Alessandro Ranellucci
|
a821eb7f3c
|
More work to avoid working with vertices outside XS
|
2013-09-11 11:55:08 +02:00 |
|
Alessandro Ranellucci
|
11e18f681d
|
Incomplete work to store TriangleMesh objects in Model objects instead of extracting vertices and facets
|
2013-09-11 09:49:28 +02:00 |
|
Alessandro Ranellucci
|
78ee6e5d6d
|
Calls to ->repair where needed
|
2013-09-10 19:25:53 +02:00 |
|
Alessandro Ranellucci
|
566d38a472
|
Replace TriangleMesh with the XS port
|
2013-09-10 00:40:46 +02:00 |
|
Alessandro Ranellucci
|
5e34a9cf21
|
Make Repair() idempotent and lowercase
|
2013-09-09 23:18:33 +02:00 |
|
Alessandro Ranellucci
|
1b9d2e2ef8
|
Use the XS slicing code
|
2013-09-09 18:21:10 +02:00 |
|
Alessandro Ranellucci
|
873762491b
|
Fix a bad access after recent change about ->p returning objects by reference
|
2013-09-09 17:10:54 +02:00 |
|
Alessandro Ranellucci
|
5adb187dd2
|
More porting work
|
2013-09-07 21:08:53 +02:00 |
|
Alessandro Ranellucci
|
8607c559c7
|
Minor tidying
|
2013-09-07 00:42:56 +02:00 |
|
Alessandro Ranellucci
|
09684c67c2
|
Optimization: Remove useless calls to union()
|
2013-09-07 00:28:53 +02:00 |
|
Alessandro Ranellucci
|
10ab3bbb86
|
Fix Only infill where needed putting insufficient material. #1412
|
2013-09-07 00:02:58 +02:00 |
|
Alessandro Ranellucci
|
907ba55aab
|
Some minor fixes needed after the xsdata merge. #1421
|
2013-09-06 22:52:56 +02:00 |
|
Alessandro Ranellucci
|
f104659020
|
Optimization
|
2013-09-06 19:21:38 +02:00 |
|
Alessandro Ranellucci
|
4dd12b57a1
|
Fixed wipe (includes regression test). #1421
|
2013-09-06 19:14:06 +02:00 |
|
Alessandro Ranellucci
|
e02ae0d18a
|
Return Surface objects by reference from SurfaceCollection objects and fix a bug in XS code causing some shell options to be ignored
|
2013-09-06 18:36:38 +02:00 |
|
Alessandro Ranellucci
|
cb677c45de
|
Don't grow horizontal shells having acute angles. #1387
|
2013-09-06 17:43:40 +02:00 |
|
Alessandro Ranellucci
|
9484c377d9
|
Removed debugging line
|
2013-09-06 16:46:28 +02:00 |
|
Alessandro Ranellucci
|
a2cc54c9d0
|
Merge pull request #1424 from 4ZM/master
Changes to make slic3r build on Arch
|
2013-09-06 07:43:46 -07:00 |
|
Alessandro Ranellucci
|
2d3dae621a
|
Minor typos preventing correct positioning after recent XS merge
|
2013-09-05 14:23:31 +02:00 |
|
Anders Sundman
|
73878e0218
|
The 'use' prevented the build.
There is probably a reason for this line though.
