3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
759 Commits 1 Branch 1 Tag 249 MiB
60ca76ff05
Commit Graph

759 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Mark Hindess
60ca76ff05 Oops. Somehow I missed this when doing interactive add. 2012-07-01 22:35:52 +00:00
Mark Hindess
ca78bbd88a Use Slic3r::Geometry polyline_lines rather than duplicate implementation. 
If it is good enough for polygons, it should be good enough for polylines.
 2012-07-01 23:15:17 +01:00
Mark Hindess
b11778a85f polygon_lines returns array of Slic3r::Line objects so bless is redundant. 2012-07-01 23:14:04 +01:00
Mark Hindess
a6d8d6473c split_at_first_point needn't call deserialize as split_at calls it. 2012-07-01 22:52:13 +01:00
Alessandro Ranellucci
641c2a241b Write Slic3r version in config files 2012-07-01 18:53:01 +02:00
Alessandro Ranellucci
c4b9a6cf61 Bugfix: flow wasn't adjusted for perimeters when a custom perimeters extrusion width was applied 2012-07-01 18:13:48 +02:00
Mark Hindess
07f2dab5f6 Fix perimeters_* options to be singular to be consistent. 2012-06-30 23:18:15 +01:00
Alessandro Ranellucci
cbb111ee64 Fix for incomplete commit causing thin gaps to throw an error 2012-06-30 17:23:55 +02:00
Alessandro Ranellucci
b9008a99f9 Fill the gaps while doing normal infill to avoid extra travel 2012-06-30 16:33:01 +02:00
Alessandro Ranellucci
5eb1982081 Bugfix: brim was extruded multiple times when sequential printing was enabled 2012-06-30 16:14:45 +02:00
Alessandro Ranellucci
a7668e0933 Revert "Reduce memory usage during gcode output by discarding processed layers." 
This reverts commit 4d1551c305.
 2012-06-30 16:12:06 +02:00
Alessandro Ranellucci
d5c9b74377 Allow scaling factor to be at least 2540 to allow the conversion of inch models 2012-06-29 20:46:51 +02:00
Mark Hindess
b4a21bea40 Fix for #499. 2012-06-29 17:02:37 +01:00
Mark Hindess
4d1551c305 Reduce memory usage during gcode output by discarding processed layers. 
As each layer is processed, it increases in size by a factor of two
or three so by the end the layer list gets quite big.  So this removes
the list entry after it's been processed.
 2012-06-29 12:33:30 +01:00
Mark Hindess
2e1649e6b5 Comment out code that builds @vertices_facets data structure. 
Saves memory and speeds up reading large models.
 2012-06-28 19:58:21 +01:00
Alessandro Ranellucci
fb96cdec76 Command line options to assign perimeters and infill to different extruders 2012-06-28 16:48:56 +02:00
Alessandro Ranellucci
80501d5b3c New option to customize support material extrusion width 2012-06-28 16:33:07 +02:00
Alessandro Ranellucci
f9f2361acb Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture 2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
dbcfebeb66 Rename support_material_tool to support_material_extruder 2012-06-28 15:14:27 +02:00
Alessandro Ranellucci
3e8bc73fcb Fix typo in previous commit 2012-06-28 14:49:20 +02:00
Alessandro Ranellucci
898266fd34 Initial refactoring for supporting multiple extruders. Little speed optimization included 2012-06-28 14:44:54 +02:00
Alessandro Ranellucci
92460ba902 Bugfix: the plater didn't remember last input file directory. #485 2012-06-27 20:27:46 +02:00
Alessandro Ranellucci
eea6d84314 Bugfix: infill extrusion width was ignored 2012-06-27 19:55:54 +02:00
Alessandro Ranellucci
47a07a86ee Bugfix: GUI was unable to update flow settings 2012-06-27 19:49:53 +02:00
Alessandro Ranellucci
96a3234eaa Different speed for external perimeters. #488 2012-06-27 19:42:16 +02:00
Mark Hindess
cc330932d6 Revert "Simple remote interface to slic3r using plack." 
