415 lines
12 KiB
INI
415 lines
12 KiB
INI
# Print profiles for the Creality printers.
|
|
|
|
[vendor]
|
|
# Vendor name will be shown by the Config Wizard.
|
|
name = Creality
|
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
|
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
|
config_version = 0.0.1
|
|
# Where to get the updates from?
|
|
config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
|
|
# changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
|
|
|
# The printer models will be shown by the Configuration Wizard in this order,
|
|
# also the first model installed & the first nozzle installed will be activated after install.
|
|
# Printer model name will be shown by the installation wizard.
|
|
|
|
[printer_model:ENDER3]
|
|
name = Creality Ender-3
|
|
variants = 0.4
|
|
technology = FFF
|
|
|
|
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
|
# not make it into the user interface.
|
|
|
|
# Common print preset
|
|
[print:*common*]
|
|
avoid_crossing_perimeters = 0
|
|
bridge_angle = 0
|
|
bridge_flow_ratio = 0.95
|
|
bridge_speed = 25
|
|
brim_width = 0
|
|
clip_multipart_objects = 1
|
|
compatible_printers =
|
|
complete_objects = 0
|
|
dont_support_bridges = 1
|
|
elefant_foot_compensation = 0
|
|
ensure_vertical_shell_thickness = 1
|
|
external_fill_pattern = rectilinear
|
|
external_perimeters_first = 0
|
|
external_perimeter_extrusion_width = 0.45
|
|
extra_perimeters = 0
|
|
extruder_clearance_height = 25
|
|
extruder_clearance_radius = 45
|
|
extrusion_width = 0.45
|
|
fill_angle = 45
|
|
fill_density = 20%
|
|
fill_pattern = grid
|
|
first_layer_extrusion_width = 0.42
|
|
first_layer_height = 0.2
|
|
first_layer_speed = 20
|
|
gap_fill_speed = 30
|
|
gcode_comments = 0
|
|
infill_every_layers = 1
|
|
infill_extruder = 1
|
|
infill_extrusion_width = 0.45
|
|
infill_first = 0
|
|
infill_only_where_needed = 0
|
|
infill_overlap = 25%
|
|
interface_shells = 0
|
|
max_print_speed = 100
|
|
max_volumetric_extrusion_rate_slope_negative = 0
|
|
max_volumetric_extrusion_rate_slope_positive = 0
|
|
max_volumetric_speed = 0
|
|
min_skirt_length = 4
|
|
notes =
|
|
overhangs = 0
|
|
only_retract_when_crossing_perimeters = 0
|
|
ooze_prevention = 0
|
|
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
|
perimeters = 2
|
|
perimeter_extruder = 1
|
|
perimeter_extrusion_width = 0.45
|
|
post_process =
|
|
print_settings_id =
|
|
raft_layers = 0
|
|
resolution = 0
|
|
seam_position = nearest
|
|
single_extruder_multi_material_priming = 1
|
|
skirts = 1
|
|
skirt_distance = 2
|
|
skirt_height = 2
|
|
small_perimeter_speed = 25
|
|
solid_infill_below_area = 0
|
|
solid_infill_every_layers = 0
|
|
solid_infill_extruder = 1
|
|
solid_infill_extrusion_width = 0.45
|
|
spiral_vase = 0
|
|
standby_temperature_delta = -5
|
|
support_material = 0
|
|
support_material_extruder = 0
|
|
support_material_extrusion_width = 0.4
|
|
support_material_interface_extruder = 0
|
|
support_material_angle = 0
|
|
support_material_buildplate_only = 0
|
|
support_material_enforce_layers = 0
|
|
support_material_contact_distance = 0.15
|
|
support_material_interface_contact_loops = 0
|
|
support_material_interface_layers = 2
|
|
support_material_interface_spacing = 0.2
|
|
support_material_interface_speed = 100%
|
|
support_material_pattern = rectilinear
|
|
support_material_spacing = 2
|
|
support_material_speed = 40
|
|
support_material_synchronize_layers = 0
|
|
support_material_threshold = 45
|
|
support_material_with_sheath = 0
|
|
support_material_xy_spacing = 60%
|
|
thin_walls = 0
|
|
top_infill_extrusion_width = 0.45
|
|
top_solid_infill_speed = 40
|
|
travel_speed = 100
|
|
wipe_tower = 0
|
|
wipe_tower_bridging = 10
|
|
wipe_tower_rotation_angle = 0
|
|
wipe_tower_width = 60
|
|
wipe_tower_x = 170
|
|
wipe_tower_y = 140
|
|
xy_size_compensation = 0
|
|
|
|
[print:*0.12mm*]
|
|
inherits = *common*
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 25
