3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
751 Commits 1 Branch 1 Tag 249 MiB
b9008a99f9
Commit Graph

751 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Alessandro Ranellucci
b9008a99f9 Fill the gaps while doing normal infill to avoid extra travel 2012-06-30 16:33:01 +02:00
Alessandro Ranellucci
5eb1982081 Bugfix: brim was extruded multiple times when sequential printing was enabled 2012-06-30 16:14:45 +02:00
Alessandro Ranellucci
a7668e0933 Revert "Reduce memory usage during gcode output by discarding processed layers." 
This reverts commit 4d1551c305.
 2012-06-30 16:12:06 +02:00
Alessandro Ranellucci
d5c9b74377 Allow scaling factor to be at least 2540 to allow the conversion of inch models 2012-06-29 20:46:51 +02:00
Mark Hindess
b4a21bea40 Fix for #499. 2012-06-29 17:02:37 +01:00
Mark Hindess
4d1551c305 Reduce memory usage during gcode output by discarding processed layers. 
As each layer is processed, it increases in size by a factor of two
or three so by the end the layer list gets quite big.  So this removes
the list entry after it's been processed.
 2012-06-29 12:33:30 +01:00
Mark Hindess
2e1649e6b5 Comment out code that builds @vertices_facets data structure. 
Saves memory and speeds up reading large models.
 2012-06-28 19:58:21 +01:00
Alessandro Ranellucci
fb96cdec76 Command line options to assign perimeters and infill to different extruders 2012-06-28 16:48:56 +02:00
Alessandro Ranellucci
80501d5b3c New option to customize support material extrusion width 2012-06-28 16:33:07 +02:00
Alessandro Ranellucci
f9f2361acb Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture 2012-06-28 16:22:11 +02:00
Alessandro Ranellucci
dbcfebeb66 Rename support_material_tool to support_material_extruder 2012-06-28 15:14:27 +02:00
Alessandro Ranellucci
3e8bc73fcb Fix typo in previous commit 2012-06-28 14:49:20 +02:00
Alessandro Ranellucci
898266fd34 Initial refactoring for supporting multiple extruders. Little speed optimization included 2012-06-28 14:44:54 +02:00
Alessandro Ranellucci
92460ba902 Bugfix: the plater didn't remember last input file directory. #485 2012-06-27 20:27:46 +02:00
Alessandro Ranellucci
eea6d84314 Bugfix: infill extrusion width was ignored 2012-06-27 19:55:54 +02:00
Alessandro Ranellucci
47a07a86ee Bugfix: GUI was unable to update flow settings 2012-06-27 19:49:53 +02:00
Alessandro Ranellucci
96a3234eaa Different speed for external perimeters. #488 2012-06-27 19:42:16 +02:00
Mark Hindess
cc330932d6 Revert "Simple remote interface to slic3r using plack." 
This reverts commit a3af688173.
 2012-06-27 17:58:27 +01:00
Mark Hindess
a3af688173 Simple remote interface to slic3r using plack. 
Only supports a single stl model but supporting other file formats and
merge would be quite simple.  Speed might mean requests timeout if
slicing takes too long.  Just a proof-of-concept really but I might
use it to slice on my server from my laptop.
 2012-06-27 17:42:34 +01:00
Mark Hindess
a49827f5ab Revert "Fix license to match README." 
This reverts commit 7d858338fa.

At least xnaron's perl doesn't like 'agpl3'.
 2012-06-27 07:15:30 +01:00
Mark Hindess
840752194f Speed up encloses_point calls from medial_axis code. 
The points shouldn't be on hole borders so we can make the check
much quicker.  Gives over 50% speed up slicing reprap shot glass
(thing:11944) with default settings and 0.3 layer height.
