Alessandro Ranellucci
|
da36df65a4
|
Warning removed when exporting config
|
2013-06-02 11:15:57 +02:00 |
|
Alessandro Ranellucci
|
5f06cea821
|
Prevent --extrusion-multiplier <= 0. #1183
|
2013-05-31 12:45:18 +02:00 |
|
Alessandro Ranellucci
|
ccdb29ddc9
|
New --spiral-vase option to continously raise Z when printing single-walled vases. #997
|
2013-05-13 20:15:45 +02:00 |
|
Alessandro Ranellucci
|
bac5093de4
|
Alwyas apply disable_fan_first_layers, even if cooling is disabled, since fan_always_on is applied in that case as well. Update descriptive text and have it appear in case of disabled auto cooling. #1166
|
2013-05-10 15:09:27 +02:00 |
|
Alessandro Ranellucci
|
7de8b20bc4
|
New wipe feature
|
2013-03-17 02:22:50 +01:00 |
|
Alessandro Ranellucci
|
700fee14aa
|
Set honeycomb as default fill pattern, as it works better at low layer heights and makes stronger parts
|
2013-03-17 00:24:53 +01:00 |
|
Alessandro Ranellucci
|
c999d0c44f
|
Set default value for first_layer_height to 0.35mm so that first_layer_extrusion_width = 200% works fine even when user sets layer_height to 0.1. A first layer height of 0.35mm works fine for both 0.35 and 0.5 nozzles so it should be fine for most users
|
2013-03-17 00:22:53 +01:00 |
|
Alessandro Ranellucci
|
35bd5a3423
|
New --solid-infill-extrusion-width option
|
2013-03-17 00:02:31 +01:00 |
|
Alessandro Ranellucci
|
cf5adca928
|
New --resolution option to simplify input models
|
2013-03-16 19:58:34 +01:00 |
|
Alessandro Ranellucci
|
db2e76a0df
|
New option to change perimeter order. #534
|
2013-03-16 18:56:49 +01:00 |
|
Alessandro Ranellucci
|
0feef890b1
|
Use Class::XSAccessor
|
2013-03-13 01:29:45 +01:00 |
|
Alessandro Ranellucci
|
2942485a94
|
New option to make infill before perimeters. #1039
|
2013-03-10 18:15:44 +01:00 |
|
Alessandro Ranellucci
|
d2152a53a0
|
Missing tooltip for extra perimeters
|
2013-03-10 12:30:43 +01:00 |
|
Alessandro Ranellucci
|
e9c7460c11
|
New --bridge-acceleration option
|
2013-03-09 20:31:09 +01:00 |
|
Alessandro Ranellucci
|
b7b89ff7f2
|
Bugfix: *-acceleration options didn't work in CLI
|
2013-03-09 20:21:05 +01:00 |
|
Alessandro Ranellucci
|
460e169c67
|
New option to disable retraction on layer change
|
2013-03-09 20:05:43 +01:00 |
|
Alessandro Ranellucci
|
e71bf48463
|
Add a command to lift nozzle in default start G-code
|
2013-03-09 19:51:09 +01:00 |
|
Alessandro Ranellucci
|
97e864699e
|
New top-infill-extrusion-width option
|
2013-03-07 16:00:58 +01:00 |
|
Alessandro Ranellucci
|
72613ae2b4
|
Enable only_retract_when_crossing_perimeters by default
|
2013-03-05 15:01:45 +01:00 |
|
Alessandro Ranellucci
|
3b1e921171
|
Slight changes to the defaults
|
2013-02-23 19:14:41 +01:00 |
|
Alessandro Ranellucci
|
5eade0f9e1
|
Don't validate the number of layers for infill combination, just limit it automatically. #993
|
2013-02-22 16:24:24 +01:00 |
|
Alessandro Ranellucci
|
cac79c0575
|
New option to only infill where strictly needed for supporting ceilings
|
2013-02-09 23:36:32 +01:00 |
|
Alessandro Ranellucci
|
8efe46e58d
|
New option to enforce support material on a given number of layers to improve adhesion of objects with poor footprint
|
2013-02-04 15:48:57 +01:00 |
|
Alessandro Ranellucci
|
c8100ed099
|
Disable randomize starting points by default
