1. "Revert" buttons on the bar don't work for a "Compatible printers" and a "Compatible prints profiles".
And cause a crash if they are pressed in Print(SLA) Settings.
2. A label of a "Compatible printers" option is always black in Filament(Materials) Settings Tab
and the "show incompatible profiles" option.
It was not able to select the incompatible Print profile, which is
possible now.
(see Cannot select incompatible printer profile #3715)
When the Printer profile derived from the Prusa3D system profile was
active or a system Prusa3D profile was active, and when the Print profile
with the removed "inherits" field was active (or any other profile
derived from the "-- default --" profile was active), then the filament
selector offered just the profiles with the removed "inherits" field
(or any other profile derived from the "-- default--") profile.
This behavior has been now changed, so that in this scenario the Filament selector
will offer the Prusa3D vendor profiles compatible with the active Print
and Printer profile as well as the user profiles.
Slicer was also changed to keep an incompatible preset selected
at its respective tab if its respective "Red flag" is enabled.
For example, if an incompatible Print preset is selected and a Printer
profile is switched to another one which is not compatible with the active
Print preset that was red already, the active Print preset is
not switched if the Print "Red flag" is active. However, if the Print profile
was compatible before the Printer profile is switched and now the Print
profile becomes incompatible, another compatible Print profile is selected.
A likely bug in wxWidgets was worked around when switching a Print preset
on Plater, if the last item in the Print preset was active and incompatible,
and another Print preset was selected by the user. On Windows, an CBN_EDITCHANGE
is sent just after combo box selection change event and the CBN_EDITCHANGE
holds an index of the combo box item, which will be removed by the 1st event,
therefore leading to an assert in wxWidgets on CBN_EDITCHANGE. The workaround
is to disable processing of CBN_EDITCHANGE on Windows for the Plater
preset selection combo boxes.
+ msw_rescale() is overridden for PrinterTab to rescale of all the option Pages and not just a respect to current print technology
+ A Setting of the option.width in PrintConfig is no need anymore
The two new config keys define a minimum vertical shell thickness.
The top shell thickness is calculated as a maximum of sum over
top_solid_layers * layer heights and top_solid_min_thickness,
the bottom shell thickness is calculated as a maximum of sum over
bottom_solid_layers * layer heights and bottom_solid_min_thickness.
The results of the formula above are shown at the Print parameter page
below the two new values to hint the user about the interaction
of the old versus new config values.
top_solid_min_thickness has no meaning if top_solid_layers is zero,
bottom_solid_min_thickness has no meaning if bottom_solid_layers is zero.
which now will be used for preset choosers on sidebar a preset tabs.
+ for BitmapCache class added m_scale used for correct scaling of SVG images on Retina displays
+ some code clearing from unused functions or function's parameters
Fixed an issue, where deleting a profile did not correctly update
profile dependences, and deleting a profile would not test dirty status
of depending profiles, which would be switched thus user changes would be lost.
Fixed enabling / disabling the --default FFF-- / --default SLA-- profiles
when deleting the last printer profile.
Little refactoring (don't compare by strings but by symbolic names).
Making a copy of a profile - "Copy" suffix is added to a system profile.
Reworked command line processing for the GUI slic3r. Now the config is loaded first, then the model files (also the configs from AMF/3MF are applied), and lastly the free standing parameters are applied.
Fixed unescaping for command line parameters. The string parameters are now not unescaped, string vector parameters are unescaped only if enquoted.
Tab::load_current_preset() - disabled CallAfter for predictability. With CallAfter, it was difficult to call the method in sequence with other methods.
Fixed some missing ->Destroy() calls on dialogs created from MainFrame
Fixed some compiler warnings.
improved utf8 compatibility of Tab::may_discard_current_dirty_preset(),
renamed "SLA Print Profile" / "SLA Material Profile" to just "Print Profile"
resp. Material Profile.
