3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
750 Commits 1 Branch 1 Tag 249 MiB
5eb1982081
Commit Graph

750 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Alessandro Ranellucci
5eb1982081 Bugfix: brim was extruded multiple times when sequential printing was enabled 2012-06-30 16:14:45 +02:00
Alessandro Ranellucci
a7668e0933 Revert "Reduce memory usage during gcode output by discarding processed layers." 
This reverts commit 4d1551c305.
 2012-06-30 16:12:06 +02:00
Alessandro Ranellucci
d5c9b74377 Allow scaling factor to be at least 2540 to allow the conversion of inch models 2012-06-29 20:46:51 +02:00
Mark Hindess
b4a21bea40 Fix for #499. 2012-06-29 17:02:37 +01:00
Mark Hindess
4d1551c305 Reduce memory usage during gcode output by discarding processed layers. 
As each layer is processed, it increases in size by a factor of two
or three so by the end the layer list gets quite big.  So this removes
the list entry after it's been processed.
 2012-06-29 12:33:30 +01:00
Mark Hindess
2e1649e6b5 Comment out code that builds @vertices_facets data structure. 
Saves memory and speeds up reading large models.
 2012-06-28 19:58:21 +01:00
Alessandro Ranellucci
fb96cdec76 Command line options to assign perimeters and infill to different extruders 2012-06-28 16:48:56 +02:00
Alessandro Ranellucci
80501d5b3c New option to customize support material extrusion width 2012-06-28 16:33:07 +02:00
Alessandro Ranellucci
f9f2361acb Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture 2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
dbcfebeb66 Rename support_material_tool to support_material_extruder 2012-06-28 15:14:27 +02:00
Alessandro Ranellucci
3e8bc73fcb Fix typo in previous commit 2012-06-28 14:49:20 +02:00
Alessandro Ranellucci
898266fd34 Initial refactoring for supporting multiple extruders. Little speed optimization included 2012-06-28 14:44:54 +02:00
Alessandro Ranellucci
92460ba902 Bugfix: the plater didn't remember last input file directory. #485 2012-06-27 20:27:46 +02:00
Alessandro Ranellucci
eea6d84314 Bugfix: infill extrusion width was ignored 2012-06-27 19:55:54 +02:00
Alessandro Ranellucci
47a07a86ee Bugfix: GUI was unable to update flow settings 2012-06-27 19:49:53 +02:00
Alessandro Ranellucci
96a3234eaa Different speed for external perimeters. #488 2012-06-27 19:42:16 +02:00
Mark Hindess
cc330932d6 Revert "Simple remote interface to slic3r using plack." 
This reverts commit a3af688173.
 2012-06-27 17:58:27 +01:00
Mark Hindess
a3af688173 Simple remote interface to slic3r using plack. 
Only supports a single stl model but supporting other file formats and
merge would be quite simple.  Speed might mean requests timeout if
slicing takes too long.  Just a proof-of-concept really but I might
use it to slice on my server from my laptop.
 2012-06-27 17:42:34 +01:00
Mark Hindess
a49827f5ab Revert "Fix license to match README." 
This reverts commit 7d858338fa.

At least xnaron's perl doesn't like 'agpl3'.
 2012-06-27 07:15:30 +01:00
Mark Hindess
840752194f Speed up encloses_point calls from medial_axis code. 
The points shouldn't be on hole borders so we can make the check
much quicker.  Gives over 50% speed up slicing reprap shot glass
(thing:11944) with default settings and 0.3 layer height.
 2012-06-26 23:11:46 +01:00
Mark Hindess
7d858338fa Fix license to match README. 2012-06-25 23:00:50 +01:00
Mark Hindess
1d3f7e0b1c Trivia: Remove duplicate word "speed". 2012-06-25 22:57:05 +01:00
Alessandro Ranellucci
3a8f4015d6 Don't reset E when the makerbot flavor is selected 2012-06-24 21:05:44 +02:00
Alessandro Ranellucci
0938c73d08 Revert "Don't reset E when the makerbot flavor is selected" 
This reverts commit 2e5e5983be.
