3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
13,446 Commits 1 Branch 1 Tag 249 MiB
c81d87b470
Commit Graph

235 Commits

Author SHA1 Message Date
Lukas Matena
08cb5bc2c7 Wipe tower uses correct gcodes for RepRap gcode flavor (M907->M906, M900->M572 - should fix #1843) 
Also, fixed proper setting of the extruder current during toolchange (was broken since 6da83c7)
 2019-04-24 12:09:58 +02:00
bubnikv
d83a013d6b Export of filament statistics into G-code for multi-material prints 
has been rewritten to be easier to parse.

Old format
; filament used = 19248.8mm (46.3cm3)
; filament used = 57.4
; filament cost = 1.5
; filament used = 8007.6mm (19.3cm3)
; filament used = 23.9
; filament cost = 0.6
; filament used = 0.0mm (0.0cm3)
; filament used = 0.0mm (0.0cm3)
; filament used = 0.0mm (0.0cm3)
; total filament cost = 2.1

New format
; filament used [mm] = 1600.7,1600.7,1600.7,1600.7,1600.7
; filament used [cm3] = 3.9,3.9,3.9,3.9,3.9
; filament used [g] = 4.8,4.8,4.8,4.8,4.8
; filament cost = 1.5,1.5,1.5,1.5,1.5
; total filament used [g] = 24.0
; total filament cost = 7.5

Where the non-printing extruders are filled in with zeros, and
the trailing non-printing extruders are not exported.

; filament used [g]
and
; filament cost
are only printed if non zero (material density and cost are defined)
 2019-04-16 14:25:50 +02:00
Enrico Turri
ea3d30bff1 Fix of #2082 -> Added lines M73 P100 and M73 Q100 to gcode to signal that print is finished 2019-04-08 11:54:58 +02:00
bubnikv
e0e1e2b682 Improved SLA layer view: Low layer shall be rendered from the slice above, 
triangulated slices are shifted slightly away from the clipping planes.

FDM: Ported a "(bridged)" G-code comment from upstream.
 2019-03-26 10:38:50 +01:00
Enrico Turri
f5b5e48ad7 Added cancel mechanism to GCodeAnalyzer::calc_gcode_preview_data() 2019-03-12 11:57:39 +01:00
Enrico Turri
219ea04c23 Fix of #1812 (GCode Anayzer take in account extruder offsets for multiextruder printers) 2019-03-06 10:22:10 +01:00
Enrico Turri
8a29ec2204 GCode Anayzer take in account extruder offsets 2019-03-05 15:03:56 +01:00
Enrico Turri
8a6d29f7d8 Workaround to fix inconsistencies of width of gcode preview extrusion paths 2019-03-01 09:55:43 +01:00
bubnikv
a56f7d60e5 Fixed an issue, where the output G-code file name was not always updated 
from the current Model/ModelObjects.
Fixed a possible race condition in updating Print::m_placeholder_parser
with the proposed filename / filename base.
Improved documentation (source code comments).
 2019-02-03 10:41:14 +01:00
bubnikv
c82d346c1a Fixed a bug in initialization of some StaticPrintConfig derived classes. 
Merged implementation of support for "Octoprint-Cancelobject" #972
thanks @supermerill
 2019-01-31 15:09:16 +01:00
bubnikv
57bd0889c3 Disabled the experimental pressure equalizer. 2019-01-29 18:07:45 +01:00
bubnikv
aaaffd7f90 Fixes Add [layer_num] and [layer_z] to Custom Tool change G-code #1651 2019-01-29 12:02:48 +01:00
Lukas Matena
ed1aad9de4 PURGING FINISHED gcode comment only emitted on layers where some purging was happening 2019-01-21 14:05:28 +01:00
bubnikv
54299d8eb0 Fix of https://github.com/prusa3d/Slic3r/issues/1631 
This is a fix of a long standing bug, where an extrusion is incorrectly
drawn from the end of the last wipe move. Interestingly enough,
this bug is in Slic3r at least since 1.2.9, but lucky enough
it only occured for single perimeter, no infill prints with wipe after
retract enabled, and only if the two successive slices were discretized
exactly the same, which is quite unlikely.
 2019-01-14 19:57:41 +01:00
bubnikv
2f4adc1906 Implemented [filament_extruder_id] placeholder #1568 2019-01-07 15:12:40 +01:00
bubnikv
026bc801e3 Fix of #1505, #1541 
Fixed a regression issue in initialization of the "Avoid external perimeters"
feature.
 2019-01-07 12:20:48 +01:00
bubnikv
567b367061 Disabled the print bed mesh temporarily, 
bumped up the build version to alpha2,
fixed one minor issue in G-code generator
 2019-01-04 16:48:41 +01:00
bubnikv
8bc04e640a The G-code export was reshuffled a bit to reduce peak memory consumption. 
Namely, the time estimate memory is released before the G-code
preview data is created from the G-code analyser data.
 2018-12-18 17:34:21 +01:00
bubnikv
1e6900afa2 Logging of memory usage for the GCodeAnalyzer and GCodePreviewData. 2018-12-18 15:55:45 +01:00
bubnikv
bffcaeff41 Time estimator: Added consumed memory tracing, replaced std::map 
with std::vector for lower memory consumption.
 2018-12-18 14:10:31 +01:00
bubnikv
771928d916 Logging of memory allocations on Windows during the slicing process 
when the SLIC3R_LOGLEVEL >= info.
 2018-12-18 11:31:41 +01:00
bubnikv
9f43e7d375 Fixed a harless assert in PrintObject consturctor. 
Fixed a bug in G-code generator regarding the seam hiding.
 2018-12-07 11:21:05 +01:00
bubnikv
c586ca4ae0 Implemented compatible_printer / compatible_printer_condition 
for filaments and SLA materials.