 2012-06-26 23:11:46 +01:00
Mark Hindess
7d858338fa Fix license to match README. 2012-06-25 23:00:50 +01:00
Mark Hindess
1d3f7e0b1c Trivia: Remove duplicate word "speed". 2012-06-25 22:57:05 +01:00
Alessandro Ranellucci
3a8f4015d6 Don't reset E when the makerbot flavor is selected 2012-06-24 21:05:44 +02:00
Alessandro Ranellucci
0938c73d08 Revert "Don't reset E when the makerbot flavor is selected" 
This reverts commit 2e5e5983be.
 2012-06-24 21:05:21 +02:00
Alessandro Ranellucci
2e5e5983be Don't reset E when the makerbot flavor is selected 2012-06-24 20:58:12 +02:00
Alessandro Ranellucci
f057dd4818 Bump version number to the correct one 2012-06-24 17:21:27 +02:00
Alessandro Ranellucci
73655d7ccc Bump version number 2012-06-24 17:18:29 +02:00
Alessandro Ranellucci
0372d06247 Releasing 0.8.4 2012-06-24 16:50:09 +02:00
Alessandro Ranellucci
a4dcbd62da Remove recursion warning for Douglas-Peucker 2012-06-24 16:37:59 +02:00
Alessandro Ranellucci
f88f516c30 Optimize honeycomb travels 2012-06-24 16:09:24 +02:00
Alessandro Ranellucci
a6dca1d82a New option for support material pattern spacing; also, fixes and speedups to the overhang detection 2012-06-24 14:39:35 +02:00
Alessandro Ranellucci
36753d85b7 New option to define the overhang threshold angle for support material generation 2012-06-23 23:54:39 +02:00
Alessandro Ranellucci
07daefeddb Require Moo 0.091009 2012-06-23 23:28:21 +02:00
Alessandro Ranellucci
1fb44474a9 Connect support material paths 2012-06-23 22:58:12 +02:00
Alessandro Ranellucci
bf1aba3d08 New --support-material-pattern and --support-material-angle options 2012-06-23 22:43:23 +02:00
Alessandro Ranellucci
e72bd56b9d Rename brim_thickness to brim_width 2012-06-23 22:27:59 +02:00
Alessandro Ranellucci
a9d480f7bf Bugfix: first layer extrusion width was computed on general layer height rather than first layer height. #465 2012-06-23 21:45:18 +02:00
Alessandro Ranellucci
48addf8c3f New feature: brim. #424 2012-06-23 21:31:29 +02:00
Alessandro Ranellucci
53d24bc580 Bugfix: some infill paths were not connected. #477 2012-06-23 20:27:28 +02:00
Alessandro Ranellucci
ac08cf7469 Disable arc compensation code 2012-06-23 20:19:58 +02:00
Alessandro Ranellucci
44c636aea1 Do not oversimplify outer perimeters and keep the full resolution of the input file. #340 #462 2012-06-23 20:08:08 +02:00
Alessandro Ranellucci
20229fccdb Bugfix: fatal error when a layer contained nothing 2012-06-23 18:31:24 +02:00
Alessandro Ranellucci
464400a37b Bugfix: when skirt distance was set to zero, the first loop coincided with the outer perimeter of the object 2012-06-23 17:44:05 +02:00
Alessandro Ranellucci
05e4571310 Do perimeters from outside to inside. #466 2012-06-23 17:41:44 +02:00
Alessandro Ranellucci
410279823c New separate option to control the addition of automatic extra perimeters. Also, add none if perimeters are set to 0. #459 2012-06-23 17:10:30 +02:00
Mark Hindess
f61a1f5a07 Create *::Geometry::nearest_point_index to speed up shortest_path method. 
This fix gives a further 10% speedup on simcop2387's coaster.
 2012-06-22 23:12:39 +01:00
Mark Hindess
62eb41b967 Manage flattened endpoint list rather than creating it at every iteration. 
Gives an 8% speedup on simcop2387's coaster for me.
 2012-06-22 23:12:39 +01:00
Alessandro Ranellucci
a578af9d28 Fix support material 2012-06-21 11:51:24 +02:00
Alessandro Ranellucci
94e28b9ab8 Require Math::Clipper 1.09 because it contains important bugfixes 2012-06-21 10:53:04 +02:00