters_wipe_tower && m_layer_info->depth < m_wipe_tower_depth - m_perimeter_width)
|
||||
m_y_shift = (m_wipe_tower_depth-m_layer_info->depth-m_perimeter_width)/2.f;
|
||||
|
||||
for (const auto &toolchange : layer.tool_changes)
|
||||
for (const auto &toolchange : layer.tool_changes) {
|
||||
if (m_current_tool == (unsigned int)(-2))
|
||||
m_current_tool = toolchange.old_tool;
|
||||
layer_result.emplace_back(tool_change(toolchange.new_tool, false));
|
||||
}
|
||||
|
||||
if (! layer_finished()) {
|
||||
auto finish_layer_toolchange = finish_layer();
|
||||
|
||||
@ -229,7 +229,7 @@ private:
|
||||
bool m_print_brim = true;
|
||||
// A fill-in direction (positive Y, negative Y) alternates with each layer.
|
||||
wipe_shape m_current_shape = SHAPE_NORMAL;
|
||||
unsigned int m_current_tool = 0;
|
||||
unsigned int m_current_tool;
|
||||
std::vector<std::vector<float>> wipe_volumes;
|
||||
|
||||
float m_depth_traversed = 0.f; // Current y position at the wipe tower.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user