Alessandro Ranellucci
|
debdd164e2
|
Bugfix: fatal error and warnings removed when cleaning some dirty layers
|
2012-01-21 18:44:24 +01:00 |
|
Alessandro Ranellucci
|
00c6287488
|
Bugfix: fill escapes perimeters. #139
|
2012-01-21 17:11:14 +01:00 |
|
Alessandro Ranellucci
|
a4194554c9
|
Write single wall width (extrusion width) to the G-code file
|
2012-01-21 17:02:55 +01:00 |
|
Alessandro Ranellucci
|
331ede52b8
|
Do all shells for a hole before moving onto the next one. #88
|
2012-01-21 16:35:33 +01:00 |
|
Alessandro Ranellucci
|
63972a3a35
|
Some more overlap
|
2012-01-21 16:35:23 +01:00 |
|
Alessandro Ranellucci
|
7636b67871
|
Fix comments in Perimeter.pm
|
2012-01-21 12:00:12 +01:00 |
|
Alessandro Ranellucci
|
f1b1454b36
|
Loops were not closing well
|
2012-01-21 11:51:31 +01:00 |
|
Alessandro Ranellucci
|
0e23f20df1
|
Poor overlap between perimeters and infill
|
2012-01-21 11:48:03 +01:00 |
|
Alessandro Ranellucci
|
a0ebee2ca3
|
Warn if no layers were detected
|
2012-01-21 11:34:03 +01:00 |
|
Alessandro Ranellucci
|
c5b6787a19
|
Print the number of bogus holes to debug output
|
2012-01-21 11:24:26 +01:00 |
|
Alessandro Ranellucci
|
92cdaf2f2d
|
Retract at end of print
|
2012-01-20 14:48:51 +01:00 |
|
Alessandro Ranellucci
|
ce4aca0b29
|
Revoking Artistic License
|
2012-01-18 20:04:18 +01:00 |
|
Alessandro Ranellucci
|
d1ad02cc71
|
Removed one more fatal error caused by recent refactoring
|
2012-01-18 19:28:49 +01:00 |
|
Alessandro Ranellucci
|
bba91fc0a5
|
Some better debug messages and a note about self-intersecting polygons. #160
|
2012-01-18 18:59:34 +01:00 |
|
Alessandro Ranellucci
|
478775ef1c
|
Add checkbox to GUI to enable G-code comments
|
2012-01-18 10:46:39 +01:00 |
|
Alessandro Ranellucci
|
f419cf37d1
|
Use solid print speed for internal solid layers too. #167
|
2012-01-18 10:07:42 +01:00 |
|
Alessandro Ranellucci
|
59cd027a68
|
Temporarily disable small gap filling as it requires a fix not to slow down everything
|
2012-01-13 18:24:08 +01:00 |
|
Alessandro Ranellucci
|
90d10b24a8
|
Fill gaps using medial axis detection
|
2012-01-12 22:05:35 +01:00 |
|
Alessandro Ranellucci
|
a3a9cf5749
|
Yet other things not changed when refactored. #163
|
2012-01-12 10:48:18 +01:00 |
|
Alessandro Ranellucci
|
b605381132
|
Bugfix: more errors in infills after refactoring. #162
|
2012-01-11 23:19:56 +01:00 |
|
Alessandro Ranellucci
|
8735ac3c57
|
Bridges now have higher priority than other solid surfaces. #140
|
2012-01-11 23:16:09 +01:00 |
|
Alessandro Ranellucci
|
5fefcc0dc4
|
More fixes after refactoring
|
2012-01-11 23:14:59 +01:00 |
|
Alessandro Ranellucci
|
468f09d3c1
|
Bugfix: small surfaces where still infilled even with fill_density = 0
|
2012-01-11 22:38:06 +01:00 |
|
Alessandro Ranellucci
|
ac8a33a40a
|
Merge pull request #143 from triffid/check-bin-dir-for-config
also check slic3r bin directory for config
|
2012-01-11 13:17:02 -08:00 |
|
Alessandro Ranellucci
|
0184b0f205
|
Fixed many little things that were not updated along with recent large refactoring. #157 #144
|
2012-01-11 20:13:26 +01:00 |
|
Michael Moon
|
7bf354151c
|
also check slic3r bin directory for config
|
2011-12-31 17:39:56 +11:00 |
|
Alessandro Ranellucci
|
8ed91a8ec4
|
Very large refactoring. Ditched Slic3r::Polyline::Closed and reorganized geometric classes.
