181 lines
8.8 KiB
Markdown
181 lines
8.8 KiB
Markdown
# Step by Step Visual Studio 2019 Instructions
|
|
|
|
### Install the tools
|
|
|
|
Install Visual Studio Community 2019 from [visualstudio.microsoft.com/vs/](https://visualstudio.microsoft.com/vs/). Older versions are not supported as PrusaSlicer requires support for C++17.
|
|
Select all workload options for C++
|
|
|
|
Install git for Windows from [gitforwindows.org](https://gitforwindows.org/)
|
|
Download and run the exe accepting all defaults
|
|
|
|
### Download sources
|
|
|
|
Clone the respository. To place it in C:\src\PrusaSlicer, run:
|
|
```
|
|
c:> mkdir src
|
|
c:> cd src
|
|
c:\src> git clone https://github.com/prusa3d/PrusaSlicer.git
|
|
```
|
|
|
|
### Compile the dependencies.
|
|
Dependencies are updated seldomly, thus they are compiled out of the PrusaSlicer source tree.
|
|
Go to the Windows Start Menu and Click on "Visual Studio 2019" folder, then select the ->"x64 Native Tools Command Prompt" to open a command window and run the following:
|
|
```
|
|
cd c:\src\PrusaSlicer\deps
|
|
mkdir build
|
|
cd build
|
|
cmake .. -G "Visual Studio 16 2019" -DDESTDIR="c:\src\PrusaSlicer-deps"
|
|
|
|
msbuild /m ALL_BUILD.vcxproj // This took 13.5 minutes on my machine: core I7-7700K @ 4.2Ghz with 32GB main memory and 20min on a average laptop
|
|
```
|
|
|
|
### Generate Visual Studio project file for PrusaSlicer, referencing the precompiled dependencies.
|
|
Go to the Windows Start Menu and Click on "Visual Studio 2019" folder, then select the ->"x64 Native Tools Command Prompt" to open a command window and run the following:
|
|
```
|
|
cd c:\src\PrusaSlicer\
|
|
mkdir build
|
|
cd build
|
|
cmake .. -G "Visual Studio 16 2019" -DCMAKE_PREFIX_PATH="c:\src\PrusaSlicer-deps\usr\local"
|
|
```
|
|
|
|
Note that `CMAKE_PREFIX_PATH` must be absolute path. A relative path like "..\..\PrusaSlicer-deps\usr\local" does not work.
|
|
|
|
### Compile PrusaSlicer.
|
|
|
|
Double-click c:\src\PrusaSlicer\build\PrusaSlicer.sln to open in Visual Studio 2019.
|
|
OR
|
|
Open Visual Studio for C++ development (VS asks this the first time you start it).
|
|
|
|
Select PrusaSlicer_app_gui as your startup project (right-click->Set as Startup Project).
|
|
|
|
Run Build->Rebuild Solution once to populate all required dependency modules. This is NOT done automatically when you build/run. If you run both Debug and Release variants, you will need to do this once for each.
|
|
|
|
Debug->Start Debugging or press F5
|
|
|
|
PrusaSlicer should start. You're up and running!
|
|
|
|
note: Thanks to @douggorgen for the original guide, as an answer for a issue
|
|
|
|
|
|
# The below information is out of date, but still useful for reference purposes
|
|
|
|
We have switched to MS Visual Studio 2019.
|
|
|
|
We don't use MSVS 2013 any more. At the moment we are in the process of creating new pre-built dependency bundles
|
|
and updating this document. In the meantime, you will need to compile the dependencies yourself
|
|
[the same way as before](#building-the-dependencies-package-yourself)
|
|
except with CMake generators for MSVS 2019 instead of 2013.
|
|
|
|
Thank you for understanding.
|
|
|
|
---
|
|
|
|
# Building PrusaSlicer on Microsoft Windows
|
|
|
|
~~The currently supported way of building PrusaSlicer on Windows is with CMake and MS Visual Studio 2013.
|
|
You can use the free [Visual Studio 2013 Community Edition](https://www.visualstudio.com/vs/older-downloads/).
|
|
CMake installer can be downloaded from [the official website](https://cmake.org/download/).~~
|
|
|
|
~~Building with newer versions of MSVS (2015, 2017) may work too as reported by some of our users.~~
|
|
|
|
_Note:_ Thanks to [**@supermerill**](https://github.com/supermerill) for testing and inspiration for this guide.
|
|
|
|
### Dependencies
|
|
|
|
On Windows PrusaSlicer is built against statically built libraries.
|
|
~~We provide a prebuilt package of all the needed dependencies. This package only works on Visual Studio 2013, so~~ if you are using a newer version of Visual Studio, you need to compile the dependencies yourself as per [below](#building-the-dependencies-package-yourself).
|
|
The package comes in a several variants:
|
|
|
|
- ~~64 bit, Release mode only (41 MB, 578 MB unpacked)~~
|
|
- ~~64 bit, Release and Debug mode (88 MB, 1.3 GB unpacked)~~
|
|
- ~~32 bit, Release mode only (38 MB, 520 MB unpacked)~~
|
|
- ~~32 bit, Release and Debug mode (74 MB, 1.1 GB unpacked)~~
|
|
|
|
When unsure, use the _Release mode only_ variant, the _Release and Debug_ variant is only needed for debugging & development.
