Alessandro Ranellucci
|
641c2a241b
|
Write Slic3r version in config files
|
2012-07-01 18:53:01 +02:00 |
|
Mark Hindess
|
07f2dab5f6
|
Fix perimeters_* options to be singular to be consistent.
|
2012-06-30 23:18:15 +01:00 |
|
Alessandro Ranellucci
|
fb96cdec76
|
Command line options to assign perimeters and infill to different extruders
|
2012-06-28 16:48:56 +02:00 |
|
Alessandro Ranellucci
|
80501d5b3c
|
New option to customize support material extrusion width
|
2012-06-28 16:33:07 +02:00 |
|
Alessandro Ranellucci
|
f9f2361acb
|
Allow setting different temperatures and first layer temperatures for each extruder. Also make support material extruder selection compatible with the new architecture
|
2012-06-28 16:22:11 +02:00 |
|
Alessandro Ranellucci
|
dbcfebeb66
|
Rename support_material_tool to support_material_extruder
|
2012-06-28 15:14:27 +02:00 |
|
Alessandro Ranellucci
|
3e8bc73fcb
|
Fix typo in previous commit
|
2012-06-28 14:49:20 +02:00 |
|
Alessandro Ranellucci
|
898266fd34
|
Initial refactoring for supporting multiple extruders. Little speed optimization included
|
2012-06-28 14:44:54 +02:00 |
|
Alessandro Ranellucci
|
47a07a86ee
|
Bugfix: GUI was unable to update flow settings
|
2012-06-27 19:49:53 +02:00 |
|
Alessandro Ranellucci
|
96a3234eaa
|
Different speed for external perimeters. #488
|
2012-06-27 19:42:16 +02:00 |
|
Alessandro Ranellucci
|
a6dca1d82a
|
New option for support material pattern spacing; also, fixes and speedups to the overhang detection
|
2012-06-24 14:39:35 +02:00 |
|
Alessandro Ranellucci
|
36753d85b7
|
New option to define the overhang threshold angle for support material generation
|
2012-06-23 23:54:39 +02:00 |
|
Alessandro Ranellucci
|
bf1aba3d08
|
New --support-material-pattern and --support-material-angle options
|
2012-06-23 22:43:23 +02:00 |
|
Alessandro Ranellucci
|
e72bd56b9d
|
Rename brim_thickness to brim_width
|
2012-06-23 22:27:59 +02:00 |
|
Alessandro Ranellucci
|
a9d480f7bf
|
Bugfix: first layer extrusion width was computed on general layer height rather than first layer height. #465
|
2012-06-23 21:45:18 +02:00 |
|
Alessandro Ranellucci
|
48addf8c3f
|
New feature: brim. #424
|
2012-06-23 21:31:29 +02:00 |
|
Alessandro Ranellucci
|
410279823c
|
New separate option to control the addition of automatic extra perimeters. Also, add none if perimeters are set to 0. #459
|
2012-06-23 17:10:30 +02:00 |
|
Henrik Brix Andersen
|
8fcf24a766
|
Merge pull request #467 from henrikbrixandersen/ratio-options
Two small ratio option improvements/bug fixes
|
2012-06-19 06:44:16 -07:00 |
|
Henrik Brix Andersen
|
4031cf26b4
|
- Add Slic3r::Config::get_raw() for getting the raw, uncalculated values.
