3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
691 Commits 1 Branch 1 Tag 249 MiB
217a6f2525
Commit Graph

691 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Alessandro Ranellucci
217a6f2525 Bugfix: any retraction_lift value different from "0" caused no retraction before layer changes. #453 2012-06-17 19:36:02 +02:00
Alessandro Ranellucci
7d6545dd07 Further simplification of point_in_polygon() 2012-06-17 19:09:11 +02:00
Alessandro Ranellucci
4f5870fdb6 Merge pull request #454 from beanz/trivial-speed-up-point-in-polygon 
Simplify creation of $n, @x and @y in point_in_polygon test.
 2012-06-17 10:06:11 -07:00
Alessandro Ranellucci
cde9f509d5 Merge pull request #456 from henrikbrixandersen/version 
Add --version argument
 2012-06-17 08:34:31 -07:00
Henrik Brix Andersen
c50cabe095 Add --version argument 2012-06-16 17:16:50 +02:00
Mark Hindess
2ef565fc4d Simplify creation of $n, @x and @y in point_in_polygon test. 
Gives 30% speed up on simcop2387's coaster on my laptop and it cuts the
maximum resident set size too.  I know this is going to be replaced but
thought this might be useful in the meantime.
 2012-06-16 08:28:37 +01:00
Alessandro Ranellucci
4d2a813450 Bump version number 2012-06-14 20:26:58 +02:00
Alessandro Ranellucci
a2c0e4a674 Releasing 0.8.3 2012-06-14 19:13:04 +02:00
Alessandro Ranellucci
ca8a91b2b0 Only apply arc compensation to circular holes. #418 2012-06-14 15:06:22 +02:00
Alessandro Ranellucci
b00d960f4d Merge pull request #450 from henrikbrixandersen/growl 
Move Growl::GNTP handling to Slic3r::GUI
 2012-06-14 05:35:25 -07:00
Henrik Brix Andersen
129f0fa904 Move Growl::GNTP handling to Slic3r::GUI to allow notifications from both Slic3r::GUI::SkeinPanel and Slic3r::GUI::Plater. 2012-06-14 13:49:50 +02:00
Alessandro Ranellucci
23edd7587f Merge pull request #449 from olasd/master 
Fix Slic3r::Polygon's boost_linestring method to properly close the polygon
 2012-06-14 04:48:03 -07:00
Nicolas Dandrimont
4296ea6da1 Slic3r::Polygon's boost_linestring method needs to close the contour. 
This prevented Slic3r from detecting some bridge supporting edges
(basically, if that edge was the last one in the contour).  This
addresses some of the bridge detection issues (#414, #358).
 2012-06-14 13:33:59 +02:00
Alessandro Ranellucci
74f92aa686 Merge pull request #443 from henrikbrixandersen/about 
Various fixes/additions to the About dialog handling
 2012-06-13 01:05:51 -07:00
Henrik Brix Andersen
3aa901f149 Show version and description in About dialog 2012-06-12 23:51:59 +02:00
Henrik Brix Andersen
65d6a83672 wxID_EXIT is already imported, no need to specify package name 2012-06-12 23:47:59 +02:00
Henrik Brix Andersen
230d4377c9 Fix display of special menu items (wxID_ABOUT, wxID_EXIT) on OS X 2012-06-12 23:46:50 +02:00
Alessandro Ranellucci
3c66ea3134 Merge pull request #439 from henrikbrixandersen/master 
Add temp Build.PL files to .gitignore
 2012-06-12 07:30:48 -07:00
Alessandro Ranellucci
b926e0b27d Support material lines need to be white 2012-06-11 20:42:39 +02:00
Alessandro Ranellucci
55ed4af06e DLP support material in SVG output (untested) 2012-06-11 14:47:48 +02:00
Henrik Brix Andersen
bff76db3fc Ignore generated artifacts 2012-06-11 14:12:23 +02:00
Alessandro Ranellucci
1f35a3f6aa Fixed regression preventing SVG export to work properly. #428 2012-06-11 13:50:38 +02:00
Alessandro Ranellucci
