bubnikv
2455aee97c
Further reduction of Perl Config.pm methods.
2017-10-27 18:52:35 +02:00
bubnikv
401059066e
Switched to Perl local::lib for local compilation.
...
Taken from upstream Slic3r, thanks @alexrj.
2017-08-18 09:58:50 +02:00
bubnikv
aaefb76888
Fixed test cases after change of the "sane" extrusion widths.
...
Changed the default perimeter / infill overlap to 25%.
2017-07-20 11:03:54 +02:00
bubnikv
f0325575c2
Slic3r has been modified to propagate the following filament specific
...
values to GCode generator, one per active extruder:
bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time
Now it remains to extend Slic3r to correctly apply these values.
2017-06-21 16:15:39 +02:00
bubnikv
ed2ee2f6f3
Merged support_fills with support_interface_fills.
...
When extruding supports, the support is interleaved with interface
if possible (when extruded with the same extruder).
Otherwise the base is extruded first.
2017-04-07 17:37:30 +02:00
bubnikv
79f5a16536
Reverted the perimeter generator to not save the perimeter areas.
...
These could be calculated from the fill areas if needed.
On the other side, the non-classified (non-split) fill areas are stored
now for use in the "ensure vertical wall thickness" feature,
also the non-split fill areas are re-used when recalculating the infills.
This is safer than trying to stitch the fill region together from the
classified fragments.
Modified the "ensure vertical wall thickness" feature to use the non-split
fill areas instead of perimeter areas for the calculation
of non-supported regions. This is cheaper as the fill areas contain
roughly half the edges.
2016-11-17 23:22:59 +01:00
bubnikv
b5e24d3527
Fix of a test case of PerimeterGenerator.
2016-09-28 11:17:59 +02:00
Alessandro Ranellucci
48f1fab49f
Bugfix: an error in porting caused bad perimeter ordering. Includes regression test and more unit tests for PerimeterGenerator
2015-12-01 20:40:00 +01:00
Alessandro Ranellucci
6ac79e3ed6
Ported make_perimeters() to C++
2015-07-23 16:27:21 +02:00
Alessandro Ranellucci
b4515cf695
Finished porting PerimeterGenerator to C++
2015-07-23 15:53:02 +02:00
Alessandro Ranellucci
b14290b9f6
Make tests happy
2015-07-02 14:29:20 +02:00
Alessandro Ranellucci
f14c0e2183
Bugfix: concave starting points were not correctly detected for slice holes. Includes regression test. #2857
2015-06-01 17:55:51 +02:00
Alessandro Ranellucci
095391d702
When using raft, validate first layer height against support material extruder only instead of taking other extruders into account, thus potentially allowing larger nozzles to be used for it. #2701
2015-03-06 21:35:00 +01:00
Alessandro Ranellucci
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
Alessandro Ranellucci
406d045ced
The inwards move after an external loop was still randomly generated outwards in some cases. Perimeters are now generated with a distinct iterator for each slice. Nested islands are also correctly supported too. Various regression tests included. #2253
2015-01-08 15:22:13 +01:00
Alessandro Ranellucci
6ce651eb4a
Fixed wrong implementation of concave_points() and convex_points() in C++. #2384
2014-12-07 19:53:22 +01:00
Alessandro Ranellucci
c4d70bcb85
Always use a rectangle with semicircles as extrudate shape
2014-07-26 15:29:24 +02:00
Alessandro Ranellucci
e24b3a8916
Merge branch 'call_get_layer' of github.com:sapir/Slic3r into sapir-call_get_layer
...
Conflicts:
lib/Slic3r/Print.pm
2014-06-14 00:05:24 +02:00
Alessandro Ranellucci
5dcc1eab79
Bugfix: seam_position = aligned failed in certaim circumstances because of faulty concave points detection. Includes regression test
2014-06-11 21:58:41 +02:00
Alessandro Ranellucci
88a2e5c791
Typo seal -> seam :-)
2014-05-24 22:10:28 +02:00
Alessandro Ranellucci
a3bd1b5302
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
2014-05-22 19:34:49 +02:00
Alessandro Ranellucci
69002b8ea2
No tests were covering randomize-start, which was not working anymore after recent ExtrusionLoop refactoring. #2028
2014-05-12 21:49:17 +02:00
Alessandro Ranellucci
7ba08c90cf
Refactoring to Model API for making it stricter and safer
2014-05-09 14:24:35 +02:00
Alessandro Ranellucci
a31b2e6ca2
Stricter implementation of the overhang detection. Includes unit tests
2014-04-29 19:58:58 +02:00
Alessandro Ranellucci
15628a90ed
Regression test for numerical issues causing thin gaps between perimeters and infill. #1803
2014-04-18 17:30:35 +02:00
Alessandro Ranellucci
e02d33bbce
Remove weak test. #1803
2014-04-15 00:57:43 +02:00
Alessandro Ranellucci
43ffb7d3e8
Bugfix: sometimes a tiny gap was left between infill and perimeters. Includes regression test. #1803
2014-04-15 00:22:31 +02:00
Alessandro Ranellucci
5ce4de0544
Bugfix: wrong inwards moves were calculated for 2+ copies because ExtrusionLoop objects were modified in place. Includes regression test. #1842
2014-03-24 20:01:14 +01:00
Alessandro Ranellucci
bc44611f24
Fix failing test after recent changes to thin wall thresholds
2014-03-02 22:26:52 +01:00
Alessandro Ranellucci
5f2b2c90b6
Fix error in contains_point() port
2013-11-21 18:42:16 +01:00
Alessandro Ranellucci
5f81292f3f
Ported encloses_point() to XS and renamed to contains_point()
2013-11-21 16:21:42 +01:00
Alessandro Ranellucci
ea0e136b45
Prevent superfluous extra perimeters added when a region has an acute angle
2013-09-17 20:18:54 +02:00
Alessandro Ranellucci
7bd2ce21ca
Fix wrong bridge flow used for overhangs and bridge perimeters. Includes regression test. #1407
2013-09-17 10:37:01 +02:00
Alessandro Ranellucci
0ffb0f6a58
Fix tests
2013-09-02 22:10:52 +02:00
Alessandro Ranellucci
73c05a6092
Moved vibration limit to its own G-code filter
2013-08-28 20:37:56 +02:00
Alessandro Ranellucci
fb763b0187
Removed dependency on Math::Clipper
2013-08-27 01:26:44 +02:00
Alessandro Ranellucci
9458c7db97
Fix integration of XS containers
2013-07-16 17:13:01 +02:00
Alessandro Ranellucci
f455ecb7da
Rename adjust_overhang_flow to overhangs
2013-07-06 11:35:40 +02:00
Alessandro Ranellucci
1222f1f3e4
Update t/perimeters.t
2013-07-06 02:44:50 +02:00
Alessandro Ranellucci
c03f9f0197
Fixed regression causing wrong direction for inwards move in holes. Includes regression test. #1265
2013-06-23 00:05:08 +02:00
Alessandro Ranellucci
64a21276e3
Add regression test for concave starting points. #135
2013-06-22 15:22:58 +02:00
Alessandro Ranellucci
19b40baf55
Add regression test to ensure fan is enabled when printing overhangs. #432
2013-06-21 15:38:58 +02:00
Alessandro Ranellucci
c707073a73
Some fixes about overhang detection. Includes regression tests
2013-06-21 14:52:35 +02:00
