3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,653 Commits 1 Branch 1 Tag 249 MiB
c62b49d1af
Commit Graph

1496 Commits

Author SHA1 Message Date
Alessandro Ranellucci
4bff4d0d50 Ignore perimeter_acceleration and infill_acceleration if their values are 25 and 50 to handle legacy configs gracefully. 2013-01-15 12:52:22 +01:00
Mike Sheldrake
bce3e96210 extraneous fill against sloped walls with fill every N layers #834 
Polygons used for N x depth fill surfaces need to be offset
by flow spacing before they are reused to clip lower fill surfaces.
Otherwise thin fill sections remain on clipped layers against sloping
walls, and the N x depth fill collides with them.
 2013-01-14 21:18:31 -08:00
Mike Sheldrake
68fc91d854 offset miter limit to 3 - 801 828 836 851 875 - spikes and pimples 
Was set to 10 to address 801. Setting to 3 has the same effect for 801,
and avoids spike artifacts that are likely causing "spike and pimple"
problems in the referenced issues.
 2013-01-13 02:50:49 -08:00
Alessandro Ranellucci
ad9be0e4d7 Bugfix: crash when reading/writing files to paths containing non-ASCII characters on Windows. #651 #865 2013-01-13 10:18:34 +01:00
Alessandro Ranellucci
48e00a4c40 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	lib/Slic3r/GCode.pm
	lib/Slic3r/GUI/Plater.pm
	lib/Slic3r/Print.pm
	lib/Slic3r/SVG.pm
 2013-01-12 19:00:18 +01:00
Mike Sheldrake
73aae07e74 842, 847 slightly enlarge a clip polygon to counteract integer truncation 
Geomery in referenced issues triggered Clipper problems, but also
pointed to a situation where integer truncation (as coordinates pass
into Clipper) might be shrinking a clip polygon in a way that leaves
degenerate or unwanted thin clip results. Growing the clip polygon by 2
is expected to overcome any issues caused by truncation of floats.
 2013-01-11 10:15:42 -08:00
Alessandro Ranellucci
3d03faf0b2 Remove leftover M501 2013-01-10 17:19:38 +01:00
Alessandro Ranellucci
32fd58d531 Acceleration control. #185 2013-01-10 15:29:40 +01:00
Alessandro Ranellucci
7239ca18c1 Simple mode 2013-01-03 15:49:20 +01:00
Alessandro Ranellucci
cf4c090208 Added Preferences dialog 2013-01-02 20:30:48 +01:00
Alessandro Ranellucci
34e047205a Automatic detection of support material threshold angle 2013-01-02 19:40:48 +01:00
Alessandro Ranellucci
cbd298bc36 Alter extrusion width automatic calculation to take "native flow" into account 2013-01-02 19:22:51 +01:00
Alessandro Ranellucci
30d9b2e508 Refactoring: initialize all layers at once and avoid duplication of slicing height math. #637 2013-01-01 23:28:48 +01:00
Alessandro Ranellucci
1774143011 Bugfix: PlanePath fill patterns were not working anymore. #880 2012-12-31 14:11:36 +01:00
Alessandro Ranellucci
141a8d3989 Bugfix: some holes being closed incorrectly. #858 2012-12-30 17:57:30 +01:00
Alessandro Ranellucci
6e6bc74636 Added failing test case for troubleshooting unexpected filled holes. #858 2012-12-30 16:27:20 +01:00
Alessandro Ranellucci
0da71dbdfa Fix regression causing wrong number of solid shells when using fill_density = 0 (includes regression test) 2012-12-23 20:20:17 +01:00
Alessandro Ranellucci
e59ed7efb7 New toolchange_gcode option. #547 2012-12-23 16:29:08 +01:00
Alessandro Ranellucci
15f07197d8 Don't store ->surfaces anymore. Save memory, save time 2012-12-22 23:57:39 +01:00
Alessandro Ranellucci
5930267de9 Bugfix: some top/bottom solid shells are not treated as solid. #689 2012-12-21 20:25:48 +01:00
Alessandro Ranellucci
8cd8e8b209 Merge branch 'test-dual-retraction' 2012-12-21 15:23:07 +01:00
Alessandro Ranellucci
dc4ada2374 Fix retraction tests and fix retract_extra_length and lift in multiple extruders environments 2012-12-21 15:14:44 +01:00
Alessandro Ranellucci
701c98c5a7 Export Slic3r::Test::_eq() 2012-12-21 13:25:03 +01:00
Alessandro Ranellucci
d5537e7797 Enable retraction for support material too, but only when moving away from support islands. #831 2012-12-20 18:47:40 +01:00
Alessandro Ranellucci
bf603b0221 Fixed regression causing inefficient paths during infill 2012-12-20 18:10:20 +01:00
Alessandro Ranellucci
dcc0ce78db Fix warning 2012-12-20 17:03:50 +01:00
Alessandro Ranellucci
ea304a4803 Bugfix: custom layer G-code was applied before Z change, and not after like it was documented. #869 2012-12-20 17:01:01 +01:00
Alessandro Ranellucci
b70404bb23 Disable gap filling if gap fill speed is set to zero 2012-12-17 19:55:25 +01:00
Alessandro Ranellucci
1a3497b71d Add tests for vibration limiting and fix implementation. Also includes a fix in set_shift() 2012-12-09 18:33:25 +01:00
Alessandro Ranellucci
4078bb0476 Fix error when vibration limit is disabled 2012-12-06 10:54:28 +01:00
Alessandro Ranellucci
142a6cc4eb Add --vibration-limit back to CLI usage and disable it by default 2012-12-05 17:57:35 +01:00
Alessandro Ranellucci
ca0aa5c287 Apply vibration limit to every move except perimeters 2012-12-05 16:32:50 +01:00
Alessandro Ranellucci
25960a33e0 Put vibration limit back in GUI 2012-12-05 15:08:17 +01:00
Alessandro Ranellucci
cf32cd6510 Implement vibration limit using G4 pauses 2012-12-05 15:03:36 +01:00
Alessandro Ranellucci
f001374c6e New implementation of the little inwards move before leaving a loop. #186 2012-12-05 11:31:35 +01:00
Alessandro Ranellucci
283809f5c2 No need for a role to identify small perimeters 2012-12-05 10:47:41 +01:00
Alessandro Ranellucci
ac6dc67e6a Tidy 2012-12-05 01:12:50 +01:00
Alessandro Ranellucci
accc598eb5 Revert "Experimental feature: make a little move inwards by 45° after finishing the external perimeter and before retracting. #186" 
This reverts commit c57e94c065.