|
2013-02-04 15:05:56 +01:00 |
|
Alessandro Ranellucci
|
9222526e03
|
Customizable number of interface layers for support material and raft
|
2013-02-03 17:23:50 +01:00 |
|
Alessandro Ranellucci
|
acada05068
|
Merge branch 'raft'
|
2013-02-02 16:17:05 +01:00 |
|
Alessandro Ranellucci
|
d3727a1699
|
Add ability to have cross-hatched rectilinear support material. #509
|
2013-02-02 00:14:45 +01:00 |
|
Alessandro Ranellucci
|
177f1a9bf0
|
New raft_layers option. #123
|
2013-01-28 14:12:01 +01:00 |
|
Alessandro Ranellucci
|
e8cb1f4528
|
Slight addition to avoid_crossing_perimeters tooltip
|
2013-01-28 10:42:24 +01:00 |
|
Alessandro Ranellucci
|
61b164b539
|
Merge branch 'master' into avoid-crossing-perimeters
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
|
2013-01-26 21:45:17 +01:00 |
|
Alessandro Ranellucci
|
94bb1e54bb
|
Raise max temperatures (in GUI) to 400°C
|
2013-01-23 11:10:46 +01:00 |
|
Alessandro Ranellucci
|
177347137f
|
New G-code flavor for Sailfish (thanks to fros1y for working on it). #826
|
2013-01-17 14:56:31 +01:00 |
|
Alessandro Ranellucci
|
4fc6fc5ab6
|
Increase default value for retract_length_toolchange
|
2013-01-17 11:51:00 +01:00 |
|
Alessandro Ranellucci
|
954520cba5
|
Enable cooling by default
|
2013-01-17 10:40:45 +01:00 |
|
Alessandro Ranellucci
|
4bff4d0d50
|
Ignore perimeter_acceleration and infill_acceleration if their values are 25 and 50 to handle legacy configs gracefully.
|
2013-01-15 12:52:22 +01:00 |
|
Alessandro Ranellucci
|
ad9be0e4d7
|
Bugfix: crash when reading/writing files to paths containing non-ASCII characters on Windows. #651 #865
|
2013-01-13 10:18:34 +01:00 |
|
Alessandro Ranellucci
|
48e00a4c40
|
Merge branch 'master' into avoid-crossing-perimeters
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Print.pm
lib/Slic3r/SVG.pm
|
2013-01-12 19:00:18 +01:00 |
|
Alessandro Ranellucci
|
32fd58d531
|
Acceleration control. #185
|
2013-01-10 15:29:40 +01:00 |
|
Alessandro Ranellucci
|
34e047205a
|
Automatic detection of support material threshold angle
|
2013-01-02 19:40:48 +01:00 |
|
Alessandro Ranellucci
|
e59ed7efb7
|
New toolchange_gcode option. #547
|
2012-12-23 16:29:08 +01:00 |
|
Alessandro Ranellucci
|
b70404bb23
|
Disable gap filling if gap fill speed is set to zero
|
2012-12-17 19:55:25 +01:00 |
|
Alessandro Ranellucci
|
142a6cc4eb
|
Add --vibration-limit back to CLI usage and disable it by default
|
2012-12-05 17:57:35 +01:00 |
|
Alessandro Ranellucci
|
cf32cd6510
|
Implement vibration limit using G4 pauses
|
2012-12-05 15:03:36 +01:00 |
|
Alessandro Ranellucci
|
0f0992e39a
|
Speed for support material. #813
|
2012-11-23 17:20:26 +01:00 |
|
Alessandro Ranellucci
|
5dba02fdeb
|
New separate speed setting for gap fill. #785
|
2012-11-23 11:25:02 +01:00 |
|
Alessandro Ranellucci
|
21a6219b62
|
Disable vibration limit. #785
|
2012-11-23 11:14:06 +01:00 |
|
Alessandro Ranellucci
|
124a1fd84e
|
Raise default frequency limit to 25Hz
|
2012-11-19 18:03:49 +01:00 |
|
Alessandro Ranellucci
|
99c942b5ea
|
Merge branch 'vibration-limit'
|
2012-11-19 15:54:50 +01:00 |
|
Alessandro Ranellucci
|
e119cee66c
|
Don't emit warnings on unknown options
|
2012-11-18 17:42:52 +01:00 |
|
Alessandro Ranellucci
|
600e951fd8
|
Completed vibration limit
|
2012-11-17 12:08:19 +01:00 |
|