Will Miles
|
fbce8e6730
|
Avoid integer overflow in arc test. Fixes #1918
|
2014-04-22 23:01:01 -04:00 |
|
Alessandro Ranellucci
|
9989ebaabd
|
Refactored the BridgeDetector class to expose a cleaner API and make it stateful
|
2014-04-22 00:59:14 +02:00 |
|
Alessandro Ranellucci
|
f7e8a99078
|
More tests and related fixes to bridge detection. #1917
|
2014-04-21 20:44:21 +02:00 |
|
Alessandro Ranellucci
|
c4bfe64fb8
|
Test coverage for retract_layer_change
|
2014-04-19 19:28:43 +02:00 |
|
Alessandro Ranellucci
|
a248c98192
|
Fixed regression when concentric infill was used as solid infill. Includes regression test. #1650
|
2014-04-19 16:53:37 +02:00 |
|
Alessandro Ranellucci
|
f51921a11a
|
Default extruder wasn't applied to perimeter extruder. Includes regression test. #1868
|
2014-04-19 11:43:41 +02:00 |
|
Alessandro Ranellucci
|
62e19469bc
|
Fixed regression in --infill-only-where-needed. Includes a minimal test suite for such feature. #1871
Conflicts:
t/fill.t
|
2014-04-18 21:48:32 +02:00 |
|
Alessandro Ranellucci
|
15628a90ed
|
Regression test for numerical issues causing thin gaps between perimeters and infill. #1803
|
2014-04-18 17:30:35 +02:00 |
|
Alessandro Ranellucci
|
e02d33bbce
|
Remove weak test. #1803
|
2014-04-15 00:57:43 +02:00 |
|
Alessandro Ranellucci
|
43ffb7d3e8
|
Bugfix: sometimes a tiny gap was left between infill and perimeters. Includes regression test. #1803
|
2014-04-15 00:22:31 +02:00 |
|
Alessandro Ranellucci
|
26bdbf0210
|
Test bridges when infill flow is larger than perimeter flow. #1917
|
2014-04-09 12:09:25 +02:00 |
|
Alessandro Ranellucci
|
627f23d5fe
|
Make angle increment (i.e. angle resolution) configurable
|
2014-04-08 16:53:32 +02:00 |
|
Alessandro Ranellucci
|
20ca6cea05
|
Test Clipper's buggy behavior with polylines having coinciding endpoints
|
2014-04-08 15:26:31 +02:00 |
|
Alessandro Ranellucci
|
38f6e3b643
|
More unit tests for bridge angle detection
|
2014-04-08 15:18:37 +02:00 |
|
Alessandro Ranellucci
|
9be57f750d
|
Some fixes to bridge direction detection. Includes regression tests
|
2014-04-08 14:51:55 +02:00 |
|
Alessandro Ranellucci
|
23e6abff49
|
Added first unit test for bridge direction
|
2014-04-08 13:08:42 +02:00 |
|
Alessandro Ranellucci
|
e4709068b9
|
Some more unit tests for arc fitting
|
2014-04-06 22:32:53 +02:00 |
|
Alessandro Ranellucci
|
1d35701f99
|
Incomplete work on arc fitting. Results are still incomplete. More unit tests are needed
|
2014-04-06 22:10:34 +02:00 |
|
Alessandro Ranellucci
|
e9e23119fc
|
Failing test for broken command line scaling. #1889
|
2014-04-05 11:21:26 +02:00 |
|
Alessandro Ranellucci
|
d6d6a51e0d
|
Fix for incomplete extrusion on solid surfaces
|
2014-04-05 10:54:24 +02:00 |
|
Alessandro Ranellucci
|
d2a6194960
|
Fix the 'extruder' behavior in CLI and test that Print::Simple accepts an incomplete DynamicConfig object
|
2014-04-05 10:18:00 +02:00 |
|
Alessandro Ranellucci
|
6f3844c1ba
|
Fix crash when using multiple skirts with a single, non-zero, extruder. Includes regression test
|
2014-04-05 10:09:05 +02:00 |
|
Alessandro Ranellucci
|
9c7cc484bc
|
Update t/support.t still assuming default support material pattern was honeycomb
|
2014-03-27 00:28:26 +01:00 |
|
Alessandro Ranellucci
|
071097d3f1
|
Fix extruder assignment and tests
|
2014-03-27 00:01:33 +01:00 |
|
Alessandro Ranellucci
|
10bf334a58
|
Added one more failing test to address bad option priority hierarchy
|
2014-03-26 19:42:01 +01:00 |
|
Alessandro Ranellucci
|
a058994b20
|