This reverts commit a3af688173.
 2012-06-27 17:58:27 +01:00
Mark Hindess
a3af688173 Simple remote interface to slic3r using plack. 
Only supports a single stl model but supporting other file formats and
merge would be quite simple.  Speed might mean requests timeout if
slicing takes too long.  Just a proof-of-concept really but I might
use it to slice on my server from my laptop.
 2012-06-27 17:42:34 +01:00
Mark Hindess
a49827f5ab Revert "Fix license to match README." 
This reverts commit 7d858338fa.

At least xnaron's perl doesn't like 'agpl3'.
 2012-06-27 07:15:30 +01:00
Mark Hindess
840752194f Speed up encloses_point calls from medial_axis code. 
The points shouldn't be on hole borders so we can make the check
much quicker.  Gives over 50% speed up slicing reprap shot glass
(thing:11944) with default settings and 0.3 layer height.
 2012-06-26 23:11:46 +01:00
Mark Hindess
7d858338fa Fix license to match README. 2012-06-25 23:00:50 +01:00
Mark Hindess
1d3f7e0b1c Trivia: Remove duplicate word "speed". 2012-06-25 22:57:05 +01:00
Alessandro Ranellucci
3a8f4015d6 Don't reset E when the makerbot flavor is selected 2012-06-24 21:05:44 +02:00
Alessandro Ranellucci
0938c73d08 Revert "Don't reset E when the makerbot flavor is selected" 
This reverts commit 2e5e5983be.
 2012-06-24 21:05:21 +02:00
Alessandro Ranellucci
2e5e5983be Don't reset E when the makerbot flavor is selected 2012-06-24 20:58:12 +02:00
Alessandro Ranellucci
f057dd4818 Bump version number to the correct one 2012-06-24 17:21:27 +02:00
Alessandro Ranellucci
73655d7ccc Bump version number 2012-06-24 17:18:29 +02:00
Alessandro Ranellucci
0372d06247 Releasing 0.8.4 2012-06-24 16:50:09 +02:00
Alessandro Ranellucci
a4dcbd62da Remove recursion warning for Douglas-Peucker 2012-06-24 16:37:59 +02:00
Alessandro Ranellucci
f88f516c30 Optimize honeycomb travels 2012-06-24 16:09:24 +02:00
Alessandro Ranellucci
a6dca1d82a New option for support material pattern spacing; also, fixes and speedups to the overhang detection 2012-06-24 14:39:35 +02:00
Alessandro Ranellucci
36753d85b7 New option to define the overhang threshold angle for support material generation 2012-06-23 23:54:39 +02:00
Alessandro Ranellucci
07daefeddb Require Moo 0.091009 2012-06-23 23:28:21 +02:00
Alessandro Ranellucci
1fb44474a9 Connect support material paths 2012-06-23 22:58:12 +02:00
Alessandro Ranellucci
bf1aba3d08 New --support-material-pattern and --support-material-angle options 2012-06-23 22:43:23 +02:00
Alessandro Ranellucci
e72bd56b9d Rename brim_thickness to brim_width 2012-06-23 22:27:59 +02:00
Alessandro Ranellucci
a9d480f7bf Bugfix: first layer extrusion width was computed on general layer height rather than first layer height. #465 2012-06-23 21:45:18 +02:00
Alessandro Ranellucci
48addf8c3f New feature: brim. #424 2012-06-23 21:31:29 +02:00
Alessandro Ranellucci
53d24bc580 Bugfix: some infill paths were not connected. #477 2012-06-23 20:27:28 +02:00
Alessandro Ranellucci
ac08cf7469 Disable arc compensation code 2012-06-23 20:19:58 +02:00
Alessandro Ranellucci
44c636aea1 Do not oversimplify outer perimeters and keep the full resolution of the input file. #340 #462 2012-06-23 20:08:08 +02:00