3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,404 Commits 1 Branch 1 Tag 249 MiB
de0c2febd9
Commit Graph

1263 Commits

Author SHA1 Message Date
Alessandro Ranellucci
de0c2febd9 Remove useless lines 2013-02-23 23:50:46 +01:00
Alessandro Ranellucci
08a72c0824 Use bridge math for the first solid infill layer above sparse infill. #240 2013-02-23 21:39:13 +01:00
Alessandro Ranellucci
3b1e921171 Slight changes to the defaults 2013-02-23 19:14:41 +01:00
Alessandro Ranellucci
0634437364 Keep the full geometries in $layer->slices, including thin walls 2013-02-23 18:21:29 +01:00
Alessandro Ranellucci
504962712b Bugfix: when using low layer heights and support material, the contact regions were generated with a negative height. #1013 2013-02-23 17:40:38 +01:00
Alessandro Ranellucci
3eedd4bbed Fixed regression in support material after recent flow refactoring. #1012 2013-02-23 16:08:29 +01:00
Alessandro Ranellucci
72df796185 Bugfix: failure in launching on Windows with non-ASCII characters in username. #1011 2013-02-22 18:40:00 +01:00
Alessandro Ranellucci
28638019ae Bugfix: perimeter/infill overlap was calculated regardless of the infill extrusion width. #994 2013-02-22 18:23:23 +01:00
Alessandro Ranellucci
bec2371604 Fix regression introduced in 91bcfc8a74 2013-02-22 16:56:43 +01:00
Alessandro Ranellucci
5eade0f9e1 Don't validate the number of layers for infill combination, just limit it automatically. #993 2013-02-22 16:24:24 +01:00
Alessandro Ranellucci
91bcfc8a74 Remove $Slic3r::flow and $Slic3r::first_layer_flow 2013-02-22 16:08:11 +01:00
Alessandro Ranellucci
b9c84490b8 Get rid of most calls to $Slic3r::flow 2013-02-19 12:37:26 +01:00
Alessandro Ranellucci
6dc62d3cf2 Disable extra perimeters if fill density is zero as they wouldn't be supported by anything and would just float inside the object. infill_only_where_needed should be the method of choice for hollow objects 2013-02-19 12:37:26 +01:00
Mike Sheldrake
c2f04f2861 avoid overlap of single layer and multilayer fill 
A single-layer rectilinear or honeycomb fill under a low slope
wall/ceiling or extra perimeter will stick out from under the
overhang, because those fills get extended beyond their fill_surface
boundaries to purposely overlap perimeters. This causes interference
with multil-layer fills. This commit clips the single layer fill
boundaries a bit more where they interface with multi-layer fill
boundaries, to avoid overlap.
 2013-02-18 07:26:19 -08:00
Mike Sheldrake
9a86edc70c account for extrusion width when clearing layers for combined infill 
Otherwise you get extraneous fill up against sloped walls in regions
of layers that should not have fill, like in #834.
