Fixes [Request] Add optional perimeter to raft #756
Fixes First support layer does not stick to bed #2101
New parameters raft_first_layer_density and raft_first_layer_expansion
to influence the 1st layer of raft or support.
Fixes Allow to disable raft under support structures. #3772
Fixes raft is larger than necessary #2568
Fixes Supports on the build plate should have a solid bottom interface for better adhesion #1165
Changed the 1st layer infill to rectilinear even for soluble materials.
Fixes first layer of support for multi filament support oddly spaced #1445
Fixes Full Soluble Materials interfacing into Models + Soluble material noise on Bed #684
Fixes Brim destroyed by support aka. Enable supports on top of brim #1156
Fixes Brim Priority/Support on Brim #713
Fixes Phantom Support columns interfere with brim #3396
Fixes false generation of brim when supports are used #3395
This is a work in progress, as the brim generator currently produces
different brim areas from what the support generator expects.
Relies to:
Concentric Fill Start Point - New Feature Request #4948
Feature Request: Archimedean Chords - Option to define direction of travel (Inside-Out or Outside-In) #5214
Fan speed will be ramped up linearly from zero at layer disable_fan_first_layers
to maximum at layer full_fan_speed_layer. full_fan_speed_layer will be
ignored if lower than disable_fan_first_layers, in which case
the fan will be running at maximum allowed speed at layer
disable_fan_first_layers + 1.;
WIP: The cooling PresetHints are likely not finalized yet.
2) Activating the physical_printer_settings_id when loading from 3MF, AMF, GCode.
The physical printer is only activated if it references the printer_settings_id
loaded from the same file.
3) When loading the presets from 3MF, AMF, GCode, the "external" profiles
are no more created for profiles which differ from the local profiles
the loaded profiles reference. Instead, the referenced profile is activated
and modified with the loaded preset. If the referenced profile does not
exist, but the profile refers to a system profile with the "inherits"
fileds, the system profile is loaded and modified instead.
This works for all profiles with the exception of multi-extruder
printer with multiple filament profiles modified. In that case
the first modified filament profile will be loaded as modified,
while the other modified profiles will be loaded as "external".
This should fix
Physical printer + 3mf file, wrong preset used to generate gcode #5178
and possibly
https://github.com/prusa3d/PrusaSlicer/issues/5272
Fixed some issues in internal anchors of the Adaptive Cubic infill.
The ugly and dangerous implicit casting operators in Line, MultiPoint,
Polyline and Polygon were made explicit.
The following threads are named with this commit:
slic3r_main, slic3r_BackgroundSlicingProcess,
slic3r_tbbpool_xx_yy where xx is a one based index of the TTB thread
and yy is the platform thread ID.
to help with detecting "not changed" event when taking
Undo/Redo snapshot or synchronizing with the back-end.
Converted layer height profile and supports / seam painted areas
to the same timestamp controlled structure.
1) All slicer's exceptions are now derived from Slic3r::Exception.
2) New exceptions are defined for slicing errors.
3) Exceptions are propagated to the Plater to show.
It remains to modify the slicing back-end to throw the new SlicingError
exceptions instead of std::runtime_error and to show the other exceptions
by a message dialog instead of a notification.
This reverts commit 3d3e36ba8d.
The change is too risky just before the PrusaSlicer 2.2.0 final release
and the feature may need a bit of polishing before release.
is enabled / disabled.
Spiral Vase forces different kind of slicing than the normal model:
In Spiral Vase mode, holes are closed and only the largest area contour is kept at each layer.
Therefore toggling the Spiral Vase on / off requires complete reslicing.
This commit moves the update to the correct location.
collisions against already printed objects: Rotation of an object
was not being taken into account.
Fixes#2450 PrusaSlicer 2.0 Sequential printing vs rotate object
Fixes#3585 Always Sequential Printing Error (Regardless of setting, placement or object size)
Fixed some collisions in sequential print just after arrangement by
making the validation using a slightly lower extruder radius value
than the arrangement.
Refactored PrintObject coordinate system so that the PrintObject's
coordinate system is always centered in respect to its ModelObject's
geometries. This refactoring may improve path planning a bit and
it may lower the requirements on bits representing Clipper coordinates
by 1 bit.
printer configuration:
ss -> sm : Just apply the color changes of the original ss project at the active extruder.
ss -> mm : There are no tool changes stored. Ignore color changes, they are invalid because they are extruder non-specific.
sm -> ss : Apply tool changes as color changes (tool changes remember the target color), apply original color changes.
sm -> mm : Ignore both color changes and tool changes.
mm -> ss/sm : Ignore both color changes and tool changes.
by the PlaceholderParser.
Namely, all the options with the "ratio_over" reference are now handled
correctly by the PlaceholderParser with the exception
of the "first_layer_extrusion_width", which overrides speed of extrusions
by their respective extrusion type.
Also the various extrusion widths (extrusion_width, first_layer_extrusion_width,
external_perimeter_extrusion_width etc.) produce the same numbers
as if ran through the back-end, with the assumption of not overriding
layer height by the variable layer height editing tool or layer height
modifiers.
where the PrintObject bounding box was not invalidated correctly
when the transformation matrices of instances changed.
Also refactored PrintObject::size() for const correctness.
so that the ordering code at G-code export may work directly with
pointers to PrintInstances instead of with pair of <PrintObject, copy idx>.
Also the PrintInstance knows its source ModelInstance, which allows
sorting of PrintInstances for sequential printing in the order
they appear in Plater's object list.
psWipeTower now equals to new psToolOrdering indicating that
the ToolOrdering has been calculated (only if non-sequential mode is active).
psBrim now equals to new psExtrusionPaths
psExtrusionPaths shall be the last step before psWipeTower, indicating
that all the printing extrusions are calculated for the G-code preview
slider to edit the custom per print_z color changes, tool changes etc.
Refactoring of GCode export of color changes, extruder switches etc,
so that the "color change" like extruder switches are applied first
at the Wipe Tower / G-code export, so that adding / removing
an extruder switch at the G-code preview slider does not invalidate
slicing.
If the Elephant foot compensation is applied to the 1st object's layer,
the uncompensated 1st object's slice is newly used for calculation
of bridges, overhans, skirt, brim, raft and supports.
Layer::slices were renamed to Layer::lslices to simplify reading
of the code, to differentiate from LayerRegion::slices.
Fixed layouts after the second opening of the dialog.
(Removing any extruder from the sequence does not cause an incorrect layout)
Validation of entered values added
(0 is not a valid value)
Layer newly remembers bounding boxes of slices,
the bounding boxes are used by G-code generator & newly the support
generator.
Slices are stored as ExPolygons, not ExPolygonCollection.
