Merge remote-tracking branch 'remotes/origin/master' into vb_print_regions
This commit is contained in:
Vojtech Bubnik
commit
99301f89f6
Binary file not shown.
|
Before Width: | Height: | Size: 65 KiB After Width: | Height: | Size: 102 KiB |
@ -29,6 +29,11 @@ static const float MMMIN_TO_MMSEC = 1.0f / 60.0f;
|
||||
static const float DEFAULT_ACCELERATION = 1500.0f; // Prusa Firmware 1_75mm_MK2
|
||||
static const float DEFAULT_TRAVEL_ACCELERATION = 1250.0f;
|
||||
|
||||
static const size_t MIN_EXTRUDERS_COUNT = 5;
|
||||
static const float DEFAULT_FILAMENT_DIAMETER = 1.75f;
|
||||
static const float DEFAULT_FILAMENT_DENSITY = 1.245f;
|
||||
static const Slic3r::Vec3f DEFAULT_EXTRUDER_OFFSET = Slic3r::Vec3f::Zero();
|
||||
|
||||
namespace Slic3r {
|
||||
|
||||
#if ENABLE_VALIDATE_CUSTOM_GCODE
|
||||
@ -187,72 +192,6 @@ void GCodeProcessor::TimeMachine::CustomGCodeTime::reset()
|
||||
times = std::vector<std::pair<CustomGCode::Type, float>>();
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::reset()
|
||||
{
|
||||
color_change_cache = 0.0f;
|
||||
volumes_per_color_change = std::vector<double>();
|
||||
|
||||
tool_change_cache = 0.0f;
|
||||
volumes_per_extruder.clear();
|
||||
|
||||
role_cache = 0.0f;
|
||||
filaments_per_role.clear();
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::increase_caches(double extruded_volume)
|
||||
{
|
||||
color_change_cache += extruded_volume;
|
||||
tool_change_cache += extruded_volume;
|
||||
role_cache += extruded_volume;
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::process_color_change_cache()
|
||||
{
|
||||
if (color_change_cache != 0.0f) {
|
||||
volumes_per_color_change.push_back(color_change_cache);
|
||||
color_change_cache = 0.0f;
|
||||
}
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::process_extruder_cache(GCodeProcessor* processor)
|
||||
{
|
||||
size_t active_extruder_id = processor->m_extruder_id;
|
||||
if (tool_change_cache != 0.0f) {
|
||||
if (volumes_per_extruder.find(active_extruder_id) != volumes_per_extruder.end())
|
||||
volumes_per_extruder[active_extruder_id] += tool_change_cache;
|
||||
else
|
||||
volumes_per_extruder[active_extruder_id] = tool_change_cache;
|
||||
tool_change_cache = 0.0f;
|
||||
}
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::process_role_cache(GCodeProcessor* processor)
|
||||
{
|
||||
if (role_cache != 0.0f) {
|
||||
std::pair<double, double> filament = { 0.0f, 0.0f };
|
||||
|
||||
double s = PI * sqr(0.5 * processor->m_filament_diameters[processor->m_extruder_id]);
|
||||
filament.first = role_cache/s * 0.001;
|
||||
filament.second = role_cache * processor->m_filament_densities[processor->m_extruder_id] * 0.001;
|
||||
|
||||
ExtrusionRole active_role = processor->m_extrusion_role;
|
||||
if (filaments_per_role.find(active_role) != filaments_per_role.end()) {
|
||||
filaments_per_role[active_role].first += filament.first;
|
||||
filaments_per_role[active_role].second += filament.second;
|
||||
}
|
||||
else
|
||||
filaments_per_role[active_role] = filament;
|
||||
role_cache = 0.0f;
|
||||
}
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::process_caches(GCodeProcessor* processor)
|
||||
{
|
||||
process_color_change_cache();
|
||||
process_extruder_cache(processor);
|
||||
process_role_cache(processor);
|
||||
}
|
||||
|
||||
void GCodeProcessor::TimeMachine::reset()
|
||||
{
|
||||
enabled = false;
|
||||
@ -785,6 +724,95 @@ void GCodeProcessor::TimeProcessor::post_process(const std::string& filename)
|
||||
"Is " + out_path + " locked?" + '\n');
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::reset()
|
||||
{
|
||||
color_change_cache = 0.0f;
|
||||
