Alessandro Ranellucci
|
5f88135074
|
Adjust XY distance of the contact loop
|
2014-05-02 10:49:14 +02:00 |
|
Alessandro Ranellucci
|
4311f30739
|
Fixed one typo in BridgeDetector and some improvements to support material
|
2014-05-01 19:11:53 +02:00 |
|
Alessandro Ranellucci
|
010b71e9d4
|
Improvements to avoid numerical issues in bridge detection and bridge exclusion
|
2014-04-30 15:16:15 +02:00 |
|
Alessandro Ranellucci
|
8ded268e7e
|
Take into account that $layerm->perimeters also contains ExtrusionPath objects. #1991
|
2014-04-30 10:47:31 +02:00 |
|
Alessandro Ranellucci
|
1667d1826d
|
Put continuous base flange under pillars support material
|
2014-04-30 01:51:19 +02:00 |
|
Alessandro Ranellucci
|
1d10cd3da6
|
Also remove bridged perimeters area from support material
|
2014-04-30 01:20:18 +02:00 |
|
Alessandro Ranellucci
|
3e3cc4171c
|
TODO about bridges and support material
|
2014-04-29 23:40:52 +02:00 |
|
Alessandro Ranellucci
|
ef2296dc8d
|
Make sure interface and base generation honor the gap between support material and object
|
2014-04-29 23:29:52 +02:00 |
|
Alessandro Ranellucci
|
98e40d3fe4
|
Store width and height in ExtrusionEntity objects for debugging purposes
|
2014-04-29 23:16:16 +02:00 |
|
Alessandro Ranellucci
|
a31b2e6ca2
|
Stricter implementation of the overhang detection. Includes unit tests
|
2014-04-29 19:58:58 +02:00 |
|
Alessandro Ranellucci
|
ce9cf4d964
|
Don't put supports under bridges and potential bridges
|
2014-04-26 17:19:50 +02:00 |
|
Alessandro Ranellucci
|
148c773319
|
Exclude support from bridged areas
|
2014-04-26 16:07:43 +02:00 |
|
Alessandro Ranellucci
|
9ee3868f92
|
Removed debugging line left
|
2014-04-25 20:05:08 +02:00 |
|
Alessandro Ranellucci
|
7ac0095018
|
Fix regression causing default extrusion width to be ignored. #1958
|
2014-04-25 19:39:27 +02:00 |
|
Alessandro Ranellucci
|
fe1691c151
|
New --cut feature
|
2014-04-25 10:20:30 +02:00 |
|
Alessandro Ranellucci
|
f6e99f1467
|
Bugfix: [filament_preset] was not replaced in filename when using Quick Slice. #1870
|
2014-04-19 12:10:15 +02:00 |
|
Alessandro Ranellucci
|
62e19469bc
|
Fixed regression in --infill-only-where-needed. Includes a minimal test suite for such feature. #1871
Conflicts:
t/fill.t
|
2014-04-18 21:48:32 +02:00 |
|
Alessandro Ranellucci
|
93a7d87fc6
|
Bugfix: pillars support material crashed when no overhangs were detected
|
2014-04-07 16:59:22 +02:00 |
|
Alessandro Ranellucci
|
20df1023a6
|
Fixed broken command line scaling. Regression test was in previous commit. #1889
|
2014-04-05 11:22:05 +02:00 |
|
Alessandro Ranellucci
|
d6d6a51e0d
|
Fix for incomplete extrusion on solid surfaces
|
2014-04-05 10:54:24 +02:00 |
|
Alessandro Ranellucci
|
45559f87f3
|
Save the vector used for aligning object volumes to origin and apply it to additional parts added from the object part panel in order to make them coincide
|
2014-04-02 20:23:26 +02:00 |
|
Alessandro Ranellucci
|
432a87e73d
|
New option for forcing the generation of interface shells. #1847
|
2014-03-25 01:11:28 +01:00 |
|
Alessandro Ranellucci
|
ea3266c6e9
|
Fix modifiers
|
2014-03-23 16:56:41 +01:00 |
|
Alessandro Ranellucci
|
fec41d6dfd
|
Update plater and print upon changing object parts and their settings
|
2014-03-23 16:45:55 +01:00 |
|
Alessandro Ranellucci
|
6a157c22c2
|
Fixed minor fatal error
|
2014-03-22 17:44:42 +01:00 |
|
Alessandro Ranellucci
|
7421a7bf63
|
Turn fill_density into percentage
|
2014-03-22 16:23:33 +01:00 |
|
Alessandro Ranellucci
|
e837183327
|