|
2013-09-04 22:45:19 +02:00 |
|
Alessandro Ranellucci
|
67aefdccc7
|
Fixed --avoid-crossing-perimeters and --support-material after the xsdata merge
|
2013-09-04 00:10:53 +02:00 |
|
Alessandro Ranellucci
|
a49dc603cc
|
Many changes and fixes to remove leaks and return objects by reference
|
2013-09-03 19:26:58 +02:00 |
|
Alessandro Ranellucci
|
275422fac7
|
Don't return first_point() and last_point() by reference
|
2013-09-02 22:33:03 +02:00 |
|
Alessandro Ranellucci
|
0ffb0f6a58
|
Fix tests
|
2013-09-02 22:10:52 +02:00 |
|
Alessandro Ranellucci
|
c0789506e4
|
Return objects by reference instead of always cloning
|
2013-09-02 20:22:20 +02:00 |
|
Alessandro Ranellucci
|
1cfdf7e955
|
Ported Slic3r::Polyline::Collection
|
2013-08-30 00:06:10 +02:00 |
|
Alessandro Ranellucci
|
fb82de9aaf
|
Removed more unused code
|
2013-08-29 11:52:25 +02:00 |
|
Alessandro Ranellucci
|
649ef6ce79
|
Removed unused code
|
2013-08-29 11:48:58 +02:00 |
|
Alessandro Ranellucci
|
bd7b0e2aed
|
Ported ExtrusionPath::Collection->chained_path
|
2013-08-29 11:47:59 +02:00 |
|
Alessandro Ranellucci
|
ea1d138c95
|
Ported ExtrusionLoop->make_counter_clockwise()
|
2013-08-29 01:40:42 +02:00 |
|
Alessandro Ranellucci
|
5d6fd7f4d9
|
Optimizations for better usage of XS code
|
2013-08-29 01:36:42 +02:00 |
|
Alessandro Ranellucci
|
9254ff9704
|
Typo in merge
|
2013-08-28 20:43:23 +02:00 |
|
Alessandro Ranellucci
|
e19c6a1494
|
Ported Point->distance_to() and Line->length()
|
2013-08-28 20:41:41 +02:00 |
|
Alessandro Ranellucci
|
c9f68ed28a
|
Refactor E code and keep track of per-extruder consumend filament
|
2013-08-28 20:40:13 +02:00 |
|
Alessandro Ranellucci
|
70d824c9a7
|
One minor optimization in GCode.pm
|
2013-08-28 20:40:13 +02:00 |
|
Alessandro Ranellucci
|
5f17fa342b
|
Move arc fitting code to its own post-processing filter and remove the built-in ExtrusionPath::Arc class
|
2013-08-28 20:40:13 +02:00 |
|
Alessandro Ranellucci
|
055273fbc8
|
Huge speed boost by reducing the number of method calls in GCode.pm
|
2013-08-28 20:38:22 +02:00 |
|
Alessandro Ranellucci
|
73c05a6092
|
Moved vibration limit to its own G-code filter
|
2013-08-28 20:37:56 +02:00 |
|
Alessandro Ranellucci
|
fb763b0187
|
Removed dependency on Math::Clipper
|
2013-08-27 01:26:44 +02:00 |
|
Alessandro Ranellucci
|
b11b595c97
|
Ported nearest_point() and nearest_point_index()
|
2013-08-27 00:52:20 +02:00 |
|
Alessandro Ranellucci
|
f1e9216c70
|
Save some time in GCode.pm method calls
|
2013-08-27 00:02:24 +02:00 |
|
Alessandro Ranellucci
|
9fb14f2119
|
Ported (and used) ExtrusionPath->first_point
|
2013-08-26 23:42:00 +02:00 |
|
Alessandro Ranellucci
|
fe42427a54
|
Ported Polygon->is_valid() and ExPolygon->is_valid()
|
2013-08-26 23:27:51 +02:00 |
|
Alessandro Ranellucci
|
da0b85c0d9
|
Ported ExPolygon->contour and ExPolygon->holes
|
2013-08-26 23:09:18 +02:00 |
|
Alessandro Ranellucci
|
85011dfef3
|
Ported Surface->p
|
2013-08-26 23:03:00 +02:00 |
|
Alessandro Ranellucci
|
494ed5c5ad
|
Minor optimization (group offset_ex calls)
|
2013-08-26 22:54:06 +02:00 |
|
Alessandro Ranellucci
|
706851f836
|
Ported ExPolygon->area()
|
2013-08-26 22:50:26 +02:00 |
|
Alessandro Ranellucci
|
792fcba7be
|
Ported Polygon->area
|
2013-08-26 22:44:40 +02:00 |
|
Alessandro Ranellucci
|
1f734807b9
|
Ported Polygon->split_at()
|