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
layer_height = 0.12
|
|
perimeters = 3
|
|
top_infill_extrusion_width = 0.4
|
|
bottom_solid_layers = 6
|
|
top_solid_layers = 7
|
|
|
|
[print:*0.20mm*]
|
|
inherits = *common*
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 25
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
layer_height = 0.20
|
|
top_infill_extrusion_width = 0.4
|
|
bottom_solid_layers = 4
|
|
top_solid_layers = 5
|
|
|
|
[print:*0.24mm*]
|
|
inherits = *common*
|
|
perimeter_speed = 40
|
|
external_perimeter_speed = 25
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
layer_height = 0.24
|
|
top_infill_extrusion_width = 0.45
|
|
bottom_solid_layers = 3
|
|
top_solid_layers = 4
|
|
|
|
[print:0.12mm DETAIL ENDER3]
|
|
inherits = *0.12mm*
|
|
alias=0.12mm DETAIL
|
|
travel_speed = 150
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
support_material_extrusion_width = 0.38
|
|
compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.20mm NORMAL ENDER3]
|
|
inherits = *0.20mm*
|
|
alias=0.20mm NORMAL
|
|
travel_speed = 150
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
support_material_extrusion_width = 0.38
|
|
compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
|
|
|
|
[print:0.24mm DRAFT ENDER3]
|
|
inherits = *0.24mm*
|
|
alias=0.24mm DRAFT
|
|
travel_speed = 150
|
|
infill_speed = 50
|
|
solid_infill_speed = 40
|
|
top_solid_infill_speed = 30
|
|
support_material_extrusion_width = 0.38
|
|
compatible_printers_condition = printer_model=="ENDER3" and nozzle_diameter[0]==0.4
|
|
|
|
# Common filament preset
|
|
[filament:*common*]
|
|
cooling = 0
|
|
compatible_printers =
|
|
compatible_printers_condition =
|
|
extrusion_multiplier = 1
|
|
filament_cost = 0
|
|
filament_density = 0
|
|
filament_diameter = 1.75
|
|
filament_notes = ""
|
|
filament_settings_id = ""
|
|
filament_soluble = 0
|
|
min_print_speed = 15
|
|
slowdown_below_layer_time = 20
|
|
|
|
[filament:*PLA*]
|
|
inherits = *common*
|
|
bed_temperature = 40
|
|
fan_below_layer_time = 100
|
|
filament_colour = #FF3232
|
|
filament_max_volumetric_speed = 15
|
|
filament_type = PLA
|
|
filament_density = 1.24
|
|
filament_cost = 20
|
|
first_layer_bed_temperature = 40
|
|
first_layer_temperature = 215
|
|
fan_always_on = 1
|
|
cooling = 1
|
|
max_fan_speed = 100
|
|
min_fan_speed = 100
|
|
bridge_fan_speed = 100
|
|
disable_fan_first_layers = 1
|
|
temperature = 210
|
|
|
|
[filament:*PET*]
|
|
inherits = *common*
|
|
bed_temperature = 70
|
|
cooling = 1
|
|
disable_fan_first_layers = 3
|
|
fan_below_layer_time = 20
|
|
filament_colour = #FF8000
|
|
filament_max_volumetric_speed = 8
|
|
filament_type = PETG
|
|
filament_density = 1.27
|
|
filament_cost = 30
|
|
first_layer_bed_temperature =70
|
|
first_layer_temperature = 240
|
|
fan_always_on = 1
|
|
max_fan_speed = 50
|
|
min_fan_speed = 20
|
|
bridge_fan_speed = 100
|
|
temperature = 240
|
|
|
|
[filament:*ABS*]
|
|
inherits = *common*
|
|
bed_temperature = 100
|
|
cooling = 0
|
|
disable_fan_first_layers = 3
|
|
fan_below_layer_time = 20
|
|
filament_colour = #3A80CA
|
|
filament_max_volumetric_speed = 11
|
|
filament_type = PLA
|
|
filament_density = 1.04
|
|
filament_cost = 20
|
|
first_layer_bed_temperature = 100
|
|
first_layer_temperature = 245
|
|
fan_always_on = 0
|
|
max_fan_speed = 0
|
|
min_fan_speed = 0
|
|
bridge_fan_speed = 30
|
|
top_fan_speed = 0
|
|
temperature = 245
|
|
|
|
[filament:Generic PLA ENDER3]
|
|
inherits = *PLA*
|
|
alias=Generic PLA
|
|
|
|
[filament:Generic PET ENDER3]
|
|
inherits = *PET*
|
|
alias=Generic PET
|
|
|
|
[filament:Generic ABS ENDER3]
|
|
inherits = *ABS*
|
|
alias=Generic ABS
|
|
first_layer_bed_temperature = 90
|
|
bed_temperature = 90
|
|
|
|
[filament:Creality PLA ENDER3]
|
|
inherits = *PLA*
|
|
alias=Creality PLA
|
|
temperature = 205
|
|
bed_temperature = 40
|
|
first_layer_temperature = 210
|
|
first_layer_bed_temperature =40
|
|
|
|