Conflicts:

	lib/Slic3r/GCode.pm
 2012-11-29 19:16:07 +01:00
Alessandro Ranellucci
b495e15d7f Fix plater slowness after the introduction of the vertical projection 2012-11-29 19:13:52 +01:00
Alessandro Ranellucci
93310a6a81 Fix bounding_box_center() 2012-11-24 00:15:02 +01:00
Alessandro Ranellucci
116ab446e3 Show vertical projection instead of convex hull for objects with <= 2000 facets. #780 2012-11-24 00:13:04 +01:00
Alessandro Ranellucci
e6afebb982 Bump version number 2012-11-23 19:37:41 +01:00
Alessandro Ranellucci
452b62e53d Releasing 0.9.7 2012-11-23 18:38:50 +01:00
Alessandro Ranellucci
12873e973b One more missing bit for gap_fill_speed 2012-11-23 18:37:47 +01:00
Alessandro Ranellucci
556e59bbe4 Last commit erroneously reverted gap fill speed 2012-11-23 17:41:15 +01:00
Alessandro Ranellucci
0f0992e39a Speed for support material. #813 2012-11-23 17:20:26 +01:00
Alessandro Ranellucci
d6d96391a9 Avoid overextrusion when support material spacing is configured to < the extrusion spacing. #821 2012-11-23 17:15:52 +01:00
Alessandro Ranellucci
e7b307df02 Expose gap_fill_speed in GUI 2012-11-23 17:09:59 +01:00
Alessandro Ranellucci
5dba02fdeb New separate speed setting for gap fill. #785 2012-11-23 11:25:02 +01:00
Alessandro Ranellucci
68e302fe27 Fix exporting G-code 2012-11-23 11:24:04 +01:00
Alessandro Ranellucci
21a6219b62 Disable vibration limit. #785 2012-11-23 11:14:06 +01:00
Alessandro Ranellucci
2abf2be781 New testing framework 2012-11-21 20:41:14 +01:00
Alessandro Ranellucci
8ae96a8868 Only apply vibration limit to gaps fill while it's not very mature to work with long segments 2012-11-21 19:27:38 +01:00
Alessandro Ranellucci
fc399d60e2 Raise the miter limit to avoid squaring corners too easily. #801 2012-11-20 17:43:20 +01:00
Alessandro Ranellucci
cd892fdce8 Connect zigzag gaps fill paths to benefit from simplification 2012-11-19 18:57:42 +01:00
Alessandro Ranellucci
e91320e031 Fix rotation for threaded perls 2012-11-19 18:31:41 +01:00
Alessandro Ranellucci
124a1fd84e Raise default frequency limit to 25Hz 2012-11-19 18:03:49 +01:00
Alessandro Ranellucci
de8a845d81 Disable retraction for support material 2012-11-19 18:03:20 +01:00
Alessandro Ranellucci
5678cd562c Fix preview after rotation in plater 2012-11-19 17:39:16 +01:00
Alessandro Ranellucci
99c942b5ea Merge branch 'vibration-limit' 2012-11-19 15:54:50 +01:00
Alessandro Ranellucci
3c7321ab80 Bugfix: some retractions between objects/copies were skipped. #786 2012-11-19 15:34:52 +01:00
Alessandro Ranellucci
300734db38 Emit M106 S0 instead of M107 for Teacup 2012-11-19 15:30:55 +01:00
Alessandro Ranellucci
183736dd9a Infill flow for bottom layer was calculated incorrectly when first_layer_height != layer_height 2012-11-19 12:37:05 +01:00
Alessandro Ranellucci
de0640603a Append full config when --gcode-comments is enabled 2012-11-18 19:53:52 +01:00
Alessandro Ranellucci
a66e8e547d Apply Douglas-Peucker to all paths before generating G-code 2012-11-18 18:00:33 +01:00
Alessandro Ranellucci
e119cee66c Don't emit warnings on unknown options 2012-11-18 17:42:52 +01:00
Alessandro Ranellucci
c99ff0cfe2 Apply Douglas-Peucker to all paths before generating G-code 2012-11-18 17:38:08 +01:00
Alessandro Ranellucci
08700aa942 Keep bridge flow unchanged even with the new overlapping spacing 2012-11-18 15:44:47 +01:00
Alessandro Ranellucci
427e3c1720 Keep bridge flow unchanged even with the new overlapping spacing 2012-11-18 15:42:59 +01:00
Alessandro Ranellucci
7a87a76391 Refactor frequency limit to avoid processing G-code 2012-11-18 15:28:13 +01:00
Alessandro Ranellucci
008633f013 Working implementation of frequency limit 2012-11-18 12:23:11 +01:00
Alessandro Ranellucci
f3164594eb More incomplete work 2012-11-18 11:33:53 +01:00
Alessandro Ranellucci
72007c4f6a Rewrite frequency limiting code 2012-11-17 18:07:13 +01:00
Alessandro Ranellucci
600e951fd8 Completed vibration limit 2012-11-17 12:08:19 +01:00
Alessandro Ranellucci
96dd106f61 Initial work for limiting vibrations 2012-11-17 10:40:15 +01:00
Alessandro Ranellucci
8d557bee8c Bugfix: AMF export was not working anymore. #799 2012-11-16 22:41:54 +01:00
Alessandro Ranellucci
7310cec087 Remove one more unused line 2012-11-16 22:09:32 +01:00
Alessandro Ranellucci
ed50aefa71 Remove unused code 2012-11-16 22:08:14 +01:00
Alessandro Ranellucci
ac5be309e3 Do not call merge_continuous_lines() anymore 2012-11-16 19:20:46 +01:00
Alessandro Ranellucci
aff0898f35 Typo 2012-11-16 18:24:09 +01:00
Alessandro Ranellucci
e13fe1d636 Raise overlap factor to 1 >:-) 2012-11-16 18:11:06 +01:00
Alessandro Ranellucci
86f5cb8654 Previous commit about bridge spacing was incomplete 2012-11-16 18:10:09 +01:00
Alessandro Ranellucci
a81377d684 Apply overlap factor to bridges too 2012-11-16 13:18:06 +01:00
Alessandro Ranellucci
1c2bc94d5a Bugfix: only_retract_when_crossing_perimeters might cause some missed retractions when printing multiple copies of the same object. #786 2012-11-16 12:39:55 +01:00
Alessandro Ranellucci
a1a12ffe8e Allow setting top-solid-layers and bottom-solid-layers to 0 independently 2012-11-16 12:37:47 +01:00
Alessandro Ranellucci
06b475a4ed Clone last_pos before storing it otherwise it will be translated. #786 2012-11-16 11:05:45 +01:00
Alessandro Ranellucci
b625c3b2b2 Simplify gaps fills to avoid some shaking 2012-11-16 10:47:42 +01:00
Alessandro Ranellucci
a5a0f32e19 Expose all SLIC3R_* environment variables as placeholders. #781 2012-11-16 10:07:30 +01:00