2013-08-26 22:39:35 +02:00 |
|
Alessandro Ranellucci
|
9cf831b9c5
|
Ported union_pt() to XS
|
2013-08-26 18:37:19 +02:00 |
|
Alessandro Ranellucci
|
443d4e52cb
|
Fixed everything in the XS port
|
2013-08-26 17:58:37 +02:00 |
|
Alessandro Ranellucci
|
49040db9a3
|
Fixes to pass all tests
|
2013-08-26 16:25:42 +02:00 |
|
Alessandro Ranellucci
|
d786dd6c1c
|
Merge branch 'master' into xsdata
|
2013-08-25 22:34:03 +02:00 |
|
Alessandro Ranellucci
|
4bf08cbdec
|
Minor fix (still no thumbnail)
|
2013-08-25 22:33:50 +02:00 |
|
Alessandro Ranellucci
|
94a7d6b941
|
Validate config before launching the object settings dialog
|
2013-08-25 22:24:43 +02:00 |
|
Alessandro Ranellucci
|
fc9cec9d81
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print/Object.pm
|
2013-08-25 19:59:42 +02:00 |
|
Alessandro Ranellucci
|
026e0c06e4
|
Ability to customize how materials are mapped to extruders. #1020
|
2013-08-25 19:52:32 +02:00 |
|
Alessandro Ranellucci
|
cb0ee9729f
|
A couple fixes for Windows
|
2013-08-25 18:08:56 +02:00 |
|
Alessandro Ranellucci
|
ae9f13ed54
|
Minor fix to font size
|
2013-08-25 18:04:45 +02:00 |
|
Alessandro Ranellucci
|
ae21a45886
|
Distinct dialogs for 3D preview and object settings
|
2013-08-25 18:03:26 +02:00 |
|
Alessandro Ranellucci
|
b55d4a4e4b
|
Merge branch 'master' into plater2
|
2013-08-25 17:52:21 +02:00 |
|
Alessandro Ranellucci
|
e96d7b1d6a
|
Show facets, materials and manifoldness in info panel
|
2013-08-25 17:26:55 +02:00 |
|
Alessandro Ranellucci
|
fde6e371a9
|
Use multiple colors for multimaterial models in 3D preview
|
2013-08-25 16:35:21 +02:00 |
|
Alessandro Ranellucci
|
5b734f4a13
|
Merge branch 'master' into plater2
Conflicts:
lib/Slic3r/GUI/Plater.pm
|
2013-08-25 16:10:53 +02:00 |
|
Alessandro Ranellucci
|
2fb725405f
|
GUI fixes for Windows
|
2013-08-25 15:45:22 +02:00 |
|
Alessandro Ranellucci
|
3d6fb1b05c
|
New feature: ability to override specific settings for individual objects in the plater. #344
|
2013-08-25 14:37:50 +02:00 |
|
Alessandro Ranellucci
|
87b54ba2a0
|
Plater rearrange experiment
|
2013-08-25 12:22:05 +02:00 |
|
Alessandro Ranellucci
|
2dd6325bf8
|
Expose an Open button in the plater
|
2013-08-25 03:21:20 +02:00 |
|
Alessandro Ranellucci
|
945250c8c2
|
Show axes and ground
|
2013-08-25 02:58:50 +02:00 |
|
Alessandro Ranellucci
|
6f1fd51c2e
|
Keep objects vertical in 3D preview
|
2013-08-25 02:07:51 +02:00 |
|
Alessandro Ranellucci
|
097912755b
|
Fix handling of dirty models with overlapping facets, where some holes became filled because of wrong slice nesting
|
2013-08-19 16:53:54 +02:00 |
|
Alessandro Ranellucci
|
da1b6117df
|
Minor fix in debug code
|
2013-08-19 12:16:19 +02:00 |
|
Alessandro Ranellucci
|
94ca28644e
|
Ported union() to XS
|
2013-08-17 12:24:04 +02:00 |
|
Alessandro Ranellucci
|
fa07c512b4
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
|
2013-08-16 09:09:56 +02:00 |
|
Alessandro Ranellucci
|
314f377d7b
|
Debugging code
|
2013-08-13 20:17:17 +02:00 |
|
Alessandro Ranellucci
|
ef8ce1b5ba
|
Improvements to SVG debug tools: honor input order and support all colours
|
2013-08-13 10:34:49 +02:00 |
|
Alessandro Ranellucci
|
2b36778dc1
|
Fix a situation where extra perimeters prevented top shell to be fully propagated. #1387
|
2013-08-13 09:45:33 +02:00 |
|
Alessandro Ranellucci
|
36596bf569
|