Disable thin wall test failing on Linux. A more robust implementation is needed. #1825
|
2014-03-25 14:23:11 +01:00 |
|
Alessandro Ranellucci
|
432a87e73d
|
New option for forcing the generation of interface shells. #1847
|
2014-03-25 01:11:28 +01:00 |
|
Alessandro Ranellucci
|
6feff7fe53
|
Test that stacked cubes with distinct extruders don't generate any internal interface shells. #1847
|
2014-03-24 23:44:47 +01:00 |
|
Alessandro Ranellucci
|
5ce4de0544
|
Bugfix: wrong inwards moves were calculated for 2+ copies because ExtrusionLoop objects were modified in place. Includes regression test. #1842
|
2014-03-24 20:01:14 +01:00 |
|
Alessandro Ranellucci
|
7421a7bf63
|
Turn fill_density into percentage
|
2014-03-22 16:23:33 +01:00 |
|
Alessandro Ranellucci
|
34f1511e0c
|
Better fix for non-global options not being replaced in filename placeholders. Includes refactoring and a new PlaceholderParser class. Also includes regression tests. #1831
|
2014-03-17 00:39:07 +01:00 |
|
Alessandro Ranellucci
|
bc054e613c
|
Fix regression causing non-global config options to be ignored when replacing placeholders in output filename format. #1831
|
2014-03-15 20:45:10 +01:00 |
|
Alessandro Ranellucci
|
2a73ab988f
|
Recursive pruning. Some more unit tests
|
2014-03-09 17:46:02 +01:00 |
|
Alessandro Ranellucci
|
33da6adc3c
|
Better pruning
|
2014-03-08 11:36:48 +01:00 |
|
Alessandro Ranellucci
|
3c77b301a7
|
Promising approach to medial axis pruning
|
2014-03-04 23:33:13 +01:00 |
|
Alessandro Ranellucci
|
ba5435cde1
|
More medial axis tests
|
2014-03-03 02:14:02 +01:00 |
|
Alessandro Ranellucci
|
b49a652736
|
Rewritten half-edge traversal in a more robust way. Includes first medial axis unit test
|
2014-03-03 01:48:05 +01:00 |
|
Alessandro Ranellucci
|
bc44611f24
|
Fix failing test after recent changes to thin wall thresholds
|
2014-03-02 22:26:52 +01:00 |
|
Alessandro Ranellucci
|
2295d48947
|
Better pruning of thin walls to avoid unwanted extra extrusions. Includes regression test. #1794
Conflicts:
lib/Slic3r/Layer/Region.pm
|
2014-03-02 00:31:17 +01:00 |
|
Alessandro Ranellucci
|
a344d68257
|
Use bridge speed for first solid layer above sparse infill. Includes unit test. #1792
|
2014-03-01 20:35:44 +01:00 |
|
Alessandro Ranellucci
|
344a517ce8
|
Regression test for #1808 (crash when using non-consecutive extruders), already fixed in master branch
|
2014-02-26 11:56:34 +01:00 |
|
Alessandro Ranellucci
|
e837183327
|
Fixed regression when using --infill-only-where-needed. Includes regression test. #1721
|
2014-02-16 12:48:07 +01:00 |
|
Alessandro Ranellucci
|
4c650a6d80
|
Fix regression about percent extrusion width not being validated. Includes regression test
|
2014-02-13 18:42:49 +01:00 |
|
Alessandro Ranellucci
|
8331c54b67
|
Updated test count in t/shells.t
|
2014-02-13 16:17:32 +01:00 |
|
Alessandro Ranellucci
|
49d290accf
|
Fixed spiral vase regressions. Includes regression tests. #1773
|
2014-02-13 16:11:12 +01:00 |
|
Alessandro Ranellucci
|
0060873f1c
|
Regression test and incomplete fix for bug affecting wrong spiral vase output. #1773
Conflicts:
lib/Slic3r/GCode/Layer.pm
|
2014-02-13 16:11:02 +01:00 |
|
Alessandro Ranellucci
|
634ccb33ab
|
Fix regression in Config->setenv affecting post-processing scripts. Includes regression test
|
2014-02-09 23:14:32 +01:00 |
|
Alessandro Ranellucci
|
ffc891d885
|
Bugfix: when processing with fill_density = 0, top/bottom solid shells were missing regions thinner than 3 * extrusion width. Includes regression test. #1602
Conflicts:
lib/Slic3r/Print/Object.pm