Fixed compatible_printers / compatible_prints dialog to show
system profiles as well.
 2018-12-04 17:56:49 +01:00
YuSanka
c010e14460 Suppress ColorPrint for the multi-material printing 2018-11-28 16:03:25 +01:00
YuSanka
360133246c Fixed ColorPrint current layer identification 2018-11-28 16:03:24 +01:00
YuSanka
f8bc7cb959 Implementation of the "ColorPrint" on the 3DScene 2018-11-26 16:28:12 +01:00
YuSanka
2fa055903f "SLA Print Settings" implementation (start) 2018-11-19 14:05:29 +01:00
bubnikv
c2e46350f2 Separated Print / PrintObject into PrintBase.cpp/h to support SLAPrint 2018-11-08 14:23:17 +01:00
Lukas Matena
377350db33 When iterating over PrintObject regions, use PrintObject::region_volumes (see also yesterday's commit 3eea327) 2018-11-07 15:17:29 +01:00
Lukas Matena
9ca9e2a545 Merge branch lm_colorprint_integration into dev_native + deleting ticks outside slider range 2018-11-07 14:44:47 +01:00
bubnikv
3eea327ef0 WIP: When iterating over PrintObject's regions, use the region count 
by PrintObject::region_volumes. This is due to the way Print::apply()
works, it does not invalidate an existing PrintObject if a new region
is added to the print.
 2018-11-06 15:31:26 +01:00
bubnikv
fd1c5dd218 WIP: SL1 profiles, SL1 in wizard, switching between FFF / SLA 2018-10-31 16:22:36 +01:00
bubnikv
a45e9c0a03 WIP: Slicing from GUI. 2018-10-18 18:06:40 +02:00
bubnikv
1f4c758e71 Logging of G-code processing 2018-09-25 16:57:18 +02:00
bubnikv
0558b53493 WIP: Moved sources int src/, separated most of the source code from Perl. 
The XS was left only for the unit / integration tests, and it links
libslic3r only. No wxWidgets are allowed to be used from Perl starting
from now.
 2018-09-19 11:02:24 +02:00