Bugfix: alignment code for rectilinear infill caused lack of infill (regression in 948b43f). #1387
|
2013-08-12 20:27:25 +02:00 |
|
Alessandro Ranellucci
|
f1922ce7b3
|
Fix regression causing lack of contact infill
|
2013-08-12 19:19:22 +02:00 |
|
Alessandro Ranellucci
|
e5fe04ea7a
|
Make sure teeth are not too tight
|
2013-08-12 19:10:40 +02:00 |
|
Alessandro Ranellucci
|
9513fa7600
|
Enforce some horizontal margin between object and interface/support (contact not affected)
|
2013-08-12 18:55:11 +02:00 |
|
Alessandro Ranellucci
|
ca7d4163d7
|
Remove jitter and overlaps in interface infill
|
2013-08-12 18:45:03 +02:00 |
|
Alessandro Ranellucci
|
7062d028d2
|
Bugfix: top layers were not detected correctly, causing overlap of support material and object in some situations where there were contact regions having the same Z as some top regions
|
2013-08-12 18:12:53 +02:00 |
|
Alessandro Ranellucci
|
8d413eda44
|
Refactoring: generate interface and support in different cycles
|
2013-08-11 19:25:51 +02:00 |
|
Alessandro Ranellucci
|
5f07d39509
|
Reapply perimeter only to support
|
2013-08-10 21:30:50 +02:00 |
|
Alessandro Ranellucci
|
5380b6cb33
|
Incomplete work to improve support material by avoiding thin columns and making sure everything is supported correctly
|
2013-08-10 19:39:35 +02:00 |
|
Alessandro Ranellucci
|
abb5d1256f
|
Added some debugging code
|
2013-08-09 21:27:57 +02:00 |
|
Alessandro Ranellucci
|
4862d832b5
|
Simplify layer change code now that we have distinct support layers
|
2013-08-09 19:46:20 +02:00 |
|
Alessandro Ranellucci
|
548b301432
|
Offset projection of facets before the final union
|
2013-08-09 16:34:55 +02:00 |
|
Alessandro Ranellucci
|
b956faa153
|
Adapt avoid_crossing_perimeters code to the recent changes
|
2013-08-09 16:30:40 +02:00 |
|
Alessandro Ranellucci
|
3751e3813c
|
Fix regression causing too much collapsing of infill regions
|
2013-08-09 16:18:21 +02:00 |
|
Alessandro Ranellucci
|
5d80c26b29
|
Adjust collision detection for brim and include support islands inside the only_retract_when_crossing_perimeters logic
|
2013-08-09 15:04:14 +02:00 |
|
Alessandro Ranellucci
|
67f5b7ab14
|
Require --default-acceleration when other acceleration settings are used
|
2013-08-09 14:33:20 +02:00 |
|
Alessandro Ranellucci
|
99816e07a6
|
New --first-layer-acceleration option
|
2013-08-09 14:30:43 +02:00 |
|
Alessandro Ranellucci
|
cde662cb51
|
Fix collision detection for brim
|
2013-08-09 14:22:41 +02:00 |
|
Alessandro Ranellucci
|
3427b29a93
|
Fix wrong slices when many overlapping facets were present in the model
|
2013-08-08 16:27:41 +02:00 |
|
Alessandro Ranellucci
|
f6569cf359
|
Minor error causing support material to fail when first_layer_height was expressed in % (caught by regression test). #1371
|
2013-08-08 14:41:23 +02:00 |
|
Alessandro Ranellucci
|
b38cc2c244
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r.pm
lib/Slic3r/ExPolygon.pm
lib/Slic3r/Fill.pm
lib/Slic3r/Fill/Rectilinear.pm
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Geometry/Clipper.pm
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
lib/Slic3r/TriangleMesh.pm
t/shells.t
xs/MANIFEST
|
2013-08-08 02:10:34 +02:00 |
|
Alessandro Ranellucci
|
4438aec12c
|
Revert "Remove thumbnail simplification because it caused loss of very thin parts. #1327"
This reverts commit 1210b89893.
