3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Make flow_spacing required for ExtrusionPath objects

Browse Source
This commit is contained in:
Alessandro Ranellucci 2012-10-30 14:07:01 +01:00
parent 37637c34f5
commit be7e211bb6
5 changed files with 15 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
lib/Slic3r.pm
View File

@ -60,7 +60,7 @@ use constant SCALING_FACTOR => 0.000001;
use constant RESOLUTION => 0.01;
use constant OVERLAP_FACTOR => 0.5;
use constant SMALL_PERIMETER_LENGTH => (6.5 / SCALING_FACTOR) * 2 * PI;
use constant LOOP_CLIPPING_LENGTH_OVER_WIDTH => 0.15;
use constant LOOP_CLIPPING_LENGTH_OVER_SPACING => 0.15;
use constant PERIMETER_INFILL_OVERLAP_OVER_WIDTH => 0.4;
# The following variables hold the objects used throughout the slicing

2
lib/Slic3r/Fill/Concentric.pm
View File

@ -63,7 +63,7 @@ sub fill_surface {
my $path = $loop->split_at_index($index);
# clip the path to avoid the extruder to get exactly on the first point of the loop
$path->clip_end(($self->layer ? $self->layer->flow->scaled_width : $Slic3r::flow->scaled_width) * &Slic3r::LOOP_CLIPPING_LENGTH_OVER_WIDTH);
$path->clip_end(($self->layer ? $self->layer->flow->scaled_spacing : $Slic3r::flow->scaled_spacing) * &Slic3r::LOOP_CLIPPING_LENGTH_OVER_SPACING);
push @paths, $path->points if @{$path->points};
}

6
lib/Slic3r/Fill/Honeycomb.pm
View File

@ -90,12 +90,10 @@ sub fill_surface {
$self->cache->{$cache_id},
[ map @$_, $expolygon->offset_ex($overlap_distance) ],
)};
my $collection = Slic3r::ExtrusionPath::Collection->new(
paths => [ map Slic3r::ExtrusionPath->pack(polyline => $_, role => -1), @paths ],
);
return { flow_spacing => $params{flow_spacing} },
map $_->polyline, $collection->shortest_path;
map $_->polyline,
Slic3r::Polyline::Collection->new(polylines => \@paths)->shortest_path;
}
1;

14
lib/Slic3r/Fill/Rectilinear.pm
View File

@ -59,8 +59,8 @@ sub fill_surface {
# connect lines
unless ($params{dont_connect}) {
my $collection = Slic3r::ExtrusionPath::Collection->new(
paths => [ map Slic3r::ExtrusionPath->new(polyline => Slic3r::Polyline->new(@$_), role => -1), @paths ],
my $collection = Slic3r::Polyline::Collection->new(
polylines => [ map Slic3r::Polyline->new(@$_), @paths ],
);
@paths = ();
@ -75,17 +75,17 @@ sub fill_surface {
foreach my $path ($collection->shortest_path) {
if (@paths) {
my @distance = map abs($path->points->[0][$_] - $paths[-1][-1][$_]), (X,Y);
my @distance = map abs($path->[0][$_] - $paths[-1][-1][$_]), (X,Y);
# TODO: we should also check that both points are on a fill_boundary to avoid
# connecting paths on the boundaries of internal regions
if ($can_connect->(@distance, $paths[-1][-1], $path->points->[0])
&& $expolygon_off->encloses_line(Slic3r::Line->new($paths[-1][-1], $path->points->[0]), $tolerance)) {
push @{$paths[-1]}, @{$path->points};
if ($can_connect->(@distance, $paths[-1][-1], $path->[0])
&& $expolygon_off->encloses_line(Slic3r::Line->new($paths[-1][-1], $path->[0]), $tolerance)) {
push @{$paths[-1]}, @$path;
next;
}
}
push @paths, $path->points;
push @paths, $path;
}
}

8
lib/Slic3r/GCode.pm
View File

@ -114,7 +114,7 @@ sub extrude_loop {
# clip the path to avoid the extruder to get exactly on the first point of the loop;
# if polyline was shorter than the clipping distance we'd get a null polyline, so
# we discard it in that case
$extrusion_path->clip_end(($self->layer ? $self->layer->flow->scaled_width : $Slic3r::flow->scaled_width) * &Slic3r::LOOP_CLIPPING_LENGTH_OVER_WIDTH);
$extrusion_path->clip_end(scale $extrusion_path->flow_spacing * &Slic3r::LOOP_CLIPPING_LENGTH_OVER_SPACING);
return '' if !@{$extrusion_path->polyline};
# extrude along the path
@ -149,7 +149,7 @@ sub extrude_path {
my @lines = $self->last_path->lines;
my $last_line = $lines[-1];
if (points_coincide($last_line->[B], $self->last_pos)) {
my $point = Slic3r::Geometry::point_along_segment(@$last_line, $last_line->length + scale $self->layer->flow->spacing);
my $point = Slic3r::Geometry::point_along_segment(@$last_line, $last_line->length + scale $path->flow_spacing);
bless $point, 'Slic3r::Point';
$point->rotate(PI/6, $last_line->[B]);
$gcode .= $self->G0($point, undef, 0, "move inwards before travel");
@ -169,10 +169,10 @@ sub extrude_path {
my $area; # mm^3 of extrudate per mm of tool movement
if ($path->role == EXTR_ROLE_BRIDGE) {
my $s = $path->flow_spacing || $self->extruder->nozzle_diameter;
my $s = $path->flow_spacing;
$area = ($s**2) * PI/4;
} else {
my $s = $path->flow_spacing || ($self->layer ? $self->layer->flow->spacing : $Slic3r::flow->spacing);
my $s = $path->flow_spacing;
my $h = $path->height // $self->layer->height;
$area = $self->extruder->mm3_per_mm($s, $h);
}