bubnikv
5dc899d64e
Reset wipe moves on tool change and on travel.
2017-03-29 17:45:38 +02:00
bubnikv
cb1a6eae1e
Added dependencies on the Intel Thread Building Blocks.
...
Changed the C++ parallelization code to Intel Thread Building Blocks.
2017-03-07 13:03:14 +01:00
bubnikv
82aed45816
Hopefully fixes the aligned seam:
...
https://github.com/prusa3d/Slic3r/issues/74
The way it works now is following:
Slic3r will add some negative penalty to all perimeter points near the last seam.
Once the perimeter point with minimum penalty is found, its penalty is compared
to a point closest to the last seam. If the penalty of the point
closest to the last seam is nearly as good as the minimum penalty,
the point closest to the last seam is picked instead. This heuristics
will hide the seams into corners if possible, but if not possible, it will
strive to align the seams precisely.
2017-02-22 16:35:07 +01:00
Alessandro Ranellucci
4a84643894
Fixed regression causing slowdown_below_layer_time to be ignored. #3515 #3443
2017-02-22 15:29:14 +01:00
Alessandro Ranellucci
a8edff1e84
Always retract in bottom layers. #3053 #3618
2017-02-21 16:37:31 +01:00
bubnikv
3bfa6416d8
Fixed https://github.com/prusa3d/Slic3r/issues/126
...
by re-shuffling the simplification of a path to be extruded.
A non-simplified path was being used for a wipe move before,
causing an extremely detailed path to be exported into a G-code.
2017-02-15 17:51:46 +01:00
bubnikv
957803e60c
Added min_layer_height, max_layer_height per nozzle settings
...
for controlling the support layer height & variable layer height.
Added an experimental "rear" seam option.
2017-02-07 18:46:02 +01:00
bubnikv
7e6390c4b6
Avoid placement of seams on bridging perimeters, if random seam is enabled.
...
https://github.com/alexrj/Slic3r/issues/3526#issuecomment-263125049
2017-02-02 18:49:33 +01:00
bubnikv
e016c4e423
New extrusion class: ExtrusionMultiPath
...
This is similar to an ExtrusionLoop, but it is open.
It may contain multiple chained paths with differing parameters.
This allows one to have a hierarchy of paths, where the ExtrusionEntityCollection
will be chained by the G-code generator, but ExtrusionMultiPath will not.
2017-01-19 13:35:55 +01:00
bubnikv
6582182e0c
Adapted to the new ClipperUtils.hpp interface by @alexrj
2016-12-13 19:22:23 +01:00
bubnikv
3d3654707b
Added "Notes" page to the filament configuration.
...
Added "filament_max_volumetric_speed", a cap on the maximum volumetric
extrusion role, filament specific. This is very useful when mixing
rigid filament with a soft filament.
Extended the import / export of multi-string values into configuration
values, including the test cases. Multi-line strings will be enclosed
into quotes, quotes escaped using a C-style escape sequences. Single
word strings could still be stored without quotes.
2016-11-01 13:41:24 +01:00
bubnikv
15d3e94a66
Unified the creation of paths of debugging output files
...
pointing to a predefined output directory.
2016-10-21 10:18:01 +02:00
bubnikv
feb269c97c
G code generator will include marks for the G-code analyzer, so
...
the path preview will be colored with a fine granularity.
2016-09-26 12:52:40 +02:00
bubnikv
7d56827e26
updated for older gcc
2016-09-13 15:29:31 +02:00
bubnikv
f518e0675c
Initial commit of the new Pressure Equalizer, the EdgeGrid
...
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
2016-09-12 16:25:15 +02:00
Joseph Lenox
b068616366
Merge pull request #3120 from Vicious-one/patch-1
...
Fix for #3069
2016-05-18 23:01:19 -05:00
Chow Loong Jin
209b919fe6
Fix cooling not working if !gcode_comments
...
The cooling markers were being passed into GCodeWriter::set_speed() as a
comment which were being ignored if gcode_comments was false.
