Alessandro Ranellucci
bb3feedc31
Bugfix: too many skirt layers were printed when using tall skirts and support material. #2695
2015-02-27 19:59:43 +01:00
Alessandro Ranellucci
70ace8c76f
Bugfix: use proper spacing for first support layer instead of trying to align it to upper layers. #2662
2015-02-27 18:43:15 +01:00
Alessandro Ranellucci
45c91b2ae9
Don't trigger extra perimeters when less than 30% of the upper loops would benefit from it. #2664 . Also fixes #2610
2015-02-24 00:34:43 +01:00
Alessandro Ranellucci
7a695a4a2f
Change the behaviour of infill/perimeter overlap to handle some edge cases. #2632
2015-02-23 23:44:34 +01:00
Alessandro Ranellucci
e88cf466fe
A couple notes about infill_only_where_needed
2015-02-23 00:55:00 +01:00
Alessandro Ranellucci
2655f3f816
Better and more robust implementation of infill_only_where_needed
2015-02-23 00:44:51 +01:00
Alessandro Ranellucci
69ea88473d
Workaround for the Clipper issue causing extra points in grid segments
2015-02-22 17:09:08 +01:00
Alessandro Ranellucci
f8fa73fa4a
Removed debugging stuff
2015-02-22 17:04:08 +01:00
Alessandro Ranellucci
2eca094170
Added failing test case for Clipper regression causing extra points in polyline intersection, thus crash with circular bed shape
2015-02-22 17:03:23 +01:00
Alessandro Ranellucci
edbc11477c
Update to Clipper 6.2.9. Fixes #2639
2015-02-22 15:13:52 +01:00
Alessandro Ranellucci
5021c9605b
Revert "Merge pull request #2681 from robstarling/u/robstar/circular-bedshape-drawing-fix2"
...
This reverts commit 13885a36ec7198607420
2015-02-22 15:01:33 +01:00
Alessandro Ranellucci
13885a36ec
Merge pull request #2681 from robstarling/u/robstar/circular-bedshape-drawing-fix2
...
Bugfix: correctly draw circular beds in the 2D plater
2015-02-22 14:52:53 +01:00
Alessandro Ranellucci
7198607420
Merge pull request #2667 from hyperair/issue-2662
...
Fix support material first layer extrusion width
2015-02-22 14:48:57 +01:00
Alessandro Ranellucci
6413d5dcba
Merge pull request #2630 from lordofhyphens/fix-admesh-warning
...
Fix a warning about unused return value when using freopen in admesh.
2015-02-22 14:48:17 +01:00
Rob Starling
6719afadec
Bugfix: correctly draw circular beds in the 2D plater
...
Wx::DrawLine wasn't happy with a polyline, so we pass the sequence of points to Wx::DrawLines
2015-02-21 14:08:52 -08:00
Chow Loong Jin
073681a50a
Get first_layer_extrusion_width from PrintConfig instead of PrintObjectConfig
...
This fixes an issue where the support material doesn't honour a custom first
layer extrusion width.
Fixes : #2662
2015-02-17 13:59:46 +08:00
Alessandro Ranellucci
d44bf38906
Sync viewport of 3D views. #2628
2015-02-16 00:37:36 +01:00
Alessandro Ranellucci
09c8563e71
Bugfix: background processing were not restarted after the previous one failed because of a validation error. #2633
2015-02-16 00:05:39 +01:00
Alessandro Ranellucci
a07c48bb30
Fixed regression causing [input_filename] and [input_filename_base] not being available in custom G-code anymore. Includes regression test. #1507
2015-02-15 23:47:35 +01:00
Alessandro Ranellucci
c0f453f83e
Simpler and more robust implementation of extra perimeters. #2395
2015-02-15 21:58:14 +01:00
Alessandro Ranellucci
5574e376d6
More aggressive gap fill #2560
2015-02-15 18:25:24 +01:00
Alessandro Ranellucci
ba6ae12635
Change end_program() to postamble()
2015-02-15 17:09:17 +01:00
Alessandro Ranellucci
1180a6d83f
Merge pull request #2508 from strahlex/machinekit-gcode
...