|
|
|
|
If you're unsure where to unpack the package, unpack it into `C:\local\` (but it can really be anywhere).
|
|
|
|
Alternatively you can also compile the dependencies yourself, see below.
|
|
|
|
### Building PrusaSlicer with Visual Studio
|
|
|
|
First obtain the PrusaSlicer sources via either git or by extracting the source archive.
|
|
|
|
Then you will need to note down the so-called 'prefix path' to the dependencies, this is the location of the dependencies packages + `\usr\local` appended.
|
|
For example on 64 bits this would be `C:\local\destdir-64\usr\local`. The prefix path will need to be passed to CMake.
|
|
|
|
When ready, open the relevant Visual Studio command line and `cd` into the directory with PrusaSlicer sources.
|
|
Use these commands to prepare Visual Studio solution file:
|
|
|
|
mkdir build
|
|
cd build
|
|
cmake .. -G "Visual Studio 12 Win64" -DCMAKE_PREFIX_PATH="<insert prefix path here>"
|
|
|
|
Note that if you're building a 32-bit variant, you will need to change the `"Visual Studio 12 Win64"` to just `"Visual Studio 12"`.
|
|
|
|
Conversely, if you're using Visual Studio version other than 2013, the version number will need to be changed accordingly.
|
|
|
|
If `cmake` has finished without errors, go to the build directory and open the `PrusaSlicer.sln` solution file in Visual Studio.
|
|
Before building, make sure you're building the right project (use one of those starting with `PrusaSlicer_app_...`) and that you're building
|
|
with the right configuration, i.e. _Release_ vs. _Debug_. When unsure, choose _Release_.
|
|
Note that you won't be able to build a _Debug_ variant against a _Release_-only dependencies package.
|
|
|
|
#### Installing using the `INSTALL` project
|
|
|
|
PrusaSlicer can be run from the Visual Studio or from Visual Studio's build directory (`src\Release` or `src\Debug`),
|
|
but for longer-term usage you might want to install somewhere using the `INSTALL` project.
|
|
By default, this installs into `C:\Program Files\PrusaSlicer`.
|
|
To customize the install path, use the `-DCMAKE_INSTALL_PREFIX=<path of your choice>` when invoking `cmake`.
|
|
|
|
### Building from the command line
|
|
|
|
There are several options for building from the command line:
|
|
|
|
- [msbuild](https://docs.microsoft.com/en-us/visualstudio/msbuild/msbuild-reference?view=vs-2017&viewFallbackFrom=vs-2013)
|
|
- [Ninja](https://ninja-build.org/)
|
|
- [nmake](https://docs.microsoft.com/en-us/cpp/build/nmake-reference?view=vs-2017)
|
|
|
|
To build with msbuild, use the same CMake command as in previous paragraph and then build using
|
|
|
|
msbuild /m /P:Configuration=Release ALL_BUILD.vcxproj
|
|
|
|
To build with Ninja or nmake, replace the `-G` option in the CMake call with `-G Ninja` or `-G "NMake Makefiles"` , respectively.
|
|
Then use either `ninja` or `nmake` to start the build.
|
|
|
|
To install, use `msbuild /P:Configuration=Release INSTALL.vcxproj` , `ninja install` , or `nmake install` .
|
|
|
|
### Building the dependencies package yourself
|
|
|
|
The dependencies package is built using CMake scripts inside the `deps` subdirectory of PrusaSlicer sources.
|
|
(This is intentionally not interconnected with the CMake scripts in the rest of the sources.)
|
|
|
|
Open the preferred Visual Studio command line (64 or 32 bit variant) and `cd` into the directory with PrusaSlicer sources.
|
|
Then `cd` into the `deps` directory and use these commands to build:
|
|
|
|
mkdir build
|
|
cd build
|
|
cmake .. -G "Visual Studio 12 Win64" -DDESTDIR="C:\local\destdir-custom"
|
|
msbuild /m ALL_BUILD.vcxproj
|
|
|
|
You can also use the Visual Studio GUI or other generators as mentioned above.
|
|
|
|
The `DESTDIR` option is the location where the bundle will be installed.
|
|
This may be customized. If you leave it empty, the `DESTDIR` will be placed inside the same `build` directory.
|
|
|
|
Warning: If the `build` directory is nested too deep inside other folders, various file paths during the build
|
|
become too long and the build might fail due to file writing errors (\*). For this reason, it is recommended to
|
|
place the `build` directory relatively close to the drive root.
|
|
|
|
Note that the build variant that you may choose using Visual Studio (i.e. _Release_ or _Debug_ etc.) when building the dependency package is **not relevant**.
|
|
The dependency build will by default build _both_ the _Release_ and _Debug_ variants regardless of what you choose in Visual Studio.
|
|
You can disable building of the debug variant by passing the
|
|
|
|
-DDEP_DEBUG=OFF
|
|
|
|
option to CMake, this will only produce a _Release_ build.
|
|
|
|
Refer to the CMake scripts inside the `deps` directory to see which dependencies are built in what versions and how this is done.
|
|
|
|
\*) Specifically, the problem arises when building boost. Boost build tool appends all build options into paths of
|
|
intermediate files, which are not handled correctly by either `b2.exe` or possibly `ninja` (?).
|