Joseph Lenox
abda054720
Cherry-picked Repetier acceleration fixes, thanks to @lordofhyphens
...
e0d8101627885f27b8ae
2017-02-10 09:39:19 +01:00
bubnikv
4ab972b87a
When the support extruders are set to 0, support is printed with the current material without a tool change.
...
A fix of support path generator.
2017-01-30 19:56:46 +01:00
bubnikv
1ba03af2da
Made the config value support_material_xy_spacing relative
...
to the external perimeter width.
2017-01-05 09:12:24 +01:00
slicer-builder
bb22f1dc8a
prototyping tweakable XY supports;
...
option should be present now in advanced support menu.
Can't figure out what's going on atm; support should be moving but isn't
2017-01-03 11:46:52 +01:00
bubnikv
1fb57e439e
Defined the +-* operators on Pointf.
...
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
2016-10-21 16:53:42 +02:00
bubnikv
47cc9687a0
Added a new switch: ensure_vertical_shell_thickness
...
This enables a zig-zag infill similar to Cura or Simplify3D
on overhangs.
2016-10-16 22:11:19 +02:00
bubnikv
5268574ade
Made the sheath around the base support configurable. Without the sheath
...
it is easier to remove the support, but the support is more fragile.
2016-10-04 14:38:13 +02:00
bubnikv
5bb37ad2c4
A new feature "support_material_buildplate_only" implemented.
...
Also a bug has been fixed for zero interface layers. Before
slic3r would put infinite number of interface layers over top surfaces,
if the number of interface layers was set to zero.
2016-10-04 13:54:10 +02:00
bubnikv
ca98e2655a
New command line option: --dont-arrange
...
Don't arrange the objects on the build plate. The model coordinates
define the absolute positions on the build plate.
The option --print-center will be ignored.
Also there is a fix in the command line invocation of --duplicate-grid
so it will run, but still there is something broken there and the results
are not correct.
2016-09-05 11:32:58 +02:00
bubnikv
d8be976356
The "controller" tab and the settings of the USB/serial connection was
...
made configurable. Now one may hide the "controller" tab and the USB/serial
connection configuration from the preferences. This is useful for someone,
who never connects his printer to the computer by a cable.
2016-05-16 23:57:53 +02:00
Alessandro Ranellucci
f006e66549
Refactored calls to Wx::Bitmap->new
2016-04-09 19:10:57 +02:00
Alessandro Ranellucci
8138fbf349
New --retract-lift-above and --retract-lift-below options. #763 #3057
2015-12-18 18:36:39 +01:00
Alessandro Ranellucci
1dc5f5531e
If --save is called without any other config option, export full default settings. #2110
2015-06-02 22:05:53 +02:00
Alessandro Ranellucci
57e6a7becd
Fix --help output: --retract-layer-change is disabled by default. #2846
2015-05-25 00:35:57 +02:00
Alessandro Ranellucci
6185f45815
Hopefully fix all problems with non-ASCII paths on Windows
2015-03-09 15:17:50 +01:00
Alessandro Ranellucci
66824fd17e
Set STDOUT to UTF-8
2015-03-08 00:54:38 +01:00
Alessandro Ranellucci
1180a6d83f
Merge pull request #2508 from strahlex/machinekit-gcode
...