Fixes : #3325
2016-05-12 23:35:39 +08:00
Chow Loong Jin
3d73fbf5fd
Use float for elapsed_time
...
When accumulating elapsed_time from many moves that take less than 1
second, elapsed_time does not get incremented because (unsigned int)0.9
= 0.
2016-04-13 01:13:42 +08:00
Chow Loong Jin
4c622c504f
Account for travel moves in elapsed_time
2016-04-13 01:13:39 +08:00
Chow Loong Jin
2e2e4e68d3
Fix layer time slowdown
...
The recent GCode writer changes which put the speed changes on a line of
their own have caused the layer time slowdown to be ignored by the regex
in CoolingBuffer.pm.
Fixes : #3134
2016-04-10 16:10:18 +08:00
Alessandro Ranellucci
7c8b71012c
Force the 'nearest' strategy for starting skirt loops
2015-12-21 15:02:39 +01:00
Alessandro Ranellucci
1a286fc906
Fixes and improvements to MotionPlanner, much smarter now
2015-12-21 14:46:35 +01:00
Alessandro Ranellucci
bab3404b2d
Very minor code improvements
2015-12-19 16:36:07 +01:00
Alessandro Ranellucci
667a121ddb
Fixed error in porting causing wrong moves with avoid_crossing_perimeters
2015-12-19 14:49:29 +01:00
Alessandro Ranellucci
4913e90e10
Remove any Perl related code from libslic3r
2015-12-08 00:39:54 +01:00
ntfshard
d62f33b0b4
Removed unused variables
2015-11-04 20:49:20 +01:00
ntfshard
dd5c5eb931
Fix: Initializer list, right initialisation order
2015-11-04 20:49:19 +01:00
Vicious-one
8e0d458d1d
Fix for #3069
2015-09-30 16:22:49 +03:00
Luís Andrade
b31edc0be3
Update GCode.cpp
...
Bugfix #3038
2015-08-10 18:03:45 -04:00
Alessandro Ranellucci
3e739b87da
Finished porting Slic3r::GCode to XS (speed boost!)
2015-07-02 20:24:16 +02:00
Alessandro Ranellucci
0ad4296aaf
Ported GCode::set_extruders() and GCode::change_layer() to XS
2015-07-02 19:33:08 +02:00
Alessandro Ranellucci
9a17efc480
Use GCodeWriter for path segments (refactoring)
2015-07-02 19:14:55 +02:00
Alessandro Ranellucci
fbd640fdc5
Ported GCode::extrude_path() to XS (speed boost!)
2015-07-02 18:57:40 +02:00
Alessandro Ranellucci
b025efe729
Ported GCode::travel_to() to XS
2015-07-02 15:12:04 +02:00
Alessandro Ranellucci
a6f4c8e567
Ported GCode::set_extruder() and OozePrevention
2015-07-02 15:02:20 +02:00
Alessandro Ranellucci
ff5747bb60
Macro for readability
2015-07-02 14:31:21 +02:00
Alessandro Ranellucci
b14290b9f6
Make tests happy
2015-07-02 14:29:20 +02:00
Alessandro Ranellucci
5571144c0e
Ported Slic3r::GCode::needs_retraction() to XS
2015-07-01 23:14:40 +02:00
Alessandro Ranellucci
b4019bb438
Ported more Slic3r::GCode methods to XS
2015-07-01 23:00:52 +02:00
Alessandro Ranellucci
801f629fdc
Ported Slic3r::GCode storage to XS
2015-07-01 21:47:17 +02:00
Alessandro Ranellucci
280f3f38d7
Ported Slic3r::GCode::OozePrevention storage to XS
2015-07-01 21:01:42 +02:00
Alessandro Ranellucci
b43dd92766
Ported Slic3r::GCode::Wipe storage to XS
2015-07-01 20:57:16 +02:00
Alessandro Ranellucci
bf9cd1b8e6
Ported Slic3r::GCode::AvoidCrossingPerimeters to XS
2015-07-01 20:14:05 +02:00
