| .. |
|
ExtrusionPath
|
Do each island completely if avoid_crossing_perimeters is enabled. #278
|
2013-03-10 16:09:03 +01:00 |
|
Fill
|
Bugfix: wrong flow and bad pattern rotation when infill-every-layers was set to an arbitrary high value
|
2013-03-17 01:10:40 +01:00 |
|
Format
|
Bugfix: crash when reading/writing files to paths containing non-ASCII characters on Windows. #651 #865
|
2013-01-13 10:18:34 +01:00 |
|
GCode
|
Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071
|
2013-04-04 01:17:44 +02:00 |
|
Geometry
|
Safer safety_offset() for ExPolygons
|
2013-03-26 13:57:37 +01:00 |
|
GUI
|
Bugfix: configuration wizard led to crash with simple mode. #1077
|
2013-04-03 19:26:59 +02:00 |
|
Layer
|
Allow 0.1mm slots. #959 #1056
|
2013-04-04 01:24:40 +02:00 |
|
Print
|
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
|
2013-03-30 11:22:12 +01:00 |
|
Config.pm
|
New wipe feature
|
2013-03-17 02:22:50 +01:00 |
|
ExPolygon.pm
|
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
|
2013-03-30 11:22:12 +01:00 |
|
Extruder.pm
|
New wipe feature
|
2013-03-17 02:22:50 +01:00 |
|
ExtrusionLoop.pm
|
Missing bit
|
2013-03-11 12:47:27 +01:00 |
|
ExtrusionPath.pm
|
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
|
2013-03-30 11:22:12 +01:00 |
|
Fill.pm
|
Refactoring: use the clone() method for inflating Surface objects
|
2013-03-29 19:18:06 +01:00 |
|
Flow.pm
|
Use full flow for sparse infill by default
|
2013-03-17 00:21:17 +01:00 |
|
GCode.pm
|
Don't wipe if option is disabled
|
2013-04-03 19:08:12 +02:00 |
|
Geometry.pm
|
Small optimization on an incredibly hot codepath.
|
2013-04-07 18:01:15 -04:00 |
|
GUI.pm
|
Move ObjectDialog to a separate file
|
2013-03-10 12:33:10 +01:00 |
|
Layer.pm
|
Factored out the layer height logic
|
2013-03-10 11:37:16 +01:00 |
|
Line.pm
|
Completed vibration limit
|
2012-11-17 12:08:19 +01:00 |
|
Model.pm
|
Slice a single object with multiple layer heights. :-)
|
2013-03-10 14:58:49 +01:00 |
|
Point.pm
|
Merge branch 'master' into avoid-crossing-perimeters
|
2013-01-12 19:00:18 +01:00 |
|
Polygon.pm
|
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
|
2013-03-30 11:22:12 +01:00 |
|
Polyline.pm
|
Merge branch 'wipe'
|
2013-03-31 11:36:04 +02:00 |
|
Print.pm
|
Bugfix: time estimates for cooling were computed for each object separately instead of the whole actual layer. #1071
|
2013-04-04 01:17:44 +02:00 |
|
Surface.pm
|
Bugfix: infill direction wasn't correctly alternated when infilling every 2 layers. #1068
|
2013-03-29 19:24:08 +01:00 |
|
SVG.pm
|
Added support for expolygons in Slic3r::SVG
|
2013-03-11 14:23:45 +01:00 |
|
Test.pm
|
Fix test framework detecting dE=0 as retraction
|
2013-03-18 18:01:01 +01:00 |
|
TriangleMesh.pm
|
Bugfix: horizontal projection for high-res models might show corrupted result
|
2013-03-17 15:39:51 +01:00 |