volumes_per_color_change = std::vector<double>();
|
||||
|
||||
tool_change_cache = 0.0f;
|
||||
volumes_per_extruder.clear();
|
||||
|
||||
role_cache = 0.0f;
|
||||
filaments_per_role.clear();
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::increase_caches(double extruded_volume)
|
||||
{
|
||||
color_change_cache += extruded_volume;
|
||||
tool_change_cache += extruded_volume;
|
||||
role_cache += extruded_volume;
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::process_color_change_cache()
|
||||
{
|
||||
if (color_change_cache != 0.0f) {
|
||||
volumes_per_color_change.push_back(color_change_cache);
|
||||
color_change_cache = 0.0f;
|
||||
}
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::process_extruder_cache(GCodeProcessor* processor)
|
||||
{
|
||||
size_t active_extruder_id = processor->m_extruder_id;
|
||||
if (tool_change_cache != 0.0f) {
|
||||
if (volumes_per_extruder.find(active_extruder_id) != volumes_per_extruder.end())
|
||||
volumes_per_extruder[active_extruder_id] += tool_change_cache;
|
||||
else
|
||||
volumes_per_extruder[active_extruder_id] = tool_change_cache;
|
||||
tool_change_cache = 0.0f;
|
||||
}
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::process_role_cache(GCodeProcessor* processor)
|
||||
{
|
||||
if (role_cache != 0.0f) {
|
||||
std::pair<double, double> filament = { 0.0f, 0.0f };
|
||||
|
||||
double s = PI * sqr(0.5 * processor->m_result.filament_diameters[processor->m_extruder_id]);
|
||||
filament.first = role_cache / s * 0.001;
|
||||
filament.second = role_cache * processor->m_result.filament_densities[processor->m_extruder_id] * 0.001;
|
||||
|
||||
ExtrusionRole active_role = processor->m_extrusion_role;
|
||||
if (filaments_per_role.find(active_role) != filaments_per_role.end()) {
|
||||
filaments_per_role[active_role].first += filament.first;
|
||||
filaments_per_role[active_role].second += filament.second;
|
||||
}
|
||||
else
|
||||
filaments_per_role[active_role] = filament;
|
||||
role_cache = 0.0f;
|
||||
}
|
||||
}
|
||||
|
||||
void GCodeProcessor::UsedFilaments::process_caches(GCodeProcessor* processor)
|
||||
{
|
||||
process_color_change_cache();
|
||||
process_extruder_cache(processor);
|
||||
process_role_cache(processor);
|
||||
}
|
||||
|
||||
#if ENABLE_GCODE_VIEWER_STATISTICS
|
||||
void GCodeProcessor::Result::reset() {
|
||||
moves = std::vector<GCodeProcessor::MoveVertex>();
|
||||
bed_shape = Pointfs();
|
||||
settings_ids.reset();
|
||||
extruders_count = 0;
|
||||
extruder_colors = std::vector<std::string>();
|
||||
filament_diameters = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DIAMETER);
|
||||
filament_densities = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DENSITY);
|
||||
time = 0;
|
||||
}
|
||||
#else
|
||||
void GCodeProcessor::Result::reset() {
|
||||
moves = std::vector<GCodeProcessor::MoveVertex>();
|
||||
bed_shape = Pointfs();
|
||||
settings_ids.reset();
|
||||
extruders_count = 0;
|
||||
extruder_colors = std::vector<std::string>();
|
||||
filament_diameters = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DIAMETER);
|
||||
filament_densities = std::vector<float>(MIN_EXTRUDERS_COUNT, DEFAULT_FILAMENT_DENSITY);
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER_STATISTICS
|
||||
|
||||
const std::vector<std::pair<GCodeProcessor::EProducer, std::string>> GCodeProcessor::Producers = {
|
||||
{ EProducer::PrusaSlicer, "PrusaSlicer" },
|
||||
{ EProducer::Slic3rPE, "Slic3r Prusa Edition" },
|
||||
@ -886,14 +914,14 @@ void GCodeProcessor::apply_config(const PrintConfig& config)
|
||||
|
||||
m_extruder_temps.resize(extruders_count);
|
||||
|
||||