|
2011-12-30 19:59:51 +01:00 |
|
Alessandro Ranellucci
|
2def6a9787
|
Bugfix: medial axis code threw fatal errors sometimes
|
2011-12-30 18:58:27 +01:00 |
|
Alessandro Ranellucci
|
4b2bd7f779
|
Bugfix: wrong month number in output
|
2011-12-30 18:57:58 +01:00 |
|
Alessandro Ranellucci
|
f08ebe97b2
|
Bugfix: fatal error for some models and thin walls not considered for skirt
|
2011-12-30 18:51:48 +01:00 |
|
Alessandro Ranellucci
|
1c7564e4a4
|
Thin walls. #24
|
2011-12-30 17:17:37 +01:00 |
|
Alessandro Ranellucci
|
62ee79f0c9
|
Remember last config file path when loaded from CLI too
|
2011-12-26 19:45:01 +01:00 |
|
Alessandro Ranellucci
|
d6dcb35237
|
Remember the filename and path of the last config file loaded, to use as default for saving
|
2011-12-26 19:06:57 +01:00 |
|
Alessandro Ranellucci
|
f9446b9c6e
|
Cleanup the --output-filename-format implementation. #53 #137
|
2011-12-26 17:25:13 +01:00 |
|
Clarence Risher
|
1071b556cb
|
second draft implementation of output_filename_format
|
2011-12-26 04:20:45 -05:00 |
|
Alessandro Ranellucci
|
342823fdf3
|
Bugfix: fatal error in arc detection code. #133
|
2011-12-25 13:01:48 +01:00 |
|
Alessandro Ranellucci
|
a86bc260e7
|
Bugfix: some islands having ho holes and contained in holes themselves were ignored
|
2011-12-24 11:01:28 +01:00 |
|
Alessandro Ranellucci
|
47df3f8f2d
|
Releasing 0.5.7
|
2011-12-22 18:56:11 +01:00 |
|
Alessandro Ranellucci
|
ab0300bb70
|
Bugfix for recent solid infill adjustment math, to take float math into account
|
2011-12-22 18:55:18 +01:00 |
|
Alessandro Ranellucci
|
75cbe879b7
|
New "Slice and save as..." command to specify output filename. #53
|
2011-12-22 17:38:37 +01:00 |
|
Alessandro Ranellucci
|
b1d6420ff4
|
Avoid test failures due to floating point values comparison
|
2011-12-22 12:19:24 +01:00 |
|
Alessandro Ranellucci
|
1cc28844a5
|
Merge pull request #131 from sparr/master
this fixes a bug with arc lengths as discussed on IRC, including two unit tests
|
2011-12-22 03:16:16 -08:00 |
|
Clarence Risher
|
a81e8c4afc
|
correct length calculation for clockwise arcs
|
2011-12-22 06:10:54 -05:00 |
|
Alessandro Ranellucci
|
55045e0437
|
Limit skirt height to the print height. #128
|
2011-12-22 11:57:26 +01:00 |
|
Alessandro Ranellucci
|
28b851508e
|
Extended arcs unit test to check whether it works with both cw and ccw arcs
|
2011-12-22 11:38:04 +01:00 |
|
Alessandro Ranellucci
|
98a8c64ed7
|
Extended (and fixed) unit testing to track down (and fix) an issue caused by floating point math that reversed some holes into contours when they should actually be ignored
|
2011-12-22 11:24:46 +01:00 |
|
Alessandro Ranellucci
|
fbea5dae8f
|
Bugfix: consider holes when searching for supporting surfaces
|
2011-12-20 22:37:59 +01:00 |
|
Alessandro Ranellucci
|
fcb7f63c87
|
Added --ignore-nonexistent-config to allow integration with Pronterface even if config file doesn't exist
|
2011-12-20 17:44:19 +01:00 |
|
Alessandro Ranellucci
|
caf41f07dd
|
Output required filament length and volume to command line and to the gcode file itself
|
2011-12-20 15:29:15 +01:00 |
|
Alessandro Ranellucci
|
627e1b32e2
|
Add Slic3r version to gcode comment
|
2011-12-20 14:20:39 +01:00 |
|