t/fill.t
|
2014-02-07 02:07:21 +01:00 |
|
Alessandro Ranellucci
|
66045faf81
|
Fix error in t/support.t
|
2014-01-14 13:41:39 +01:00 |
|
Alessandro Ranellucci
|
89d3dbaa5a
|
Bugfix: incorrect number of raft layers was generated when too few were requested. #1678
Conflicts:
lib/Slic3r/Print/Object.pm
|
2014-01-11 23:26:48 +01:00 |
|
Alessandro Ranellucci
|
c99b9d91db
|
Fix bug in regression infill causing bad clipping at very low layer heights. Includes regression test. #1669
Conflicts:
lib/Slic3r/Fill/Rectilinear.pm
|
2014-01-11 21:34:26 +01:00 |
|
Alessandro Ranellucci
|
ea173cf815
|
Bugfix: ambiguous semantics of the layers_count() method caused M73 to go beyond 100%. #1670
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
|
2014-01-11 17:40:09 +01:00 |
|
Alessandro Ranellucci
|
ed3a6349c7
|
Adapt the new gcode.t test to master (and subtract final retraction from used filament length)
|
2014-01-11 14:42:31 +01:00 |
|
Alessandro Ranellucci
|
529d1b19c3
|
Test that absolute_E is positive at the end of print (and document that it accounts for the final retraction)
|
2014-01-11 14:26:19 +01:00 |
|
Alessandro Ranellucci
|
b17d06f9d1
|
Finished porting BoundingBox to XS
|
2014-01-07 12:48:09 +01:00 |
|
Alessandro Ranellucci
|
07b9b12475
|
Make tests pass
|
2014-01-05 00:36:33 +01:00 |
|
Alessandro Ranellucci
|
a2cbb261cb
|
More work for refactoring Flow/Extruder
|
2014-01-03 20:02:00 +01:00 |
|
Alessandro Ranellucci
|
8ed738d3f7
|
More incomplete work for Flow/Extruder refactoring
|
2014-01-03 18:27:46 +01:00 |
|
Alessandro Ranellucci
|
5bf0942f45
|
Satisfy test suite and CLI
|
2014-01-02 17:24:23 +01:00 |
|
Alessandro Ranellucci
|
bd133d9434
|
Update Clipper to 6.1.2
|
2013-12-24 12:40:46 +01:00 |
|
Alessandro Ranellucci
|
1a690589a8
|
Satisfy test suite
|
2013-12-24 12:03:30 +01:00 |
|
Alessandro Ranellucci
|
2956c1a2e5
|
More work for removing references to $Slic3r::Config
|
2013-12-24 11:58:36 +01:00 |
|
Alessandro Ranellucci
|
7ddf4f3ddf
|
Fixes to complete_objects to make t/gcode.t pass
|
2013-12-24 01:13:02 +01:00 |
|
Alessandro Ranellucci
|
20f1f3d2b4
|
Fix regression preventing raft from being generated for the entire object footprint. #1614 #1567
|
2013-12-23 20:31:50 +01:00 |
|
Alessandro Ranellucci
|
fc5aac0ff6
|
Bugfix: fan wasn't turned on for bridges when vibration limit or another internal post-processor was enabled. Includes regression test. #1533
|
2013-12-23 01:19:53 +01:00 |
|
Alessandro Ranellucci
|
38ea5f79d7
|
Merge branch 'xs-model'
|
2013-12-18 19:20:23 +01:00 |
|
Alessandro Ranellucci
|
916a0a0e58
|
Fix compilation and test suite
|
2013-12-18 16:34:31 +01:00 |
|
Alessandro Ranellucci
|
12db58c9d0
|
Merge branch 'stable'
|
2013-12-07 14:54:07 +01:00 |
|
Alessandro Ranellucci
|
00e8ba4781
|
Fix regression causing complete_objects to skip Z moves after first object is complete. Includes regression test. #1582 #1541
|
2013-12-07 14:52:59 +01:00 |
|
Alessandro Ranellucci
|
bd8c430afd
|
Merge branch 'stable'
Conflicts:
lib/Slic3r/Geometry/Clipper.pm
lib/Slic3r/Layer/Region.pm
|
2013-11-24 22:48:31 +01:00 |
|
Alessandro Ranellucci
|
387df3b900
|
Fix regression causing toolchange_gcode to crash Slic3r. Includes regression test. #1545
|
2013-11-24 13:04:16 +01:00 |
|
Alessandro Ranellucci
|
5217bc370a
|
Fix regression causing retraction restarts to ignore extrusion_axis. Includes regression test. #1547
|
2013-11-24 12:37:36 +01:00 |
|
Alessandro Ranellucci
|
a29eeb7789
|
Fix t/geometry.t
|
2013-11-24 00:59:45 +01:00 |
|