m_filament_diameters.resize(config.filament_diameter.values.size());
|
||||
m_result.filament_diameters.resize(config.filament_diameter.values.size());
|
||||
for (size_t i = 0; i < config.filament_diameter.values.size(); ++i) {
|
||||
m_filament_diameters[i] = static_cast<float>(config.filament_diameter.values[i]);
|
||||
m_result.filament_diameters[i] = static_cast<float>(config.filament_diameter.values[i]);
|
||||
}
|
||||
|
||||
m_filament_densities.resize(config.filament_density.values.size());
|
||||
m_result.filament_densities.resize(config.filament_density.values.size());
|
||||
for (size_t i = 0; i < config.filament_density.values.size(); ++i) {
|
||||
m_filament_densities[i] = static_cast<float>(config.filament_density.values[i]);
|
||||
m_result.filament_densities[i] = static_cast<float>(config.filament_density.values[i]);
|
||||
}
|
||||
|
||||
if ((m_flavor == gcfMarlinLegacy || m_flavor == gcfMarlinFirmware) && config.machine_limits_usage.value != MachineLimitsUsage::Ignore) {
|
||||
@ -959,21 +987,37 @@ void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
|
||||
if (printer_settings_id != nullptr)
|
||||
m_result.settings_ids.printer = printer_settings_id->value;
|
||||
|
||||
m_result.extruders_count = config.option<ConfigOptionFloats>("nozzle_diameter")->values.size();
|
||||
|
||||
const ConfigOptionFloats* filament_diameters = config.option<ConfigOptionFloats>("filament_diameter");
|
||||
if (filament_diameters != nullptr) {
|
||||
for (double diam : filament_diameters->values) {
|
||||
m_filament_diameters.push_back(static_cast<float>(diam));
|
||||
m_result.filament_diameters.clear();
|
||||
m_result.filament_diameters.resize(filament_diameters->values.size());
|
||||
for (size_t i = 0; i < filament_diameters->values.size(); ++i) {
|
||||
m_result.filament_diameters[i] = static_cast<float>(filament_diameters->values[i]);
|
||||
}
|
||||
}
|
||||
|
||||
if (m_result.filament_diameters.size() < m_result.extruders_count) {
|
||||
for (size_t i = m_result.filament_diameters.size(); i < m_result.extruders_count; ++i) {
|
||||
m_result.filament_diameters.emplace_back(DEFAULT_FILAMENT_DIAMETER);
|
||||
}
|
||||
}
|
||||
|
||||
const ConfigOptionFloats* filament_densities = config.option<ConfigOptionFloats>("filament_density");
|
||||
if (filament_densities != nullptr) {
|
||||
for (double dens : filament_densities->values) {
|
||||
m_filament_densities.push_back(static_cast<float>(dens));
|
||||
m_result.filament_densities.clear();
|
||||
m_result.filament_densities.resize(filament_densities->values.size());
|
||||
for (size_t i = 0; i < filament_densities->values.size(); ++i) {
|
||||
m_result.filament_densities[i] = static_cast<float>(filament_densities->values[i]);
|
||||
}
|
||||
}
|
||||
|
||||
m_result.extruders_count = config.option<ConfigOptionFloats>("nozzle_diameter")->values.size();
|
||||
if (m_result.filament_densities.size() < m_result.extruders_count) {
|
||||
for (size_t i = m_result.filament_densities.size(); i < m_result.extruders_count; ++i) {
|
||||
m_result.filament_densities.emplace_back(DEFAULT_FILAMENT_DENSITY);
|
||||
}
|
||||
}
|
||||
|
||||
const ConfigOptionPoints* extruder_offset = config.option<ConfigOptionPoints>("extruder_offset");
|
||||
if (extruder_offset != nullptr) {
|
||||
@ -984,6 +1028,12 @@ void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
|
||||
}
|
||||
}
|
||||
|
||||
if (m_extruder_offsets.size() < m_result.extruders_count) {
|
||||
for (size_t i = m_extruder_offsets.size(); i < m_result.extruders_count; ++i) {
|
||||
m_extruder_offsets.emplace_back(DEFAULT_EXTRUDER_OFFSET);
|
||||
}
|
||||
}
|
||||
|
||||