71c1c66985 Label and CLI option were wrong for top_solid_infill_speed. #425 2012-06-11 13:45:03 +02:00
Alessandro Ranellucci
c0c84d13b8 Always set bed temperature after first layer if first layer temperature is set. #427 2012-06-11 13:43:23 +02:00
Alessandro Ranellucci
3e94add8a8 Pass config options as environment variables to post-processing scripts 2012-06-09 17:52:03 +02:00
Alessandro Ranellucci
62bd33a766 Fixed regression causing fatal errors. #429 2012-06-09 15:53:14 +02:00
Alessandro Ranellucci
0c4b112718 Fixed regression preventing arcs to be generated at all (center detection is still buggy) 2012-06-07 19:53:27 +02:00
Alessandro Ranellucci
c0c53c4397 Fill gaps. #281 2012-06-07 15:31:51 +02:00
Alessandro Ranellucci
00c6b1bdf8 Bugfix: some thin walls still gave a fatal error. #416 2012-06-07 12:21:33 +02:00
Alessandro Ranellucci
0226039dfb Fixed regression when cooling is enabled 2012-06-07 11:38:54 +02:00
Alessandro Ranellucci
caa32ab282 Fixed regression causing flow errors when using legacy config files. #421 2012-06-07 11:24:45 +02:00
Alessandro Ranellucci
709c444976 Fixed fatal error when using --first-layer-extrusion-width 2012-06-07 11:17:35 +02:00
Alessandro Ranellucci
5c9916dc75 Some basic ability to close holes in non-manifold models 2012-06-06 22:28:23 +02:00
Alessandro Ranellucci
85ef7ce665 Bugfix: many thin walls were not detected correctly. #313 2012-06-06 21:27:39 +02:00
Alessandro Ranellucci
fbfbfac2b6 New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151 2012-06-06 19:59:20 +02:00
Alessandro Ranellucci
2ccb443c2f Bugfix: not retracting between infill of different islands using low infill densities. #242 2012-06-06 19:38:35 +02:00
Alessandro Ranellucci
58a696e666 Lift Z when changing layer too 2012-06-06 19:20:43 +02:00
Alessandro Ranellucci
8883df6692 Warn user when object couldn't be split 2012-06-06 19:00:34 +02:00
Alessandro Ranellucci
13e10abbbe Fixed regression causing some models not to be sliced correctly. #410 2012-06-06 18:57:46 +02:00
Alessandro Ranellucci
c7af74884f Legacy config files were not correctly supported 2012-06-06 18:47:11 +02:00
Alessandro Ranellucci
82dd3c7a3e New --perimeters-extrusion-width and --infill-extrusion-width options. #302 2012-06-06 18:05:03 +02:00
Alessandro Ranellucci
8a031fe501 New --first-layer-extrusion-width option. #385 2012-06-06 17:29:12 +02:00
Alessandro Ranellucci
d412820733 Update: preview area was not updating to the largest side of the build area 2012-06-06 16:18:41 +02:00
Alessandro Ranellucci
16b774603c Accept either absolute or relative values for --first-layer-height. #151 2012-06-06 16:11:38 +02:00
Alessandro Ranellucci
896c7e952e Renamed bottom_layer_speed to first_layer_speed for consistency 2012-06-06 15:52:21 +02:00
Alessandro Ranellucci
4a188f8566 Support for legacy config files containing bottom_layer_speed_ratio. #151 2012-06-06 15:48:14 +02:00
Alessandro Ranellucci
91ffb74429 Accept either absolute or relative values for --bottom-layer-speed. #151 2012-06-06 15:43:54 +02:00
Alessandro Ranellucci
aedb6cc35f Accept both relative and absolute extrusion width values. #151 2012-06-06 15:23:34 +02:00
Alessandro Ranellucci
2e3c8241e4 Merge pull request #407 from beanz/simplify-check-manifoldness 
Remove grep that is effectively repeated.
 2012-06-05 01:57:45 -07:00
Josh McCullough
9da034a042 fixes #409 2012-06-05 10:55:02 +02:00