Conflicts:
lib/Slic3r/GUI/Plater.pm
|
2013-08-05 20:48:09 +02:00 |
|
Alessandro Ranellucci
|
0ce7ebc4b8
|
Integerize plater thumbnails
|
2013-08-05 20:21:08 +02:00 |
|
Alessandro Ranellucci
|
d8e2cde962
|
Avoid problems caused in support material by layer heights being specified in configuration without the leading 0 (like .25). #1366
|
2013-07-31 23:44:17 +02:00 |
|
Alessandro Ranellucci
|
528595c7f7
|
Automatically ignore per-role extruders if they're not configured in Printer Settings (only in GUI expert mode) - CLI mode continues to autogenerate extruder settings. #1236
|
2013-07-31 20:43:19 +02:00 |
|
Alessandro Ranellucci
|
d83b14655a
|
Better tooltip for raft layers
|
2013-07-31 20:02:24 +02:00 |
|
Alessandro Ranellucci
|
6ddeb2fa07
|
Initialize support material interface extruder explicitely. #1364
|
2013-07-31 19:52:25 +02:00 |
|
Alessandro Ranellucci
|
415a2d165a
|
Cleaner code for first layer temperatures
|
2013-07-31 18:55:23 +02:00 |
|
Alessandro Ranellucci
|
60e5e2166a
|
Include support contact layers in skirt/brim generation
|
2013-07-31 16:29:44 +02:00 |
|
Alessandro Ranellucci
|
3b47e1a492
|
New --info option to show file info (size, volume, repair stats). Removed utils/file_info.pl
|
2013-07-31 15:10:11 +02:00 |
|
Alessandro Ranellucci
|
1b4878f305
|
Fix hang in new support material caused by numerical approximation leaving small polygons, as usual
|
2013-07-30 15:44:08 +02:00 |
|
Alessandro Ranellucci
|
4e13d61aed
|
Fix retraction/Z/lift problems after recent changes
|
2013-07-30 12:15:40 +02:00 |
|
Alessandro Ranellucci
|
913f401280
|
Merge new-support2
|
2013-07-29 20:50:26 +02:00 |
|
Alessandro Ranellucci
|
a2cc230bb5
|
Add note about a bug caused by the disabled optimization about splitting meshes before avoid_crossing_perimeters. #1315
|
2013-07-29 19:50:47 +02:00 |
|
Alessandro Ranellucci
|
10a8f479f9
|
Bugfix: lift was not working correctly with multiple extruders and multiple skirt layers. Also, we now ignore all lift settings except the one of the first extruder. Includes regression tests. #1332 #1338
|
2013-07-29 19:43:57 +02:00 |
|
Alessandro Ranellucci
|
b5907dc734
|
Bugfix: z_offset was not applied in spiral_vase. Includes regression test #1343
|
2013-07-29 17:28:30 +02:00 |
|
Alessandro Ranellucci
|
1210b89893
|
Remove thumbnail simplification because it caused loss of very thin parts. #1327
|
2013-07-29 16:43:48 +02:00 |
|
Alessandro Ranellucci
|
dc766f9f73
|
Bugfix: the tangent edge removal algorithm was refactored the wrong way and wasn't used anymore
|
2013-07-29 14:56:37 +02:00 |
|
Alessandro Ranellucci
|
8fe38d9b71
|
Bugfix: fatal error when failed loops were included in slices. #1358
|
2013-07-29 14:17:36 +02:00 |
|
Alessandro Ranellucci
|
9adac636b8
|
Avoid G92 E0 with sailfish. #1034
|
2013-07-29 14:17:30 +02:00 |
|
Alessandro Ranellucci
|
80676f358a
|
Keep edge lines in rectilinear infill even when the sides are not perfectly straight
|
2013-07-29 13:36:22 +02:00 |
|
Alessandro Ranellucci
|
2a2d15e422
|
Fix error after recent change about bridges
|
2013-07-29 12:15:30 +02:00 |
|
Alessandro Ranellucci
|
1f36406a62
|
Bugfix: thin bridge anchors were ignored. #304
|
2013-07-29 11:54:32 +02:00 |
|
Alessandro Ranellucci
|
948b43fe0d
|
Don't try to align rectilinear infill if solid, otherwise there will be a gap at one side
|
2013-07-29 11:05:04 +02:00 |
|
Alessandro Ranellucci
|
51de3ce14f
|
Switch print_z to unscaled coordinates
|
2013-07-29 00:27:53 +02:00 |
|
Alessandro Ranellucci
|
3bcb2f04ed
|
Add spiral vase test for hollow models
|
2013-07-28 15:02:03 +02:00 |
