3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4,759 Commits 1 Branch 1 Tag 249 MiB
3a6436f6f0
Commit Graph

4759 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
bubnikv
a0268a1906 Some other accelerator keys were not displayed on Linux and OSX correctly. 
Suppress them on these systems.
 2017-11-30 20:13:05 +01:00
bubnikv
752d72f58d Increased fill rate of the support 1st layer from 50% to 70%. 2017-11-30 19:04:07 +01:00
bubnikv
91e1dc639d Fix of the preceding cherry pick. 2017-11-30 19:00:26 +01:00
Joseph Lenox
488feb2335 Added --no-gui flag to force CLI usage (allows for CLI usage with AppImage build). 
Forced --gui flag in AppImage build.
 2017-11-30 18:42:31 +01:00
bubnikv
d161d4f78c There is a hack applied to add accelerator keys to the menu 
without being registered. Unfortunately this hack works on wxWidgets
on Windows. On OSX or Linux, a warning is emited and no accelerator
key is shown on the menu.
This commit just removes the warnings, it does not add the menu accelerators.
https://github.com/prusa3d/Slic3r/issues/539
 2017-11-30 18:26:15 +01:00
bubnikv
cecaf6eabc Slight optimization of the filament_start_gcode insertion: 
It is not needed between the purging towers and the wipe tower brim.
 2017-11-30 17:55:39 +01:00
bubnikv
a617e02ae6 New hot key for auto arrange: 'a'. 2017-11-30 17:45:03 +01:00
bubnikv
bff7065360 Fixed a bug in the support generator: There was half extrusion width 
gap created between the support and the support sheath.
Now the support sheath will overlap with the support base by 10%
of the extrusion width by default.
 2017-11-30 16:24:48 +01:00
bubnikv
3996535e5d Changed handling of filament_gcode_start and filament_gcode_end custom 
G-codes in case of single extruder multiple material setup:
At the start of the print, the filament_gcode_start is executed
for the active extruder only, and the filament_gcode_start /
filament_gcode_end are then executed at each tool change.

When the Prusa MM wipe tower is active, the tool changes are handled
a bit differently: M900 K0 is emited before the wipe tower extrusions start,
and the filament_gcode_start code is executed after the wipe tower extrusions
are done. This rule effectively disables the linear advance over the wipe tower.

Implements https://github.com/prusa3d/Slic3r/issues/568
 2017-11-30 16:01:47 +01:00
bubnikv
8807d288d7 Fixed a regression issue when starting Slic3r with non-existent datadir. 2017-11-30 15:51:51 +01:00
bubnikv
830da1f8e4 Fixed a regression bug of handling the obsolete config parameters, 
causing crashes.
 2017-11-30 13:43:02 +01:00
bubnikv
6aff27f3ab Moved initialization of Slic3r XS datadir variable to GUI.pm 
Solves https://github.com/prusa3d/Slic3r/issues/594
 2017-11-30 10:22:39 +01:00
bubnikv
2f54bf5bca Fixed a random crash in the PlaceholderParser due to deallocating 
an undefined pointer.
 2017-11-29 20:38:19 +01:00
bubnikv
f754cb422b Bumped up the version number. 2017-11-29 19:34:24 +01:00
bubnikv
ae118519ab Fixed a 32bit build bug in the new PlaceholderParser macro processor. 2017-11-29 19:27:26 +01:00
Eyal
da8ffd477d Missing prerequisites in Build.PL (#593) 
I was unable to compile without ExtUtils::XSpp and ExtUtils::Typemaps .

My platform is a fresh install of OctoPi on Raspberry Pi.

I'm not sure what the `0` in those lines does.
 2017-11-29 16:57:21 +01:00
bubnikv
6729dc1c6d Fixed a failing PlaceholderParser test case. 2017-11-29 16:35:48 +01:00
bubnikv
08e81f2765 Bumped up the build version. 2017-11-29 10:52:54 +01:00
bubnikv
0ddbfccb08 Added some test cases for the conditional G-code math calculator. 
https://github.com/prusa3d/Slic3r/issues/438
 2017-11-28 19:56:32 +01:00
bubnikv
9ca63f16bc New PlaceholderParser variable for sequential prints: 
current_object_idx - zero based index of the object printed.
Implements feature request https://github.com/prusa3d/Slic3r/issues/578
 2017-11-28 15:30:05 +01:00
bubnikv
672194b475 Ported the between_objects_gcode custom G-code blocks, 
thanks @lordofhyphens, https://github.com/alexrj/Slic3r/pull/3275