Alessandro Ranellucci
580e36eb25 Raise offset scale factor back to 100000 now that Clipper was updated 2012-11-15 10:09:29 +01:00
Alessandro Ranellucci
d3629a3a44 Require Math::Clipper 1.15. #779 2012-11-13 11:53:02 +01:00
Alessandro Ranellucci
8f0e388c5b Bump version number 2012-11-07 23:22:12 +01:00
Alessandro Ranellucci
af78469231 Releasing 0.9.5 2012-11-07 23:07:43 +01:00
Alessandro Ranellucci
93bb2c1056 Bugfix: fatal error when using brim and no skirt. #784 2012-11-07 23:06:32 +01:00
Alessandro Ranellucci
2e3110d2e4 Possible (or at least partial) workaround for the current Clipper segfault. #779 2012-11-07 15:23:01 +01:00
Alessandro Ranellucci
2ef90562ce Fixed regression causing first two layers to be infilled with parallel lines 2012-11-06 22:16:01 +01:00
Alessandro Ranellucci
e21c806ee9 New wkt() method for debugging 2012-11-06 20:31:50 +01:00
Alessandro Ranellucci
1db614a5a9 Revert "Use G92 to apply Z offset. #486" #778 2012-11-06 20:04:44 +01:00
Alessandro Ranellucci
ab2b31672f Fixed regression causing a long string between copies 2012-11-06 19:54:21 +01:00
Alessandro Ranellucci
68c2ac601b Bump version number 2012-11-05 23:38:55 +01:00
Alessandro Ranellucci
ed100c477c Releasing 0.9.4 2012-11-05 17:52:08 +01:00
Alessandro Ranellucci
0bff8ad576 Bugfix: some multimaterial files generated a fatal error 2012-11-05 15:59:31 +01:00
Alessandro Ranellucci
0a912c6316 Only apply min_skirt_length on bottom layer 2012-11-05 14:26:55 +01:00
Alessandro Ranellucci
68e1edab80 Require Math::Clipper 1.14 and increase scale factor for offset(). #720 2012-11-05 00:17:46 +01:00
Mark Hindess
705d6b3179 Quick fix for support material. 2012-11-02 22:39:08 +00:00
Alessandro Ranellucci
d67c07bd47 Fix typo causing incomplete honeycomb infill after recent refactoring 2012-11-01 18:32:35 +01:00
Alessandro Ranellucci
93a8391e18 Alternate gaps fill direction 2012-11-01 11:53:18 +01:00
Alessandro Ranellucci
37c0b45187 Detect gaps even after the desired number of perimeters has been generated 2012-11-01 11:51:52 +01:00
Alessandro Ranellucci
cb4ede7f9e Do not pass the Print object to SVG::output anymore 2012-11-01 11:34:53 +01:00
Alessandro Ranellucci
554d10c854 Only put ExtrusionPath objects in ExtrusionPath::Collection (no ExtrusionLoop objects) 2012-10-31 19:08:29 +01:00
Alessandro Ranellucci
d4ccd39ad3 Minor code cleanup 2012-10-30 15:53:01 +01:00
Alessandro Ranellucci
92ab53868e Remove unused methods 2012-10-30 15:49:11 +01:00
Alessandro Ranellucci
44d91774a6 Get rid of useless Slic3r::Fill instances 2012-10-30 15:38:17 +01:00
Alessandro Ranellucci
cec7bf815c Get rid of the ExtrusionLoop objects in concentric filler 2012-10-30 15:29:13 +01:00
Alessandro Ranellucci
20e73face2 Get rid of max_print_dimension in filler objects 2012-10-30 15:09:54 +01:00
Alessandro Ranellucci
6c97e588b1 Don't require the print object in filler objects 2012-10-30 14:34:41 +01:00
Alessandro Ranellucci
5943114574 Only take layer_id instead of layer in filler objects 2012-10-30 14:25:48 +01:00
Alessandro Ranellucci
61047f0df5 Define perimeter/infill overlap over spacing instead of width and increase it slightly to compensate 2012-10-30 14:21:59 +01:00
Alessandro Ranellucci
610862a97f Use the actual flow spacing for clipping concentric loops 2012-10-30 14:17:30 +01:00
Alessandro Ranellucci
0a5016a509 Cleaner usage of the PI constant 2012-10-30 14:15:48 +01:00
Alessandro Ranellucci
25d88bddff Remove the change_layer method 2012-10-30 14:11:32 +01:00
Alessandro Ranellucci
52ed2c6ea4 Make flow_spacing required for ExtrusionLoop objects too 2012-10-30 14:07:50 +01:00
Alessandro Ranellucci
be7e211bb6 Make flow_spacing required for ExtrusionPath objects 2012-10-30 14:07:01 +01:00
Alessandro Ranellucci
37637c34f5 Refactor shortest_path 2012-10-30 13:59:33 +01:00
Alessandro Ranellucci
4c6fe0b3d4 Fixed regression preventing lift to work correctly 2012-10-30 10:45:55 +01:00
Alessandro Ranellucci
887634e1e2 Use G92 to apply Z offset. #486 2012-10-29 19:54:04 +01:00
Alessandro Ranellucci
709cbc1c15 Fixed regression causing support material generation to fail under threaded perls 2012-10-29 19:38:40 +01:00
Alessandro Ranellucci
df4dcf0534 Move by 30° instead of 45° when completing an external loop. #186 2012-10-29 11:21:41 +01:00
Alessandro Ranellucci
9b94a661d9 Fixed regression causing too much clipping at the endpoints of loops 2012-10-29 11:20:27 +01:00
Alessandro Ranellucci
e9ae62a9d1 New --min-skirt-length option. #269 2012-10-29 11:17:57 +01:00
Alessandro Ranellucci
c25e54a830 Expose perimeter/infill/support material extrusion widths in G-code comments 2012-10-29 00:31:25 +01:00
Alessandro Ranellucci
f2389682b6 Factor out some hard-coded settings 2012-10-29 00:23:33 +01:00
Alessandro Ranellucci
1ecadc10fb Fixed regression causing one perimeter to be generated even when perimeters where set to 0. #759 2012-10-28 19:27:54 +01:00
Alessandro Ranellucci
8da4151c6d Fix regression causing skirt to be printed at Z = 0 after a recent commit 2012-10-28 19:24:24 +01:00
Alessandro Ranellucci
c57e94c065 Experimental feature: make a little move inwards by 45° after finishing the external perimeter and before retracting. #186 2012-10-28 19:15:34 +01:00
Alessandro Ranellucci
ecd054a57c Don't emit T0 at the beginning of the file, so that it's generated automatically just right before starting the print 2012-10-28 17:29:01 +01:00
Alessandro Ranellucci
