3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Fix bug in regression infill causing bad clipping at very low layer heights. Includes regression test. #1669

Browse source
This commit is contained in:
Alessandro Ranellucci 2014-01-11 21:27:37 +01:00
parent b43ead06fe
commit 26f0fab27a
2 changed files with 30 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
lib/Slic3r/Fill/Rectilinear.pm
View file

@ -59,7 +59,7 @@ sub fill_surface {
# not perfectly straight
my @polylines = map Slic3r::Polyline->new(@$_),
@{ Boost::Geometry::Utils::multi_polygon_multi_linestring_intersection(
[ map $_->pp, @{$expolygon->offset_ex($line_spacing*0.05)} ],
[ map $_->pp, @{$expolygon->offset_ex(scaled_epsilon * 100)} ],
[ @vertical_lines ],
) };

33
t/fill.t
View file

@ -2,13 +2,15 @@ use Test::More;
use strict;
use warnings;
plan tests => 34;
plan tests => 40;
BEGIN {
use FindBin;
use lib "$FindBin::Bin/../lib";
}
use List::Util qw(first);
use Math::ConvexHull::MonotoneChain qw(convex_hull);
use Slic3r;
use Slic3r::Geometry qw(scale X Y);
use Slic3r::Geometry::Clipper qw(diff_ex);
@ -155,11 +157,34 @@ sub scale_points (@) { map [scale $_->[X], scale $_->[Y]], @_ }
'chained path';
}
for my $pattern (qw(hilbertcurve concentric)) {
for my $pattern (qw(rectilinear honeycomb hilbertcurve concentric)) {
my $config = Slic3r::Config->new_from_defaults;
$config->set('fill_pattern', $pattern);
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
ok Slic3r::Test::gcode($print), "successful $pattern infill generation";
$config->set('perimeters', 1);
$config->set('skirts', 0);
$config->set('fill_density', 0.2);
$config->set('layer_height', 0.05);
$config->set('perimeter_extruder', 1);
$config->set('infill_extruder', 2);
my $print = Slic3r::Test::init_print('20mm_cube', config => $config, scale => 2);
ok my $gcode = Slic3r::Test::gcode($print), "successful $pattern infill generation";
my $tool = undef;
my @perimeter_points = my @infill_points = ();
Slic3r::GCode::Reader->new->parse($gcode, sub {
my ($self, $cmd, $args, $info) = @_;
if ($cmd =~ /^T(\d+)/) {
$tool = $1;
} elsif ($cmd eq 'G1' && $info->{extruding} && $info->{dist_XY} > 0) {
if ($tool == $config->perimeter_extruder-1) {
push @perimeter_points, Slic3r::Point->new_scale($args->{X}, $args->{Y});
} elsif ($tool == $config->infill_extruder-1) {
push @infill_points, Slic3r::Point->new_scale($args->{X}, $args->{Y});
}
}
});
my $convex_hull = Slic3r::Polygon->new(@{convex_hull([ map $_->pp, @perimeter_points ])});
ok !(defined first { !$convex_hull->encloses_point($_) } @infill_points), "infill does not exceed perimeters ($pattern)";
}
{