 2012-06-24 21:05:21 +02:00
Alessandro Ranellucci
2e5e5983be Don't reset E when the makerbot flavor is selected 2012-06-24 20:58:12 +02:00
Alessandro Ranellucci
f057dd4818 Bump version number to the correct one 2012-06-24 17:21:27 +02:00
Alessandro Ranellucci
73655d7ccc Bump version number 2012-06-24 17:18:29 +02:00
Alessandro Ranellucci
0372d06247 Releasing 0.8.4 2012-06-24 16:50:09 +02:00
Alessandro Ranellucci
a4dcbd62da Remove recursion warning for Douglas-Peucker 2012-06-24 16:37:59 +02:00
Alessandro Ranellucci
f88f516c30 Optimize honeycomb travels 2012-06-24 16:09:24 +02:00
Alessandro Ranellucci
a6dca1d82a New option for support material pattern spacing; also, fixes and speedups to the overhang detection 2012-06-24 14:39:35 +02:00
Alessandro Ranellucci
36753d85b7 New option to define the overhang threshold angle for support material generation 2012-06-23 23:54:39 +02:00
Alessandro Ranellucci
07daefeddb Require Moo 0.091009 2012-06-23 23:28:21 +02:00
Alessandro Ranellucci
1fb44474a9 Connect support material paths 2012-06-23 22:58:12 +02:00
Alessandro Ranellucci
bf1aba3d08 New --support-material-pattern and --support-material-angle options 2012-06-23 22:43:23 +02:00
Alessandro Ranellucci
e72bd56b9d Rename brim_thickness to brim_width 2012-06-23 22:27:59 +02:00
Alessandro Ranellucci
a9d480f7bf Bugfix: first layer extrusion width was computed on general layer height rather than first layer height. #465 2012-06-23 21:45:18 +02:00
Alessandro Ranellucci
48addf8c3f New feature: brim. #424 2012-06-23 21:31:29 +02:00
Alessandro Ranellucci
53d24bc580 Bugfix: some infill paths were not connected. #477 2012-06-23 20:27:28 +02:00
Alessandro Ranellucci
ac08cf7469 Disable arc compensation code 2012-06-23 20:19:58 +02:00
Alessandro Ranellucci
44c636aea1 Do not oversimplify outer perimeters and keep the full resolution of the input file. #340 #462 2012-06-23 20:08:08 +02:00
Alessandro Ranellucci
20229fccdb Bugfix: fatal error when a layer contained nothing 2012-06-23 18:31:24 +02:00
Alessandro Ranellucci
464400a37b Bugfix: when skirt distance was set to zero, the first loop coincided with the outer perimeter of the object 2012-06-23 17:44:05 +02:00
Alessandro Ranellucci
05e4571310 Do perimeters from outside to inside. #466 2012-06-23 17:41:44 +02:00
Alessandro Ranellucci
410279823c New separate option to control the addition of automatic extra perimeters. Also, add none if perimeters are set to 0. #459 2012-06-23 17:10:30 +02:00
Mark Hindess
f61a1f5a07 Create *::Geometry::nearest_point_index to speed up shortest_path method. 
This fix gives a further 10% speedup on simcop2387's coaster.
 2012-06-22 23:12:39 +01:00
Mark Hindess
62eb41b967 Manage flattened endpoint list rather than creating it at every iteration. 
Gives an 8% speedup on simcop2387's coaster for me.
 2012-06-22 23:12:39 +01:00
Alessandro Ranellucci
a578af9d28 Fix support material 2012-06-21 11:51:24 +02:00
Alessandro Ranellucci
94e28b9ab8 Require Math::Clipper 1.09 because it contains important bugfixes 2012-06-21 10:53:04 +02:00
Alessandro Ranellucci
be8970b497 Fixed regression causing infill lines not being always connected near perimeters 2012-06-19 18:49:46 +02:00