const ConfigOptionStrings* extruder_colour = config.option<ConfigOptionStrings>("extruder_colour");
|
||||
if (extruder_colour != nullptr) {
|
||||
// takes colors from config
|
||||
@ -998,6 +1048,12 @@ void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
|
||||
}
|
||||
}
|
||||
|
||||
if (m_result.extruder_colors.size() < m_result.extruders_count) {
|
||||
for (size_t i = m_result.extruder_colors.size(); i < m_result.extruders_count; ++i) {
|
||||
m_result.extruder_colors.emplace_back(std::string());
|
||||
}
|
||||
}
|
||||
|
||||
// replace missing values with default
|
||||
std::string default_color = "#FF8000";
|
||||
for (size_t i = 0; i < m_result.extruder_colors.size(); ++i) {
|
||||
@ -1133,12 +1189,10 @@ void GCodeProcessor::enable_stealth_time_estimator(bool enabled)
|
||||
|
||||
void GCodeProcessor::reset()
|
||||
{
|
||||
static const size_t Min_Extruder_Count = 5;
|
||||
|
||||
m_units = EUnits::Millimeters;
|
||||
m_global_positioning_type = EPositioningType::Absolute;
|
||||
m_e_local_positioning_type = EPositioningType::Absolute;
|
||||
m_extruder_offsets = std::vector<Vec3f>(Min_Extruder_Count, Vec3f::Zero());
|
||||
m_extruder_offsets = std::vector<Vec3f>(MIN_EXTRUDERS_COUNT, Vec3f::Zero());
|
||||
m_flavor = gcfRepRapSprinter;
|
||||
|
||||
m_start_position = { 0.0f, 0.0f, 0.0f, 0.0f };
|
||||
@ -1163,17 +1217,15 @@ void GCodeProcessor::reset()
|
||||
|
||||
m_extrusion_role = erNone;
|
||||
m_extruder_id = 0;
|
||||
m_extruder_colors.resize(Min_Extruder_Count);
|
||||
for (size_t i = 0; i < Min_Extruder_Count; ++i) {
|
||||
m_extruder_colors.resize(MIN_EXTRUDERS_COUNT);
|
||||
for (size_t i = 0; i < MIN_EXTRUDERS_COUNT; ++i) {
|
||||
m_extruder_colors[i] = static_cast<unsigned char>(i);
|
||||
}
|
||||
m_extruder_temps.resize(Min_Extruder_Count);
|
||||
for (size_t i = 0; i < Min_Extruder_Count; ++i) {
|
||||
m_extruder_temps.resize(MIN_EXTRUDERS_COUNT);
|
||||
for (size_t i = 0; i < MIN_EXTRUDERS_COUNT; ++i) {
|
||||
m_extruder_temps[i] = 0.0f;
|
||||
}
|
||||
|
||||
m_filament_diameters = std::vector<float>(Min_Extruder_Count, 1.75f);
|
||||
m_filament_densities = std::vector<float>(Min_Extruder_Count, 1.245f);
|
||||
m_extruded_last_z = 0.0f;
|
||||
#if ENABLE_START_GCODE_VISUALIZATION
|
||||
m_first_layer_height = 0.0f;
|
||||
@ -2205,7 +2257,7 @@ void GCodeProcessor::process_G0(const GCodeReader::GCodeLine& line)
|
||||
|
||||
void GCodeProcessor::process_G1(const GCodeReader::GCodeLine& line)
|
||||
{
|
||||
float filament_diameter = (static_cast<size_t>(m_extruder_id) < m_filament_diameters.size()) ? m_filament_diameters[m_extruder_id] : m_filament_diameters.back();
|
||||
float filament_diameter = (static_cast<size_t>(m_extruder_id) < m_result.filament_diameters.size()) ? m_result.filament_diameters[m_extruder_id] : m_result.filament_diameters.back();
|
||||
float filament_radius = 0.5f * filament_diameter;
|
||||
float area_filament_cross_section = static_cast<float>(M_PI) * sqr(filament_radius);
|
||||
auto absolute_position = [this, area_filament_cross_section](Axis axis, const GCodeReader::GCodeLine& lineG1) {
|
||||
@ -2307,7 +2359,7 @@ void GCodeProcessor::process_G1(const GCodeReader::GCodeLine& line)
|
||||
m_width = delta_pos[E] * static_cast<float>(M_PI * sqr(1.05f * filament_radius)) / (delta_xyz * m_height);
|
||||
else if (m_extrusion_role == erBridgeInfill || m_extrusion_role == erNone)
|
||||
// cross section: circle
|
||||
m_width = static_cast<float>(m_filament_diameters[m_extruder_id]) * std::sqrt(delta_pos[E] / delta_xyz);
|
||||
m_width = static_cast<float>(m_result.filament_diameters[m_extruder_id]) * std::sqrt(delta_pos[E] / delta_xyz);
|
||||
else
|
||||