935173047a Allow [print_center_X] and [print_center_Y] syntax for all coordinates settings (including bed_center etc.) and [temperature_0], [temperature_1] etc. for all index-based settings 2012-10-28 17:23:35 +01:00
Alessandro Ranellucci
ccb49a8439 Do a slightly thinner interface layer at the top of support material structures by taking into account the diameter of bridge extrudates (nophead's idea) 2012-10-28 16:59:20 +01:00
Alessandro Ranellucci
b5bd216f5c Do not combine infill for bottom layer 2012-10-28 14:23:47 +01:00
Alessandro Ranellucci
f35cdef2aa Renamed ExtrusionPath->depth_layers to height 2012-10-28 14:22:51 +01:00
Alessandro Ranellucci
2796041a6c Bugfix: --top-solid-layers was ignored. #769 2012-10-28 12:52:53 +01:00
Alessandro Ranellucci
deea02b444 Descriptive textual feedback for cooling settings 2012-10-28 12:43:41 +01:00
Alessandro Ranellucci
f9b6caaecb Bugfix, last commit was incomplete 2012-10-28 12:22:30 +01:00
Alessandro Ranellucci
a0fe93e8cf Bugfix: sometimes first layer extrusion width was not applied 2012-10-28 10:28:40 +01:00
Alessandro Ranellucci
49916b6178 Revert 2bcac88683 by setting the scale factor manually to 1. #720 2012-10-27 22:09:22 +02:00
Alessandro Ranellucci
d0bee4bf41 Fixed regression in Split. #766 2012-10-27 21:39:57 +02:00
Alessandro Ranellucci
bc9ff848dd Removed unused 'propgrid' import group from Wx. #764 2012-10-27 21:21:18 +02:00
Alessandro Ranellucci
f9e20db156 Update t/dynamic.t 2012-10-27 21:20:32 +02:00
Alessandro Ranellucci
b0f24a2666 Bugfix: unnecessary tool changes were generated when using the same tool for subsequent parts 2012-10-25 18:49:59 +02:00
Alessandro Ranellucci
667d88603e Reorder some options using the more compact layout 2012-10-25 12:37:02 +02:00
Alessandro Ranellucci
cee3864fc9 Independently set number of top/bottom solid layers. #676 2012-10-25 12:21:04 +02:00
Alessandro Ranellucci
bbd7765f40 Refactored the options group building to allow for more flexible layouts 2012-10-25 11:24:56 +02:00
Alessandro Ranellucci
31c2e50fc6 Bugfix: bed temperature wasn't being set after the first layer when first layer bed temperature was set to zero. #760 2012-10-24 22:57:19 +02:00
Alessandro Ranellucci
50f6909475 Don't apply slowdown factor to bridges. #640 2012-10-24 22:55:03 +02:00
Alessandro Ranellucci
392af5542b Show object information when double-clicking it in the plater 2012-10-24 22:44:08 +02:00
Alessandro Ranellucci
304676b6aa Use XML::SAX::ExpatXS if available 2012-10-24 20:36:32 +02:00
Alessandro Ranellucci
3c8ac435ad Remember last used filament presets when using multiple extruders too 2012-10-24 20:24:11 +02:00
Alessandro Ranellucci
355031fe2f Remove unnecessary retractions 2012-10-24 19:38:18 +02:00
Alessandro Ranellucci
44016b38c5 Distribute skirt loops across all extruders 2012-10-24 19:13:40 +02:00
Alessandro Ranellucci
f0d2b0e5ea Avoid overlapping regions (thanks Mike Sheldrake!). #726 2012-10-24 16:46:40 +02:00
Alessandro Ranellucci
1c50c8a401 Merge branch 'dynamic-flow' 2012-10-24 16:19:13 +02:00
Alessandro Ranellucci
6beaf5e597 New faster algorithm for filling gaps, while we work on a new medial axis implementation 2012-10-24 16:17:09 +02:00
Alessandro Ranellucci
1445820673 External perimeter first on bottom layer when brim is enabled. #761 2012-10-24 12:04:44 +02:00
Alessandro Ranellucci
1627268fd4 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	lib/Slic3r/GCode.pm
 2012-10-24 11:49:31 +02:00
Alessandro Ranellucci
19e77a28a1 Merge branch 'master' into dynamic-flow 2012-10-24 10:55:57 +02:00
Alessandro Ranellucci
28b56ae840 Force unfocusing of all input fields when saving a preset, otherwise the currently focused one might be ignored. #750 #624 2012-10-22 16:03:08 +02:00
Alessandro Ranellucci
c793a2657f Replace Math::ConvexHull with Math::ConvexHull::MonotoneChain. #722 2012-10-22 15:29:54 +02:00
Alessandro Ranellucci
68c3a0dd61 Make arcs.t happy. #721 2012-10-22 14:08:27 +02:00
Alessandro Ranellucci
33b1970b95 Incomplete commit broke the plater on threaded perls 2012-10-22 14:02:58 +02:00
Alessandro Ranellucci
0990a9418c Bugfix: honeycomb infill was overlapping too much with perimeters. #732 2012-10-22 13:38:37 +02:00
Alessandro Ranellucci
3c7785aaf3 Useless extra perimeters were generated sometimes. #444 #732 2012-10-22 13:21:11 +02:00
Alessandro Ranellucci
76f75db055 Always specify tool number in M104/M109 when printing with multiple extruders 2012-10-21 21:44:06 +02:00
Alessandro Ranellucci
4f1b56f004 Fix regression causing the plater to merge all materials into a single one, thus not producing multi-extrusion prints 2012-10-21 20:56:19 +02:00
Alessandro Ranellucci
f5f9574173 Merge pull request #722 from mesheldrake/remove-dups-before-hull 
use remove_coinciding_points before convex_hull
 2012-10-15 02:49:30 -07:00
Alessandro Ranellucci
149d9e737b Merge pull request #721 from mesheldrake/parallel-degrees-limit 
parallel_degrees_limit decreased, 3 to 0.1, #704
 2012-10-15 02:48:16 -07:00
Alessandro Ranellucci
50161497f3 Merge pull request #720 from mesheldrake/increase-offset-scale 
Increase scale factor for Clipper::offset
 2012-10-15 02:47:16 -07:00
Alessandro Ranellucci
6b4f038d17 Update copies number when decreasing parts. #747 2012-10-15 10:59:54 +02:00
Alessandro Ranellucci
769134bb6f Fixed regression causing skirt ignoring the first layer extrusion width override. #728 2012-10-15 10:57:15 +02:00
Alessandro Ranellucci
8ac367bfa7 If brim overlaps with skirt, make brim around skirt too instead of just ignoring skirt on first layer 2012-10-14 22:10:49 +02:00
