3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
13,036 Commits 1 Branch 1 Tag 249 MiB
f64da8e6cc
Commit Graph

26 Commits

Author SHA1 Message Date
bubnikv
f64da8e6cc Update of back-end warnings: 
Back-end warnings contain two new members: "current" and "message_id".
A warning is set to "not current" if its milestone is invalidated.
 2020-07-15 18:03:39 +02:00
Vojtech Bubnik
746ece4c40 Support for collecting warnings from the background processing. 
Multiple warnigns may be collected per Print / PrintObject milestone
and a status update is sent to the UI immediately after a warning
is issued.
 2020-07-14 11:52:34 +02:00
Lukas Matena
dbc51a140d Fixed erroneous use of logical OR where bitwise OR was meant 
Also, PrintBase::SlicingStatus enum had two entries assigned to 0 - removed the one that was never used
 2019-09-25 12:18:30 +02:00
bubnikv
86287a28ec Fixed the Perl bindings, made Print::m_placeholder_parser protected, 
removed the non-const accessor method to m_placeholder_parser.
 2019-07-25 17:08:31 +02:00
bubnikv
f8218eb903 Reworked the FFF Print::update() to process the filament retract 
override values and to store them into the output G-code.
 2019-07-25 14:39:19 +02:00
bubnikv
27ee68d2f9 WIP Undo / Redo: ModelID / ModelBase renamed to ObjectID / ObjectBase 2019-06-27 11:02:45 +02:00
Lukas Matena
07282eb24d Fixed unit tests when run with range checks on std::vector 
There was a bug in unit tests that led to generating the wipe tower with non-normalized preset.
This caused out-of-bounds access into max_layer_height vector in fill_wipe_tower_partitions.
The problem surfaced in https://github.com/prusa3d/PrusaSlicer/issues/2288.
I quickly patched additional normalization of the preset to prevent this from happening.

Also, an assert in the same function turned out to trip on one of the tests.
This one was commented out for now and will (hopefully) be looked into later.

Function Print::apply_config was renamed to apply_config_perl_tests_only so everyone
sees its current purpose and does not mistake it for the more important Print::apply.
 2019-05-22 16:48:20 +02:00
bubnikv
04397c7948 Changed the G-code export and send to OctoPrint GUI code 
to store the G-code next to the project file if it exists,
and to process the project name with the PlaceholderParser.
 2019-05-17 16:27:00 +02:00
bubnikv
d6b409d0d9 Update the SLA slices at the print preview once the index is calculated. 2019-03-14 15:11:27 +01:00
bubnikv
76f1aa09d0 Fixed an issue with background processing cancelation & SLA supports 
for a single object only.
Fixed a spelling issue in "call_cancell_xxx"
 2019-02-21 12:39:38 +01:00
bubnikv
159041747d WIP: SLA support "Generate points" and "Apply Changes" will reslice 
just the selected object.
Added "Host upload active" check on background processing state.
Documented requirements on "update_background_process" to
control the upcoming single "Slice Now" / "Export" button.
 2019-02-21 11:40:56 +01:00
bubnikv
c86a4f3ac6 Fix of "Change of object type support blocker to enforcer does nothing (and vice versa) (#1818)" 
WIP: Limited background processing for SLA supports.
 2019-02-21 08:44:07 +01:00
bubnikv
fb6f3d8431 Send EVT_SLICING_UPDATE with RELOAD_SLA_SUPPORT_POINTS 
once object's support points are calculated by the backend.
 2019-02-06 14:18:04 +01:00
bubnikv
a56f7d60e5 Fixed an issue, where the output G-code file name was not always updated 
from the current Model/ModelObjects.
Fixed a possible race condition in updating Print::m_placeholder_parser
with the proposed filename / filename base.
Improved documentation (source code comments).
 2019-02-03 10:41:14 +01:00
bubnikv
c0ebcacf1d WIP: Time estimate in file names. 2018-12-12 12:00:45 +01:00
bubnikv
09c539a242 Trigger background processing update when switching to a preview tab. 
Implements "Go Direct to the preview screen after slicing #152"
 2018-12-11 17:49:31 +01:00
bubnikv
d46d0dc365 Implemented naming of the SLA export file based on the output file name 
template.

Reworked naming of the plater exports to not use the output file name
template, but to derive the file name from the first printable object's name.

Fixed error handling: Reimpemented the Perl's "eval" blocks
as try / catch blocks.
 2018-12-03 13:14:28 +01:00
tamasmeszaros
1a58513717 Using the new status update interface to refresh scene right after the supports are ready. 2018-11-21 12:10:10 +01:00
bubnikv
22a7afabba Renamed PrintBase::Status to SlicingStatusEvent 
Hopefully it will fix compilation on Linux (some forgotten Status macro?)
 2018-11-20 16:27:30 +01:00
bubnikv
8ecb2163b6 Hopefully a fix of OSX compilation issue. 2018-11-20 15:18:46 +01:00
bubnikv
bed3eed3d2 The slicing progress message can now trigger refresh of the 3D scene. 2018-11-20 13:22:26 +01:00
bubnikv
c9a4c6c73c Partial update of 3D scene (GLVolumes derived from Model and from 
the SLAPrintObject).
Updated PrintBase to generate a unique timestamp at each step invalidation.
 2018-11-16 18:28:50 +01:00
bubnikv
870c435e1b WIP: SLAPrintObjectConfig, SLAPrint / SLAPrintObject initialization. 2018-11-09 12:02:42 +01:00
bubnikv
bbfbe88a5f Integrated SLAPrint into background processing. 
Fixed couple of compiler warnings.
 2018-11-08 20:18:40 +01:00
bubnikv
34e525766b Fix of friend declaration on a template parameter, according to C++11 2018-11-08 14:57:42 +01:00
bubnikv
c2e46350f2 Separated Print / PrintObject into PrintBase.cpp/h to support SLAPrint 2018-11-08 14:23:17 +01:00