// cross section: rectangle + 2 semicircles
|
||||
m_width = delta_pos[E] * static_cast<float>(M_PI * sqr(filament_radius)) / (delta_xyz * m_height) + static_cast<float>(1.0 - 0.25 * M_PI) * m_height;
|
||||
@ -2945,8 +2997,7 @@ void GCodeProcessor::process_T(const std::string_view command)
|
||||
} else {
|
||||
unsigned char id = static_cast<unsigned char>(eid);
|
||||
if (m_extruder_id != id) {
|
||||
unsigned char extruders_count = static_cast<unsigned char>(m_extruder_offsets.size());
|
||||
if (id >= extruders_count)
|
||||
if (id >= m_result.extruders_count)
|
||||
BOOST_LOG_TRIVIAL(error) << "GCodeProcessor encountered an invalid toolchange, maybe from a custom gcode.";
|
||||
else {
|
||||
unsigned char old_extruder_id = m_extruder_id;
|
||||
|
||||
@ -343,7 +343,6 @@ namespace Slic3r {
|
||||
std::map<size_t, double> volumes_per_extruder;
|
||||
|
||||
double role_cache;
|
||||
// ExtrusionRole : <used_filament_m, used_filament_g>
|
||||
std::map<ExtrusionRole, std::pair<double, double>> filaments_per_role;
|
||||
|
||||
void reset();
|
||||
@ -403,27 +402,14 @@ namespace Slic3r {
|
||||
SettingsIds settings_ids;
|
||||
size_t extruders_count;
|
||||
std::vector<std::string> extruder_colors;
|
||||
std::vector<float> filament_diameters;
|
||||
std::vector<float> filament_densities;
|
||||
PrintEstimatedStatistics print_statistics;
|
||||
|
||||
#if ENABLE_GCODE_VIEWER_STATISTICS
|
||||
int64_t time{ 0 };
|
||||
void reset() {
|
||||
time = 0;
|
||||
moves = std::vector<MoveVertex>();
|
||||
bed_shape = Pointfs();
|
||||
extruder_colors = std::vector<std::string>();
|
||||
extruders_count = 0;
|
||||
settings_ids.reset();
|
||||
}
|
||||
#else
|
||||
void reset() {
|
||||
moves = std::vector<MoveVertex>();
|
||||
bed_shape = Pointfs();
|
||||
extruder_colors = std::vector<std::string>();
|
||||
extruders_count = 0;
|
||||
settings_ids.reset();
|
||||
}
|
||||
#endif // ENABLE_GCODE_VIEWER_STATISTICS
|
||||
void reset();
|
||||
};
|
||||
|
||||
#if ENABLE_SEAMS_VISUALIZATION
|
||||
@ -549,8 +535,6 @@ namespace Slic3r {
|
||||
unsigned char m_extruder_id;
|
||||
ExtruderColors m_extruder_colors;
|
||||
ExtruderTemps m_extruder_temps;
|
||||
std::vector<float> m_filament_diameters;
|
||||
std::vector<float> m_filament_densities;
|
||||
float m_extruded_last_z;
|
||||
#if ENABLE_START_GCODE_VISUALIZATION
|
||||
float m_first_layer_height; // mm
|
||||
|
||||
@ -606,6 +606,8 @@ void GCodeViewer::load(const GCodeProcessor::Result& gcode_result, const Print&
|
||||
return;
|
||||
|
||||
m_settings_ids = gcode_result.settings_ids;
|
||||
m_filament_diameters = gcode_result.filament_diameters;
|
||||
m_filament_densities = gcode_result.filament_densities;
|
||||
|
||||
if (wxGetApp().is_editor())
|
||||
load_shells(print, initialized);
|
||||
@ -746,6 +748,8 @@ void GCodeViewer::reset()
|
||||
m_tool_colors = std::vector<Color>();
|
||||
m_extruders_count = 0;
|
||||
m_extruder_ids = std::vector<unsigned char>();
|
||||
m_filament_diameters = std::vector<float>();
|
||||
m_filament_densities = std::vector<float>();
|
||||
m_extrusions.reset_role_visibility_flags();
|
||||
m_extrusions.reset_ranges();
|
||||
m_shells.volumes.clear();
|
||||
@ -2892,20 +2896,10 @@ void GCodeViewer::render_legend() const
|
||||
}
|
||||
|
||||
// get used filament (meters and grams) from used volume in respect to the active extruder
|
||||
auto get_used_filament_from_volume = [imperial_units](double volume, int extruder_id) {
|
||||
const std::vector<std::string>& filament_presets = wxGetApp().preset_bundle->filament_presets;
|
||||
const PresetCollection& filaments = wxGetApp().preset_bundle->filaments;
|
||||
|
||||
