bubnikv
8a8b49ea02
Removed CoolingBuffer.pm as it has been superseeded by the C++ code.
2017-02-27 01:51:08 +01:00
Alessandro Ranellucci
4a84643894
Fixed regression causing slowdown_below_layer_time to be ignored. #3515 #3443
2017-02-22 15:29:14 +01:00
Sebastianv650
b8ece2af06
Pressure advance overrides print speeds patch ( #3287 )
...
* Fix PressureRegulation.pm
Check if a pressure advance is needed even if speed is unchanged, but a discharge happened before. Restore print speed after advance / discharge. Solves #3282
2017-02-21 13:09:12 +01:00
Joseph Lenox
b022e51d94
Don't reset speed on flush moves (avoid use of uninitialized variable).
2017-02-21 13:02:16 +01:00
bubnikv
1fb57e439e
Defined the +-* operators on Pointf.
...
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
2016-10-21 16:53:42 +02:00
bubnikv
565146d9d1
Fix of a spiral vase with realtive extruder distances enabled.
...
The clone function is used by the SpiralVase.pm only, so the change
is safe.
2016-09-23 12:59:20 +02:00
bubnikv
b2a6f43923
Documented perl modules.
2016-09-13 11:24:55 +02:00
Chow Loong Jin
2e2e4e68d3
Fix layer time slowdown
...
The recent GCode writer changes which put the speed changes on a line of
their own have caused the layer time slowdown to be ignored by the regex
in CoolingBuffer.pm.
Fixes : #3134
2016-04-10 16:10:18 +08:00
Alessandro Ranellucci
3c862836f2
Refactored the Config XS bindings
2015-12-16 12:33:19 +01:00
Alessandro Ranellucci
3e739b87da
Finished porting Slic3r::GCode to XS (speed boost!)
2015-07-02 20:24:16 +02:00
Alessandro Ranellucci
801f629fdc
Ported Slic3r::GCode storage to XS
2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
580d28d071
Finished porting PlaceholderParser to XS
2015-07-01 19:35:22 +02:00
Alessandro Ranellucci
f361d8ad43
Ported PlaceholderParser::apply_env_variables() to XS
2015-07-01 17:56:38 +02:00
Alessandro Ranellucci
0f7933c4f9
Bugfix: pressure regulation accumulated too much retraction and didn't discharge at the end of print. Includes regression test. #2470
2015-01-06 00:35:39 +01:00
Alessandro Ranellucci
9ac60dca1a
Fixed vibration limit.
2014-12-21 12:39:19 +01:00
Alessandro Ranellucci
0d3c4a160f
Typo in Reader.pm #2033
2014-12-01 00:00:11 +01:00
Alessandro Ranellucci
98cb9f0e18
Refactoring: moved G-code export logic into new Slic3r::Print::GCode class. Removed Slic3r::GCode::Layer class. Fixes the order of post-processing filters so that cooling buffer is applied before any other filter whose logic is affected by speeds
2014-12-01 00:00:11 +01:00
Alessandro Ranellucci
43cbad8867
Minor fix to pressure management: support the case where speed is set before printing commands with a dedicated G1 Fx line
2014-11-24 18:32:18 +01:00
Alessandro Ranellucci
ff9b53260d
New experimental feature for pressure management. Credits to @llluis for the original implementation. #1203 #1677 #2018
2014-11-24 18:22:39 +01:00
Alessandro Ranellucci
5a382f0200
Bugfix: Slic3r::GCode::Reader did not parse correctly when use_relative_e_distances was enabled. #2033
2014-11-24 16:30:57 +01:00
Alessandro Ranellucci
2c64c3dd5b
Bugfix: spiral vase was not working when extrusion axis was not E. #2350
2014-11-23 18:59:18 +01:00
Alessandro Ranellucci
c1e26a70f8
Refactoring: move ooze prevention, wipe and avoid crossing perimeters into nested classes for better isolation
2014-11-23 15:13:40 +01:00
Alessandro Ranellucci
8b6a8e6307
Ported PlaceholderParser::update_timestamp() to XS
...
Note that Slic3r version number is now located in libslic3r.h
2014-11-09 20:41:43 +01:00
Alessandro Ranellucci
ee3fb7caa2
Ported GCodeWriter to XS (faster G-code export!)