 2013-02-16 07:53:47 -08:00
Alessandro Ranellucci
c9b506fa02 New simpler and more robust implementation of infill every 'n' layers 2013-02-10 12:40:43 +01:00
Alessandro Ranellucci
cac79c0575 New option to only infill where strictly needed for supporting ceilings 2013-02-09 23:36:32 +01:00
Alessandro Ranellucci
cf8cfc1380 Bugfix: angle threshold was considered even when enforcing support 2013-02-09 21:49:00 +01:00
Alessandro Ranellucci
26a3cd5542 Refactor chained_path(), add chained_path_items() and chained_path_points() 2013-02-06 12:03:53 +01:00
Alessandro Ranellucci
e593a30fc7 Skip support material for one-layer objects 2013-02-06 10:40:08 +01:00
Alessandro Ranellucci
4f91bed904 Optimize cycling in get_layer_range() 2013-02-05 21:59:18 +01:00
Alessandro Ranellucci
73a661e6c1 shortest_path() in MotionPlanner was actually correctly named shortest_path() 2013-02-05 19:41:56 +01:00
Alessandro Ranellucci
090e3b1fe3 Rename shortest_path to chained_path, which reflects its algorithm more correctly 2013-02-05 17:27:45 +01:00
Alessandro Ranellucci
11637d527a Bugfix: avoid-crossing-perimeters was failing on layers only containing single walls. #978 2013-02-04 19:33:30 +01:00
Alessandro Ranellucci
8efe46e58d New option to enforce support material on a given number of layers to improve adhesion of objects with poor footprint 2013-02-04 15:48:57 +01:00
Alessandro Ranellucci
c8100ed099 Disable randomize starting points by default 2013-02-04 15:05:56 +01:00
Alessandro Ranellucci
7d08796b0a Remove sporadic duplicate useless lines. #772 2013-02-04 14:27:23 +01:00
Alessandro Ranellucci
9222526e03 Customizable number of interface layers for support material and raft 2013-02-03 17:23:50 +01:00
Alessandro Ranellucci
acada05068 Merge branch 'raft' 2013-02-02 16:17:05 +01:00
Alessandro Ranellucci
c7b4d99d7e Generate raft automatically even when support material is disabled 2013-02-02 16:16:43 +01:00
Alessandro Ranellucci
02c0f3658f Use 50% density for support base flange 2013-02-02 15:37:09 +01:00
Alessandro Ranellucci
d3727a1699 Add ability to have cross-hatched rectilinear support material. #509 2013-02-02 00:14:45 +01:00
Alessandro Ranellucci
547dfb857d Workaround for Boost clipping not being idempotent and causing lack of support material 2013-02-01 23:45:46 +01:00
Alessandro Ranellucci
eae1e7adc2 Make a solid base below support material on first layer 2013-02-01 22:13:12 +01:00
Alessandro Ranellucci
1de0169910 Multithreaded perimeter generation. #154 2013-01-31 15:44:55 +01:00
Alessandro Ranellucci
177f1a9bf0 New raft_layers option. #123 2013-01-28 14:12:01 +01:00
Alessandro Ranellucci
a016a06fa6 Merge branch 'avoid-crossing-perimeters' 
Conflicts:
	lib/Slic3r/GCode.pm
 2013-01-28 10:43:58 +01:00
Alessandro Ranellucci
e8cb1f4528 Slight addition to avoid_crossing_perimeters tooltip 2013-01-28 10:42:24 +01:00
Alessandro Ranellucci
721b61e798 Require Boost::Geometry::Utils 0.06 2013-01-28 00:34:09 +01:00
Alessandro Ranellucci
2963e54d21 Use the faster polygon_multi_linestring_intersection() 2013-01-28 00:32:19 +01:00
Alessandro Ranellucci
ae201c8f41 Optimization: avoid calculating square roots if not needed 2013-01-28 00:18:55 +01:00
Alessandro Ranellucci
6cb891f2db Use Boost::Geometry::Utils for Douglas-Peucker 2013-01-28 00:09:19 +01:00
Alessandro Ranellucci
4c8c725eec Add a wkt() method to ExPolygon 2013-01-28 00:02:34 +01:00
Alessandro Ranellucci
ddaeaa7591 Fix last_pos shifting and add unit test 2013-01-27 13:08:13 +01:00
Alessandro Ranellucci
50526dea5a Fix last_pos shifting and add unit test 2013-01-27 13:06:45 +01:00
Alessandro Ranellucci
ad48fdc7f9 Fix external motionplanner too 2013-01-27 12:48:16 +01:00
Alessandro Ranellucci
f1230312e3 Fixes for merge issues 2013-01-26 23:55:47 +01:00
Alessandro Ranellucci
61b164b539 Merge branch 'master' into avoid-crossing-perimeters 
Conflicts:
	lib/Slic3r/GCode.pm
	lib/Slic3r/Print.pm
 2013-01-26 21:45:17 +01:00
Alessandro Ranellucci
4c62c1b570 Support .gco extension too. #957 2013-01-26 21:40:20 +01:00
Mike Sheldrake
bc61656057 harmless misplaced semicolon 2013-01-26 09:31:28 -08:00