Alessandro Ranellucci
b92642459f Merge branch 'master' into dynamic-flow 
Conflicts:
	lib/Slic3r/Flow.pm
	lib/Slic3r/Layer.pm
 2012-10-04 15:23:19 +02:00
Alessandro Ranellucci
d1e0bcf113 Bugfix: tool numbers written in G-code were wrong 2012-10-01 18:22:35 +02:00
Alessandro Ranellucci
1a6eaeaa91 Bugfix: split wasn't working properly under threaded perls 2012-10-01 18:12:14 +02:00
Alessandro Ranellucci
2c400ee2b8 Removed useless warning 2012-10-01 16:49:02 +02:00
Alessandro Ranellucci
faaf6d90b8 Bump version number 2012-09-28 17:44:38 +02:00
Alessandro Ranellucci
6bb4c28b01 Release 0.9.3 2012-09-28 17:06:19 +02:00
Alessandro Ranellucci
86e3508402 Add menu item pointing to documentation 2012-09-28 16:58:03 +02:00
Alessandro Ranellucci
22b312395a Fix SVG/DLP support material. #673 2012-09-28 16:32:53 +02:00
Alessandro Ranellucci
c68862582c Fix fatal error on empty layers caused by recent large refactorings 2012-09-28 15:48:32 +02:00
Alessandro Ranellucci
ab7697ec1c New option to force a solid layer every given number of layers. #617 2012-09-28 15:46:29 +02:00
Alessandro Ranellucci
f50b0040ef Bugfix: the grow() method wasn't working properly, causing bad brim/support material interface. #639 2012-09-28 15:27:33 +02:00
Alessandro Ranellucci
9ee9b54c73 Output an error if user tries to use 100% density with a non-solid fill pattern. #691 2012-09-28 14:13:06 +02:00
Alessandro Ranellucci
a49b045ce4 Do not call srand for each layer, to get better randomization of starting points. #694 2012-09-28 14:01:59 +02:00
Mike Sheldrake
4b91496edd use remove_coinciding_points before convex_hull 
convex_hull returns polygons with sharp concaves sometimes when
duplicate points are present
 2012-09-27 06:47:38 -07:00
Mike Sheldrake
5ee68aa916 $parallel_degrees_limit decreased, 3 to 0.1, #704 
Geometry::lines_parallel() test used for collapsing adjacent colinear
lines was too loose in testing for colinearity, because of this constant
setting. Gradualy curving and high-res outer perimiters would
over-simplify into straight lines.
 2012-09-27 06:14:54 -07:00
Mike Sheldrake
2bcac88683 Increase scale factor for Clipper::offset 
A default scale of 1 was being calculated most of the time. That's too
low to avoid artifacts from offsetting concave curves. Setting scale to
a default of 100000 eliminates artifacts in the test cases in issues
#700, #702 and #703. There is a risk of large point proliferation with
this scale in combination with the JT_ROUND option, but in the four
places where that option is used, scale is already explicitly set to a
safer low value.
 2012-09-27 05:50:54 -07:00
Alessandro Ranellucci
fd74577eae Fix typo in previous commit 2012-09-24 21:00:26 +02:00
Alessandro Ranellucci
d8c192ae05 Fix fatal error caused by recent refactorings 2012-09-23 18:07:44 +02:00
Alessandro Ranellucci
1f4706f02f [print_preset] and others were erroneously renamed to [print] etc. #675 2012-09-23 17:40:34 +02:00
Alessandro Ranellucci
77625894ff New command to combine multiple STL files into a single multi-material AMF file 2012-09-23 14:48:58 +02:00
Alessandro Ranellucci
bbe0a45b58 Optimization: cache scaled flow width and spacing 2012-09-23 03:03:08 +02:00
Alessandro Ranellucci
ec0d3987db Rename materials to regions 2012-09-23 02:52:31 +02:00
Alessandro Ranellucci
e696764af8 Assign extruders and flows to materials 2012-09-23 02:40:25 +02:00
Alessandro Ranellucci
e2ab340edb Fix positioning and other things 2012-09-22 21:03:57 +02:00
Alessandro Ranellucci
d488afd243 More work (breaks centering and internal surfaces detection) 2012-09-22 19:38:25 +02:00
Alessandro Ranellucci
02356fd613 Large refactoring to allow processing multimaterial files 2012-09-22 19:04:36 +02:00
Alessandro Ranellucci
04be94023b Refactoring: move the 'copies' property to each Print::Object 2012-09-22 16:19:24 +02:00
Alessandro Ranellucci
82ac4722d2 Refactoring, new size_3D function 2012-09-22 16:12:54 +02:00
Alessandro Ranellucci
b5672de3ca Refactoring, new bounding_box_3D function 2012-09-22 16:10:24 +02:00
Alessandro Ranellucci
91e9f651b5 Bugfix: --avoid-crossing-perimeters was crashing when processing empty layers 2012-09-22 15:51:18 +02:00
Alessandro Ranellucci
35e449e891 Make new plater compatible with threaded perls 2012-09-21 17:45:54 +02:00
Alessandro Ranellucci
037be34b7b Bugfix: removed fatal error when generating SVG support material in some circumstances. #673 2012-09-21 16:52:05 +02:00
Alessandro Ranellucci
c6c7dd12da Silently ignore threads > 1 on non-threaded perls 2012-09-21 16:43:46 +02:00
Alessandro Ranellucci
27b71d8885 Little regressions after recent merge 2012-09-21 16:08:22 +02:00
Alessandro Ranellucci
392309a369 Little cleanup 2012-09-21 15:58:44 +02:00
Alessandro Ranellucci
e21fdf0b15 Little cleanup 2012-09-21 15:47:38 +02:00
Alessandro Ranellucci
2f1ae3f112 Restore non-manifold warnings 2012-09-21 15:46:40 +02:00
Alessandro Ranellucci
c95cd5ac38 Merge branch 'master' into avoid-crossing-perimeters 2012-09-21 15:36:45 +02:00
Alessandro Ranellucci
46cbdcdc4e Merge branch 'master' into dynamic-flow 2012-09-21 15:36:33 +02:00
Alessandro Ranellucci
f638558167 Preserve position when splitting objects in plater 2012-09-21 15:35:32 +02:00
Alessandro Ranellucci
e40f32995f Finish GUI decoupling 2012-09-21 15:04:33 +02:00
Alessandro Ranellucci
8382eeef0a Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)" 
This reverts commit f4260ae93d.