[filament:Creality PET ENDER3]
|
|
inherits = *PET*
|
|
alias=Creality PET
|
|
temperature = 240
|
|
bed_temperature = 70
|
|
first_layer_temperature = 240
|
|
first_layer_bed_temperature =70
|
|
max_fan_speed = 40
|
|
min_fan_speed = 20
|
|
|
|
[filament:Creality ABS ENDER3]
|
|
inherits = *ABS*
|
|
alias=Creality ABS
|
|
temperature = 240
|
|
bed_temperature = 90
|
|
first_layer_temperature = 240
|
|
first_layer_bed_temperature =90
|
|
|
|
[filament:Prusament PLA ENDER3]
|
|
inherits = *PLA*
|
|
alias=Prusament PLA
|
|
temperature = 215
|
|
bed_temperature = 40
|
|
first_layer_temperature = 215
|
|
first_layer_bed_temperature =40
|
|
filament_cost = 24.99
|
|
filament_density = 1.24
|
|
|
|
[filament:Prusament PETG ENDER3]
|
|
inherits = *PET*
|
|
alias=Prusament PETG
|
|
temperature = 245
|
|
bed_temperature = 70
|
|
first_layer_temperature = 245
|
|
first_layer_bed_temperature =70
|
|
filament_cost = 24.99
|
|
filament_density = 1.27
|
|
|
|
# Common printer preset
|
|
[printer:*common*]
|
|
printer_technology = FFF
|
|
bed_shape = 0x0,200x0,200x200,0x200
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
|
between_objects_gcode =
|
|
deretract_speed = 0
|
|
extruder_colour = #FFFF00
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
silent_mode = 0
|
|
remaining_times = 0
|
|
machine_max_acceleration_e = 10000
|
|
machine_max_acceleration_extruding = 2000
|
|
machine_max_acceleration_retracting = 1500
|
|
machine_max_acceleration_x = 3000
|
|
machine_max_acceleration_y = 3000
|
|
machine_max_acceleration_z = 500
|
|
machine_max_feedrate_e = 120
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 12
|
|
machine_max_jerk_e = 2.5
|
|
machine_max_jerk_x = 20
|
|
machine_max_jerk_y = 20
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
max_layer_height = 0.3
|
|
min_layer_height = 0.07
|
|
max_print_height = 200
|
|
nozzle_diameter = 0.4
|
|
octoprint_apikey =
|
|
octoprint_host =
|
|
printer_notes =
|
|
printer_settings_id =
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 1
|
|
retract_length_toolchange = 1
|
|
retract_lift = 0
|
|
retract_lift_above = 0
|
|
retract_lift_below = 0
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 35
|
|
serial_port =
|
|
serial_speed = 250000
|
|
single_extruder_multi_material = 0
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG92 E0.0\nG1 Z0.15 F240\nG1 X60.0 E9.0 F800.0 ; intro line\nG1 X100.0 E12.5 F800 ; intro line\nG92 E0.0
|
|
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 F3000 ; home X axis\nM84 ; disable motors
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1
|
|
z_offset = 0
|
|
printer_model =
|
|
default_print_profile =
|
|
default_filament_profile =
|
|
|
|
[printer:Creality ENDER-3]
|
|
inherits = *common*
|
|
printer_model = ENDER3
|
|
printer_variant = 0.4
|
|
max_layer_height = 0.25
|
|
min_layer_height = 0.1
|
|
bed_shape = 0x0,220x0,220x220,0x220
|
|
max_print_height = 250
|
|
machine_max_acceleration_e = 5000
|
|
machine_max_acceleration_extruding = 500
|
|
machine_max_acceleration_retracting = 1000
|
|
machine_max_acceleration_x = 500
|
|
machine_max_acceleration_y = 500
|
|
machine_max_acceleration_z = 100
|
|
machine_max_feedrate_e = 60
|
|
machine_max_feedrate_x = 500
|
|
machine_max_feedrate_y = 500
|
|
machine_max_feedrate_z = 10
|
|
machine_max_jerk_e = 5
|
|
machine_max_jerk_x = 8
|
|
machine_max_jerk_y = 8
|
|
machine_max_jerk_z = 0.4
|
|
machine_min_extruding_rate = 0
|
|
machine_min_travel_rate = 0
|
|
printer_notes =
|
|
nozzle_diameter = 0.4
|
|
retract_before_travel = 2
|
|
retract_length = 5
|
|
retract_speed = 60
|
|
deretract_speed = 40
|
|
retract_before_wipe = 70%
|
|
default_print_profile = 0.20mm NORMAL
|
|
default_filament_profile = Creality PLA
|
|
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E30 F1200.0 ; intro line\nG92 E0.0
|
|
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y200 F3000 ; present print\nM84 X Y E ; disable motors |