double koef = imperial_units ? 1.0/ObjectManipulation::in_to_mm : 0.001;
|
||||
|
||||
std::pair<double, double> ret = { 0.0, 0.0 };
|
||||
if (const Preset* filament_preset = filaments.find_preset(filament_presets[extruder_id], false)) {
|
||||
double filament_radius = 0.5 * filament_preset->config.opt_float("filament_diameter", 0);
|
||||
double s = PI * sqr(filament_radius);
|
||||
ret.first = volume / s * koef;
|
||||
double filament_density = filament_preset->config.opt_float("filament_density", 0);
|
||||
ret.second = volume * filament_density * 0.001;
|
||||
}
|
||||
auto get_used_filament_from_volume = [this, imperial_units](double volume, int extruder_id) {
|
||||
double koef = imperial_units ? 1.0 / ObjectManipulation::in_to_mm : 0.001;
|
||||
std::pair<double, double> ret = { koef * volume / (PI * sqr(0.5 * m_filament_diameters[extruder_id])),
|
||||
volume * m_filament_densities[extruder_id] * 0.001 };
|
||||
return ret;
|
||||
};
|
||||
|
||||
@ -3339,10 +3333,19 @@ void GCodeViewer::render_legend() const
|
||||
}
|
||||
|
||||
// settings section
|
||||
if (wxGetApp().is_gcode_viewer() &&
|
||||
(m_view_type == EViewType::FeatureType || m_view_type == EViewType::Tool) &&
|
||||
(!m_settings_ids.print.empty() || !m_settings_ids.filament.empty() || !m_settings_ids.printer.empty())) {
|
||||
|
||||
bool has_settings = false;
|
||||
has_settings |= !m_settings_ids.print.empty();
|
||||
has_settings |= !m_settings_ids.printer.empty();
|
||||
bool has_filament_settings = true;
|
||||
has_filament_settings &= !m_settings_ids.filament.empty();
|
||||
for (const std::string& fs : m_settings_ids.filament) {
|
||||
has_filament_settings &= !fs.empty();
|
||||
}
|
||||
has_settings |= has_filament_settings;
|
||||
bool show_settings = wxGetApp().is_gcode_viewer();
|
||||
show_settings &= (m_view_type == EViewType::FeatureType || m_view_type == EViewType::Tool);
|
||||
show_settings &= has_settings;
|
||||
if (show_settings) {
|
||||
auto calc_offset = [this]() {
|
||||
float ret = 0.0f;
|
||||
if (!m_settings_ids.printer.empty())
|
||||
@ -3359,13 +3362,8 @@ void GCodeViewer::render_legend() const
|
||||
return ret;
|
||||
};
|
||||
|
||||
|
||||
ImGui::Spacing();
|
||||
ImGui::Spacing();
|
||||
ImGui::PushStyleColor(ImGuiCol_Separator, { 1.0f, 1.0f, 1.0f, 1.0f });
|
||||
ImGui::Separator();
|
||||
ImGui::PopStyleColor();
|
||||
ImGui::Spacing();
|
||||
imgui.title(_u8L("Settings"));
|
||||
|
||||
float offset = calc_offset();
|
||||
|
||||
@ -3381,11 +3379,13 @@ void GCodeViewer::render_legend() const
|
||||
}
|
||||
if (!m_settings_ids.filament.empty()) {
|
||||
for (unsigned char i : m_extruder_ids) {
|
||||
std::string txt = _u8L("Filament");
|
||||
txt += (m_extruder_ids.size() == 1) ? ":" : " " + std::to_string(i + 1);
|
||||
imgui.text(txt);
|
||||
ImGui::SameLine(offset);
|
||||
imgui.text(m_settings_ids.filament[i]);
|
||||
if (i < static_cast<unsigned char>(m_settings_ids.filament.size()) && !m_settings_ids.filament[i].empty()) {
|
||||
std::string txt = _u8L("Filament");
|
||||
txt += (m_extruder_ids.size() == 1) ? ":" : " " + std::to_string(i + 1);
|
||||
imgui.text(txt);
|
||||
ImGui::SameLine(offset);
|
||||
imgui.text(m_settings_ids.filament[i]);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@ -615,6 +615,8 @@ private:
|
||||
std::vector<ExtrusionRole> m_roles;
|
||||
size_t m_extruders_count;
|
||||
std::vector<unsigned char> m_extruder_ids;
|
||||
std::vector<float> m_filament_diameters;
|
||||
std::vector<float> m_filament_densities;
|
||||
Extrusions m_extrusions;
|
||||
SequentialView m_sequential_view;
|
||||
Shells m_shells;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user