 2012-09-21 15:04:19 +02:00
Alessandro Ranellucci
f659dcf088 Patch for --gcode-arcs (kindly submitted by Paul Howes) 2012-09-21 15:04:19 +02:00
Alessandro Ranellucci
757515ba17 New [print_preset], [filament_preset] and [printer_preset] variables. #675 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
4fbb8ffb9d Replace 'scale epsilon' with 'scaled_epsilon' 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
87912cb3b0 Bugfix: only_retract_when_crossing_perimeters was almost not working. #680 2012-09-21 15:04:18 +02:00
Alessandro Ranellucci
f314cedd8f Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
d848e2d4c9 Warn the user when Slic3r is being run under 5.16 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
e89f64e9d3 More unfinished work 2012-09-21 15:04:17 +02:00
Alessandro Ranellucci
6adf98edaf Fix regression causing SVG/DLP support material to crash the application. #668 2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
37ae2e1e2d Use support material extruder for brim. #653 2012-09-21 15:04:16 +02:00
Alessandro Ranellucci
3b38e392ad Consider single walls as external perimeters. #661 2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
47c5d410ea Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655 2012-09-21 15:04:15 +02:00
Alessandro Ranellucci
152c714b87 Bump version number 2012-09-21 15:04:13 +02:00
Alessandro Ranellucci
d7e801fd32 Releasing 0.9.2 2012-09-21 15:04:13 +02:00
Alessandro Ranellucci
202bfa91c8 Adjust M-codes for temperature handling for Teacup. #539 2012-09-21 15:04:12 +02:00
Alessandro Ranellucci
94a096f1d2 Support legacy config files not containing first_layer_height #631 2012-09-21 15:04:11 +02:00
Alessandro Ranellucci
1cedb00f20 Merge branch 'master' into dynamic-flow 
Conflicts:
	lib/Slic3r/ExPolygon.pm
 2012-09-12 16:05:06 +02:00
Alessandro Ranellucci
cc8d8bd26f Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	README.markdown
	lib/Slic3r/Config.pm
	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
	slic3r.pl
 2012-09-12 16:04:16 +02:00
Alessandro Ranellucci
2a51cad0c3 Revert "Patch for --gcode-arcs (kindly submitted by Paul Howes)" 
This reverts commit f4260ae93d.
 2012-09-12 15:58:01 +02:00
Alessandro Ranellucci
f4260ae93d Patch for --gcode-arcs (kindly submitted by Paul Howes) 2012-09-12 15:53:24 +02:00
Alessandro Ranellucci
7a5071f66c New [print_preset], [filament_preset] and [printer_preset] variables. #675 2012-09-12 15:29:44 +02:00
Alessandro Ranellucci
e0d5f4e528 Replace 'scale epsilon' with 'scaled_epsilon' 2012-09-12 15:22:43 +02:00
Alessandro Ranellucci
9934f8957f Bugfix: only_retract_when_crossing_perimeters was almost not working. #680 2012-09-12 15:20:37 +02:00
Alessandro Ranellucci
bb5f00cf0c Bugfix: extrusion width setting for support material was only affecting the path spacing but not the actual flow. #666 2012-09-12 12:13:43 +02:00
Alessandro Ranellucci
36796645cb Warn the user when Slic3r is being run under 5.16 2012-09-11 16:02:26 +02:00
Alessandro Ranellucci
628cc52338 Fix regression causing SVG/DLP support material to crash the application. #668 2012-09-06 11:28:24 +02:00
Alessandro Ranellucci
f41a6af343 Use support material extruder for brim. #653 2012-09-06 11:01:44 +02:00
Alessandro Ranellucci
1053947c19 Consider single walls as external perimeters. #661 2012-09-06 10:56:42 +02:00
Alessandro Ranellucci
e0a96c00b3 Remove the initial retraction compensation. Not only it is not very good for multi-head setups, but it also caused wrong first layer Z when lift was enabled. #655 2012-09-06 10:44:48 +02:00
Alessandro Ranellucci
8d7b781473 Bump version number 2012-08-31 00:12:13 +02:00
Alessandro Ranellucci
25f647a60c Releasing 0.9.2 2012-08-30 23:15:42 +02:00
Alessandro Ranellucci
5017f17171 Adjust M-codes for temperature handling for Teacup. #539 2012-08-30 23:13:28 +02:00
Alessandro Ranellucci
b37af86bef Support legacy config files not containing first_layer_height #631 2012-08-30 23:04:56 +02:00
Alessandro Ranellucci
191de5d078 Unfinished work for decoupling GUI from the Print object (goal = more speed for manipulation, less memory usage) 2012-08-29 19:37:27 +02:00
Alessandro Ranellucci
f29d455319 Refactor the AMF parser so that it popolates a Model object directly. Also read constellations 2012-08-29 18:23:34 +02:00
Alessandro Ranellucci
23f6842bd4 Export plates as AMF constellations 2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
f90520ed06 Refactoring: new Slic3r::Model class to represent files 2012-08-29 17:12:32 +02:00
Alessandro Ranellucci
9bd1b0f6ba Revert "Refactoring: initialize all layers at once and avoid duplication of slicing height math". #637 
This reverts commit 08270022dd.