Fixed regression when using --infill-only-where-needed. Includes regression test. #1721
|
2014-02-16 12:48:07 +01:00 |
|
Alessandro Ranellucci
|
ffc891d885
|
Bugfix: when processing with fill_density = 0, top/bottom solid shells were missing regions thinner than 3 * extrusion width. Includes regression test. #1602
Conflicts:
lib/Slic3r/Print/Object.pm
t/fill.t
|
2014-02-07 02:07:21 +01:00 |
|
Alessandro Ranellucci
|
89d3dbaa5a
|
Bugfix: incorrect number of raft layers was generated when too few were requested. #1678
Conflicts:
lib/Slic3r/Print/Object.pm
|
2014-01-11 23:26:48 +01:00 |
|
Alessandro Ranellucci
|
ea173cf815
|
Bugfix: ambiguous semantics of the layers_count() method caused M73 to go beyond 100%. #1670
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
|
2014-01-11 17:40:09 +01:00 |
|
Alessandro Ranellucci
|
c8a48b4527
|
Implement modifier volumes and port _merge_loops() to XS
|
2014-01-07 15:40:38 +01:00 |
|
Alessandro Ranellucci
|
b17d06f9d1
|
Finished porting BoundingBox to XS
|
2014-01-07 12:48:09 +01:00 |
|
Alessandro Ranellucci
|
3e93a14912
|
New support material pattern: pillars!
|
2014-01-05 16:51:16 +01:00 |
|
Alessandro Ranellucci
|
07b9b12475
|
Make tests pass
|
2014-01-05 00:36:33 +01:00 |
|
Alessandro Ranellucci
|
a2cbb261cb
|
More work for refactoring Flow/Extruder
|
2014-01-03 20:02:00 +01:00 |
|
Alessandro Ranellucci
|
8ed738d3f7
|
More incomplete work for Flow/Extruder refactoring
|
2014-01-03 18:27:46 +01:00 |
|
Alessandro Ranellucci
|
52ce6e4a7b
|
Some initial work for refactoring Print->extruders
|
2014-01-03 10:44:36 +01:00 |
|
Alessandro Ranellucci
|
b9793b3f12
|
Moved first_layer_extrusion_width to PrintConfig
|
2014-01-03 00:34:30 +01:00 |
|
Alessandro Ranellucci
|
bfa2ee2770
|
Remove scale, rotate, duplicate, duplicate_grid from config (but leave them in CLI)
|
2014-01-02 18:01:21 +01:00 |
|
Alessandro Ranellucci
|
385e0e0974
|
Refactoring: new Slic3r::Print::Simple class for non-interactive slicing (used in CLI and Quick Slice)
|
2014-01-02 17:54:18 +01:00 |
|
Alessandro Ranellucci
|
5bf0942f45
|
Satisfy test suite and CLI
|
2014-01-02 17:24:23 +01:00 |
|
Alessandro Ranellucci
|
e2f1040a76
|
More work
|
2014-01-02 10:44:54 +01:00 |
|
Alessandro Ranellucci
|
0883d0f4eb
|
More work here and there
|
2014-01-01 17:29:15 +01:00 |
|
Alessandro Ranellucci
|
83326845dd
|
More incomplete work
|
2013-12-31 14:33:03 +01:00 |
|
Alessandro Ranellucci
|
beb1baa096
|
Incomplete work for refactoring regions and flows
|
2013-12-30 18:28:41 +01:00 |
|
Alessandro Ranellucci
|
1157a7f859
|
Remove package variable $Slic3r::Config
|
2013-12-24 11:29:31 +01:00 |
|
Alessandro Ranellucci
|
20f1f3d2b4
|
Fix regression preventing raft from being generated for the entire object footprint. #1614 #1567
|
2013-12-23 20:31:50 +01:00 |
|
Alessandro Ranellucci
|
1b9079ffbe
|
Merge branch 'xs-model'
|
2013-12-20 01:41:13 +01:00 |
|
Alessandro Ranellucci
|
a6a6a6888b
|
Ported Slic3r::Print::State to XS
|
2013-12-20 01:36:42 +01:00 |
|
Alessandro Ranellucci
|
d2295cdf70
|
New Slic3r::Print::State class
|
2013-12-19 18:54:24 +01:00 |
|
Alessandro Ranellucci
|
685e8e4dfa
|
More work for step-based slicing
|
2013-12-19 15:23:10 +01:00 |
|
Alessandro Ranellucci
|
38ea5f79d7
|
Merge branch 'xs-model'
|
2013-12-18 19:20:23 +01:00 |
|
Alessandro Ranellucci
|
15235699e4
|
Completed adapting plater behavior to new Print object API
|
2013-12-18 18:54:11 +01:00 |
|
Alessandro Ranellucci
|
916a0a0e58
|
Fix compilation and test suite
|
2013-12-18 16:34:31 +01:00 |
|
Alessandro Ranellucci
|
a12b1765d6
|