Alessandro Ranellucci
|
0045f84ed2
|
Removed chained_path_points()
|
2013-11-23 21:42:01 +01:00 |
|
Alessandro Ranellucci
|
4577f0725c
|
Incomplete work for XS-based convex_hull
|
2013-11-22 21:43:35 +01:00 |
|
Alessandro Ranellucci
|
a950fbe0c2
|
Removed more unused functions and fixed tests
|
2013-11-22 16:19:15 +01:00 |
|
Alessandro Ranellucci
|
518798beb3
|
Incomplete work for porting simplify() to XS
|
2013-11-21 20:25:24 +01:00 |
|
Alessandro Ranellucci
|
5f2b2c90b6
|
Fix error in contains_point() port
|
2013-11-21 18:42:16 +01:00 |
|
Alessandro Ranellucci
|
5f81292f3f
|
Ported encloses_point() to XS and renamed to contains_point()
|
2013-11-21 16:21:42 +01:00 |
|
Alessandro Ranellucci
|
3025c77675
|
Use Clipper for line clipping
|
2013-11-21 14:15:38 +01:00 |
|
Alessandro Ranellucci
|
50c0081d25
|
Update Clipper to 6.0.0
|
2013-11-20 11:35:58 +01:00 |
|
Alessandro Ranellucci
|
beb7939e22
|
Rename standby_temperature to ooze_prevention. #1523
|
2013-11-15 16:01:15 +01:00 |
|
Alessandro Ranellucci
|
5e78f8a0b0
|
Make sure all extruders are outside skirt at toolchange when standby_temperature is enabled
|
2013-11-15 15:52:11 +01:00 |
|
Alessandro
|
e024b08762
|
Round Perl coordinates instead of truncating them to integers. #1486 #1445 #1464
|
2013-11-11 13:00:50 +01:00 |
|
Alessandro Ranellucci
|
849d69d178
|
Fix regression in chained_path() introduced in fb763b0187. Includes regression test. #1184
|
2013-11-02 18:00:55 +01:00 |
|
Alessandro Ranellucci
|
0b63afb370
|
Fix complete_objects after XS port. Includes regression test. #1511
|
2013-11-02 14:44:30 +01:00 |
|
Alessandro Ranellucci
|
c08d4cc798
|
Fixed support unit tests and reduced dependency on $object
|
2013-10-26 17:56:59 +02:00 |
|
Alessandro Ranellucci
|
4c2c31b554
|
Fix speed math for wipe, which was causing too fast retraction. Includes regression test. #1468
|
2013-10-13 17:05:22 +02:00 |
|
Alessandro Ranellucci
|
ed529b62f3
|
Fix threading issue with GUI. #1443 #1444
|
2013-09-19 16:00:47 +02:00 |
|
Alessandro Ranellucci
|
032698fb07
|
Test that toolchanges happen outside skirt when standby-temperature is enabled
|
2013-09-19 10:44:29 +02:00 |
|
Alessandro Ranellucci
|
40fd7418cd
|
Added test for standby_temperature
|
2013-09-19 01:29:34 +02:00 |
|
Alessandro Ranellucci
|
a7989e382c
|
Bugfix: enabling raft layers generated support for the whole model. Includes regression test. #1375
|
2013-09-17 23:51:30 +02:00 |
|
Alessandro Ranellucci
|
d69c956e75
|
Update t/support.t
|
2013-09-17 23:32:01 +02:00 |
|
Alessandro Ranellucci
|
ea0e136b45
|
Prevent superfluous extra perimeters added when a region has an acute angle
|
2013-09-17 20:18:54 +02:00 |
|
Alessandro Ranellucci
|
39449f9245
|
Revert a recent change made to shells generation, causing too much solid infill. Includes regression test. #1431
|
2013-09-17 19:24:16 +02:00 |
|
Alessandro Ranellucci
|
7bd2ce21ca
|
Fix wrong bridge flow used for overhangs and bridge perimeters. Includes regression test. #1407
|
2013-09-17 10:37:01 +02:00 |
|
Alessandro Ranellucci
|
aef5c05c57
|
Update brim generation code. Includes regression test. #1440
|
2013-09-16 10:33:30 +02:00 |
|
Alessandro Ranellucci
|
5f54d0eb90
|
Fix concentric infill and add regression test. #1432
|
2013-09-12 11:14:54 +02:00 |
|
Alessandro Ranellucci
|
747fd25f6d
|
Fix threads, tests and require the most recent Moo version
|
2013-09-12 11:09:03 +02:00 |
|
Alessandro Ranellucci
|
a821eb7f3c
|
More work to avoid working with vertices outside XS
|
2013-09-11 11:55:08 +02:00 |
|