added support Machinekit flavour GCode
2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
8851dc7f23
Added failing test case for upstream Clipper issue 126 (our #2639 )
2015-02-15 16:47:55 +01:00
Alessandro Ranellucci
32b8eb489c
Updated Clipper to 6.2.8. This fixes several minor issues, including infill paths not being trimmed correctly. #2448
2015-02-15 16:10:04 +01:00
Alessandro Ranellucci
43f4806142
Load files into the GUI when supplying them as command line arguments along with the --gui switch. #2644
2015-02-14 12:54:06 +01:00
Alessandro Ranellucci
6eb1fa36ed
Bugfix: bridge speed was still used for first object layer above raft when support_material_contact_distance == 0. Includes regression tests. #2656
2015-02-14 12:47:33 +01:00
Alessandro Ranellucci
dd17682fac
Merge pull request #2658 from kentfredric/typemaps
...
Remove redundant dep on ExtUtils::Typemap
2015-02-13 19:16:49 +01:00
Kent Fredric
df5c2a6f11
Remove redundant dep on ExtUtils::Typemap
...
Typemap (Singluar) version 1.00 is essentially identical to Typemaps (Plural)
Typemap is literally a dumb subclass of TypeMaps, and so this
dependency simply gives an extra installation requirement that does
nothing.
2015-02-14 06:44:22 +13:00
Alexander Rössler
cef1494852
Switched to P parameter instead of S for Machinekit flavour MCode commands
2015-02-10 14:22:23 +01:00
Alessandro Ranellucci
13d1393ae4
Fixed buttons size on Linux. #2642
2015-02-09 11:04:28 +01:00
Alessandro Ranellucci
64144d007c
Typo in 4083b33807
2015-02-09 11:02:11 +01:00
Alessandro Ranellucci
4083b33807
Bugfix: crash on version check on Linux. #2641
2015-02-09 11:00:44 +01:00
Alessandro Ranellucci
a68fed3938
Bump version number
2015-02-09 10:53:55 +01:00
Alexander Rössler
cc83e9f06d
using end_program() function in GCode output
2015-02-07 12:37:00 +01:00
Alexander Rössler
f2fa8cb63f
added end_program() function to GCodeWriter
2015-02-07 12:36:29 +01:00
Alexander Rössler
d6feec808c
enabling firmware retraction for Machinekit in GUI
2015-02-07 12:35:35 +01:00
Alexander Rössler
32eff40422
added retract and unretract command for Machinekit flavour
2015-02-06 19:16:57 +01:00
Alexander Rössler
d35226b889
added support Machinekit flavour GCode
2015-02-06 18:48:46 +01:00
Joseph Lenox
102785d154
Fix a warning about unused return value when using freopen in admesh. Added another NULL check for safety.
2015-02-05 00:58:27 -06:00
Alessandro Ranellucci
0d822f0ec2
Removing Perl 5.12 from Travis CI, adding 5.20
2015-02-01 22:01:24 +01:00
Alessandro Ranellucci
73eb11b395
Releasing 1.2.6
2015-02-01 15:47:29 +01:00
Alessandro Ranellucci
bb3bf28e59
Ported prepare_fill_surfaces() to XS/C++
2015-02-01 12:43:58 +01:00
Alessandro Ranellucci
97b5d76d50
Enforce cleaner honeycomb paths
2015-02-01 12:27:20 +01:00
Alessandro Ranellucci
8b6b192dac
Throw an error for first_layer_height == 0. #2605
2015-02-01 12:18:18 +01:00
Alessandro Ranellucci
07cd25d0ec
New option for customization of infill/perimeters overlap. #2459
2015-02-01 12:08:25 +01:00
Alessandro Ranellucci
fbcf5319ea
Fixed regression in seam_position = aligned. #2604
2015-01-31 21:45:27 +01:00
Alessandro Ranellucci
98417f77f0
Some improvements to the Simple Mode
2015-01-31 12:46:24 +01:00
Alessandro Ranellucci
2e88b088e6
Make tests happy with new defaults
2015-01-31 12:10:50 +01:00
Alessandro Ranellucci
84eb37e218
Typo in previous commit
2015-01-31 11:57:18 +01:00