Fixed wrong commit f495136. Thanks pdbogen for the report. #1623
|
2013-12-18 10:21:17 +01:00 |
|
Alessandro Ranellucci
|
0591eecab7
|
Lazy mesh generation so that we only keep it in model object
|
2013-12-18 00:13:41 +01:00 |
|
Alessandro Ranellucci
|
f4951367ea
|
Fixed fatal error about missing method thin_walls(). #1607 #1615
|
2013-12-17 16:17:15 +01:00 |
|
Alessandro Ranellucci
|
250608aa52
|
Move centering outside the Print object
|
2013-12-15 16:17:12 +01:00 |
|
Alessandro Ranellucci
|
2eff7c238e
|
Some initial work for stateful Print object
|
2013-12-13 14:02:01 +01:00 |
|
Alessandro Ranellucci
|
5470fbbebc
|
Make quick_slice() work with new model handling
|
2013-12-13 12:18:30 +01:00 |
|
Alessandro Ranellucci
|
0e8a0ef1ca
|
Refactoring. Use Model class for representing the plate in GUI
|
2013-12-12 20:19:33 +01:00 |
|
Alessandro Ranellucci
|
57fd6ad563
|
Removed dependency on ->object from Region.pm
|
2013-11-26 18:46:48 +01:00 |
|
Alessandro Ranellucci
|
0045f84ed2
|
Removed chained_path_points()
|
2013-11-23 21:42:01 +01:00 |
|
Alessandro Ranellucci
|
e75dbf37fa
|
Never scale TriangleMesh objects
|
2013-11-23 19:25:33 +01:00 |
|
Alessandro Ranellucci
|
a331f4d27a
|
Finished porting group() to XS
|
2013-11-23 18:15:59 +01:00 |
|
Alessandro Ranellucci
|
7475762a27
|
Remove residual uses of Boost for line clipping
|
2013-11-21 18:47:25 +01:00 |
|
Alessandro Ranellucci
|
c5f7318fc9
|
Removed debugging statement
|
2013-11-20 15:38:51 +01:00 |
|
Alessandro Ranellucci
|
50c0081d25
|
Update Clipper to 6.0.0
|
2013-11-20 11:35:58 +01:00 |
|
Alessandro Ranellucci
|
ab3e5b5a2c
|
No support when --support-material-interface-layers was set to 1. #1515
|
2013-11-14 18:13:57 +01:00 |
|
Alessandro Ranellucci
|
885ab5844e
|
Ported regular_points() to XS and renamed it to equally_spaced_points()
|
2013-11-11 20:59:58 +01:00 |
|
Alessandro Ranellucci
|
6bb425e88d
|
Minor fix about raft and support after previous commit
|
2013-11-11 20:50:22 +01:00 |
|
Alessandro Ranellucci
|
9f41f0279e
|
Some work to reduce recursive dependencies between classes
|
2013-11-11 20:37:06 +01:00 |
|
Alessandro Ranellucci
|
f491b7ba71
|
Fix t/support.t
|
2013-11-02 11:32:23 +01:00 |
|
Alessandro Ranellucci
|
3f7adfc07d
|
Fix raft_layers according to the new support material logic
|
2013-11-02 11:16:44 +01:00 |
|
Alessandro Ranellucci
|
ff25cc97fa
|
Explicitely clip support material with object slices (test case from #1397)
|
2013-10-27 23:20:06 +01:00 |
|
Alessandro Ranellucci
|
a99d34a91a
|
Bad memory access in regular_points()
|
2013-10-27 20:55:55 +01:00 |
|
Alessandro Ranellucci
|
58d92ac36a
|
Support interface_layers == 0
|
2013-10-27 18:54:52 +01:00 |
|
Alessandro Ranellucci
|
0e3c9ebe52
|
Extend interface into base support when the latter is contained in a hole (for better interface anchoring) and fix contact loops when object is enclosed in a hole
|
2013-10-27 16:37:04 +01:00 |
|
Alessandro Ranellucci
|
4cba5111a3
|
Fix generation of contact loops
|
2013-10-27 15:22:44 +01:00 |
|
Alessandro Ranellucci
|
28e9682d0e
|
Several changes to support material, including a fix to prevent vertical overlapping and horizontal fusion of support and object
|
2013-10-27 10:19:26 +01:00 |
|
Alessandro Ranellucci
|
c08d4cc798
|
Fixed support unit tests and reduced dependency on $object
|
2013-10-26 17:56:59 +02:00 |
|
Alessandro Ranellucci
|
bdf825d078
|
Refactoring: split support material code into several methods
|
2013-10-26 17:20:54 +02:00 |
|
Mark Hindess
|
f523c095b1
|
Trivial fix for support-related undefined sub errors.