 2012-08-26 17:47:00 +02:00
Alessandro Ranellucci
08270022dd Refactoring: initialize all layers at once and avoid duplication of slicing height math 2012-08-25 20:40:44 +02:00
Alessandro Ranellucci
a1a4d97f9f Remove useless subroutines 2012-08-25 20:14:52 +02:00
Alessandro Ranellucci
a1ac866b84 Refactoring: turn x_length and y_length in size 2012-08-25 20:14:01 +02:00
Alessandro Ranellucci
896641cb7e Fixed regression causing some bridges not to be detected correctly. #629 2012-08-25 20:04:29 +02:00
Alessandro Ranellucci
fe6c8fabdb Make Josef Prusa and Petr Ledvinka happy while we figure out how to handle localized Windows file paths 2012-08-25 19:06:14 +02:00
Alessandro Ranellucci
873ea93832 Fix missing module inclusion preventing the recently introduced option from working 2012-08-25 17:18:12 +02:00
Alessandro Ranellucci
0c22250740 New option to disable retraction when moving between infill paths inside the same island. #29 2012-08-25 16:30:11 +02:00
Alessandro Ranellucci
af1b64a086 Added unit testing to prevent regression about disconnected infill paths 2012-08-25 14:59:34 +02:00
Alessandro Ranellucci
d061534b83 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	README.markdown
	lib/Slic3r/ExPolygon.pm
	slic3r.pl
 2012-08-25 14:26:32 +02:00
Alessandro Ranellucci
0aa224ffad Dynamic extrusion width for better gap filling 2012-08-25 14:23:46 +02:00
Alessandro Ranellucci
65b11fa850 Minor refactoring for better readability of perimeter generation logic 2012-08-24 21:58:51 +02:00
Alessandro Ranellucci
92518d28fc New option to configure the threshold for enforcing solid infill. #224 2012-08-24 19:38:36 +02:00
Alessandro Ranellucci
ba58e0733f Avoid backwards moves when doing honeycomb infill. #492 2012-08-24 19:19:45 +02:00
Alessandro Ranellucci
5281b101f9 Some infill paths were still disconnected, causing unnecessary retractions 2012-08-24 18:59:23 +02:00
Alessandro Ranellucci
56a118986f External motion was crossing still too much 2012-08-23 21:19:10 +02:00
Alessandro Ranellucci
c98e9515ed Better implementation of the external motion planner 2012-08-23 21:10:04 +02:00
Alessandro Ranellucci
27090f83bd Make the motionplanner work again after recent changes to approximation 2012-08-23 17:02:50 +02:00
Alessandro Ranellucci
ee41345ab0 Remove useless Point->id method 2012-08-23 15:46:55 +02:00
Alessandro Ranellucci
0eadc5adba Manual rebase of the avoid_crossing_perimeters feature 2012-08-23 15:42:58 +02:00
Alessandro Ranellucci
d278998f11 Accept newline as separator for post-processing scripts in GUI. #615 2012-08-22 21:27:49 +02:00
Alessandro Ranellucci
b35c41c1a3 Bugfix: retraction was still not working correctly at tool change 2012-08-22 20:31:03 +02:00
Alessandro Ranellucci
edfdf236da Fix for the recent commit about the new retraction settings 2012-08-22 19:47:59 +02:00
Alessandro Ranellucci
4bddb66513 Always emit T0 at the beginning of a multi-extruder print 2012-08-22 19:20:34 +02:00
Alessandro Ranellucci
9e682924c7 New separate options for retraction length to be used when switching tools 2012-08-22 19:11:45 +02:00
Alessandro Ranellucci
075213c731 Refactoring: make 'retracted' an attribute of the Extruder object 2012-08-22 18:57:03 +02:00
Alessandro Ranellucci
97c3756034 Don't force automatic unretraction after tool change 2012-08-22 18:06:50 +02:00
Alessandro Ranellucci
3c2464abf9 Bugfix: crazy temperatures were written when using sequential printing. #625 2012-08-22 17:58:38 +02:00
Alessandro Ranellucci
26e033a30c Bugfix: brim was positioned incorrectly if no skirt was enabled. #627 2012-08-19 20:30:17 +02:00
Henrik Brix Andersen
d6b06e08bc Bump version number 2012-08-19 09:49:43 +02:00
Nicolas Dandrimont
a147530d2a Explicitly avoid passing arguments to remove when called from the event handler 
Wx passes some objects to the callbacks, and we want to ignore those.
 2012-08-11 16:05:17 +02:00
Nicolas Dandrimont
7b0d4cb4e1 Revert "Dereference the Wx object id when removing an object in the plater." 
This reverts commit 4979029cd2.
 2012-08-11 16:00:41 +02:00
Nicolas Dandrimont
4979029cd2 Dereference the Wx object id when removing an object in the plater. 2012-08-11 15:49:06 +02:00
Alessandro Ranellucci
0833b4e021 Releasing 0.9.1 2012-08-10 16:14:35 +02:00
Alessandro Ranellucci
624e16b7e2 Unexpected results splitting objects with threaded perls. #610 2012-08-10 16:05:16 +02:00
Henrik Brix Andersen
2576e3b00a Remove XXX debug output 2012-08-09 23:37:15 +02:00
Alessandro Ranellucci
8289692160 Handle configuration files saved while there was no extruder_offset control for the first extruder 2012-08-09 19:57:49 +02:00
Alessandro Ranellucci
d02012e4a3 Accept multiple --load arguments for GUI too 2012-08-09 00:59:41 +02:00
Alessandro Ranellucci
db8bb8c3d8 Revert "Hide extruder offset settings for the primary extruder" 
This reverts commit 713d87b4c6.
 2012-08-09 00:51:53 +02:00
Alessandro Ranellucci
2bf219a637 Bugfix: random failure to load presets. #600 2012-08-09 00:41:03 +02:00
Alessandro Ranellucci
927b7ce937 Bugfix: skirt height and other options shouldn't be limited to 100. #597 2012-08-08 23:51:40 +02:00
Alessandro Ranellucci
88cbae0d48 Bugfix: saving a printer preset with less extruders than it had resulted in the same number of extruders as before 2012-08-08 22:52:26 +02:00
Alessandro Ranellucci
713d87b4c6 Hide extruder offset settings for the primary extruder 2012-08-08 22:14:05 +02:00
Alessandro Ranellucci
9ca21c835c Merge branch 'per-extruder-retraction-settings' 
Conflicts:
	lib/Slic3r/Config.pm
	lib/Slic3r/GUI/Tab.pm
 2012-08-08 22:06:47 +02:00
Alessandro Ranellucci
55b3b4f0c5 Bump version number 2012-08-08 22:04:06 +02:00
Henrik Brix Andersen
e2b2e369f8 Disable using ENTER key for accessing "Export G-code..." button. 2012-08-08 21:45:17 +02:00
Alessandro Ranellucci
4fcecf5ef6 Bugfix: when an external config was selected in any section, exported settings didn't reflect other sections properly 2012-08-08 19:36:34 +02:00
Alessandro Ranellucci
2f2bc8210a Allow exporting to .g files too 2012-08-08 19:04:36 +02:00
Alessandro Ranellucci
3888727b96 Bugfix: legacy config files with empty temperature and/or first_layer_temperature caused crash 2012-08-08 16:25:13 +02:00
Alessandro Ranellucci
b048f51edd Incomplete label for support material extruder option. #593 2012-08-08 15:21:02 +02:00
Alessandro Ranellucci
d4d305db3b Releasing 0.9.0 2012-08-08 12:29:15 +02:00
Henrik Brix Andersen
0f327ef912 Add missing use File::Spec 2012-08-07 23:37:16 +02:00
Alessandro Ranellucci
c7858912d8 Bugfix: some paths were not considered when generating brim 2012-08-07 22:04:58 +02:00
Alessandro Ranellucci
866b09f3f9 New --extruder-offset option 2012-08-07 21:39:45 +02:00
Alessandro Ranellucci
a2c28fd6da Move retraction settings to a temporary page until we merge the per-extruder-retraction-settings branch 2012-08-07 21:11:58 +02:00
Alessandro Ranellucci
cf01c142de Make retraction configurable for each extruder 2012-08-07 21:08:56 +02:00
Henrik Brix Andersen
640c07a233 Revert 4099c3a8cf 
Presenting detailed statistics about a given slice needs rethinking, as this solution will not scale.