2014-11-09 19:02:45 +01:00
Alessandro Ranellucci
fb2d84b5d3
Bugfix: double G10 and G11 commands were issued. #2320
2014-11-07 00:26:39 +01:00
Alessandro Ranellucci
30b0869595
Bugfix: crash when slicing one layer objects with sailfish G-code flavor. Includes regression test. #2335
2014-11-06 21:06:09 +01:00
Alessandro Ranellucci
268de5c8e5
More refactoring to GCode.pm: make writer() public and fix usage of Slic3r::GCode without a Slic3r::Layer object
2014-10-28 21:47:09 +01:00
Alessandro Ranellucci
e29569a2cd
Minor cleanup and refactoring in Slic3r::GCode
2014-10-25 11:00:08 +02:00
Alessandro Ranellucci
36c1a9d20c
Renamed shift_x and shift_y into origin
2014-10-25 10:56:21 +02:00
Alessandro Ranellucci
7f57f007cd
Refactoring: moved Slic3r::GCode::Base to Slic3r::GCode::Writer
2014-10-25 10:42:07 +02:00
Alessandro Ranellucci
167df0ab87
Refactoring: moved most of the low-level G-code to the Slic3r::GCode::Base class. Cleanup of the retraction and wipe logic.
2014-10-21 20:16:45 +02:00
Alessandro Ranellucci
33edda0a69
Moved Slic3r::GCode::Base to its own file
2014-10-18 17:59:52 +02:00
Alessandro Ranellucci
f8967418b9
Refactoring: moved the ooze prevention logic into a separate class with hooks
2014-10-18 17:58:14 +02:00
Alessandro Ranellucci
e521475b7e
Refactoring: moved some low-level G-code generation methods to the new Slic3r::GCode::Base class
2014-10-18 17:41:21 +02:00
Alessandro Ranellucci
380dd8adfc
Ported some methods to XS
2014-08-03 18:41:09 +02:00
Y. Sapir
a837e26f51
Translate PlaceholderParser::apply_config to C++.
2014-06-14 00:01:52 +02:00
Alessandro Ranellucci
b9de65e174
Removed warning
2014-06-13 16:18:00 +02:00
Alessandro Ranellucci
d9e7a50a6e
Partial work for background processing
2014-06-13 11:19:53 +02:00
Alessandro Ranellucci
5e80d7a388
Readd use strict and use warnings
2014-06-12 09:23:10 +02:00
Alessandro Ranellucci
3f6360ee8f
Finish porting Print classes to XS
2014-06-10 16:01:57 +02:00
Y. Sapir
8da0bded1d
Move Print object storage to C++. (along with its subobjects)
2014-05-24 23:50:29 +03:00
Alessandro Ranellucci
f2c5e799b1
Enforce seam alignment and blend in spiral vase. #2023
2014-05-22 12:28:12 +02:00
Alessandro Ranellucci
8ca352eb62
Separate speed option for support material interface. #2009
2014-05-21 15:21:20 +02:00
Alessandro Ranellucci
0ddcefe956
Use support material speed for skirt and brim instead of perimeter speed so that perimeter speed can be set on a per-region basis
2014-05-18 17:02:18 +02:00
Alessandro Ranellucci
dd1183f19a
Some fixed after the recent Slic3r::GCode refactoring
2014-05-15 15:54:16 +02:00
Alessandro Ranellucci
ee2c1c6127
Refactored the Slic3r::GCode logic for speeds
2014-05-13 08:34:21 +02:00
Alessandro Ranellucci
4680bbdfe2
Make sure spiral vase mode is not enabled for multi-island layers. #1938
2014-04-30 12:23:07 +02:00
Alessandro Ranellucci
7a9dec3720
One more change to multi-value placeholders: indices start from 0. #1899
2014-04-29 17:12:00 +02:00
Alessandro Ranellucci
a4b6075600
Fixed regression and ambiguity about multiple-value placeholders like [first_layer_temperature_1]. Includes several unit tests covering regression. #1899
2014-04-29 17:06:31 +02:00
Alessandro Ranellucci
6780e930cb
Update the [timestamp] placeholder(s) at every G-code export. #1957
2014-04-25 19:47:13 +02:00