|
2013-09-24 09:54:23 +01:00 |
|
Alessandro Ranellucci
|
197cd8e68b
|
Typo
|
2013-09-19 16:09:47 +02:00 |
|
Alessandro Ranellucci
|
ed529b62f3
|
Fix threading issue with GUI. #1443 #1444
|
2013-09-19 16:00:47 +02:00 |
|
Alessandro Ranellucci
|
4fe0675380
|
Removed ZTable code
|
2013-09-17 23:55:38 +02:00 |
|
Alessandro Ranellucci
|
a7989e382c
|
Bugfix: enabling raft layers generated support for the whole model. Includes regression test. #1375
|
2013-09-17 23:51:30 +02:00 |
|
Alessandro Ranellucci
|
e8323fc339
|
Move support material code to its own class
|
2013-09-17 23:27:57 +02:00 |
|
Alessandro Ranellucci
|
6adce9f66b
|
Update support material code to use shared memory
|
2013-09-17 23:14:49 +02:00 |
|
Alessandro Ranellucci
|
ea0e136b45
|
Prevent superfluous extra perimeters added when a region has an acute angle
|
2013-09-17 20:18:54 +02:00 |
|
Alessandro Ranellucci
|
39449f9245
|
Revert a recent change made to shells generation, causing too much solid infill. Includes regression test. #1431
|
2013-09-17 19:24:16 +02:00 |
|
Alessandro Ranellucci
|
c7db2cb10f
|
Prune tiny shells to avoid random extra internal solid infill. #1431
|
2013-09-16 12:36:04 +02:00 |
|
Alessandro Ranellucci
|
a821eb7f3c
|
More work to avoid working with vertices outside XS
|
2013-09-11 11:55:08 +02:00 |
|
Alessandro Ranellucci
|
566d38a472
|
Replace TriangleMesh with the XS port
|
2013-09-10 00:40:46 +02:00 |
|
Alessandro Ranellucci
|
5e34a9cf21
|
Make Repair() idempotent and lowercase
|
2013-09-09 23:18:33 +02:00 |
|
Alessandro Ranellucci
|
1b9d2e2ef8
|
Use the XS slicing code
|
2013-09-09 18:21:10 +02:00 |
|
Alessandro Ranellucci
|
873762491b
|
Fix a bad access after recent change about ->p returning objects by reference
|
2013-09-09 17:10:54 +02:00 |
|
Alessandro Ranellucci
|
8607c559c7
|
Minor tidying
|
2013-09-07 00:42:56 +02:00 |
|
Alessandro Ranellucci
|
09684c67c2
|
Optimization: Remove useless calls to union()
|
2013-09-07 00:28:53 +02:00 |
|
Alessandro Ranellucci
|
10ab3bbb86
|
Fix Only infill where needed putting insufficient material. #1412
|
2013-09-07 00:02:58 +02:00 |
|
Alessandro Ranellucci
|
907ba55aab
|
Some minor fixes needed after the xsdata merge. #1421
|
2013-09-06 22:52:56 +02:00 |
|
Alessandro Ranellucci
|
f104659020
|
Optimization
|
2013-09-06 19:21:38 +02:00 |
|
Alessandro Ranellucci
|
e02ae0d18a
|
Return Surface objects by reference from SurfaceCollection objects and fix a bug in XS code causing some shell options to be ignored
|
2013-09-06 18:36:38 +02:00 |
|
Alessandro Ranellucci
|
cb677c45de
|
Don't grow horizontal shells having acute angles. #1387
|
2013-09-06 17:43:40 +02:00 |
|
Alessandro Ranellucci
|
67aefdccc7
|
Fixed --avoid-crossing-perimeters and --support-material after the xsdata merge
|
2013-09-04 00:10:53 +02:00 |
|
Alessandro Ranellucci
|
a49dc603cc
|
Many changes and fixes to remove leaks and return objects by reference
|
2013-09-03 19:26:58 +02:00 |
|
Alessandro Ranellucci
|
fb763b0187
|
Removed dependency on Math::Clipper
|
2013-08-27 01:26:44 +02:00 |