 2012-08-07 21:00:03 +02:00
Alessandro Ranellucci
63e77fcfd8 Refactor extruder settings 2012-08-07 20:50:54 +02:00
Alessandro Ranellucci
106c8fe46f Minor reordering of infill options in GUI; also hide the entire staticbox if threads are not available 2012-08-07 20:22:26 +02:00
Alessandro Ranellucci
2548d5b993 Expose all multi-extruder settings to the GUI 2012-08-07 20:14:28 +02:00
Alessandro Ranellucci
793301d319 Allow to select multiple filaments in GUI when multiple extruders are configured 2012-08-07 18:44:47 +02:00
Alessandro Ranellucci
b7d8444ac8 Take support material into account when generating brim. #490 #501 #567 2012-08-06 20:54:49 +02:00
Alessandro Ranellucci
9bfa4118a1 Bugfix: brim and skirt collision was not precisely detected when they had similar offsets. #548 2012-08-06 20:27:10 +02:00
Alessandro Ranellucci
2616c24ffc Bugfix: plater wasn't initialized with last settings. #573 2012-08-06 19:19:22 +02:00
QuantumConcepts
6bcbc743dd Fixed #586. 2012-08-06 08:23:00 -04:00
Alessandro Ranellucci
a8e9b6926a Bugfix: each tab was loading too much from external config files 2012-08-06 13:03:44 +02:00
Henrik Brix Andersen
49b048c61d Include Wx version number in debug output 2012-08-04 22:19:42 +02:00
Henrik Brix Andersen
b1805ed7f3 Align controls and their associated labels vertically centered. 2012-08-02 23:44:42 +02:00
Henrik Brix Andersen
5518ac9fa6 Add small border on non-wxMAC platforms. Needs testing with wxWidgets 2.9.x on wxMSW + wxGTK. 2012-08-02 23:19:04 +02:00
Henrik Brix Andersen
c1e2bc5bd7 Make the wizard a tiny bit wider to fit the gcode_flavor drop-down under OS X. 2012-08-02 23:08:40 +02:00
Henrik Brix Andersen
ed89038f0b Add work-around for "Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17". #558 2012-08-02 23:07:42 +02:00
Henrik Brix Andersen
794a090892 Pass explicit tool IDs to ::EnableTool() 2012-08-02 21:49:26 +02:00
Henrik Brix Andersen
69fa308f55 Allocate wxWidget identifiers dynamically to avoid potential conflics. 2012-08-02 21:11:36 +02:00
Henrik Brix Andersen
0e620f3ad2 Make --output accept directories. #535 2012-08-01 17:12:16 +02:00
Henrik Brix Andersen
d1b8f37dda Call print->config before print->expanded_output_filepath. #573 2012-08-01 16:06:03 +02:00
Henrik Brix Andersen
65d6eb551a Try harder to attract user attention on wxMAC. #575 2012-08-01 13:59:43 +02:00
Henrik Brix Andersen
83fccf0875 Fix auto-arrange of objects 2012-07-30 19:30:41 +02:00
Henrik Brix Andersen
0aae15e2a8 Persist last skein directory and last config directory used across application restarts. 2012-07-30 12:08:28 +02:00
Alessandro Ranellucci
0e39a89d01 Fixed regression preventing split from working. #395 2012-07-30 10:00:25 +02:00
Sam Wong
4099c3a8cf #568: Show filament needed statistics in the GUI message box. 2012-07-30 01:24:51 +08:00
Alessandro Ranellucci
4c33eabc6e Slicing from plater was still using the default options 2012-07-29 17:02:46 +02:00
Alessandro Ranellucci
9933132ae6 Bugfix: recent refactoring broke slicing from plater on multi-threaded perls 2012-07-29 15:51:26 +02:00
Alessandro Ranellucci
92754d7cd4 Fix multi-extruder options in GUI 2012-07-28 11:53:10 +02:00
Alessandro Ranellucci
87934a972c Port recent global changes to the wizard 2012-07-28 11:34:12 +02:00
Alessandro Ranellucci
c763f5fc81 Bugfix: fatal error with thin loops after recent refactoring. #562 2012-07-28 11:06:27 +02:00
Henrik Brix Andersen
57b134cc9c Handle recursive ratio_over options correctly. 2012-07-27 22:56:35 +02:00
Henrik Brix Andersen
d68ab84faa Fix quick slicing 2012-07-27 22:03:48 +02:00
Alessandro Ranellucci
7e34244b05 Refactored configuration handling. 
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
 2012-07-27 21:16:11 +02:00
Henrik Brix Andersen
f0579e59bd Include timestamp in .ini files 2012-07-27 14:33:14 +02:00
Henrik Brix Andersen
9f719d42bc Include preset name in confirmation dialog 2012-07-27 14:11:04 +02:00
Henrik Brix Andersen
9e1308c03f Ask for confirmation when deselecting a dirty preset. 2012-07-27 13:57:58 +02:00
Henrik Brix Andersen
848784ad95 Clear dirty when deleting preset. 2012-07-27 13:56:52 +02:00
Henrik Brix Andersen
40f1176346 Be careful not to change the current selection when working around http://trac.wxwidgets.org/ticket/13769 2012-07-27 13:54:45 +02:00
Henrik Brix Andersen
1cc0a79188 Allow the list and buttons to expand upon window resize 2012-07-26 16:50:57 +02:00