- Use get_raw() for saving and displaying options in GUI
|
2012-06-19 15:32:56 +02:00 |
|
Henrik Brix Andersen
|
8d25e6490a
|
Set CLI option type to 'string' for all options allowing ratio inputs
|
2012-06-19 11:38:12 +02:00 |
|
Henrik Brix Andersen
|
b7d2860d5b
|
Allow negating bool cli options by using '--no-foo' or '--nofoo'
|
2012-06-18 23:39:53 +02:00 |
|
Alessandro Ranellucci
|
71c1c66985
|
Label and CLI option were wrong for top_solid_infill_speed. #425
|
2012-06-11 13:45:03 +02:00 |
|
Alessandro Ranellucci
|
3e94add8a8
|
Pass config options as environment variables to post-processing scripts
|
2012-06-09 17:52:03 +02:00 |
|
Alessandro Ranellucci
|
caa32ab282
|
Fixed regression causing flow errors when using legacy config files. #421
|
2012-06-07 11:24:45 +02:00 |
|
Alessandro Ranellucci
|
709c444976
|
Fixed fatal error when using --first-layer-extrusion-width
|
2012-06-07 11:17:35 +02:00 |
|
Alessandro Ranellucci
|
fbfbfac2b6
|
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
|
2012-06-06 19:59:20 +02:00 |
|
Alessandro Ranellucci
|
c7af74884f
|
Legacy config files were not correctly supported
|
2012-06-06 18:47:11 +02:00 |
|
Alessandro Ranellucci
|
82dd3c7a3e
|
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
|
2012-06-06 18:05:03 +02:00 |
|
Alessandro Ranellucci
|
8a031fe501
|
New --first-layer-extrusion-width option. #385
|
2012-06-06 17:29:12 +02:00 |
|
Alessandro Ranellucci
|
16b774603c
|
Accept either absolute or relative values for --first-layer-height. #151
|
2012-06-06 16:11:38 +02:00 |
|
Alessandro Ranellucci
|
896c7e952e
|
Renamed bottom_layer_speed to first_layer_speed for consistency
|
2012-06-06 15:52:21 +02:00 |
|
Alessandro Ranellucci
|
4a188f8566
|
Support for legacy config files containing bottom_layer_speed_ratio. #151
|
2012-06-06 15:48:14 +02:00 |
|
Alessandro Ranellucci
|
91ffb74429
|
Accept either absolute or relative values for --bottom-layer-speed. #151
|
2012-06-06 15:43:54 +02:00 |
|
Alessandro Ranellucci
|
aedb6cc35f
|
Accept both relative and absolute extrusion width values. #151
|
2012-06-06 15:23:34 +02:00 |
|
Josh McCullough
|
9da034a042
|
fixes #409
|
2012-06-05 10:55:02 +02:00 |
|
Alessandro Ranellucci
|
5a78111efa
|
Options to set extruder clearance for sequential printing and graphical preview of collisions
|
2012-05-23 11:47:52 +02:00 |
|
Alessandro Ranellucci
|
ce6b4aeaee
|
New option to print each object completely before moving onto next one (watch out for extruder collisions, Slic3r isn't doing any check since it doesn't know its shape)
|
2012-05-20 20:08:59 +02:00 |
|
Alessandro Ranellucci
|
67a076b360
|
Removing warnings here and there
|
2012-05-20 17:21:31 +02:00 |
|
Alessandro Ranellucci
|
159ca3f65e
|
Accept --threads 1 on non-threaded perls too
|
2012-05-19 23:18:29 +02:00 |
|
Alessandro Ranellucci
|
fa4f2c8b97
|
New option to randomize starting points across layers
|
2012-05-19 22:36:29 +02:00 |
|
Alessandro Ranellucci
|
8fe5d11624
|
Set number of threads from GUI and save it in config files. #154
|
2012-05-19 15:08:32 +02:00 |
|
Alessandro Ranellucci
|
7ee08be0b8
|
Allow [version], [timestamp], [year], [month], [day], [hour], [minute], [second] in filenames. #318
|
2012-05-01 15:02:33 +02:00 |
|
Alessandro Ranellucci
|
d03925a18d
|
New GUI with plating facilities
|
2012-04-30 14:56:01 +02:00 |
|
Alessandro Ranellucci
|
96d5e513b8
|
Rename $Slic3r::resolution to $Slic3r::scaling_factor
|
2012-04-16 14:05:38 +02:00 |
|
Alessandro Ranellucci
|
0d910dec84
|
Don't require --duplicate-distance to be positive anymore
|
2012-04-16 11:58:01 +02:00 |
|
Alessandro Ranellucci
|
cb182b8bc2
|
Honeycomb infill. #300
|
2012-04-16 11:55:14 +02:00 |
|
Alessandro Ranellucci
|
1c6469fc25
|
Allow to use x as a separator for --print-center, --bed-size, --duplicate-grid
|
2012-04-11 18:18:01 +02:00 |
|
Alessandro Ranellucci
|
134595fc99
|
Validation for --duplicate-grid and --bed-size
|
2012-04-11 17:52:06 +02:00 |
|
Alessandro Ranellucci
|
e5abb0b9df
|
Enable/disable duplication controls
|
2012-04-11 17:40:10 +02:00 |
|
Alessandro Ranellucci
|
e58ed195fd
|
New --bed-size option
|
2012-04-11 16:30:58 +02:00 |
|