|
Alessandro Ranellucci
|
fe42427a54
|
Ported Polygon->is_valid() and ExPolygon->is_valid()
|
2013-08-26 23:27:51 +02:00 |
|
Alessandro Ranellucci
|
da0b85c0d9
|
Ported ExPolygon->contour and ExPolygon->holes
|
2013-08-26 23:09:18 +02:00 |
|
Alessandro Ranellucci
|
494ed5c5ad
|
Minor optimization (group offset_ex calls)
|
2013-08-26 22:54:06 +02:00 |
|
Alessandro Ranellucci
|
fc9cec9d81
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print/Object.pm
|
2013-08-25 19:59:42 +02:00 |
|
Alessandro Ranellucci
|
026e0c06e4
|
Ability to customize how materials are mapped to extruders. #1020
|
2013-08-25 19:52:32 +02:00 |
|
Alessandro Ranellucci
|
3d6fb1b05c
|
New feature: ability to override specific settings for individual objects in the plater. #344
|
2013-08-25 14:37:50 +02:00 |
|
Alessandro Ranellucci
|
fa07c512b4
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
|
2013-08-16 09:09:56 +02:00 |
|
Alessandro Ranellucci
|
2b36778dc1
|
Fix a situation where extra perimeters prevented top shell to be fully propagated. #1387
|
2013-08-13 09:45:33 +02:00 |
|
Alessandro Ranellucci
|
f1922ce7b3
|
Fix regression causing lack of contact infill
|
2013-08-12 19:19:22 +02:00 |
|
Alessandro Ranellucci
|
e5fe04ea7a
|
Make sure teeth are not too tight
|
2013-08-12 19:10:40 +02:00 |
|
Alessandro Ranellucci
|
9513fa7600
|
Enforce some horizontal margin between object and interface/support (contact not affected)
|
2013-08-12 18:55:11 +02:00 |
|
Alessandro Ranellucci
|
ca7d4163d7
|
Remove jitter and overlaps in interface infill
|
2013-08-12 18:45:03 +02:00 |
|
Alessandro Ranellucci
|
7062d028d2
|
Bugfix: top layers were not detected correctly, causing overlap of support material and object in some situations where there were contact regions having the same Z as some top regions
|
2013-08-12 18:12:53 +02:00 |
|
Alessandro Ranellucci
|
8d413eda44
|
Refactoring: generate interface and support in different cycles
|
2013-08-11 19:25:51 +02:00 |
|
Alessandro Ranellucci
|
5f07d39509
|
Reapply perimeter only to support
|
2013-08-10 21:30:50 +02:00 |
|
Alessandro Ranellucci
|
5380b6cb33
|
Incomplete work to improve support material by avoiding thin columns and making sure everything is supported correctly
|
2013-08-10 19:39:35 +02:00 |
|
Alessandro Ranellucci
|
abb5d1256f
|
Added some debugging code
|
2013-08-09 21:27:57 +02:00 |
|
Alessandro Ranellucci
|
5d80c26b29
|
Adjust collision detection for brim and include support islands inside the only_retract_when_crossing_perimeters logic
|
2013-08-09 15:04:14 +02:00 |
|
Alessandro Ranellucci
|
f6569cf359
|
Minor error causing support material to fail when first_layer_height was expressed in % (caught by regression test). #1371
|
2013-08-08 14:41:23 +02:00 |
|
Alessandro Ranellucci
|
b38cc2c244
|
Merge branch 'master' into xsdata
Conflicts:
lib/Slic3r.pm
lib/Slic3r/ExPolygon.pm
lib/Slic3r/Fill.pm
lib/Slic3r/Fill/Rectilinear.pm
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Geometry/Clipper.pm
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
