YuSanka
53e100b890
Changed PrusaResearch.ini.
...
*(Uncommented "printer_model","printer_vendor", "printer_variant", "default_filament_profile")
* Added msg "It's system preset" to Dependencies
2018-03-23 09:41:52 +01:00
bubnikv
75230a790c
Prusa specific Config Bundle: Commented out the config values,
...
which this Slic3r version does not understand yet.
Fixes https://github.com/prusa3d/Slic3r/issues/795
2018-03-15 11:06:33 +01:00
bubnikv
7c027ee2ff
Removed the old Prusa specific config bundles.
2018-03-14 16:44:29 +01:00
bubnikv
b62f721ea6
Replaced the Prusa specific config bundles with a single PrusaResearch.ini,
...
so the Wizard will now offer just a single file. This file was copied
from the profile_inheritance branch to test the new profile hierarchy
before the branch gets merged into the master.
2018-03-14 16:30:51 +01:00
bubnikv
83a2d2af4b
Separated the soluble settings from the printer profiles.
2018-03-08 12:27:20 +01:00
bubnikv
4e58c9dab9
Split the 0.25mm and 0.6mm nozzle parameters from the printer profiles.
2018-03-07 18:30:58 +01:00
bubnikv
f0fde26295
Implemented inheritance of profiles inside a config bundle.
...
Updated the Prusa's presets to match the initial flat config bundle.
2018-03-07 16:48:28 +01:00
bubnikv
77e142553a
First take on the config inheritance / config hierarchy.
2018-03-06 21:50:12 +01:00
bubnikv
4f427f8387
Updated the bundled Slic3r profiles to match the current stable release
...
profiles, adjusted the speed / acceleration / jerk limits to match
the current MK3 firmware.
2018-02-02 10:51:08 +01:00
bubnikv
fec1fcdca8
Separated the Marlin G-code flavor from the RepRap G-code flavor
...
due to the differences in the M203 code
(RepRap firmware has it in mm/min, Marlin in mm/sec).
This difference is important to the G-code time estimator.
Changed the g-code flavor to Marlin for all Prusa3D bundled profiles.
2018-01-06 18:49:28 +01:00
bubnikv
60a6e7ba8e
Included the velocity, acceleration and jerk settings into the Prusa3D
...
printer profiles.
2018-01-06 15:23:02 +01:00
bubnikv
7012c04005
Updated the printer profiles.
2018-01-06 15:06:21 +01:00
bubnikv
40a6125d73
Updated printer profiles.
2018-01-06 15:06:11 +01:00
bubnikv
d7998870c7
Bumped up the minimum firmware version of the MK3 printers to 3.1.1-RC4
2017-12-29 21:39:55 +01:00
bubnikv
a056eadc1e
Changed perimeter-infill overlap of the bundled Prusa i3 MK3 printer
...
profiles from 35% to 25%.
2017-12-29 21:15:20 +01:00
bubnikv
d9985c0575
Updated the initial presets for the MK3.
2017-12-21 20:15:51 +01:00
bubnikv
472946be32
Removed Original Prusa i3 MK3, MK2S, MK2 and MK2S-MMU.ini
2017-12-21 20:13:16 +01:00
bubnikv
e71b021b6e
Updated the bundled presets for the Prusa3D printers.
2017-12-21 19:26:29 +01:00
bubnikv
5a768ddd7b
Updated the bundled config profile with the new compatible_printers_condition.
2017-12-19 17:10:28 +01:00
bubnikv
98fdb46da9
Added a first config bundle for the Prusa MK2 & MK3 machines.
2017-12-10 13:21:06 +01:00