added support Machinekit flavour GCode
2015-02-15 17:00:08 +01:00
Alessandro Ranellucci
43f4806142
Load files into the GUI when supplying them as command line arguments along with the --gui switch. #2644
2015-02-14 12:54:06 +01:00
Alexander Rössler
d35226b889
added support Machinekit flavour GCode
2015-02-06 18:48:46 +01:00
Alessandro Ranellucci
07cd25d0ec
New option for customization of infill/perimeters overlap. #2459
2015-02-01 12:08:25 +01:00
Alessandro Ranellucci
059b00a829
New --before-layer-change option and new layer_z placeholder. #2602
2015-01-30 20:08:00 +01:00
Alessandro Ranellucci
7b980c1dc9
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
2015-01-19 09:52:24 +01:00
Alessandro Ranellucci
306bc02e29
Fix --help, wrong default were displayed for a couple options. #2541
2015-01-15 17:49:22 +01:00
adius
4b38cffc60
Fix typo in documentation
2015-01-13 00:19:01 +01:00
Alessandro Ranellucci
47e4e8bb66
Option to use volumetric E values. #1746
2015-01-05 19:39:10 +01:00
Alessandro Ranellucci
c00061678b
Use perimeter extruder for brim. #618
2014-12-17 00:45:05 +01:00
Alessandro Ranellucci
e79aa2e81c
New --solid-infill-extruder option. Includes a refactoring of the strategy used to order layer extrusions according to their extruder and island; toolchanges and travel moves should be more optimized now. #618
2014-12-17 00:34:00 +01:00
Alessandro Ranellucci
7a7d00c8d6
Rename solid_fill_pattern to external_fill_pattern and clarify tooltip
2014-11-27 00:38:05 +01:00
Alessandro Ranellucci
ff9b53260d
New experimental feature for pressure management. Credits to @llluis for the original implementation. #1203 #1677 #2018
2014-11-24 18:22:39 +01:00
Alessandro Ranellucci
989ec5cf4d
Fixes to UTF-8 handling in file paths
2014-11-22 21:55:45 +01:00
Alessandro Ranellucci
c2e710d092
Removed --g0
2014-10-21 21:41:11 +02:00
Alessandro Ranellucci
0d2dcbc85b
Typo in command line help (wrong default for default_acceleration). #2283
2014-09-24 22:25:23 +02:00
Alessandro Ranellucci
73b3c06361
Ported more things to XS
2014-09-21 10:51:36 +02:00
Alessandro Ranellucci
a776cf280b
New --split option
2014-08-03 16:08:04 +02:00
Alessandro Ranellucci
f81232b79d
Remove --bed-size from --help output
2014-07-04 10:56:06 +02:00
Alessandro Ranellucci
928335f186
Removed print_center option (but left --print-center from CLI)
2014-06-16 23:58:45 +02:00
Alessandro Ranellucci
ddac2d1570
Merged SkeinPanel into MainFrame
2014-06-14 19:54:18 +02:00
Alessandro Ranellucci
e3e69251cb
New XY Size Compensation option. #581 #56
2014-06-10 13:28:57 +02:00
Alessandro Ranellucci
3599bd0bae
Distinct extrusion width for external perimeters
2014-06-09 21:22:15 +02:00
Alessandro Ranellucci
342513a4de
Change: --save will now only save the specified options, without the defaults
2014-06-04 00:08:23 +02:00
Alessandro Ranellucci
88a2e5c791
Typo seal -> seam :-)
2014-05-24 22:10:28 +02:00
Alessandro Ranellucci
a3bd1b5302
New seal_position option that replaces randomize_start, start_perimeters_at_concave_points and start_perimeters_at_non_overhang. The two latter options are now always on by default. A new "Aligned" seal position value has been added, that forces starting points to be aligned when not randomized. #1741 #925
2014-05-22 19:34:49 +02:00
Alessandro Ranellucci
8ca352eb62
Separate speed option for support material interface. #2009
2014-05-21 15:21:20 +02:00
Alessandro Ranellucci
093d1cbe2f
Don't transfer ownership of Model to Print::Object
2014-05-07 01:11:49 +02:00
Y. Sapir
85bca96982
Add dir --output msg to README, too.
2014-04-27 14:21:59 +03:00
Y. Sapir
0224e72f8c
Add message about directories as parameters for --output.
2014-04-27 13:57:36 +03:00
Alessandro Ranellucci
ce9cf4d964
Don't put supports under bridges and potential bridges
2014-04-26 17:19:50 +02:00
Alessandro Ranellucci
4f5d9ca795
Finished --cut implementation
2014-04-25 12:40:21 +02:00
Alessandro Ranellucci
fe1691c151
New --cut feature
2014-04-25 10:20:30 +02:00
Alessandro Ranellucci
d2a6194960
Fix the 'extruder' behavior in CLI and test that Print::Simple accepts an incomplete DynamicConfig object
2014-04-05 10:18:00 +02:00