lib/Slic3r/TriangleMesh.pm
t/shells.t
xs/MANIFEST
|
2013-08-08 02:10:34 +02:00 |
|
Alessandro Ranellucci
|
d8e2cde962
|
Avoid problems caused in support material by layer heights being specified in configuration without the leading 0 (like .25). #1366
|
2013-07-31 23:44:17 +02:00 |
|
Alessandro Ranellucci
|
1b4878f305
|
Fix hang in new support material caused by numerical approximation leaving small polygons, as usual
|
2013-07-30 15:44:08 +02:00 |
|
Alessandro Ranellucci
|
913f401280
|
Merge new-support2
|
2013-07-29 20:50:26 +02:00 |
|
Alessandro Ranellucci
|
51de3ce14f
|
Switch print_z to unscaled coordinates
|
2013-07-29 00:27:53 +02:00 |
|
Alessandro Ranellucci
|
691c45d57f
|
Smarter handling of hollow prints. Optimization included
|
2013-07-28 10:56:41 +02:00 |
|
Alessandro Ranellucci
|
25af3eb35f
|
Proper fix for preventing shells to propagate too much
|
2013-07-27 19:41:36 +02:00 |
|
Alessandro Ranellucci
|
6bd4803612
|
Failing test case about spurious infill in hollow objects, caused by shells being correctly generated even for hollow objects - however sometimes we don't want that
|
2013-07-26 20:17:33 +02:00 |
|
Alessandro Ranellucci
|
b1147861dd
|
Implement lower_bound() and upper_bound() methods for ZTable
|
2013-07-20 21:19:59 +02:00 |
|
Alessandro Ranellucci
|
1b285f3f46
|
Thread-safe integration of ExtrusionPath::Collection
|
2013-07-18 22:29:12 +02:00 |
|
Alessandro Ranellucci
|
c7b6818ccf
|
Ported offset() and offset2()
|
2013-07-17 00:48:29 +02:00 |
|
Alessandro Ranellucci
|
bf8c799685
|
Ported diff_ex, intersection_ex, union_ex, xor_ex
|
2013-07-17 00:29:09 +02:00 |
|
Alessandro Ranellucci
|
898007fc36
|
Port offset_ex() and offset2_ex() to XS
|
2013-07-16 20:09:53 +02:00 |
|
Alessandro Ranellucci
|
9b582a11ff
|
Adopt XS containers everywhere (incomplete work)
|
2013-07-16 09:49:34 +02:00 |
|
Alessandro Ranellucci
|
159a009f96
|
Fix tests here and there
|
2013-07-15 15:26:56 +02:00 |
|
Alessandro Ranellucci
|
f612d4c64e
|
Ported ExtrusionPath to XS. Failing test for Surface
|
2013-07-15 12:14:22 +02:00 |
|
Alessandro Ranellucci
|
7534c1e6d9
|
Use Slic3r::Surface::Collection for Layer::Region->slices
|
2013-07-14 15:03:45 +02:00 |
|
Alessandro Ranellucci
|
5885be881c
|
New Slic3r::Surface::Collection class
|
2013-07-14 14:56:43 +02:00 |
|
Alessandro Ranellucci
|
f7967414e0
|
Store layer slices and region slices as XS data to save memory and make them shared across threads
|
2013-07-07 12:54:20 +02:00 |
|
Alessandro Ranellucci
|
985af5ee56
|
Merge branch 'newslice'
|
2013-07-06 12:16:54 +02:00 |
|
Alessandro Ranellucci
|
86c4f5c5b0
|
Merge branch 'master' into newslice
|
2013-06-23 22:23:25 +02:00 |
|
Alessandro Ranellucci
|
de45b823e1
|
Merge branch 'master' into xs
|
2013-06-23 21:12:19 +02:00 |
|
Alessandro Ranellucci
|
2d687cd0a0
|
Only combine internal infill and leave internal-solid as it is. #1248
|
2013-06-23 18:21:47 +02:00 |
|
Alessandro Ranellucci
|
f3a9d41c70
|
Cache a Z table for layer range search
|
2013-06-23 17:07:12 +02:00 |
|