Remove Tevo Tarantula

printer/Tevo Tarantula Dual.ini

@@ -1,79 +0,0 @@
-# generated by PrusaSlicer 2.5.2+linux-x64-GTK3 on 2023-05-01 at 21:15:29 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,200x0,200x200,0x200
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n
-between_objects_gcode = 
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = 
-default_print_profile = 
-deretract_speed = 0,0
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n\nM104 S0  ; turn off hotend temperature\nM140 S40 ; set heatbed to 40C\n\nG28 X0  ; home X axis\nG1 Y200 ; move pirint bed to the front\n\nM84     ; disable motors\n
-extra_loading_move = 0
-extruder_colour = #33D17A;#000000
-extruder_offset = 0x0,0x0
-gcode_flavor = marlin2
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 5000,5000
-machine_max_acceleration_extruding = 1250,1250
-machine_max_acceleration_retracting = 1250,1250
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 800,800
-machine_max_acceleration_y = 800,800
-machine_max_acceleration_z = 500,200
-machine_max_feedrate_e = 80,80
-machine_max_feedrate_x = 200,200
-machine_max_feedrate_y = 120,120
-machine_max_feedrate_z = 12,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 8,8
-machine_max_jerk_y = 8,8
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0,0
-max_print_height = 170
-min_layer_height = 0.07,0.07
-nozzle_diameter = 0.4,0.4
-parking_pos_retraction = 0
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = Tevo Tarantula Dual
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2,2
-retract_before_wipe = 0%,0%
-retract_layer_change = 0,0
-retract_length = 5,5
-retract_length_toolchange = 10,10
-retract_lift = 0,0
-retract_lift_above = 0,0
-retract_lift_below = 0,0
-retract_restart_extra = 0,0
-retract_restart_extra_toolchange = 0,0
-retract_speed = 35,35
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\n\nG1 Y0 F1000\nG1 Z0.4 F1000\n\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\n\nG1 Z0.3 F1000\nG92 E0\nG1 X200 E54 F2200\nG1 Y0 F1000\nG1 X55 E55 F1400\nG1 Z0.2 F1000\nG1 X5 E60 F1000\nG92 E0
-template_custom_gcode = 
-thumbnails = 
-thumbnails_format = PNG
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1,1
-z_offset = 0

printer/Tevo Tarantula.ini

@@ -1,78 +0,0 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-03-31 at 16:49:58 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,200x0,200x200,0x200
-before_layer_gcode = 
-between_objects_gcode = 
-color_change_gcode = M600
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-default_filament_profile = 
-default_print_profile = 
-deretract_speed = 0
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n\nM104 S0  ; turn off hotend temperature\nM140 S40 ; set heatbed to 40C\n\nG28 X0  ; home X axis\nG1 Y200 ; move pirint bed to the front\n\nM84     ; disable motors\n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin2
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 5000,5000
-machine_max_acceleration_extruding = 1250,1250
-machine_max_acceleration_retracting = 1250,1250
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 1000,1000
-machine_max_acceleration_y = 1000,1000
-machine_max_acceleration_z = 500,200
-machine_max_feedrate_e = 100,100
-machine_max_feedrate_x = 200,200
-machine_max_feedrate_y = 200,200
-machine_max_feedrate_z = 12,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 8,8
-machine_max_jerk_y = 8,8
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 170
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-parking_pos_retraction = 92
-pause_print_gcode = M601
-print_host = 
-printer_model = 
-printer_notes = 
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 0.8
-retract_length_toolchange = 10
-retract_lift = 0.4
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all axes\nG29 ; Bed level\nG1 X0 Y0 F5000; Move to 0,0\nG1 Z5 F5000 ; lift nozzle\n
-template_custom_gcode = 
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0