Improved handling of custom G-code blocks: Slic3r will try to extract
the target extruder and bed temperatures from the custom G-code blocks.
 2017-11-28 15:19:57 +01:00
bubnikv
f58b217369 Implemented loading of a Slic3r Config Bundle as a Slic3r Config file. 2017-11-28 11:57:33 +01:00
bubnikv
3c0cd3cbc8 Improve error handling of loading Slic3r profiles. 2017-11-28 10:08:01 +01:00
bubnikv
bb2b180ecc Fixed G-code export of custom G-code sections to not add a newline 
if the custom G-code already ends with a newline.
 2017-11-26 21:23:18 +01:00
bubnikv
b54a15faa2 Fix of the new PlaceholderParser: Maintain whitespaces and new lines. 2017-11-26 20:43:31 +01:00
bubnikv
571d654e67 Placeholder parser - added a comment with a reference to a C grammar. 2017-11-26 11:52:44 +01:00
bubnikv
5c3ba79c6f PlaceholderParser - added an unary not operator. 2017-11-26 11:16:28 +01:00
bubnikv
2312fa845e Fixed compilation on GCC, changed to handle keywords correctly. 2017-11-26 10:54:54 +01:00
bubnikv
708f416c84 PlaceholderParser extended with {if}/{elsif}{else} blocks and 
+ - * / == != <> numeric expressions.
 2017-11-26 09:59:14 +01:00
bubnikv
9205c8aab4 Sketch of the PlaceholderParser if/elsif/else macro. 2017-11-17 18:46:03 +01:00
bubnikv
47f193fe2d The PlaceholderParser has been rewritten to use 
a real boost::spirit::qi parser, accessing the DynamicConfig repository
directly. This is a first step towards a full fledged expression
interpreter.
 2017-11-17 11:15:46 +01:00
bubnikv
200f176951 Fixed compilation on Linux / GTK 2017-11-10 18:50:14 +01:00
bubnikv
4628308415 Oh those compiler differences. 2017-11-10 17:42:30 +01:00
bubnikv
bfce6dba9b Integrated the "compatible printers" idea by @alexrj with Vojtech's twist: 
The incompatible presets are hidden in the tabs if show_incompatible_presets
is false. If show_incompatible_presets is true, there is a button to
show / hide the incompatible presets from the tab selector.
 2017-11-10 17:27:05 +01:00
bubnikv
b23b9ea1d2 Implemented volumetric flow rate hints, 
removed some C++11 conditioned compilation. Slic3r now requires C++11.
 2017-11-09 15:10:20 +01:00
bubnikv
9a0100d6de Initial definition of PresetHints C++ class and Perl binding, ported the cooling logic hints to C++. 
Removed Perl Flow::new_from_spacing bindings.
Some Fill C++11 beautification.
Fix of a support_material_1st_layer_flow, brim_flow and skirt_flow logic to use the extrusion_width if both first_layer_extrusion_width and support_material_extrusion_width are undefined.
Documented the extrusion width logic in the config tooltips, including the default values.
 2017-11-09 10:48:06 +01:00
bubnikv
5fb54ed1f3 Code beautification: PrintConfig tooltips were split to multiple lines. 2017-11-09 10:06:25 +01:00
bubnikv
e4614f301c ConfigBase with option template to do the type conversion 
of resolved ConfigOption.
 2017-11-09 10:05:37 +01:00
bubnikv
71b58e24a9 Fixed a regression bug in the "first layer extrusion width" G-code comment. 
https://github.com/prusa3d/Slic3r/issues/566
 2017-11-06 15:43:56 +01:00
bubnikv
e6ecb77d9a Fixed loading of configs and configs from g-codes. 2017-11-03 19:14:33 +01:00
bubnikv
b11d9708ed Updated Controller after the presets C++ port. 2017-11-02 21:51:06 +01:00
bubnikv
dd9e1aff70 When loading Slic3r.ini of older Slic3rs, remove the .ini suffix 
from the preset names.
This fixes https://github.com/prusa3d/Slic3r/issues/367
 2017-11-02 17:31:24 +01:00
bubnikv
ee84e1773d Fixed an incorrect comment separator in generated g-code. 2017-11-02 16:50:08 +01:00
bubnikv
4ab4a9afe8 Fighting with boost::filesystem::directory_iterator 2017-11-02 16:40:25 +01:00
bubnikv
7551006102 Another fix or Unices of the previous commit. 2017-11-02 16:35:46 +01:00
bubnikv
df5628422c Fixed serial port enumeration on non-Win32 systems. 2017-11-02 16:29:03 +01:00
bubnikv
e8b6d92d4d Looks like the reworked C++ preferences start to work again. 2017-11-02 16:21:34 +01:00
bubnikv
95c284c764 Next step of Perl to C++ configuration layer conversion. 2017-11-01 19:30:05 +01:00
bubnikv
337f6c5808 Deleted the config-bundle-to-config.pl tool, it will be replaced 
with direct loading of a config bundle as a config file the same way
it has been done for the config from a G-code.
 2017-10-30 18:55:31 +01:00
bubnikv
d564fc95df Split Preset.cpp,hpp to Preset.cpp,hpp and PresetBundle.cpp,hpp 2017-10-30 18:41:50 +01:00