1) Removed virtual methods. There was not really need for them.
2) Some of the virtual methods were using conversion to Lines, which
was unnecessary and expensive.
3) Removed some nearest element search methods from Point.
into a graph with links to the layer above / below.
In addition:
Members of LayerRegion were made private, public interface const only.
this->m_xxx replaced with just m_xxx
SurfacesPtr was made a vector of const pointers.
CONFLICT (content): Merge conflict in resources/profiles/PrusaResearch.idx
CONFLICT (content): Merge conflict in resources/profiles/PrusaResearch.ini
CONFLICT (content): Merge conflict in src/libslic3r/CMakeLists.txt
CONFLICT (content): Merge conflict in src/libslic3r/Fill/Fill.cpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode.cpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode.hpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode/GCodeProcessor.cpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode/GCodeProcessor.hpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode/SeamPlacer.cpp
CONFLICT (content): Merge conflict in src/libslic3r/GCode/SeamPlacer.hpp
CONFLICT (add/add): Merge conflict in src/libslic3r/Geometry/Curves.hpp
CONFLICT (content): Merge conflict in src/libslic3r/PerimeterGenerator.cpp
CONFLICT (content): Merge conflict in src/libslic3r/Point.hpp
CONFLICT (content): Merge conflict in src/libslic3r/PrintConfig.hpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/ConfigWizard.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/GCodeViewer.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/GLCanvas3D.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/GUI_App.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp
CONFLICT (content): Merge conflict in src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp
CONFLICT (content): Merge conflict in src/slic3r/Utils/FixModelByWin10.cpp
CONFLICT (modify/delete): t/perimeters.t deleted in HEAD and modified in master_250. Version master_250 of t/perimeters.t left in tree.
CONFLICT (content): Merge conflict in tests/fff_print/CMakeLists.txt
CONFLICT (content): Merge conflict in tests/fff_print/test_fill.cpp
CONFLICT (content): Merge conflict in version.inc
CONFLICT (modify/delete): xs/xsp/PerimeterGenerator.xsp deleted in HEAD and modified in master_250. Version master_250 of xs/xsp/PerimeterGenerator.xsp left in tree.
provided for Perl bindings and their semantic was confusing.
Implemented free function angle() to measure angle between two vectors.
Reworked Polygon::convex/concave_points(), changed the meaning of their
angle threshold parameter.
Removed some unused methods from Perl bindings and tests.
Reworked the "wipe inside at the external perimeter" function
after Point::ccw_angle() was removed.
circular, convex, concave) and performs efficient collision detection agains these build
volumes. As of now, collision detection is performed against a convex
hull of a concave build volume for efficency.
GCodeProcessor::Result renamed out of GCodeProcessor to GCodeProcessorResult,
so it could be forward declared.
Plater newly exports BuildVolume, not Bed3D. Bed3D is a rendering class,
while BuildVolume is a purely geometric class.
Reduced usage of global wxGetApp, the Bed3D is passed as a parameter
to View3D/Preview/GLCanvas.
Convex hull code was extracted from Geometry.cpp/hpp to Geometry/ConvexHulll.cpp,hpp.
New test inside_convex_polygon().
New efficent point inside polygon test: Decompose convex hull
to bottom / top parts and use the decomposition to detect point inside
a convex polygon in O(log n). decompose_convex_polygon_top_bottom(),
inside_convex_polygon().
New Circle constructing functions: circle_ransac() and circle_taubin_newton().
New polygon_is_convex() test with unit tests.
for offset2() with clear meaning.
New ClipperUtils functions: expand(), shrink() as an alternative
for offset() with clear meaning.
All offset values for the new functions are positive.
Various offsetting ClipperUtils (offset, offset2, offset2_ex) working
over Polygons were marked as unsafe, sometimes producing invalid output
if called for more than one polygon. These functions were reworked
to offset polygons one by one. The new functions working over Polygons
shall work the same way as the old safe ones working over ExPolygons,
but working with Polygons shall be computationally more efficient.
Improvements in FDM support generator:
1) For both grid and snug supports: Don't filter out supports for which
the contacts are completely reduced by support / object XY separation.
2) Rounding / merging of supports using the closing radius parameter is
now smoother, it does not produce sharp corners.
3) Snug supports: When calculating support interfaces, expand the projected
support contact areas to produce wider, printable and more stable interfaces.
4) Don't reduce support interfaces for snug supports for steep overhangs,
that would normally not need them. Snug supports often produce very
narrow support interface regions and turning them off makes the support
interfaces disappear.
TriangleMesh newly only holds indexed_triangle_set and
TriangleMeshStats. TriangleMeshStats contains an excerpt of stl_stats.
TriangleMeshStats are updated when initializing with indexed_triangle_set.
Admesh triangle mesh fixing is newly only used when loading an STL.
AMF / 3MF / OBJ file formats are already indexed triangle sets, thus
they are no more converted to admesh stl_file format, nor fixed
through admesh repair machinery. When importing AMF / 3MF / OBJ files,
volume is calculated and if negative, all faces are flipped. Also
a bounding box and number of open edges is calculated.
Implemented its_number_of_patches(), its_num_open_edges()
Optimized its_split(), its_is_splittable() using a visitor pattern.
Reworked QHull integration into TriangleMesh:
1) Face normals were not right.
2) Indexed triangle set is newly emitted instead of duplicating
vertices for each face.
Fixed cut_mesh(): Orient the triangulated faces correctly.
stl_stats are newly only accessed by TriangleMesh::stats(),
most of the direct access to TriangleMesh::stl is gone with the exception
of parsing input files (3MF, AMF, obj).
WIP to G-code export parallelization through pipelining:
Decoupled CoolingBuffer from GCode / GCodeWriter, ready to be
pipelined on a different thread.
config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
config bundles, project files (3MFs, AMFs). When loading these files,
the caller may decide whether to substitute some of the configuration
values the current PrusaSlicer version does not understand with
some reasonable default value, and whether to report it. If substitution
is disabled, an exception is being thrown as before this commit.
If substitution is enabled, list of substitutions is returned by the
API to be presented to the user. This allows us to introduce for example
new firmware flavor key in PrusaSlicer 2.4 while letting PrusaSlicer
2.3.2 to fall back to some default and to report it to the user.
As a preparation for PrusaSlicer 2.4.0, the new firmware_flavor
"marlinfirmware" (signifying Marlin 2.0 and newer) that is not
supported by 2.3.2 yet will default to "marlin" (signifying legacy
Marlin).
When slicing from command line, substutions are performed by default
and reported into the console, however substitutions may be either
disabled or made silent with the new "config-compatibility" command
line option.
Substitute enums and bools only. Allow booleans to be parsed as
true: "1", "enabled", "on" case insensitive
false: "0", "disabled", "off" case insensitive
This will allow us in the future for example to switch the draft_shield
boolean to an enum with the following values: "disabled" / "enabled" / "limited".
Added "enum_bitmask.hpp" - support for type safe sets of options.
See for example PresetBundle::load_configbundle(...
LoadConfigBundleAttributes flags) for an example of intended usage.
WIP: GUI for reporting the list of config substitutions needs to be
implemented by @YuSanka.
Cherry-pick of 2e55898d78
Fix of an extremely slow bridging calculation, caused by an extremely
slow bridged area detection function, of which the results were never used.
Fixes "slicing fails or takes too long #5974"
1) Using boost::preprocessor to reduce code duplicities when defining
new configuration values.
2) Implemented static hash() and operator== on StaticPrintConfig derived
classes to support hash tables of instances thereof.