|
Alessandro Ranellucci
|
91cade7e8f
|
Make sure there are no gaps in spiral vase. Includes regression test. #1251
|
2013-07-28 13:39:15 +02:00 |
|
Alessandro Ranellucci
|
691c45d57f
|
Smarter handling of hollow prints. Optimization included
|
2013-07-28 10:56:41 +02:00 |
|
Alessandro Ranellucci
|
25af3eb35f
|
Proper fix for preventing shells to propagate too much
|
2013-07-27 19:41:36 +02:00 |
|
Alessandro Ranellucci
|
6bd4803612
|
Failing test case about spurious infill in hollow objects, caused by shells being correctly generated even for hollow objects - however sometimes we don't want that
|
2013-07-26 20:17:33 +02:00 |
|
Alessandro Ranellucci
|
0a8872ca6c
|
Extend utils/dump-stl.pl to also write STL files
|
2013-07-26 19:25:15 +02:00 |
|
Alessandro Ranellucci
|
debe540018
|
Better name for wipe
|
2013-07-26 16:23:43 +02:00 |
|
Alessandro Ranellucci
|
aa194c8125
|
Fix little regression causing object height not to be updated when object in plater was scaled
|
2013-07-26 14:30:00 +02:00 |
|
Alessandro Ranellucci
|
c1c1416838
|
Scale layer height ranges too when scaling object in plater. #1284
|
2013-07-26 14:26:59 +02:00 |
|
Alessandro Ranellucci
|
a145f1b6aa
|
Don't merge adjacent bridges so that more correct angles can be detected for each one
|
2013-07-26 12:31:44 +02:00 |
|
Alessandro Ranellucci
|
c69edf27e9
|
Bugfix: only_retract_when_crossing_perimeters was not triggering retraction when moving between islands that are covered/bridged on the above layer. #1308
|
2013-07-26 10:52:22 +02:00 |
|
Alessandro Ranellucci
|
37bf0fa53b
|
Bugfix: medial axis thin wall detection was triggered when not needed
|
2013-07-26 00:13:24 +02:00 |
|
Alessandro Ranellucci
|
8fe228fcee
|
Smarter ordering of gap fill
|
2013-07-26 00:03:28 +02:00 |
|
Alessandro Ranellucci
|
2b8662cf0c
|
Temporary workarond for an upstream bug in Moo which causes failure when running with threads. #1330
|
2013-07-24 10:06:02 +02:00 |
|
Alessandro Ranellucci
|
7ad291ea64
|
Add ZTable to thread_cleanup()
|
2013-07-23 23:20:18 +02:00 |
|
Alessandro Ranellucci
|
aa2ad3bbd2
|
Fix garbage collection of shared data. #1348
|
2013-07-23 23:18:22 +02:00 |
|
Alessandro Ranellucci
|
b1147861dd
|
Implement lower_bound() and upper_bound() methods for ZTable
|
2013-07-20 21:19:59 +02:00 |
|
Alessandro Ranellucci
|
e29aca3553
|
Reapply correct optimization for simplifiying fill_surfaces before performing the offset. #1325
|
2013-07-20 12:22:41 +02:00 |
|
Alessandro Ranellucci
|
1b285f3f46
|
Thread-safe integration of ExtrusionPath::Collection
|
2013-07-18 22:29:12 +02:00 |
|
Alessandro Ranellucci
|
c030e38908
|
Ported ExtrusionPath::Collection
|
2013-07-18 19:09:07 +02:00 |
|
Alessandro Ranellucci
|
0efea9e442
|
Ported diff() and intersection()
|
2013-07-17 01:21:30 +02:00 |
|
Alessandro Ranellucci
|
c7b6818ccf
|
Ported offset() and offset2()
|
2013-07-17 00:48:29 +02:00 |
|
Alessandro Ranellucci
|
bf8c799685
|
Ported diff_ex, intersection_ex, union_ex, xor_ex
|
2013-07-17 00:29:09 +02:00 |
|
Alessandro Ranellucci
|
f7ada2b5db
|
Ported make_clockwise() and make_counter_clockwise()
|
2013-07-16 21:09:29 +02:00 |
|
Alessandro Ranellucci
|
fe061b19ad
|
Ported Polygon->is_counter_clockwise() and rearranged code in .cpp files
|
2013-07-16 21:04:14 +02:00 |
|
Alessandro Ranellucci
|
79db996696
|
Ported diff_ex() to XS
|
2013-07-16 20:29:15 +02:00 |
|
Alessandro Ranellucci
|
898007fc36
|
Port offset_ex() and offset2_ex() to XS
|
2013-07-16 20:09:53 +02:00 |
|
Alessandro Ranellucci
|
9458c7db97
|
Fix integration of XS containers
|
2013-07-16 17:13:01 +02:00 |
|